On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 29Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0338; AD 2021-23-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '599b3ea6666c572283ce8b70331dab68c16c1d690c0fed4263af7b192fcd1303' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '599b3ea6666c572283ce8b70331dab68c16c1d690c0fed4263af7b192fcd1303' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Alert Requirements Bulletin B787-81205-SB530078-00 RB FUSELAGE - Body Station (STA) 1209 Aft Wheel Well Bulkhead - Body Chord Inspection Copyright © 2020 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
ECCN: 9E991 B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 1 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
3.0 B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
Table of Contents Page
A. EFFECTIVITY3
1. Airplanes3
2. Spares Affected4
B. CONCURRENT REQ UIREMENTS4
C. COMPLIANCE4
D. APPROVAL8
E. ACCOMPLISHMENT INSTRUCTIONS9
1. General Inf ormation9
2. Work Instr uctions10
TASK 1 – STA 1209 AFT WHEEL WELL BULKHEAD BODY CHORD HFEC INSPECTION [Group 1] . . 16 TASK 2 – STA 1209 AFT WHEEL WELL BULKHEAD BODY CHORD HFEC INSPECTION [Group 2] . . 21 TASK 3 – STA 1209 AFT WHEEL WELL BULKHEAD BODY CHORD HFEC INSPECTION [Group 2] . . 26 B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 2 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This bulletin is applicable to 787-8, 787-9 Airplane(s), line number(s) 115-527, 529-547, 549-564, 566-598, 601, 603, 605, 607, 610, 612, 614, 619 in 2 Group(s).Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive",
e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
Table 1
DESCRIPTIONCONFIGURATIONGROUP 787-8 airplanes with potential shimming requirements not met at the STA 1209 aft wheel well bulkhead body chord.
-1 787-9 airplanes with potential shimming requirements not met at the STA 1209 aft wheel well bulkhead body chord.
-2 Airplane Models: 787-8, 787-9 Table 2 GroupVariable Number 1ZA122 - ZA124 1ZA136 - ZA144 1ZA152 - ZA156 1ZA187 - ZA189 1ZA195 - ZA204 1ZA215 - ZA225 1ZA244 - ZA255 1ZA265 - ZA269 1ZA275 - ZA277 1ZA291 - ZA296 GroupVariable Number 1ZA321 - ZA324 1ZA327 1ZA334 - ZA335 1ZA341 - ZA342 1ZA387 - ZA389 1ZA435 - ZA439 1ZA445 - ZA448 1ZA453 - ZA457 1ZA468 - ZA489 1ZA515 - ZA516 GroupVariable Number 1ZA540 - ZA545 1ZA560 - ZA567 1ZA578 - ZA580 1ZA586 1ZA588 - ZA593 1ZA610 - ZA617 1ZA650 - ZA652 1ZA655 - ZA663 1ZA665 - ZA675 1ZA680 - ZA685 B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 3 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
GroupVariable Number 1ZA695 - ZA697 1ZA715 - ZA716 1ZA718 - ZA719 1ZA740 - ZA741 1ZA768 - ZA769 1ZA778 - ZA779 1ZA783 - ZA784 1ZA817 - ZA831 1ZA839 1ZA842 1ZA846 - ZA848 1ZA853 - ZA860 1ZA873 - ZA874 1ZA881 - ZA888 1ZA916 - ZA920 2ZB001 - ZB010 2ZB021 - ZB040 2ZB047 - ZB057 GroupVariable Number 2ZB077 - ZB081 2ZB097 - ZB107 2ZB127 - ZB132 2ZB167 - ZB187 2ZB197 - ZB198 2ZB217 2ZB224 - ZB229 2ZB234 - ZB242 2ZB246 2ZB251 - ZB253 2ZB261 2ZB299 2ZB302 2ZB332 2ZB362 - ZB377 2ZB407 - ZB418 2ZB422 - ZB424 2ZB446 - ZB457 GroupVariable Number 2ZB536 - ZB543 2ZB545 - ZB547 2ZB558 - ZB578 2ZB603 - ZB618 2ZB646 - ZB649 2ZB656 - ZB659 2ZB676 - ZB679 2ZB688 - ZB699 2ZB703 - ZB705 2ZB733 2ZB738 - ZB739 2ZB763 - ZB766 2ZB778 - ZB779 2ZB782 - ZB791 2ZB812 - ZB815 2ZB828 2ZB831 --
2. Spares Affected None.
B. CONCURRENT REQUIREMENTS None.
C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB530078-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB530078-00 RB mandatory.
