Revision 001RB-787-57A0048-01--reduced · 180 pages · 3.1 MB

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-2295; AD 2026-17-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2026-2295 (document 0002) · AD 2026-17-02

Manufacturer
Boeing
Type
Alert Requirements Bulletin
Number
B787-81205-SB570048-00 RB
Latest revision known
B787-81205-SB570048-00 RB, Issue 001, dated August 11, 2025

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Text · 180Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-2295; AD 2026-17-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'a91b92047e412fda4be6a8f811ccfb83248e854d23bdd7762a7ffac1626d0c23'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

ALERT Alert Requirements Bulletin B787-81205-SB570048-00 RB WINGS - Center Wing - Lower Side of Body Splice Plate and Wing Structure Inspection Copyright © 2025 The Boeing Company Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

EXPORT CONTROLLED This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.

ECCN: 9E991 B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 1 of 180 Export Controlled ECCN: 9E991 See page 1 for details

4.0 B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

Table of Contents Page A. EFFECTIVITY .

.3

1. Airplanes3

2. Spares Affected4

B. CONCURRENT REQUIREMENTS4

C. COMPLIANCE5

D. APPROVAL40

E. ACCOMPLISHMENT INSTRUCTIONS41

1. General Information41

2. Work Instructions43

TASK 1 – LEFT WING AND RIGHT WING - SPLICE PLATE NO. 1 AND SPLICE PLATE NO. 2 INSPECTION

FWD OF THE REAR SPAR TERMINAL FITTING [Group 1, 3, 5, 8]130

TASK 2 – LEFT WING AND RIGHT WING - SPLICE PLATE NO. 1 INSPECTION FWD OF THE REAR SPAR

TERMINAL FITTING [Group 2, 4, 9]135

TASK 3 – LEFT WING AND RIGHT WING - REAR SPAR TERMINAL FITTING INSPECTION [Group 1, 3, 5,

8]140

TASK 4 – LEFT WING AND RIGHT WING - SPLICE PLATE NO. 1 INSPECTION AT THE REAR SPAR

TERMINAL FITTING [Group 1, 3, 5, 8]145

TASK 5 – LEFT WING AND RIGHT WING - REAR SPAR TERMINAL FITTING INSPECTION [Group 2, 4, 6-7,

9]150

TASK 6 – LEFT WING AND RIGHT WING - SPLICE PLATE NO. 1 INSPECTION AT THE REAR SPAR

TERMINAL FITTING [Group 2, 4, 6-7, 9]155

TASK 7 – LEFT WING AND RIGHT WING - LOWER CHORD INSPECTION [Group 1, 3, 5, 8]160

TASK 8 – LEFT WING AND RIGHT WING - LOWER CHORD INSPECTION [Group 2, 9]166

TASK 9 – LEFT WING AND RIGHT WING - FRONT SPAR TERMINAL FITTING INSPECTION [Group 7] . 172

TASK 10 – LEFT WING AND RIGHT WING - JACK PAD INSPECTION [Group 7]177

B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 2 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO Alert:

THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.

THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

A.

EFFECTIVITY

1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 46, 54, 60, 65, 72, 76, 81, 85, 91, 95, 100, 104, 109, 113, 119, 124-125, 129, 132, 135, 138, 140, 144-145, 150, 154, 158, 164, 168, 172, 176, 180, 184, 188, 192, 196, 269, 300, 304, 307, 317, 343, 347, 355, 363, 369, 379, 387, 409, 429, 437, 450, 455, 469, 476, 482, 489, 492, 508, 510, 533-534, 541, 556, 558, 563, 570, 572, 575, 577, 580, 582, 584, 587, 610, 629, 800 in 9 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.

