On this page
Copies · 3
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0005; AD 2025-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0005; AD 2025-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0005; AD 2025-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Boeing
- Type
- Alert Requirements Bulletin
- Number
- B787-81205-SB530086-00 RB
- Latest revision known
- B787-81205-SB530086-00 RB, Issue 001, dated October 18, 2024
- Copies
- 3 files of 1 revision
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 57Partly OCR
Revision 001, part 1 of 3, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0005; AD 2025-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c0f6ae638c9a5f670e258ae6bae02778a10d7b795a400429bda46a578923792e' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c0f6ae638c9a5f670e258ae6bae02778a10d7b795a400429bda46a578923792e' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ALERT Alert Requirements Bulletin B787-81205-SB530086-00 RB FUSELAGE - Section 46 - Seat Track Splice Fittings Inspection and Replacement Copyright © 2024 The Boeing Company Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991 B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 1 of 119 Export Controlled ECCN: 9E991 See page 1 for details
4.0 B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Table of Contents Page
A. EFFECTIVITY3
1. Airplanes3
2. Spares Affected4
B. CONCURRENT REQUIREMENTS4
C. COMPLIANCE5
D. APPROVAL5
E. ACCOMPLISHMENT INSTRUCTIONS6
1. General Information6
2. Work Instructions7
TASK 1 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 1-2]14
TASK 2 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 3]20
TASK 3 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 4]25
TASK 4 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 5]30
TASK 5 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 6]35
TASK 6 – STA 1437 BL 102.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1]40
TASK 7 – STA 1437 BL 39.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1]47
TASK 8 – STA 1437 BL 66, 19 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1]53
TASK 9 – STA 1437 BL 11 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1]58
TASK 10 – STA 1605 BL 102.5, 39.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1-3, 5] . 64 TASK 11 – STA 1605 BL 66, 19, 11 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1-4] . . . 69
TASK 12 – STA 1437 BL 102.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 2]74
TASK 13 – STA 1437 BL 39.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 2]81
TASK 14 – STA 1437 BL 66, 19 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 2]86
TASK 15 – STA 1437 BL 11 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 2]91
TASK 16 – STA 1401+36 BL 102.5, 39.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 3, 5] . 96 TASK 17 – STA 1401+36 BL 66, 19, 11 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 3-4] . 101 TASK 18 – STA 1401+36 BL 102.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 4, 6] . . . 106
TASK 19 – STA 1605 BL 102.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 4, 6]111
Appendix A – PROCEDURE FOR X-RAY FLUORESCENCE SPECTROMETER INSPECTION [Group 1-6]
.115
B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 2 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 408-687 in 6 Group(s).
Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group information for the applicable airplanes is given below. Refer to CN-AA94711A for data about this change.
Table 1
DESCRIPTIONCONFIGURATIONGROUP 787-8 Airplanes installed with section 46 seat track splice fittings that are possibly commercially pure unalloyed titanium that have a buss bar installed.
-1 787-8 Airplanes installed with section 46 seat track splice fittings that are possibly commercially pure unalloyed titanium that do not have a buss bar installed.
-2 787-9 Airplanes installed with section 46 seat track splice fittings that are possibly commercially pure unalloyed titanium at 20 locations.
-3 787-9 Airplanes installed with section 46 seat track splice fittings that are possibly commercially pure unalloyed titanium at 16 locations.
-4 787-10 Airplanes installed with section 46 seat track splice fittings that are possibly commercially pure unalloyed titanium at 8 locations.
-5 787-10 Airplanes installed with section 46 seat track splice fittings that are possibly commercially pure unalloyed titanium at 4 locations.
