On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2410; AD 2025-06-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2410; AD 2025-06-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Boeing
- Type
- Alert Requirements Bulletin
- Number
- B787-81205-SB550013-00 RB
- Latest revision known
- B787-81205-SB550013-00 RB, Issue 001, dated August 30, 2024
- Copies
- 2 files of 1 revision
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 69Partly OCR
Revision 001, part 1 of 2, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2410; AD 2025-06-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c2a5136ae11e3d9651523cd24e0a648d9534dcde3eaf66e05c996c3fb5bee200' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c2a5136ae11e3d9651523cd24e0a648d9534dcde3eaf66e05c996c3fb5bee200' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ALERT Alert Requirements Bulletin B787-81205-SB550013-00 RB STABILIZERS - Horizontal Stabilizers - Pivot Fitting Inspection and Replacement Copyright © 2024 The Boeing Company Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991 B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 1 of 77 Export Controlled ECCN: 9E991 See page 1 for details
3.0 B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Table of Contents Page
A. EFFECTIVITY3
1. Airplanes3
2. Spares Affected5
B. CONCURRENT REQUIREMENTS5
C. COMPLIANCE6
D. APPROVAL7
E. ACCOMPLISHMENT INSTRUCTIONS8
1. General Information8
2. Work Instructions10
TASK 1 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
1]18
TASK 2 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 1] . 24 TASK 3 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
1]33
TASK 4 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 1] . 39 TASK 5 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
2]48
TASK 6 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 2] . 54 TASK 7 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
2]63
TASK 8 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 2] . 69 B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 2 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-59, 61-80, 82-112, 114-143, 145-153, 155-171, 173-175, 177-187, 189-191, 193-199, 201-203, 205-207, 209-219, 221-223, 225-226, 228-229, 231, 233-234, 236-238, 240-241, 243-244, 246, 248-249, 251-253, 255-256, 258-259, 261, 263-264, 266-278, 280-281, 283, 285-288, 290, 292-293, 295-296, 298- 687, 689-897, 899-912, 914-954, 956-970, 972-982, 984-989, 991-996, 999, 1001-1008, 1012- 1013, 1017-1018, 1021-1022, 1024-1026, 1029-1032, 1038, 1041, 1044-1045, 1047-1048, 1054- 1062, 1071, 1074-1075, 1087, 1091, 1094-1095, 1098-1099, 1103, 1109, 1112, 1126, 1129-1134, 1136-1138, 1141 in 2 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
Table 1
DESCRIPTIONCONFIGURATIONGROUP 787-8 Airplanes delivered with possible horizontal stabilizer pivot pin lockring, outer pivot pin, and outboard spacer misalignment and incorrect gapping.
-1 787-8, -9, and -10 Airplanes delivered with possible horizontal stabilizer pivot pin lockring, outer pivot pin, and outboard spacer misalignment and incorrect gapping.
-2 Airplane Models: 787-10, 787-8, 787-9 Table 2 GroupVariable Number 1ZA006 1ZA100 - ZA105 1ZA116 - ZA124 1ZA135 - ZA144 1ZA152 - ZA156 GroupVariable Number 1ZA175 - ZA189 1ZA195 - ZA204 1ZA215 - ZA220 1ZA223 - ZA225 1ZA230 - ZA238 GroupVariable Number 1ZA240 - ZA245 1ZA249 - ZA256 1ZA260 - ZA277 1ZA285 - ZA296 1ZA317 - ZA322 B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 3 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
