On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 12
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2023-2227; AD 2024-16-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'd96d79e3699e428227bd2ae8f933d752b9ad521ed18ab33f2a6afb422581945b' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'd96d79e3699e428227bd2ae8f933d752b9ad521ed18ab33f2a6afb422581945b' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ALERT Alert Requirements Bulletin B787-81205-SB340053-00 RB NAVIGATION - Flight Management Function - Thrust Management Block Point 4.1 Software Change Copyright © 2022 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991 B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 1 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
7.0 B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
Table of Contents Page
A. EFFECTIVITY3
1. Airplanes3
2. Spares Affected5
B. CONCURRENT REQUIREMENTS6
C. COMPLIANCE6
D. APPROVAL8
E. ACCOMPLISHMENT INSTRUCTIONS10
1. General Information10
2. Work Instructions10
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 2 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-687, 689-886, 888- 897, 899-912, 914-954, 956-970, 972-982, 984-989, 992-996, 999, 1001-1008, 1012-1013, 1017- 1018, 1021-1022, 1024-1025, 1029-1030, 1032, 1038, 1044, 1047-1048, 1054, 1056-1059, 1094- 1095, 1098, 1130 in 3 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group information for the applicable airplanes is given below.
Table 1
DESCRIPTIONCONFIGURATIONGROUP 787-8 and 787-9 Airplanes not delivered with Flight Management System Block Point 4 software.
-1 787-10 Airplanes not delivered with Flight Management System Block Point 4 software.
-2 787-8, 787-9 and 787-10 Airplanes delivered with Flight Management System Block Point 4 software.
-3 Airplane Models: 787-10, 787-8, 787-9 Table 2 GroupVariable Number 1ZA006 1ZA100 - ZA105 1ZA116 - ZA124 1ZA135 - ZA144 1ZA152 - ZA156 1ZA175 - ZA189 GroupVariable Number 1ZA195 - ZA204 1ZA215 - ZA225 1ZA230 - ZA256 1ZA260 - ZA277 1ZA285 - ZA296 1ZA317 - ZA324 GroupVariable Number 1ZA327 1ZA334 - ZA335 1ZA341 - ZA342 1ZA380 - ZA389 1ZA430 - ZA439 1ZA445 - ZA489 B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 3 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
GroupVariable Number 1ZA506 - ZA516 1ZA536 - ZA545 1ZA560 - ZA567 1ZA576 - ZA580 1ZA586 1ZA588 - ZA593 1ZA610 - ZA617 1ZA650 - ZA652 1ZA655 - ZA663 1ZA665 - ZA677 1ZA680 - ZA685 1ZA695 - ZA698 1ZA715 - ZA716 1ZA718 - ZA719 1ZA740 - ZA741 1ZA768 - ZA769 1ZA778 - ZA779 1ZA783 - ZA784 1ZA817 - ZA831 1ZA839 1ZA841 - ZA842 1ZA846 - ZA848 1ZA853 - ZA862 1ZA873 - ZA874 3ZA875 - ZA876 1ZA881 - ZA888 1ZA916 - ZA920 1ZA949 - ZA950 1ZA954 - ZA955 3ZA956 - ZA957 1ZA958 GroupVariable Number 3ZA959 3ZA963 - ZA966 3ZA968 - ZA971 1ZA972 3ZA990 1ZB001 - ZB012 1ZB021 - ZB043 1ZB047 - ZB060 1ZB077 - ZB081 1ZB097 - ZB113 3ZB114 - ZB121 1ZB127 - ZB134 3ZB135 - ZB136 1ZB167 - ZB191 1ZB197 - ZB198 1ZB217 1ZB219 - ZB220 1ZB224 - ZB229 1ZB234 - ZB242 1ZB246 - ZB248 1ZB251 - ZB258 1ZB261 - ZB262 1ZB265 - ZB276 3ZB277 - ZB279 1ZB299 1ZB302 - ZB305 1ZB332 - ZB335 3ZB336 - ZB338 1ZB362 - ZB379 1ZB407 - ZB418 3ZB419 - ZB421 GroupVariable Number 1ZB422 - ZB430 3ZB431 - ZB435 1ZB446 - ZB465 3ZB466 - ZB467 1ZB536 - ZB543 1ZB545 - ZB547 1ZB558 - ZB584 3ZB585 - ZB586 1ZB603 - ZB618 1ZB646 - ZB649 1ZB656 - ZB664 3ZB665 1ZB676 - ZB681 1ZB688 - ZB707 1ZB733 - ZB735 1ZB738 - ZB740 1ZB742 - ZB743 3ZB744 - ZB745 3ZB749 - ZB750 1ZB753 - ZB756 3ZB757 1ZB763 - ZB768 1ZB771 - ZB772 3ZB773 - ZB774 1ZB775 1ZB778 - ZB802 3ZB803 - ZB805 3ZB807 - ZB808 3ZB810 - ZB811 1ZB812 - ZB820 3ZB821 B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 4 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