-6 Airplane Models: 787-10, 787-8, 787-9 Table 2 B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 3 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
GroupVariable Number 1ZA144 1ZA154 - ZA156 1ZA203 - ZA204 1ZA251 - ZA252 2ZA253 - ZA256 2ZA276 - ZA277 2ZA449 2ZA458 1ZA487 - ZA489 1ZA672 - ZA675 2ZA676 1ZA696 - ZA697 2ZA698 1ZA857 - ZA858 2ZA859 - ZA862 1ZA873 - ZA874 1ZA882 - ZA886 2ZA887 - ZA888 1ZA916 - ZA918 2ZA919 - ZA920 4ZB007 - ZB011 4ZB024 - ZB025 3ZB026 4ZB038 - ZB043 GroupVariable Number 4ZB047 - ZB060 4ZB097 - ZB110 4ZB183 - ZB191 3ZB217 3ZB219 - ZB220 4ZB229 4ZB237 - ZB242 3ZB246 - ZB248 4ZB251 - ZB256 3ZB261 - ZB262 4ZB265 - ZB266 4ZB269 - ZB272 4ZB302 - ZB304 3ZB332 - ZB334 4ZB371 - ZB378 4ZB414 - ZB416 3ZB417 4ZB418 3ZB422 - ZB426 3ZB446 - ZB460 4ZB540 - ZB543 4ZB547 4ZB566 - ZB582 4ZB606 - ZB610 GroupVariable Number 4ZB616 - ZB618 4ZB647 - ZB649 4ZB656 - ZB660 3ZB676 - ZB681 4ZB688 - ZB690 3ZB691 - ZB701 4ZB703 - ZB707 4ZB733 - ZB735 4ZB738 - ZB739 4ZB742 - ZB743 4ZB753 4ZB755 4ZB763 - ZB764 3ZB765 4ZB766 - ZB768 4ZB778 - ZB780 4ZB782 - ZB794 4ZB812 - ZB818 4ZB828 - ZB833 4ZB874 4ZB910 6ZC001 - ZC006 5ZC036 --
2. Spares Affected None.
B. CONCURRENT REQUIREMENTS None.
B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 4 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this Requirements Bulletin. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB530086-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.
Accomplish the required action, based on the applicable condition in Table 6 in accordance with the Accomplishment Instructions.
Table 6 Seat Track Splice Fittings at Station (STA) 1437/1401+36 and 1605 – Inspection:
Boeing Recommended Compliance Time ActionCondition Within 30 months after the Issue 001 date of Requirements Bulletin B787- 81205-SB530086 RB.
Do a handheld X-Ray Fluorescence Spectrometer Inspection or a High Frequency Eddy Current inspection of Seat Track Splice Fittings to determine material.
All Airplanes -No further action required at that Seat Track Splice Fitting location.
CONDITION 1: ANY SEAT TRACK SPLICE FITTING WITH Ti-6Al-4V ALLOY MATERIAL FOUND.
Before further flight.Replace affected fitting with a new Seat Track Splice Fitting (Ti-6Al-4V alloy material).
CONDITION 2: ANY SEAT TRACK
SPLICE FITTING FOUND THAT IS NOT Ti-6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY CANNOT BE
DETERMINED D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 5 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the Work Instructions is for reference only. The procedures in that column are not required by the AD and are for guidance only. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC; this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51 – Torque Values:
B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 6 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable installation step.
6. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.
7. If the length of any fastener specified in this requirements bulletin does not meet the installation standards in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards in SRM Chapter 51 may be used. In addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation in this requirements bulletin.
8. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
9. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.
11. The CONDITIONS, ACTIONS and OPTIONS shown apply to each seat track splice fitting independently.
12. It is recommended that any seat track splice fitting replacement be done one at a time for each station to minimize mismatch for seat tracks on either side of the seat tracks splice fitting.
2. WORK INSTRUCTIONS A. Actions Required for Compliance B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 7 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
(1) Requirements:
Group 1:
Table 1 Seat Track Splice Fittings at Station (STA) 1437 and 1605 - Inspection:
Refer to the listed procedures in SB B787-81205- SB530086-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS-Do a handheld X-Ray Fluorescence Spectrometer inspection or a High Frequency Eddy Current inspection of Seat Track Splice Fittings to determine material.
All Airplanes -TASK 1 PART 2: CLOSE ACCESS-No further action required at that Seat Track Splice Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING WITH Ti-6Al-4V ALLOY MATERIAL FOUND.
