On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 9
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2008; AD 2024-22-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'dd7e0e57df26a1b44debb033fcc681383dfcce5c298af58aa96ec96d7c18a02f' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'dd7e0e57df26a1b44debb033fcc681383dfcce5c298af58aa96ec96d7c18a02f' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ALERT Alert Requirements Bulletin B787-81205-SB320048-00 RB LANDING GEAR
- Main Landing Gear - Drag Brace Lower Lock Link Assembly Replacement Copyright © 2023 The Boeing Company Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991 B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM Page 1 of 9 Export Controlled ECCN: 9E991 See page 1 for details
4.0 B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN
Table of Contents Page
A. EFFECTIVITY3
1. Airplanes3
2. Spares Affected5
B. CONCURRENT REQUIREMENTS5
C. COMPLIANCE5
D. APPROVAL6
E. ACCOMPLISHMENT INSTRUCTIONS7
1. General Information7
2. Work Instructions8
B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM Page 2 of 9 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-1168 in 1 Group(s).
Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group information for the applicable airplanes is given below.
Table 1
DESCRIPTIONCONFIGURATIONGROUP 787-8, 787-9 and 787-10 Airplanes-1 Airplane Models: 787-10, 787-8, 787-9 Table 2 GroupVariable Number 1ZA006 1ZA100 - ZA105 1ZA116 - ZA124 1ZA135 - ZA144 1ZA152 - ZA156 1ZA175 - ZA189 1ZA195 - ZA204 1ZA215 - ZA225 1ZA230 - ZA256 1ZA260 - ZA277 1ZA285 - ZA296 1ZA317 - ZA324 GroupVariable Number 1ZA327 1ZA334 - ZA335 1ZA341 - ZA342 1ZA380 - ZA389 1ZA430 - ZA439 1ZA445 - ZA489 1ZA506 - ZA516 1ZA536 - ZA545 1ZA560 - ZA567 1ZA576 - ZA580 1ZA586 1ZA588 - ZA593 GroupVariable Number 1ZA610 - ZA617 1ZA650 - ZA652 1ZA655 - ZA663 1ZA665 - ZA677 1ZA680 - ZA685 1ZA695 - ZA698 1ZA715 - ZA716 1ZA718 - ZA719 1ZA740 - ZA741 1ZA768 - ZA769 1ZA778 - ZA779 1ZA783 - ZA784 B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM Page 3 of 9 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN
GroupVariable Number 1ZA817 - ZA831 1ZA839 1ZA841 - ZA842 1ZA846 - ZA848 1ZA853 - ZA864 1ZA873 - ZA876 1ZA881 - ZA888 1ZA916 - ZA920 1ZA949 - ZA950 1ZA954 - ZA959 1ZA963 - ZA966 1ZA968 - ZA972 1ZA980 - ZA981 1ZA990 1ZB001 - ZB012 1ZB021 - ZB043 1ZB047 - ZB061 1ZB077 - ZB081 1ZB097 - ZB121 1ZB127 - ZB136 1ZB167 - ZB191 1ZB197 - ZB198 1ZB217 1ZB219 - ZB220 1ZB224 - ZB229 1ZB234 - ZB242 1ZB246 - ZB248 1ZB251 - ZB258 1ZB261 - ZB262 1ZB265 - ZB282 1ZB299 GroupVariable Number 1ZB302 - ZB305 1ZB332 - ZB338 1ZB362 - ZB379 1ZB407 - ZB435 1ZB446 - ZB467 1ZB536 - ZB543 1ZB545 - ZB547 1ZB558 - ZB587 1ZB603 - ZB618 1ZB646 - ZB649 1ZB656 - ZB669 1ZB676 - ZB681 1ZB688 - ZB707 1ZB733 - ZB735 1ZB738 - ZB740 1ZB742 - ZB745 1ZB749 - ZB751 1ZB753 - ZB757 1ZB763 - ZB769 1ZB771 - ZB775 1ZB778 - ZB821 1ZB828 - ZB845 1ZB858 - ZB863 1ZB874 - ZB876 1ZB887 1ZB890 1ZB893 - ZB922 1ZB924 1ZB926 - ZB927 1ZB934 - ZB952 1ZB967 - ZB971 GroupVariable Number 1ZB977 - ZB991 1ZB993 - ZB997 1ZC001 - ZC022 1ZC036 - ZC056 1ZC061 - ZC070 1ZC101 - ZC107 1ZC116 - ZC118 1ZC126 - ZC129 1ZC151 - ZC152 1ZC155 - ZC162 1ZC165 1ZC170 - ZC173 1ZC211 - ZC219 1ZC221 - ZC228 1ZC236 - ZC241 1ZC276 1ZD001 - ZD009 1ZD012 - ZD029 1ZD038 1ZD048 - ZD049 1ZE001 - ZE010 1ZE013 - ZE014 1ZE016 - ZE019 1ZE031 - ZE032 1ZE040 - ZE048 1ZE075 1ZE085 - ZE086 1ZE090 - ZE091 1ZE095 - ZE097 1ZE100 1ZE105 - ZE108 B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM Page 4 of 9 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN
GroupVariable Number 1ZE110 - ZE112 1ZE115 1ZE150 1ZE165 - ZE166 1ZE170 - ZE171 1ZE195 - ZE198 1ZE220 - ZE241 1ZE270 - ZE273 GroupVariable Number 1ZE310 - ZE315 1ZE340 - ZE341 1ZE350 - ZE362 1ZE375 1ZE380 - ZE381 1ZE383 - ZE384 1ZE415 - ZE420 1ZE425 - ZE428 GroupVariable Number 1ZE435 - ZE437 1ZE455 - ZE456 1ZE481 1ZE486 - ZE488 1ZE491 - ZE493 1ZE581 1ZE586 1ZE601 - ZE602
2. Spares Affected Examine your spares supply for the parts or components identified below. If any parts or components are found, refer to Material Information - Paragraph 3., Part Necessary for Each Airplane for the recommended action.