GroupVariable Number 1ZB828 - ZB836 3ZB837 - ZB841 1ZB858 - ZB862 3ZB863 1ZB874 - ZB876 3ZB890 1ZB893 - ZB897 3ZB898 - ZB902 1ZB908 3ZB909 1ZB910 - ZB914 3ZB915 - ZB918 3ZB922 1ZB924 3ZB926 - ZB927 1ZB934 - ZB936 3ZB937 - ZB943 3ZB967 - ZB971 3ZB977 - ZB978 1ZB980 - ZB981 3ZB982 - ZB986 3ZB990 - ZB991 1ZB993 3ZB994 - ZB996 1ZB997 2ZC001 - ZC008 GroupVariable Number 3ZC009 - ZC015 3ZC036 2ZC037 - ZC039 3ZC040 - ZC048 2ZC061 - ZC065 3ZC066 - ZC069 3ZC101 - ZC102 3ZC106 3ZC116 - ZC117 3ZC126 - ZC129 3ZC151 - ZC152 3ZC155 - ZC158 3ZC211 - ZC216 3ZC219 3ZC221 - ZC225 1ZD001 - ZD009 1ZD012 3ZD013 - ZD016 1ZE001 3ZE002 1ZE003 3ZE004 - ZE006 3ZE008 1ZE013 3ZE016 - ZE017 1ZE031 - ZE032 GroupVariable Number 3ZE040 - ZE045 3ZE085 - ZE086 3ZE090 - ZE091 3ZE095 - ZE096 3ZE100 3ZE105 - ZE106 3ZE110 3ZE115 3ZE150 3ZE165 - ZE166 3ZE170 - ZE171 3ZE195 - ZE198 3ZE220 - ZE234 3ZE270 3ZE310 - ZE311 3ZE340 - ZE341 3ZE350 - ZE362 3ZE375 3ZE380 - ZE381 3ZE415 - ZE416 3ZE425 - ZE426 3ZE436 - ZE437 3ZE455 - ZE456 3ZE481 3ZE486 --
2. Spares Affected None.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 5 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
B. CONCURRENT REQUIREMENTS Group 1-2:
The bulletin(s) listed below must be done before this bulletin.
Group 1:
Table 3 DescriptionService BulletinCompany NAVIGATION - Flight Management Function - Block Point 4 Software Change SB B787-81205-SB340035-00 RB Issue 001 Boeing Group 2:
Table 4 DescriptionService BulletinCompany NAVIGATION - Flight Management Function - Block Point 4 Software Change SB B787-81205-SB340037-00 RB Issue 001 Boeing Group 3:
None.
C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB340053-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB340053-00 RB mandatory.
Accomplish the required actions, based on the applicable conditions in Table 8 and Table 9 in accordance with Accomplishment Instructions.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 6 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
Group 1-2:
Table 8 Thrust Management Block Point 4.1 Software Installation Repeat Interval (Not to Exceed) Boeing Recommeded Compliace Time ActionCondition -At the time specified in Compliance of the CON-
CURRENT REQUIRE- MENT bulletin, or before accomplishing the action in ACTION 2, whichever occurs first.
ACTION 1: Do all applicable ACCOMPLISHMENT INSTRUCTIONS actions identified in the bulletin specified in CONCUR- RENT REQUIREMENTS.
All Airplanes Within 6 months after the Issue 001 date of Requirements Bulletin B787- 81205-SB340053-00 RB or within 6 months after the date of Issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness, whichever occurs later.
ACTION 2: Install 34 Thrust Management (TM) Operational Program Software (OPS) Part Number HNP55-AL12-5008 or later approved software Part Number to data load destination Common Computing Resource (CCR) General Processing Module (GPM) GPM-L5 and GPM- R5.