Accomplish the required actions, based on the applicable conditions in Table 5 and 6, in accordance with Accomplishment Instructions.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 4 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
Group 1:
Table 5 Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) Inspection Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 1,500 Flight Cycles OR within 365 days after the Issue 001 date of the Requirements Bulletin B787-81205- SB530078-00 RB, whichever occurs first.
Before 7,900 Total Flight cycles OR Before 101,250 Total Flight hours, whichever occurs first.
Do a HFEC inspection of the forward edge of the horizontal flange of the Aft Wheel Well Bulkhead (AWWB) body chord between left Water Line (WL) 146 and right WL 146 for any crack.
All Airplanes.
-Before further flight.ACTION 1:CONDITION 1: ANY CRACK FOUND. Contact The Boeing Company for repair instructions and do the repair.
12,000 flight cycles.-ACTION 2:
Repeat the HFEC inspection of the forward edge of the horizontal flange of the AWWB body chord between left WL 146 and right WL 146 for any crack. *[1] 12,000 flight cycles.-Repeat the HFEC inspection of the forward edge of the horizontal flange of the AWWB body chord between left WL 146 and right WL 146 for any crack. *[1] CONDITION 2: NO CRACK FOUND.
*[1] It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530078-00 RB in areas where a repair covers the affected inspection area and meets the following conditions:
1.The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530078-00 RB and installed after the Issue 001 date of the Requirements Bulletin B787-81205-SB530078-00 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains a repeat inspection program for the subject area.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 5 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
Group 2:
Table 6 Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) Inspection Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 1,500 Flight Cycles OR within 365 days after the Issue 001 date of the Requirements Bulletin B787-81205- SB530078-00 RB, whichever occurs first.
Before 7,500 Total Flight cycles OR Before 101,250 Total Flight hours, whichever occurs first.
Action 1:
Do a HFEC inspection of the forward edge of the horizontal flange of the Aft Wheel Well Bulkhead (AWWB) body chord between Water Line (WL) 132 and WL 152, left and right side, and between left Buttock Line (BL) 41 and right BL 41, for any crack.
All Airplanes Action 2:
Do a HFEC inspection around all the fastener heads and vertical beam clips common to the AWWB body chord horizontal flange from two fasteners above stringer S-31 to two fasteners below stringer S- 35, left and right side, for any crack.
-Before further flight.Action 1:CONDITION 3: ANY
CRACK FOUND
DURING INSPEC-
TION OF THE
AWWB BODY
CHORD FORWARD EDGES.
Contact The Boeing Company for repair instructions and do the repair.
12,000 flight cycles.
-Action 2:
Repeat the HFEC inspection of the forward edge of the horizontal flange of the AWWB body chord between WL 132 and WL 152, left and right side, and between left BL 41 and right BL 41, for any crack. *[1] B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 6 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
Group 2:
Table 6 Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) Inspection Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition 12,000 flight cycles.
-Repeat the HFEC inspection of the forward edge of the horizontal flange of the AWWB body chord between WL 132 and WL 152, left and right side, and between left BL 41 and right BL 41, for any crack. *[1] CONDITION 4: NO
CRACK FOUND
DURING INSPEC-
TION OF THE
AWWB BODY
CHORD FORWARD EDGES.
-Before further flight.Action 1:CONDITION 5: ANY
CRACK FOUND
DURING INSPEC-
TION OF THE
AWWB BODY
CHORD HORIZON- TAL FLANGE.
Contact The Boeing Company for repair instructions and do the repair.
12,000 flight cycles.