Table 3 Serial NumberPart Number 19ZHQ00772513Z2010-501 19ZHQ00773 19ZHQ00890 19ZHQ00891 B. CONCURRENT REQUIREMENTS None.
C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this Requirements Bulletin B787-81205-SB320048-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB320048-00 RB mandatory.
Do the required actions based on the applicable condition(s) in Table 5, in accordance with Accomplishment Instructions.
B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM Page 5 of 9 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN
Table 5 Main Landing Gear - Drag Brace Lower Lock Link Assembly Replacement Repeat Interval (Not to Exceed) Boeing Recommended Compliance TimeActionCondition -Whichever occurs later,Do a check of maintenance records or an inspection of the drag brace lower lock link assembly on the right and left side MLG for affected serial numbers 19ZHQ00772, 19ZHQ00773, 19ZHQ00890, and 19ZHQ00891 All Airplanes
1. Within 48 months after the Issue 001 date of Requirements Bulletin B787-81205- SB320048-00 RB.
2. Within 48 months after the date of issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness -Whichever occurs later,Replace the affected drag brace lower lock link assembly on the MLG with a serviceable drag brace lower lock link assembly.*[1] CONDITION 1: ANY
DRAG BRACE
LOWER LOCK LINK
ASSEMBLY WITH
AFFECTED SERIAL NUMBER FOUND.
1. Within 48 months after the Issue 001 date of Requirements Bulletin B787-81205- SB320048-00 RB.
2. Within 48 months after the date of issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness --No further action required.
CONDITION 2: NO
DRAG BRACE
LOWER LOCK LINK
ASSEMBLY WITH
AFFECTED SERIAL NUMBER FOUND.
*[1] A serviceable drag brace lower lock link assembly is an assembly that does not have S/N: 19ZHQ00772, 19ZHQ00773, 19ZHQ00890 or 19ZHQ00891, conforms to approved type design, and is in a condition for safe operation.
D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM Page 6 of 9 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the Work Instructions is for reference only. The procedures in that column are not required by the AD and are for guidance only. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC; this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. If the length of any fastener specified in this service bulletin does not meet the installation standards in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards in SRM Chapter 51 may be used. In addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation in this service bulletin.
6. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
7. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.
B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM Page 7 of 9 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN
8. Use of colors in Tasks is based on guidance from the S1000D International specification for technical publications.
9. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.
10. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51 – Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable installation step.
2. WORK INSTRUCTIONS A. Actions Required for Compliance
(1) Requirements Table 1 Main Landing Gear - Drag Brace Lower Lock Link Assembly Replacement Refer to the listed procedures in SB B787-81205- SB320048-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1 - MAIN LANDING
GEAR RIGHT SIDE AND
LEFT SIDE DRAG BRACE
LOWER LOCK LINK AS-
SEMBLY SERIAL NUM-
BER INSPECTION -Do a check of maintenance records or an inspection of the drag brace lower lock link assembly on the right and left side MLG for affected serial numbers 19ZHQ00772, 19ZHQ00773, 19ZHQ00890, and 19ZHQ00891.
All Airplanes B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM Page 8 of 9 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN
Table 1 Main Landing Gear - Drag Brace Lower Lock Link Assembly Replacement Refer to the listed procedures in SB B787-81205- SB320048-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 2 - GET ACCESS
TO THE MAIN LANDING
GEAR DRAG BRACE
LOWER LOCK LINK AS- SEMBLY -Replace the affected drag brace lower lock link assembly on the MLG with a serviceable drag brace lower lock link assembly.*[1] CONDITION 1: ANY
DRAG BRACE LOWER
LOCK LINK ASSEMBLY
WITH AFFECTED SERIAL NUMBER FOUND.
PART 3 - MAIN LANDING
GEAR - RIGHT SIDE
DRAG BRACE LOWER
LOCK LINK ASSEMBLY -
REPLACEMENT - PART 4 - MAIN LANDING
GEAR - LEFT SIDE DRAG
BRACE LOWER LOCK
LINK ASSEMBLY - RE-
PLACEMENT - PART 5 - CLOSE AC-
CESS TO THE MAIN
LANDING GEAR DRAG
BRACE LOWER LOCK
LINK ASSEMBLY - --No further action required.CONDITION 2: NO DRAG
BRACE LOWER LOCK
LINK ASSEMBLY WITH
AFFECTED SERIAL NUMBER FOUND.
*[1] A serviceable drag brace lower lock link assembly is an assembly that does not have S/N: 19ZHQ00772, 19ZHQ00773, 19ZHQ00890 or 19ZHQ00891, conforms to approved type design, and is in a condition for safe operation.
B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM Page 9 of 9 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB320048-00 RB Issue 001, 20 Nov 2023 12:00:00 AM