Revision 001RB B787-81205-SB550011-00 - Issue 001 · 80 pages · 2.7 MB

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0844; AD 2022-09-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0844 (document 0008) · AD 2022-09-08

Manufacturer
Boeing
Type
Alert Requirements Bulletin
Number
B787-81205-SB550011-00 RB
Latest revision known
B787-81205-SB550011-00 RB, Issue 001, dated May 18, 2021

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Text · 80Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0844; AD 2022-09-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '367330fafec7ce602f0e3d2c46de8b5dcf165f8b73268aec1776c181b7b4827f'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Alert Requirements Bulletin B787-81205-SB550011-00 RB STABILIZERS - Vertical Fin Main Box Rear Spar - Inspection Copyright © 2021 Boeing. Unpublished Work. All rights reserved.

Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

EXPORT CONTROLLED Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

ECCN: 9E991 B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 1 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

40 B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

Table of Contents Page

A .E F F E C T I V I T Y3

1. Airplanes3

2 . S p a r e s A f f e c t e d5

B. CONCURRENT REQUIREMENTS5

C .C O M P L I A N C E5

D. APPROVAL ................................................. 1 0 E. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 1

1. General Information ........................................... 1 1

2. Work Instructions ............................................ 1 2 TASK 2 – LEFT SIDE - MAIN BOX SKIN PANEL AND REAR SPAR ROOT FITTING - INSPECTION [Group 1 - 3 ] .................................................. 2 6 TASK 3 – LEFT SIDE - MAIN BOX SKIN PANEL AND REAR SPAR FLANGE - GAP MEASUREMENT [Group 1 - 3 ] .................................................. 3 1 TASK 4 – LEFT SIDE - MAIN BOX SKIN PANEL AND REAR SPAR FLANGE - SHIM INSTALLATION [Group 1 - 3 ] .................................................. 3 5 TASK 5 – LEFT SIDE - MAIN BOX SKIN PANEL - FASTENER INSTALLATION [Group 1] ........ 3 9 TASK 6 – LEFT SIDE - MAIN BOX SKIN PANEL - FASTENER INSTALLATION [Group 2] ........ 4 4 TASK 7 – LEFT SIDE - MAIN BOX SKIN PANEL - FASTENER INSTALLATION [Group 3] ........ 4 9 TASK 11 –RIGHT SIDE - MAIN BOX SKIN PANEL AND REAR SPAR ROOT FITTING - INSPECTION [Group 1 - 3 ] .................................................. 5 4 TASK 12 –RIGHT SIDE - MAIN BOX SKIN PANEL AND REAR SPAR FLANGE - GAP MEASUREMENT [Group 1 - 3 ] .................................................. 5 9 TASK 13 –RIGHT SIDE - MAIN BOX SKIN PANEL AND REAR SPAR FLANGE - SHIM INSTALLATION [Group 1 - 3 ] .................................................. 6 3 TASK 14 –RIGHT SIDE - MAIN BOX SKIN PANEL - FASTENER INSTALLATION [Group 1] ....... 6 7 TASK 15 –RIGHT SIDE - MAIN BOX SKIN PANEL - FASTENER INSTALLATION [Group 2] ....... 7 2 TASK 16 –RIGHT SIDE - MAIN BOX SKIN PANEL - FASTENER INSTALLATION [Group 3] ....... 7 7 B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 2 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:

THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE

BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

A. EFFECTIVITY

1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-687, 689-873, 875- 885, 889-890, 895-897 in 3 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.

Table 1

DESCRIPTIONCONFIGURATIONGROUP 787-8 airplanes with main box shimming requirements not met.- 1 787-8 airplanes with main box shimming requirements not met and different fastener options.

- 2 787-9 and 787-10 airplanes with main box shimming requirements not met.

- 3 Airplane Models: 787-10, 787-8, 787-9 Table 2 GroupVariable Number 1ZA006 1ZA100 - ZA105 1ZA116 - ZA119 2ZA120 - ZA124 1ZA135 2ZA136 - ZA144 2ZA152 - ZA156 1ZA175 - ZA184 2ZA185 - ZA189 GroupVariable Number 2ZA195 - ZA204 2ZA215 - ZA225 1ZA230 - ZA243 2ZA244 - ZA256 1ZA260 - ZA264 2ZA265 - ZA269 1ZA270 - ZA274 2ZA275 - ZA277 1ZA285 - ZA290 GroupVariable Number 2ZA291 - ZA296 1ZA317 - ZA318 2ZA319 - ZA324 2ZA327 2ZA334 - ZA335 2ZA341 - ZA342 1ZA380 - ZA384 2ZA385 - ZA389 1ZA430 - ZA434 B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 3 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

