Revision 002B787-81205-SB270055-00 RB Issue 002reduced · 37 pages · 1.5 MB

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-2712; AD 2026-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2026-2712 (document 0002) · AD 2026-20-10

Manufacturer
Boeing
Type
Alert Requirements Bulletin
Number
B787-81205-SB270055-00 RB
Latest revision known
B787-81205-SB270055-00 RB, Issue 002, dated November 25, 2024

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 37Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-2712; AD 2026-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '541da3d9dd0e76adcf47f09ef3ccb4579289e77b743973e553a82038fab75e76'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

ALERT Alert Requirements Bulletin B787-81205-SB270055-00 RB FLIGHT CONTROLS - Leading Edge Slat System - Leading Edge Outboard Lockout Actuator Change Copyright © 2024 The Boeing Company Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

EXPORT CONTROLLED This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.

ECCN: 9E991 B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 1 of 37 Export Controlled ECCN: 9E991 See page 1 for details

2.0 B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Table of Contents Page

Revision Transmittal Information3

A. EFFECTIVITY5

1. Airplanes5

2. Spares Affected7

B. CONCURRENT REQUIREMENTS7

C. COMPLIANCE7

D. APPROVAL9

E. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 0

1. General Information ........................................... 1 0

2. Work Instructions ............................................ 1 1 TASK 1 – SLAT 2 LEADING EDGE OUTBOARD LOCKOUT ACTUATOR INSTALLATION [Group 1] . . 15 TASK 2 – SLAT 2 LEADING EDGE OUTBOARD LOCKOUT ACTUATOR INSTALLATION [Group 2] . . 21 TASK 3 – SLAT 11 LEADING EDGE OUTBOARD LOCKOUT ACTUATOR INSTALLATION [Group 1] . 27 TASK 4 – SLAT 11 LEADING EDGE OUTBOARD LOCKOUT ACTUATOR INSTALLATION [Group 2] . 33 B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 2 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Alert Requirements Bulletin B787-81205-SB270055-00 RB FLIGHT CONTROLS - Leading Edge Slat System - Leading Edge Outboard Lockout Actuator Change Revision Transmittal Information

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:

THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE

BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

This revision includes all pages of the requirements bulletin.

1. COMPLIANCE INFORMATION RELATED TO THIS REVISION Effects of this revision on Airplanes on which Issue 001 was previously done:

None.

2. REASON FOR REVISION This issue is sent to add line number (LN) 1174 to the bulletin effectivity and add European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approval statement.

These sections were changed:

- In the Effectivity, added LN 1174 to the bulletin effectivity.

- In Approval, changed approval paragraph to add EASA/JAA approval statement.

- In Task 1 thru Task 4, changed Figure 1 annotation.

- In Task 1 thru Task 4, updated Marker installation location footnote.

3. REVISION HISTORY Table 1 Service BulletinService BulletinRequirement BulletinRequirement Bulletin 787-27A0055787-27A0055787-27A0055 RB787-27A0055 RB Issue DateIssue Date December 12, 2023Issue 1:December 12, 2023Issue 1:

B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 3 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Table 1 November 25, 2024Issue 2:November 25, 2024Issue 2:

B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 4 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:

THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE

BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

A. EFFECTIVITY

1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-687, 689-954, 956- 970, 972-982, 984-989, 991-997, 999-1008, 1012-1013, 1016-1019, 1021-1027, 1029-1032, 1035, 1038-1041, 1044-1045, 1047-1048, 1051, 1054-1064, 1066, 1069, 1071-1072, 1074-1075, 1077, 1080-1082, 1085-1087, 1091-1095, 1098-1099, 1103, 1107, 1109, 1111-1115, 1117-1119, 1121- 1122, 1124-1127, 1129-1149, 1151, 1153-1155, 1157, 1159, 1161-1163, 1166-1167, 1174 in 2 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.

NOTE: The Variable Number table below includes affected airplanes available as of the issue date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com after the issue date of this bulletin will be shown using the Maintenance Performance Toolbox EFFECTIVITY search function result.

Table 1

DESCRIPTIONCONFIGURATIONGROUP 787-8, 787-9 and 787-10 Airplanes with a Geared Rotary Actuator (GRA) installed at outboard slat 2 and 11 that do not have a fastener hole on the inner track rib.

- 1 787-8, 787-9 and 787-10 Airplanes with a Geared Rotary Actuator (GRA) installed at outboard slat 2 and 11 that have an existing fastener hole on the inner track rib.