-TASK 6Replace affected fittings with new Seat Track Splice Fittings at affected locations.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING FOUND THAT IS NOT Ti- 6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER- MINED -TASK 7 -TASK 8 -TASK 9 -TASK 10 -TASK 11 PART 2: CLOSE ACCESS- Group 2:
Table 2 Seat Track Splice Fittings at Station (STA) 1437 and 1605 - Inspection:
Refer to the listed procedures in SB B787-81205- SB530086-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS-Do a handheld X-Ray Fluorescence Spectrometer inspection or a High Frequency Eddy Current inspection of Seat Track Splice Fittings to determine material.
All Airplanes -TASK 1 B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 8 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Group 2:
Table 2 Seat Track Splice Fittings at Station (STA) 1437 and 1605 - Inspection:
Refer to the listed procedures in SB B787-81205- SB530086-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 2: CLOSE ACCESS-No further action required at that Seat Track Splice Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING WITH Ti-6Al-4V ALLOY MATERIAL FOUND.
-TASK 12Replace affected fittings with new Seat Track Splice Fittings at affected locations.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING FOUND THAT IS NOT Ti- 6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER- MINED -TASK 13 -TASK 14 -TASK 15 -TASK 10 -TASK 11 PART 2: CLOSE ACCESS- Group 3:
Table 3 Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed procedures in SB B787-81205- SB530086-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS-Do a handheld X-Ray Fluorescence Spectrometer inspection or a High Frequency Eddy Current inspection of Seat Track Splice Fittings to determine material.
All Airplanes -TASK 2 PART 2: CLOSE ACCESS-No further action required at that Seat Track Splice Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING WITH Ti-6Al-4V ALLOY MATERIAL FOUND.
B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 9 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Group 3:
Table 3 Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed procedures in SB B787-81205- SB530086-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition -TASK 16Replace affected fittings with new Seat Track Splice Fittings at affected locations.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING FOUND THAT IS NOT Ti- 6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER- MINED -TASK 17 -TASK 10 -TASK 11 PART 2: CLOSE ACCESS- Group 4:
Table 4 Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed procedures in SB B787-81205- SB530086-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS-Do a handheld X-Ray Fluorescence Spectrometer inspection or a High Frequency Eddy Current inspection of Seat Track Splice Fittings to determine material.
All Airplanes -TASK 3 PART 2: CLOSE ACCESS-No further action required at that Seat Track Splice Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING WITH Ti-6Al-4V ALLOY MATERIAL FOUND.
-TASK 18Replace affected fittings with new Seat Track Splice Fittings at affected locations.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING FOUND THAT IS NOT Ti- 6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER- MINED -TASK 17 -TASK 11 -TASK 19 PART 2: CLOSE ACCESS- B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 10 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Group 5:
Table 5 Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed procedures in SB B787-81205- SB530086-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS-Do a handheld X-Ray Fluorescence Spectrometer inspection or a High Frequency Eddy Current inspection of Seat Track Splice Fittings to determine material.
All Airplanes -TASK 4 PART 2: CLOSE ACCESS-No further action required at that Seat Track Splice Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING WITH Ti-6Al-4V ALLOY MATERIAL FOUND.
-TASK 16Replace affected fittings with new Seat Track Splice Fittings at affected locations.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING FOUND THAT IS NOT Ti- 6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER- MINED -TASK 10 PART 2: CLOSE ACCESS- Group 6:
Table 6 Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed procedures in SB B787-81205- SB530086-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS-Do a handheld X-Ray Fluorescence Spectrometer inspection or a High Frequency Eddy Current inspection of Seat Track Splice Fittings to determine material.
All Airplanes -TASK 5 PART 2: CLOSE ACCESS-No further action required at that Seat Track Splice Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING WITH Ti-6Al-4V ALLOY MATERIAL FOUND.
B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 11 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Group 6:
Table 6 Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed procedures in SB B787-81205- SB530086-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition -TASK 18Replace affected fittings with new Seat Track Splice Fittings at affected locations.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING FOUND THAT IS NOT Ti- 6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER- MINED -TASK 19 PART 2: CLOSE ACCESS- B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM Page 12 of 119 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB530086-00 RB Issue 001, 18 Oct 2024 12:00:00 AM