GroupVariable Number 2ZA435 - ZA439 2ZA445 - ZA459 1ZA460 - ZA464 2ZA465 - ZA489 1ZA506 - ZA512 2ZA513 - ZA516 1ZA536 - ZA538 2ZA539 - ZA545 2ZA560 - ZA567 2ZA576 - ZA580 2ZA586 2ZA588 - ZA593 2ZA610 - ZA617 2ZA650 - ZA652 2ZA655 - ZA663 2ZA665 - ZA677 2ZA680 - ZA685 2ZA695 - ZA698 2ZA715 - ZA716 2ZA718 - ZA719 2ZA740 - ZA741 2ZA768 - ZA769 2ZA778 - ZA779 2ZA783 - ZA784 2ZA817 - ZA831 2ZA839 1ZA841 2ZA842 2ZA846 - ZA848 2ZA853 - ZA862 2ZA873 - ZA876 GroupVariable Number 2ZA881 - ZA888 2ZA916 - ZA920 2ZA949 - ZA950 2ZA954 - ZA956 2ZA958 2ZA972 3ZB001 - ZB012 3ZB021 - ZB043 3ZB047 - ZB060 3ZB077 - ZB081 3ZB097 - ZB119 3ZB127 - ZB136 3ZB167 - ZB191 3ZB197 - ZB198 3ZB217 3ZB219 - ZB220 3ZB224 - ZB229 3ZB234 - ZB242 3ZB246 - ZB248 3ZB251 - ZB258 3ZB261 - ZB262 3ZB265 - ZB276 3ZB299 3ZB302 - ZB305 3ZB332 - ZB337 3ZB362 - ZB379 3ZB407 - ZB418 3ZB422 - ZB432 3ZB446 - ZB467 3ZB536 - ZB543 3ZB545 - ZB547 GroupVariable Number 3ZB558 - ZB586 3ZB603 - ZB618 3ZB646 - ZB649 3ZB656 - ZB665 3ZB676 - ZB681 3ZB688 - ZB707 3ZB733 - ZB735 3ZB738 - ZB740 3ZB742 - ZB743 3ZB749 - ZB750 3ZB753 - ZB757 3ZB763 - ZB768 3ZB771 - ZB775 3ZB778 - ZB805 3ZB812 - ZB821 3ZB828 - ZB841 3ZB858 - ZB863 3ZB874 - ZB876 3ZB893 - ZB901 3ZB908 - ZB917 3ZB922 3ZB924 3ZB926 - ZB927 3ZB934 - ZB936 3ZB967 - ZB968 3ZB980 - ZB984 3ZB990 3ZB993 - ZB997 3ZC001 - ZC014 3ZC036 - ZC044 3ZC061 - ZC066 B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 4 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

GroupVariable Number 3ZC116 - ZC117 3ZC126 - ZC127 3ZC151 3ZC155 - ZC156 3ZC211 1ZD001 - ZD009 GroupVariable Number 1ZD012 3ZE001 - ZE006 3ZE013 3ZE031 - ZE032 3ZE040 - ZE042 3ZE085 - ZE086 GroupVariable Number 3ZE090 - ZE091 3ZE095 - ZE096 3ZE150 3ZE165 - ZE166 3ZE195 - ZE198 3ZE220 - ZE224

2. Spares Affected None.

B. CONCURRENT REQUIREMENTS None.

C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB550011-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB550011-00 RB mandatory.

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.

Accomplish the required actions, based on the applicable conditions in Table 5 and Table 6, in accordance with Accomplishment Instructions.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 5 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

Table 5 Left Side Vertical Fin Main Box Rear Spar - Ultrasonic Test and High Frequency Eddy Current (HFEC) Inspection Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs First) ActionCondition -Within 12 years after the date of issuance of the original certificate of airworthiness or the original export certificate of airworthiness.

Before 18,000 total flight cycles.

ACTION 1: Do an Ultrasonic Test of the left side skin panel for any crack and any delamination.

All airplanes.

ACTION 2: Do an open hole HFEC inspection of the left side rear spar root fitting at the fastener holes common to the skin panel and rear spar root fitting interface for any crack.

ACTION 3: Do a surface HFEC inspection of all visible left side rear spar root fitting surface areas for any crack.

-Before further flight.CONDITION 1 (AC- TION 1): Contact The Boeing Company for repair instructions and do the repair.

CONDITION 1: ANY

CRACK OR ANY

DELAMINATION FOUND -Before further flight.CONDITION 1 (AC- TION 2): Measure the gap between the left side skin panel and the rear spar flange.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 6 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

Table 5 Left Side Vertical Fin Main Box Rear Spar - Ultrasonic Test and High Frequency Eddy Current (HFEC) Inspection Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs First) ActionCondition -Before further flight.CONDITION 1.1 (ACTION 1): Install new shim between the left side skin panel and the rear spar flange.