- 2 Airplane Models: 787-10, 787-8, 787-9 Table 2 GroupVariable Number 1ZA006 1ZA100 - ZA105 1ZA116 - ZA124 GroupVariable Number 1ZA135 - ZA144 1ZA152 - ZA156 1ZA175 - ZA189 GroupVariable Number 1ZA195 - ZA204 1ZA215 - ZA225 1ZA230 - ZA256 B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 5 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

GroupVariable Number 1ZA260 - ZA277 1ZA285 - ZA296 1ZA317 - ZA324 1ZA327 1ZA334 - ZA335 1ZA341 - ZA342 1ZA380 - ZA389 1ZA430 - ZA439 1ZA445 - ZA489 1ZA506 - ZA516 1ZA536 - ZA545 1ZA560 - ZA567 1ZA576 - ZA580 1ZA586 1ZA588 - ZA593 1ZA610 - ZA617 1ZA650 - ZA652 1ZA655 - ZA663 1ZA665 - ZA677 1ZA680 - ZA685 1ZA695 - ZA698 1ZA715 - ZA716 1ZA718 - ZA719 1ZA740 - ZA741 1ZA768 - ZA769 1ZA778 - ZA779 1ZA783 - ZA784 1ZA817 - ZA831 1ZA839 1ZA841 - ZA842 1ZA846 - ZA848 GroupVariable Number 1ZA853 - ZA862 2ZA864 1ZA873 - ZA876 1ZA881 - ZA888 1ZA916 - ZA920 1ZA949 - ZA950 1ZA954 - ZA959 1ZA963 - ZA966 1ZA968 - ZA972 1ZA980 2ZA981 1ZA990 1ZB001 - ZB012 1ZB021 - ZB043 1ZB047 - ZB060 1ZB077 - ZB081 1ZB097 - ZB121 1ZB127 - ZB136 1ZB167 - ZB191 1ZB197 - ZB198 1ZB217 1ZB219 - ZB220 1ZB224 - ZB229 1ZB234 - ZB242 1ZB246 - ZB248 1ZB251 - ZB258 1ZB261 - ZB262 1ZB265 - ZB282 1ZB299 1ZB302 - ZB305 1ZB332 - ZB338 GroupVariable Number 1ZB362 - ZB379 1ZB407 - ZB435 1ZB446 - ZB467 1ZB536 - ZB543 1ZB545 - ZB547 1ZB558 - ZB587 2ZB588 1ZB603 - ZB618 1ZB646 - ZB649 1ZB656 - ZB666 1ZB676 - ZB681 1ZB688 - ZB707 1ZB733 - ZB735 1ZB738 - ZB740 1ZB742 - ZB745 1ZB749 - ZB750 1ZB753 - ZB757 1ZB763 - ZB768 1ZB771 - ZB775 1ZB778 - ZB821 1ZB828 - ZB841 1ZB858 - ZB863 1ZB874 - ZB876 1ZB887 1ZB890 1ZB893 - ZB902 1ZB908 - ZB918 1ZB922 1ZB924 1ZB926 - ZB927 1ZB934 - ZB952 B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 6 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

GroupVariable Number 1ZB967 - ZB971 1ZB977 - ZB978 1ZB980 - ZB986 1ZB990 - ZB991 1ZB993 - ZB997 1ZC001 - ZC016 1ZC018 - ZC021 2ZC022 1ZC036 - ZC056 1ZC061 - ZC070 1ZC101 - ZC107 1ZC116 - ZC118 1ZC126 - ZC129 1ZC151 - ZC152 1ZC155 - ZC158 1ZC165 1ZC211 - ZC219 1ZC221 - ZC227 2ZC228 1ZC239 - ZC241 GroupVariable Number 1ZD001 - ZD009 1ZD012 - ZD029 1ZD048 - ZD049 1ZE001 - ZE006 1ZE008 1ZE013 1ZE016 - ZE017 1ZE031 - ZE032 1ZE040 - ZE045 1ZE048 1ZE075 1ZE085 - ZE086 1ZE090 - ZE091 1ZE095 - ZE096 2ZE097 1ZE100 1ZE105 - ZE108 1ZE110 - ZE112 1ZE115 1ZE150 GroupVariable Number 1ZE165 - ZE166 1ZE170 - ZE171 1ZE195 - ZE198 1ZE220 - ZE239 2ZE240 - ZE241 1ZE270 - ZE273 1ZE310 - ZE311 1ZE340 - ZE341 1ZE350 - ZE362 1ZE375 1ZE380 - ZE381 1ZE415 - ZE417 1ZE419 - ZE420 1ZE425 - ZE428 1ZE435 - ZE437 1ZE455 - ZE456 1ZE481 1ZE486 - ZE488 -- --

2. Spares Affected None.

B. CONCURRENT REQUIREMENTS None.

C. COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2019-20-07 is related to Requirements Bulletin B787-81205-SB270055-00 RB. The effective date of AD 2019-20-07 is October 11, 2019.

The FAA will possibly release an additional Airworthiness Directive related to Requirements Bulletin B787- 81205-SB270055-00 RB. The additional Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB270055-00 RB mandatory.

B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 7 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Accomplish the required action, based on the applicable condition in Table 4 and Table 5 in accordance with the Accomplishment Instructions.