Table 1

DESCRIPTIONCONFIGURATIONGROUP 787-8 Airplane Line Numbers 437, 482 with pull up conditions that result in reduced inspection thresholds and intervals

- 1 787-9 Airplane Line Numbers 455, 541 with pull up conditions that result in reduced inspection thresholds and intervals

- 2 787-8 Airplane Line Numbers 317, 347, 489 with pull up conditions that result in reduced inspection thresholds and intervals

- 3 787-9 Airplane Line Numbers 369, 379, 363, 533 with pull up conditions that result in reduced inspection thresholds and intervals

- 4 787-8 Airplane Line Numbers 304, 307, 429 with pull up conditions that result in reduced inspection thresholds and intervals

- 5 787-9 Airplane Line Numbers 409, 469, 492, 510, 629 with pull up conditions that result in reduced inspection thresholds and intervals

- 6 787-10 Airplane Line Number 800 with pull up conditions that result in reduced inspection thresholds and intervals

- 7 787-8 Airplane Line Numbers 46, 54, 60, 65, 72, 76, 81, 85, 91, 95, 100, 104, 109, 113, 119, 124, 125, 129, 132, 135, 138, 140, 144, 145, 150, 154, 158, 164, 168, 172, 176, 180, 184, 188, 192, 196, 300, 343, 387, 476, 508 with pull up conditions that result in reduced inspection thresholds and intervals

- 8 B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 3 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

Table 1

DESCRIPTIONCONFIGURATIONGROUP 787-9 Airplane Line Numbers 269, 355, 450, 534, 556, 558, 563, 570, 572, 575, 577, 580, 582, 584, 587, 610 with pull up conditions that result in reduced inspection thresholds and intervals

- 9 Airplane Models: 787-10, 787-8, 787-9 Table 2 GroupVariable Number 8ZA123 8ZA187 8ZA237 - ZA241 8ZA243 - ZA245 3ZA251 8ZA265 8ZA267 - ZA268 8ZA292 - ZA294 8ZA342 8ZA384 - ZA389 8ZA431 8ZA433 - ZA434 8ZA467 8ZA469 - ZA474 8ZA515 8ZA539 8ZA656 - ZA657 5ZA662 GroupVariable Number 3ZA663 3ZA670 8ZA673 5ZA684 8ZA685 8ZA830 1ZA882 - ZA883 8ZA885 5ZA917 4ZB034 9ZB040 2ZB050 6ZB058 9ZB170 9ZB177 4ZB178 9ZB424 6ZB450 GroupVariable Number 9ZB453 - ZB455 9ZB457 6ZB566 9ZB576 4ZB604 9ZB618 9ZB648 9ZB658 2ZB679 9ZB697 4ZB703 9ZB705 9ZB733 6ZB764 6ZB786 9ZB790 7ZC041 --

2. Spares Affected None.

B.

CONCURRENT REQUIREMENTS None.

B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 4 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB570048-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB570048-00 RB mandatory.

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.

Accomplish the required actions, based on the applicable conditions in Tables 6 through 27 in accordance with the Accomplishment Instructions.

Group 1:

Table 6 Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed Inspection (DET) Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition -Whichever occurs first:

Whichever occurs first:

ACTION 1: Do an Ultrasonic (UT) inspection of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[1]*[2] All Airplanes

1. Within 24 months after the Issue 001 date of the Requirements Bulletin B787- 81205-SB570048-00 RB

1. Before 6,000 total flight cycles

2. Before 40,500 total flight hours

3.Before the result of 6857.14 -

(0.095238*TFH)-TFC is less than or equal to zero.*[3] ACTION 2: Do a Detailed Inspection (DET) of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[1]*[2]

2. Within 2,000 flight cycles after the Issue 001 date of the Requirements Bulletin B787-81205- SB570048-00 RB.

ACTION 3: Do a UT inspection of Splice Plate No. 1 at the Rear Spar Terminal Fitting for any crack.

*[1] B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 5 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

Group 1:

Table 6 Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed Inspection (DET) Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition Whichever occurs first:

-CONDITION 1 (AC- TION 1): Repeat the UT inspection of Splice Plate No. 1 and Splice Plate No.