CONDITION 1.1:

GAP MEASURE-

MENT NOT WITHIN

SPECIFIED LIMITS -Before further flight.CONDITION 1.1 (ACTION 2): Install new fasteners in the vertical fin main box rear spar.

-Before further flight.Install new fasteners in the vertical fin main box rear spar.

CONDITION 1.2:

GAP MEASURE-

MENT WITHIN

SPECIFIED LIMITS -Before further flight.Measure the gap between the left side skin panel and the rear spar flange.

CONDITION 2: NO

CRACK AND NO

DELAMINATION FOUND -Before further flight.CONDITION 2.1 (ACTION 1): Install new shim between the left side skin panel and the rear spar flange.

CONDITION 2.1:

GAP MEASURE-

MENT NOT WITHIN

SPECIFIED LIMITS -Before further flight.CONDITION 2.1 (ACTION 2): Install new fasteners in the vertical fin main box rear spar.

-Before further flight.Install new fasteners in the vertical fin main box rear spar.

CONDITION 2.2:

GAP MEASURE-

MENT WITHIN

SPECIFIED LIMITS B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 7 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

Table 6 Right Side Vertical Fin Main Box Rear Spar - Ultrasonic Test and High Frequency Eddy Current (HFEC) Inspection Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs First) ActionCondition -Within 12 years after the date of issuance of the original certificate of airworthiness or the original export certificate of airworthiness.

Before 18,000 total flight cycles.

ACTION 1: Do an Ultrasonic Test of the right side skin panel for any crack and any delamination.

All airplanes.

ACTION 2: Do an open hole HFEC inspection of the right side rear spar root fitting at the fastener holes common to the skin panel and rear spar root fitting interface for any crack.

ACTION 3: Do a surface HFEC inspection of all visible right side rear spar root fitting surface areas for any crack.

-Before further flight.CONDITION 3 (AC- TION 1): Contact The Boeing Company for repair instructions and do the repair.

CONDITION 3: ANY

CRACK OR ANY

DELAMINATION FOUND -Before further flight.CONDITION 3 (AC- TION 2): Measure the gap between the right side skin panel and the rear spar flange.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 8 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

Table 6 Right Side Vertical Fin Main Box Rear Spar - Ultrasonic Test and High Frequency Eddy Current (HFEC) Inspection Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs First) ActionCondition -Before further flight.CONDITION 3.1 (ACTION 1): Install new shim between the right side skin panel and the rear spar flange.

CONDITION 3.1:

GAP MEASURE-

MENT NOT WITHIN

SPECIFIED LIMITS -Before further flight.CONDITION 3.1 (ACTION 2): Install new fasteners in the vertical fin main box rear spar.

-Before further flight.Install new fasteners in the vertical fin main box rear spar.

CONDITION 3.2:

GAP MEASURE-

MENT WITHIN

SPECIFIED LIMITS -Before further flight.Measure the gap between the right side skin panel and the rear spar flange.

CONDITION 4: NO

CRACK AND NO

DELAMINATION FOUND -Before further flight.CONDITION 4.1 (ACTION 1): Install new shim between the right side skin panel and the rear spar flange.

CONDITION 4.1:

GAP MEASURE-

MENT NOT WITHIN

SPECIFIED LIMITS -Before further flight.CONDITION 4.1 (ACTION 2): Install new fasteners in the vertical fin main box rear spar.

-Before further flight.Install new fasteners in the vertical fin main box rear spar.

CONDITION 4.2:

GAP MEASURE-

MENT WITHIN

SPECIFIED LIMITS B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 9 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 10 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

E. ACCOMPLISHMENT INSTRUCTIONS

1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC;

this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.

2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.

3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.

4. The compliance times for the actions in Work Instructions are in Compliance.

5. If the length of any fastener specified in this service bulletin does not meet the installation standards in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards in SRM Chapter 51 may be used. In addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation in this service bulletin.

6. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.

7. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.

8. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers.When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 11 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN

11. Unless shown differently, these dimensions and tolerances are used:

– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51 – Torque Values:

– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter

51.

– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Maintenance Manual (AMM).

– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).

– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Maintenance Manual (AMM).

– Non-standard torque values for maintenance tasks are included in the applicable installation step.

12. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.

2. WORK INSTRUCTIONS A. Actions Required for Compliance.

(1) Requirements B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM Page 12 of 80 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB550011-00 RB Issue 001, 18 May 2021 12:00:00 AM

REQUIREMENTS BULLETIN