GroupVariable Number 1ZA324 1ZA327 1ZA334 1ZA342 1ZA380 - ZA387 1ZA430 - ZA432 1ZA434 - ZA437 1ZA439 1ZA445 - ZA470 1ZA472 1ZA475 - ZA489 1ZA506 - ZA516 1ZA536 - ZA538 1ZA540 - ZA545 1ZA560 - ZA567 1ZA576 - ZA580 1ZA586 1ZA588 - ZA593 1ZA610 - ZA612 1ZA650 - ZA651 1ZA655 - ZA656 1ZA659 1ZA662 - ZA663 1ZA665 - ZA666 1ZA670 - ZA677 1ZA680 1ZA682 1ZA684 - ZA685 1ZA695 - ZA698 1ZA715 - ZA716 1ZA718 - ZA719 GroupVariable Number 1ZA740 1ZA768 - ZA769 1ZA778 - ZA779 1ZA783 - ZA784 1ZA817 - ZA831 1ZA839 1ZA841 - ZA842 1ZA846 - ZA848 1ZA853 - ZA862 1ZA873 - ZA874 2ZA875 1ZA876 1ZA881 - ZA888 1ZA916 - ZA920 1ZA949 - ZA950 1ZA954 - ZA959 1ZA963 - ZA966 1ZA968 - ZA972 1ZA990 2ZB001 - ZB012 2ZB021 - ZB043 2ZB047 - ZB060 2ZB077 - ZB081 2ZB097 - ZB121 2ZB127 - ZB128 2ZB130 - ZB136 2ZB167 - ZB171 2ZB173 - ZB191 2ZB197 - ZB198 2ZB217 2ZB219 - ZB220 GroupVariable Number 2ZB224 - ZB229 2ZB234 - ZB242 2ZB246 - ZB248 2ZB251 - ZB258 2ZB261 - ZB262 2ZB265 - ZB279 2ZB299 2ZB302 - ZB305 2ZB332 - ZB338 2ZB362 - ZB379 2ZB407 - ZB435 2ZB446 - ZB467 2ZB536 - ZB543 2ZB545 - ZB547 2ZB558 - ZB586 2ZB603 - ZB618 2ZB646 - ZB649 2ZB656 - ZB665 2ZB676 - ZB681 2ZB688 - ZB707 2ZB733 - ZB735 2ZB738 - ZB740 2ZB742 - ZB745 2ZB749 - ZB750 2ZB753 - ZB757 2ZB763 - ZB768 2ZB771 - ZB775 2ZB778 - ZB808 2ZB810 - ZB821 2ZB828 - ZB841 2ZB858 - ZB863 B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 4 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
GroupVariable Number 2ZB874 - ZB876 2ZB890 2ZB893 - ZB902 2ZB908 - ZB918 2ZB922 2ZB924 2ZB926 - ZB927 2ZB934 - ZB946 2ZB951 2ZB967 - ZB971 2ZB977 - ZB978 2ZB980 - ZB986 2ZB990 - ZB991 2ZB993 - ZB997 2ZC001 - ZC015 2ZC036 - ZC048 2ZC051 - ZC056 2ZC061 - ZC069 2ZC101 - ZC103 2ZC106 - ZC107 2ZC116 - ZC118 2ZC126 - ZC129 GroupVariable Number 2ZC151 - ZC152 2ZC155 - ZC158 2ZC211 - ZC216 2ZC218 - ZC219 2ZC221 - ZC225 1ZD001 - ZD009 1ZD012 - ZD014 2ZD015 1ZD016 - ZD024 1ZD027 2ZE001 - ZE006 2ZE008 2ZE013 2ZE016 - ZE017 2ZE031 - ZE032 2ZE040 - ZE045 2ZE048 2ZE085 - ZE086 2ZE090 - ZE091 2ZE095 - ZE096 2ZE100 2ZE105 - ZE106 GroupVariable Number 2ZE110 2ZE112 2ZE115 2ZE150 2ZE165 - ZE166 2ZE170 - ZE171 2ZE195 - ZE198 2ZE220 - ZE234 2ZE238 2ZE270 2ZE310 - ZE311 2ZE340 - ZE341 2ZE350 - ZE362 2ZE375 2ZE380 - ZE381 2ZE415 - ZE416 2ZE425 - ZE426 2ZE435 - ZE437 2ZE455 - ZE456 2ZE481 2ZE486 - ZE487 --
2. Spares Affected None.
B. CONCURRENT REQUIREMENTS None.
B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 5 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB550013-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB550013-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
Accomplish the required actions, based on the applicable conditions in Table 5 and Table 6 accordance with the Accomplishment Instructions.
Table 5 Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 32 months after the Issue 001 date of Requirements Bulletin B787-81205- SB550013-00 RB.
Do a Detailed Inspection (DET) of the left side horizontal stabilizer pivot pin assembly for misalignment and incorrect gapping.
*[1]*[2] All Airplanes.
--No further action required.CONDITION 1: NO MIS-
ALIGNMENT OR INCOR- RECT GAPPING FOUND.
-Before further flight.
Replace the left side horizontal stabilizer pivot pin assembly.