Table 4 Leading Edge Outboard Lockout Actuator Installation at Slat 2 and Slat 11 Outboard Locations Repeat Interval (Not to Exceed) Boeing Recommended Compliance TimeActionCondition -Whichever occurs later;At Leading Edge Slat 2 and Slat 11 outboard locations, replace the leading edge outboard Geared Rotary Actuator (GRA) with Leading Edge Outboard Lockout Actuator (LEOLA).

All Airplanes

1. Within 36 months after the Issue 001 date of Requirements Bulletin B787-81205- SB270055-00 RB.

2. Within 36 months after the date of issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness.

Table 5 Maintenance Program Review Repeat Interval (Not to Exceed) Boeing Recommended Compliance TimeActionCondition -Whichever occurs later;Do a review of operator's maintenance program to determine incorporation of Certification Maintenance Requirements (CMRs) document D011Z009-03-03 CMR Item Number 27-CMR-14 "Functionally check the Leading Edge Power Drive Unit Half System Torque Brake."

All Airplanes

1. Within 36 months after the Issue 001 date of Requirements Bulletin B787-81205- SB270055-00 RB.

2. Within 36 months after the date of issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness.

-Whichever occurs later;Incorporate CMRs document D011Z009-03-03 CMR Item Number 27-CMR-14 into the operator's maintenance program.

CONDITION 1:

CMRs document D011Z009-03-03 CMR Item Number 27-CMR-14 is not incorporated into the operator's maintenance program.

1. Within 36 months after the Issue 001 date of Requirements Bulletin B787-81205- SB270055-00 RB.

2. Within 36 months after the date of issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness.

B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 8 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Table 5 Maintenance Program Review Repeat Interval (Not to Exceed) Boeing Recommended Compliance TimeActionCondition --No further action required.

CONDITION 2:

CMRs document D011Z009-03-03 CMR Item Number 27-CMR-14 is incorporated into the operator's maintenance program.

D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.

In addition, the Manager of the FAA Continued Operational Safety Branch approves the (1) action (i.e., inspection or modification) defined in this Requirements Bulletin, (2) incorporation of the Airplane Flight Manual (AFM) Certificate Limitations Chapter revision associated with this bulletin, and (3) incorporation of Certification Maintenance Requirement (CMR) Item Number 27-CMR-14 into an operator's maintenance or inspection program as an Alternative Method of Compliance (AMOC) to accomplishing the requirements of paragraphs (g), (i), and (j) of AD 2019-20-07. All provisions of AD 2019-20-07 that are not specifically referenced in the above statement remain fully applicable and must be complied with accordingly.

B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 9 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

E. ACCOMPLISHMENT INSTRUCTIONS

1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the Work Instructions is for reference only. The procedures in that column are not required by the AD and are for guidance only. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC; this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.

2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.

3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.

4. The compliance times for the actions in Work Instructions are in Compliance.

5. Unless shown differently, these dimensions and tolerances are used:

– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51 – Torque Values:

– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter

51.

– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Maintenance Manual (AMM).

B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 10 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).

– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Maintenance Manual (AMM).

– Non-standard torque values for maintenance tasks are included in the applicable installation step.

6. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.

7. If the length of any fastener specified in this service bulletin does not meet the installation standards in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards in SRM Chapter 51 may be used. In addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation in this service bulletin.

8. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.

9. If shading is used, shaded areas in Tasks are to separate the non-critical and non-authoritative information from the critical and authoritative information.

10. Use of colors in Tasks is based on guidance from the S1000D International specification for technical publications.

2. WORK INSTRUCTIONS A. Actions Required for Compliance

(1) Requirements B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 11 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Table 1 Leading Edge Outboard Lockout Actuator Installation at Slat 2 and Slat 11 Outboard Locations Refer to the listed procedures in SB B787-81205- SB270055-00 Issue 001 or later approved issues as an accepted procedure Method of ComplianceActionCondition PART 1: PREPARE FOR ACCESS -At Leading Edge Slat 2 outboard location, replace the leading edge outboard Geared Rotary Actuator (GRA) with Leading Edge Outboard Lockout Actuator (LEOLA).

All Airplanes PART 2: LEADING EDGE SLAT 2 OUTBOARD

OPEN ACCESS PART 3: LEADING EDGE SLAT 2 OUTBOARD

GEARED ROTARY ACTU-

ATOR (GRA) REMOVAL -Group 1:

Task 1 Group 2:

Task 2 PART 1: PREPARE FOR ACCESS -At Leading Edge Slat 11 outboard location, replace the leading edge outboard GRA with LEOLA. PART 4: LEADING EDGESLAT 11 OUTBOARD

OPEN ACCESS PART 5: LEADING EDGE SLAT 11 OUTBOARD

GEARED ROTARY ACTU-

ATOR (GRA) REMOVAL -Group 1:

Task 3 Group 2:

Task 4 PART 6: RIGGING,

CLOSE ACCESS AND TEST -- B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM Page 12 of 37 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB270055-00 RB Issue 002, 25 Nov 2024 12:00:00 AM

REQUIREMENTS BULLETIN