2 for any crack.*[4]*[1]*[2] CONDITION 1: NO

CRACK FOUND

1. 6,000 flight cycles

2. 40,500 flight hours

3. Before the result of 7,764.71 -

(0.117647*FH) - FC is less than or equal to zero. *[5]-CONDITION 1 (AC-TION 2): Repeat the DET of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[4]*[1]*[2] -CONDITION 1 (AC- TION 3): Repeat the UT inspection of Splice Plate No. 1 at the Rear Spar Terminal Fitting for any crack.*[4]*[1] B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 6 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

Group 1:

Table 6 Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed Inspection (DET) Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition -Before further flight.CONDITION 2 (AC- TION 1): Contact The Boeing Company for repair instructions and do the repair.

CONDITION 2: ANY

CRACK FOUND Whichever occurs first:

-CONDITION 2 (AC- TION 2): Repeat the UT inspection of Splice Plate No. 1 and Splice Plate No.

2 for any crack.*[4]*[1]*[2]

1. 6,000 flight cycles

2. 40,500 flight hours

3. Before the result of 7,764.71 -

(0.117647*FH) - FC is less than or equal to zero. *[5]-CONDITION 2 (AC-TION 3): Repeat the DET of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[4]*[1]*[2] -CONDITION 2 (AC- TION 4): Repeat the UT inspection of Splice Plate No. 1 at the Rear Spar Terminal Fitting for any crack.*[4]*[1] *[1] It is not required to do this inspection two times at the same maintenance check.

*[2] The inspector who does the UT Inspection must be different than the inspector who does the DET.

*[3] TFH = Total Flight Hours. TFC = Total Flight Cycles.

*[4] It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions that follow:

1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.

2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.

*[5] FH = Flight Hours. FC = Flight Cycles.

B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 7 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

Group 1:

Table 7 Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time ActionCondition -Whichever occurs first:ACTION 1: Do an Ultrasonic (UT) inspection of the Rear Spar Terminal Fitting for any crack.

All Airplanes

1. Before 33,000 total flight cycles

2. Before 101,250 total flight hours

3. Before the result of 57,391.30 -

(0.492754*TFH) - TFC is less than or equal to zero. *[1] ACTION 2: Do a UT inspection of Splice Plate No. 1 at the Rear Spar Terminal Fitting for any crack. *[2] Whichever occurs first:

-CONDITION 3 (ACTION

1): Repeat the UT inspection of the Rear Spar Terminal Fitting for any crack.*[3] CONDITION 3: NO

CRACK FOUND

1. 6,000 flight cycles

2. 40,500 flight hoursCONDITION 3 (ACTION

2): Repeat the UT inspection of Splice Plate No. 1 at the Rear Spar Terminal Fitting for any crack.*[3]*[2]

3. Before the result of 7,764.71 -

(0.117647*FH) - FC is less than or equal to zero. *[4] -Before further flight.CONDITION 4 (ACTION

1): Contact The Boeing Company for repair instructions and do the repair.

CONDITION 4: ANY

CRACK FOUND Whichever occurs first:

-CONDITION 4 (ACTION

2): Repeat the UT inspection of the Rear Spar Terminal Fitting for any crack *[3]

1. 6,000 flight cycles

2. 40,500 flight hoursCONDITION 4 (ACTION

3): Repeat the UT inspection of Splice Plate No. 1 at the Rear Spar Terminal Fitting for any crack.*[3]*[2]

3. Before the result of 7,764.71 -

(0.117647*FH) - FC is less than or equal to zero. *[4] *[1] TFH = Total Flight Hours. TFC = Total Flight Cycles.

*[2] It is not required to do this inspection two times at the same maintenance check.

*[3] It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions that follow:

1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.

2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.

B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 8 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

Group 1:

Table 7 Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection *[4] FH = Flight Hours. FC = Flight Cycles.

Group 1:

Table 8 Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed Inspection (DET) Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time ActionCondition -Whichever occurs first:ACTION 1: Do an Ultrasonic (UT) inspection of the Lower Chord for any crack.