-Action 2:
Repeat the HFEC inspection around all the fastener heads and vertical beam clips common to the AWWB body chord horizontal flange from two fasteners above stringer S-31 to two fasteners below stringer S- 35, left and right side, for any crack. *[1] 12,000 flight cycles.
-Repeat the HFEC inspection around all the fastener heads and vertical beam clips common to the AWWB body chord horizontal flange from two fasteners above stringer S-31 to two fasteners below stringer S- 35, left and right side, for any crack. *[1] CONDITION 6: NO
CRACK FOUND
DURING INSPEC-
TION OF THE
AWWB BODY
CHORD HORIZON- TAL FLANGE.
*[1] It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530078-00 RB in areas where a repair covers the affected inspection area and meets the following conditions:
1.The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530078-00 RB and installed after the Issue 001 date of the Requirements Bulletin B787-81205-SB530078-00 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains a repeat inspection program for the subject area.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 7 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
Group 1-2:
D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulation and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authority (JAA) approved for all EASA/JAA approved airplanes listed in the Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this FAA Requirement Document.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 8 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document.There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in the Work Instructions are in the Compliance section.
5. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers.When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.
6. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
7. The instructions in the Work Instructions can include operation of tools or test equipment.
Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing Index contain data on versions of the tools or test equipment that you can use. It is permitted to use replaced tools. It is not permitted to use superseded tools.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 9 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
8. Boeing Service Letter 787-SL-51-001, Damage Reporting and Repair Plan/Design Guidelines, is an acceptable procedure to request information from Boeing for additional structural repair instructions. The Service Letter describes what information must be provided to Boeing before a structural repair can be provided.
2. WORK INSTRUCTIONS A. Actions Required for Compliance
(1) Requirements Group 1:
Table 1 Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) Inspection Refer to the listed procedures in SB B787-81205- SB530078-00 Issue 001 or later approved issues as an accepted procedure:
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes.
-Task 1Do a HFEC inspection of the forward edge of the horizontal flange of the Aft Wheel Well Bulkhead (AWWB) body chord between left Water Line (WL) 146 and right WL 146 for any crack.
PART 2: CLOSE ACCESS-ACTION 1:CONDITION 1: ANY CRACK FOUND. Contact The Boeing Company for repair instructions and do the repair.
PART 1: OPEN ACCESS-ACTION 2:
Repeat the HFEC inspection of the forward edge of the horizontal flange of the AWWB body chord between left WL 146 and right WL 146 for any crack.
*[1] -Task 1 PART 2: CLOSE ACCESS- B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 10 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
Group 1:
Table 1 Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) Inspection Refer to the listed procedures in SB B787-81205- SB530078-00 Issue 001 or later approved issues as an accepted procedure:
Method of ComplianceActionCondition PART 1: OPEN ACCESS-Repeat the HFEC inspection of the forward edge of the horizontal flange of the AWWB body chord between left WL 146 and right WL 146 for any crack.
*[1] CONDITION 2: NO CRACK FOUND. -Task 1 PART 2: CLOSE ACCESS- *[1] It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530078-00 RB in areas where a repair covers the affected inspection area and meets the following conditions:
1.The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530078-00 RB and installed after the Issue 001 date of the Requirements Bulletin B787-81205-SB530078-00 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains a repeat inspection program for the subject area.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 11 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
Group 2:
Table 2 Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) Inspection Refer to the listed procedures in SB B787-81205- SB530078-00 Issue 001 or later approved issues as an accepted procedure:
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes.
-Task 2ACTION 1:
Do a HFEC inspection of the forward edge of the horizontal flange of the Aft Wheel Well Bulkhead (AWWB) body chord between Water Line (WL) 132 and WL 152, left and right side, and between left Buttock Line (BL) 41 and right BL 41, for any crack.
PART 3: OPEN ACCESS-- -Task 3ACTION 2:
Do a HFEC inspection around all the fastener heads and vertical beam clips common to the AWWB body chord horizontal flange from two fasteners above stringer S-31 to two fasteners below stringer S-35, left and right side, for any crack.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM Page 12 of 29 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB530078-00 RB Issue 001, 08 Sep 2020 9:08:12 AM