On this page

Copies · 3

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

Revision 002, part 2 of 278753A0084 RequirementBulletin Issue002--part2_ · 160 pages · 3.9 MB

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1301; AD 2025-06-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-1301 (document 0014) · AD 2025-06-13

Revision 001B787-81205-SB530084-00_RB_Issue001 · 393 pages · 6.3 MB

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1301; AD 2025-06-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-1301 (document 0002) · AD 2025-06-13

78753A0084 RequirementBulletin Issue002--Part1_, part 1 of 178753A0084 RequirementBulletin Issue002--Part1_ · 237 pages · 3.1 MB

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1301; AD 2025-06-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-1301 (document 0014) · AD 2025-06-13

Manufacturer
Boeing
Type
Alert Requirements Bulletin
Number
B787-81205-SB530084-00 RB
Latest revision known
B787-81205-SB530084-00 RB, Issue 002, dated September 5, 2024

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 160Partly OCR

Revision 002, part 2 of 2, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1301; AD 2025-06-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '48f8fc59e0756125f1bd2487b93eaabefefb028b96a1ff83d84992ec050814a5'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

A BOEING B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN 1 11 LOCATIONS A-A 11 LOCATIONS NBD

VIEW LOOKING AFT B-B ICN-B787-A-000061-A-81205-19287-A-01-1 Figure 2 B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 238 of 397 Export Controlled ECCN: 9E991 See page 1 for details

ICN-B787-A-000061-A-81205-19288-A-01-1 Figure 3

1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY numbers shown below are the number of parts necessary for this Task.

Table 1 More DataQtyIdentificationNameActionStep *[1]*[2]*[3]11-HOLEDrill 1 1461Z3408-203FLOOR BEAM FIT- TING Install (New)2 B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 239 of 397 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Table 1 More DataQtyIdentificationNameActionStep Refer to the fastener code table.

11-BOLTInstall (New)3 Refer to the fastener code table.

11-COLLARInstall (New) *[4]1-GAPMeasure4 *[5]-403Z1568-( )SPACERInstall (New)5 *[6]*[7]2BACB30MR8A14BOLTInstall (New)6 2403Z1563-1RETAINER WASHERInstall (New) 4403Z1580-1CROWFOOT LOCK WASHER Install (New) 4403Z1501-5BUSHINGInstall (New) 2403Z1563-2RETAINER WASHERInstall (New) *[8]-BACW10BP( )PKWASHERInstall (Kept) *[6]2BACN11Z8CKNUTInstall (New) *[1] Align new SOB fitting pilot holes with the removed SOB fitting and match drill frame holes to new SOB fitting. Refer to SOPM 20-10- 07 as an accepted procedure.

*[2] Chamfer edges of fastener holes common to the SOB fitting. Refer to SOPM 20-10-07 as an accepted procedure.

*[3] Refer to fastener code tables for the match-drill hole diameter.

*[4] Measure the gap between the SOB fitting and the floor beam assembly. Make sure the gap is less than or equal to 0.008 inch. If the gap is greater than 0.008 inch, install spacer(s).

*[5] A maximum of 3 spacers may be installed if there is a gap greater than 0.008 inch. After spacer installation, the maximum acceptable gap prior to bolt installation is 0.008 inch. Make sure that the total spacer thickness does not exceed 0.12 inch.

*[6] Refer to SOPM 20-50-01 as an accepted procedure.

*[7] Fastener installation direction is optional.

*[8] If kept part cannot be installed, install a new part. Refer to 787-9 SRM 51-41-07 Rev 28 or 787-10 SRM 51-41-07 Rev 14 or later approved revision published on MyBoeingFleet as an accepted procedure.

B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 240 of 397 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN

ICN-B787-A-000061-A-81205-09082-A-01-1 Figure 4

2.

The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the Task.

A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the number of fasteners necessary for this Task.

Table 2 More DataHole DiaQtyIdentificationNameCode *[1]0.250 - 0.253-BACB30NX()K()BOLTTCE *[1]0.250 - 0.253-BACC30AB()ACOLLAR First oversize.0.266 - 0.269-BACB30NX()K()XBOLT First oversize.0.266 - 0.269-BACC30AB()AYCOLLAR *[1] Refer to SOPM 20-50-18 as an accepted procedure.

B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 241 of 397 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Task 24 – STA 1425 RIGHT SIDE SOB FITTING REMOVAL AND INSPECTION [Group 1: ]

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:

THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE

BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 242 of 397 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Page 6OCROpen in PDF

@ BOEING B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN Procedure This Task applies only to: Group 1.

STA 1593 STA 1233 STA 1425 ¿ B

TYPICAL 3045002 ICN-B787-A-000061-A-81205-19289-A-01-1 Figure 1 B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 243 of 397 Export Controlled ECCN: 9E991 See page 1 for details

Page 7OCROpen in PDF

A BOEING B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN

2) 4 LOCATIONS INBD

•

• 10 LOCATIONS INBD

VIEW LOOKING AFT A-A 14 LOCATIONS

VIEW LOOKING AFT B-B ICN-B787-A-000061-A-81205-19290-A-01-1 Figure 2

1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY numbers shown below are the number of parts necessary for this Task.

B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 244 of 397 Export Controlled ECCN: 9E991 See page 1 for details

Table 1 More DataQtyIdentificationNameActionStep 10-BOLTRemove1 10-COLLARRemove 4-BOLTRemove2 4-WASHERRemove 4-COLLARRemove 2BACB30MR8A14BOLTRemove3 4403Z1563-( )RETAINER WASHERRemove 4403Z1580-1CROWFOOT LOCK WASHER Remove 4403Z1501-5BUSHINGRemove *[1]-BACW10BP( )PKWASHERRemove / Keep 2BACN11Z8CKNUTRemove 1461Z3409-204FLOOR BEAM FIT- TING Remove4 *[2]14-FASTENER HOLESInspect5 *[2]1-FRAMEInspect *[1] If installed to adjust grip length.

*[2] Do a detailed inspection of the fuselage frame and fastener holes for any damage. Damage is defined in 787-9 SRM 51-13-01 Rev 28 / 787-10 SRM 51-13-01 Rev 14 or later approved revisions published on MyBoeingFleet.

B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 245 of 397 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Task 25 – STA 1425 RIGHT SIDE SOB FITTING INSTALLATION [Group 1:

]

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:

THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE

BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 246 of 397 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN

Page 10OCROpen in PDF

@ BOEING B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN Procedure This Task applies only to: Group 1.

STA 1593 STA 1233 STA 1425 ¿ B

TYPICAL 3045004 ICN-B787-A-000061-A-81205-19291-A-01-1 Figure 1 B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 247 of 397 Export Controlled ECCN: 9E991 See page 1 for details

Page 11OCROpen in PDF

@ BOEING B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN 1 14 LOCATIONS

A-A INBD TOS 8F 4- 4 LOCATIONS TCE 8F 10 LOCATIONS VIEW LOOKING AFT 3045005 B-B ICN-B787-A-000061-A-81205-19292-A-01-1 Figure 2 B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 248 of 397 Export Controlled ECCN: 9E991 See page 1 for details

ICN-B787-A-000061-A-81205-19293-A-01-1 Figure 3

1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY numbers shown below are the number of parts necessary for this Task.

Table 1 More DataQtyIdentificationNameActionStep *[1]*[2]*[3]14-HOLEDrill 1 1461Z3409-204FLOOR BEAM FIT- TING Install (New)2 B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM Page 249 of 397 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530084-00 RB Issue 002, 05 Sep 2024 12:00:00 AM

REQUIREMENTS BULLETIN