ACTION 3: Do the software configuration check and make sure that software 34 TM OPS part number HNP55-AL12- 5008 or later approved software part number is shown as installed in CCR GPM-L5 and GPM-R5. If software 34 TM OPS part number HNP55-AL12- 5008 or later approved software part number is not shown as installed in CCR GPM-L5 and GPM- R5, do corrective action(s) until the software part number is shown as installed in CCR GPM-L5 and GPM-R5.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 7 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
Group 3:
Table 9 Thrust Management Block Point 4.1 Software Installation Repeat Interval (Not to Exceed) Boeing Recommeded Compliace Time ActionCondition -Within 6 months after the Issue 001 date of Requirements Bulletin B787- 81205-SB340053-00 RB or within 6 months after the date of Issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness, whichever occurs later.
ACTION 1: Install 34 Thrust Management (TM) Operational Program Software (OPS) Part Number HNP55-AL12-5008 or later approved software Part Number to data load destination Common Computing Resource (CCR) General Processing Module (GPM) GPM-L5 and GPM- R5.
All Airplanes ACTION 2: Do the software configuration check and make sure that software 34 TM OPS part number HNP55-AL12- 5008 or later approved software part number is shown as installed in CCR GPM-L5 and GPM-R5. If software 34 TM OPS part number HNP55-AL12- 5008 or later approved software part number is not shown as installed in CCR GPM-L5 and GPM- R5, do corrective action(s) until the software part number is shown as installed in CCR GPM-L5 and GPM-R5.
D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 8 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 9 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. Later approved software is only software that is approved by Boeing as a replacement for the software specified in this bulletin and approved as part of the type design by the Federal Aviation Administration (FAA) after issuance of this bulletin Original Issue date.
2. WORK INSTRUCTIONS A. Actions Required for Compliance Requirements(1) B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 10 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
Group 1-2:
Table 1 Thrust Management Block Point 4.1 Software Installation Refer to the listed procedures in SB B787-81205- SB340053-00 Issue 001 or later approved issues as an accepted procedure Method of Compliance ActionCondition --ACTION 1: Do all applicable ACCOM- PLISHMENT INSTRUCTIONS actions identified in the bulletin specified in CONCURRENT REQUIREMENTS.
All Airplanes PART 1: PREPARE AIR-
PLANE AND STAGE SOFT-
WARE TO MASS STORAGE
DEVICES -ACTION 2: Install 34 Thrust Management (TM) Operational Program Software (OPS) Part Number HNP55- AL12-5008 or later approved software Part Number to data load destination Common Computing Resource (CCR) General Processing Module (GPM) GPM-L5 and GPM-R5.
PART 2: INSTALL NEW
SOFTWARE PART 2: INSTALL NEW
SOFTWARE -ACTION 3: Do the software configuration check and make sure that software 34 TM OPS part number HNP55- AL12-5008 or later approved software part number is shown as installed in CCR GPM-L5 and GPM-R5. If software 34 TM OPS part number HNP55- AL12-5008 or later approved software part number is not shown as installed in CCR GPM-L5 and GPM-R5, do corrective action(s) until the software part number is shown as installed in CCR GPM-L5 and GPM-R5.
PART 3: PERFORM SYSTEM TESTS B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 11 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM
REQUIREMENTS BULLETIN
Group 3:
Table 2 Thrust Management Block Point 4.1 Software Installation Refer to the listed procedures in SB B787-81205- SB340053-00 Issue 001 or later approved issues as an accepted procedure Method of Compliance ActionCondition PART 1: PREPARE AIR-
PLANE AND STAGE SOFT-
WARE TO MASS STORAGE
DEVICES -ACTION 1: Install 34 Thrust Management (TM) Operational Program Software (OPS) Part Number HNP55- AL12-5008 or later approved software Part Number to data load destination Common Computing Resource (CCR) General Processing Module (GPM) GPM-L5 and GPM-R5.
All Airplanes PART 2: INSTALL NEW
SOFTWARE PART 2: INSTALL NEW
SOFTWARE -ACTION 2: Do the software configuration check and make sure that software 34 TM OPS part number HNP55- AL12-5008 or later approved software part number is shown as installed in CCR GPM-L5 and GPM-R5. If software 34 TM OPS part number HNP55- AL12-5008 or later approved software part number is not shown as installed in CCR GPM-L5 and GPM-R5, do corrective action(s) until the software part number is shown as installed in CCR GPM-L5 and GPM-R5.
PART 3: PERFORM SYSTEM TESTS B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM Page 12 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB340053-00 RB Issue 001, 16 Nov 2022 12:00:00 AM