CONDITION 2: ANY MIS-
ALIGNMENT OR ANY IN-
CORRECT GAPPING FOUND.
*[1] Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[2] Incorrect gapping is defined as having any gap between the anti-rotation plate and the outer pin, having a gap between the inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
Table 6 Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 32 months after the Issue 001 date of Requirements Bulletin B787-81205- SB550013-00 RB.
Do a Detailed Inspection (DET) of the right side horizontal stabilizer pivot pin assembly for misalignment and incorrect gapping.
*[1]*[2] All Airplanes.
B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 6 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Table 6 Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection Repeat Interval (Not to Exceed) Compliance TimeActionCondition --No further action required.CONDITION 3: NO MIS-
ALIGNMENT OR INCOR- RECT GAPPING FOUND.
-Before further flight.
Replace the right side horizontal stabilizer pivot pin assembly.
CONDITION 4: ANY MIS-
ALIGNMENT OR ANY IN-
CORRECT GAPPING FOUND.
*[1] Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[2] Incorrect gapping is defined as having any gap between the anti-rotation plate and the outer pin, having a gap between the inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 7 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51 – Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Maintenance Manual (AMM).
B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 8 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.
5. If the length of any fastener specified in this bulletin does not meet the installation standards in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards in SRM Chapter 51 may be used. In addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01, Bolt and Nut Installation, for alternate full threaded fasteners (screws) needed for installation in this bulletin.
6. A Detailed Inspection (DET) is defined as: An intensive examination of a specific item, installation, or assembly to detect damage, failure, or irregularity. This could include tactile assessment in which a component or assembly can be checked for tightness/security.
Available lighting is normally supplemented with a direct source of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors,magnifying lenses, etc.
may be necessary. Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
8. Boeing Service Letter 787-SL-51-001, Damage Reporting and Repair Plan/Design Guidelines, is an acceptable procedure to request information from Boeing for additional structural repair instructions. The Service Letter describes what information must be provided to Boeing before a structural repair can be provided
9. The Work Instructions and the Tasks can include operation of tools or test equipment.
Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing Index contain data on versions of the tools or test equipment that you can use. It is permitted to use replaced tools. It is not permitted to use superseded tools.
B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 9 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
10. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
11. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.
12. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
2. WORK INSTRUCTIONS A. Actions Required for Compliance:
Requirements(1) Group 1:
Table 1 Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection Refer to the listed procedures in Alert Service Bulletin B787-81205- SB550013-00 Issue 001 or later approved revisions as an accepted procedure:
Method of Compliance ActionCondition PART 1: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - OPEN AC- CESS -Do a detailed inspection of the left side horizontal stabilizer pivot pin assembly for misalignment and incorrect gapping. *[1]*[2] All Airplanes.
-Task 1 PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA- TION -No further action required.CONDITION 1: NO MIS-
ALIGNMENT OR INCOR- RECT GAPPING FOUND.
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE ACCESS - B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 10 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Group 1:
Table 1 Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection Refer to the listed procedures in Alert Service Bulletin B787-81205- SB550013-00 Issue 001 or later approved revisions as an accepted procedure:
Method of Compliance ActionCondition PART 2: LEFT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT - PREPARA- TION -Replace the left side horizontal stabilizer pivot pin assembly.
CONDITION 2: ANY MIS-
ALIGNMENT OR INCOR- RECT GAPPING FOUND.
-Task 2 PART 4: LEFT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE- MENT -
RESTORATION - PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA- TION - PART 7: REPLACE-
MENT HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY - OPERA-
TIONAL TEST - PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE ACCESS - *[1] Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[2] Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 11 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Group 1:
Table 2 Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection Refer to the listed procedures in Alert Service Bulletin B787-81205- SB550013-00 Issue 001 or later approved revisions as an accepted procedure:
Method of Compliance ActionCondition PART 1: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - OPEN AC- CESS -Do a detailed inspection of the right side horizontal stabilizer pivot pin assembly for misalignment and incorrect gapping. *[1]*[2] All Airplanes.
-Task 3 PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA- TION -No further action required.CONDITION 3: NO MIS-
ALIGNMENT OR INCOR- RECT GAPPING FOUND.
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE ACCESS - B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM Page 12 of 77 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB550013-00 RB Issue 001, 30 Aug 2024 12:00:00 AM