All Airplanes

1. Before 33,000 total flight cycles

2. Before 101,250 total flight hoursACTION 2: Do a UT inspec-tion of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[2]*[3]

3. Before the result of 53,086.96 -

(0.405797*TFH) - TFC is less than or equal to zero. *[1]ACTION 3: Do a DetailedInspection (DET) of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[2]*[3] Whichever occurs first:

-CONDITION 5 (ACTION

1): Repeat the UT inspection of the Lower Chord for any crack.*[4] CONDITION 5: NO

CRACK FOUND

1. 6,000 flight cycles

2. 40,500 flight hoursCONDITION 5 (ACTION

2): Repeat the UT inspection of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[4]*[2]*[3]

3. Before the result of 7,764.71 -

(0.117647*FH) - FC is less than or equal to zero. *[5]CONDITION 5 (ACTION

3): Repeat the DET of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[4]*[2]*[3] B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 9 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

Group 1:

Table 8 Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed Inspection (DET) Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time ActionCondition -Before further flight.CONDITION 6 (ACTION

1): Contact The Boeing Company for repair instructions and do the repair.

CONDITION 6: ANY

CRACK FOUND Whichever occurs first:

-CONDITION 6 (ACTION

2): Repeat the UT inspection of the Lower Chord for any crack. *[4]

1. 6,000 flight cycles

2. 40,500 flight hoursCONDITION 6 (ACTION

3): Repeat the UT inspection of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[4]*[2]*[3]

3. Before the result of 7,764.71 -

(0.117647*FH) - FC is less than or equal to zero. *[5]CONDITION 6 (ACTION

4): Repeat the DET of Splice Plate No. 1 and Splice Plate No. 2 for any crack.*[4]*[2]*[3] *[1] TFH = Total Flight Hours. TFC = Total Flight Cycles.

*[2] It is not required to do this inspection two times at the same maintenance check.

*[3] The inspector who does the UT Inspection must be different than the inspector who does the DET.

*[4] It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions that follow:

1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.

2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.

*[5] FH = Flight Hours. FC = Flight Cycles.

B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 10 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

Group 2:

Table 9 Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition -Whichever occurs first:

Whichever occurs first:

ACTION 1: Do an Ultrasonic (UT) inspection of Splice Plate No. 1 for any crack.

*[1] All Airplanes

1. Within 24 months after the Issue 001 date of the Requirements Bulletin B787- 81205-SB570048-00 RB

1. Before 6,000 total flight cycles

2. Before 40,500 total flight hours

3.Before the result of 6857.14 -

(0.095238*TFH)-TFC is less than or equal to zero.*[2] ACTION 2: Do a UT inspection of Splice Plate No. 1 at the Rear Spar Terminal Fitting for any crack.

*[1]

2. Within 2,000 flight cycles after the Issue 001 date of the Requirements Bulletin B787-81205- SB570048-00 RB Whichever occurs first:

-CONDITION 7 (AC- TION 1): Repeat the UT inspection of Splice Plate No. 1 for any crack.*[3]*[1] CONDITION 7: NO

CRACK FOUND

1. 6,000 flight cycles

2. 40,500 flight hours

3. Before the result of 7,764.71 -

(0.117647*FH) - FC is less than or equal to zero. *[4] -CONDITION 7 (AC- TION 2): Repeat the UT inspection of Splice Plate No. 1 at the Rear Spar Terminal Fitting for any crack.*[3]*[1] B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 11 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN

Group 2:

Table 9 Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition -Before further flight.CONDITION 8 (AC- TION 1): Contact The Boeing Company for repair instructions and do the repair.

CONDITION 8: ANY

CRACK FOUND Whichever occurs first:

-CONDITION 8 (AC- TION 2): Repeat the UT inspection of Splice Plate No. 1 for any crack. *[3]*[1]

1. 6,000 flight cycles

2. 40,500 flight hours

3. Before the result of 7,764.71 -

(0.117647*FH) - FC is less than or equal to zero. *[4] -CONDITION 8 (AC- TION 3): Repeat the UT inspection of Splice Plate No. 1 at the Rear Spar Terminal Fitting for any crack.*[3]*[1] *[1] It is not required to do this inspection two times at the same maintenance check.

*[2] TFH = Total Flight Hours. TFC = Total Flight Cycles.

*[3] It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions that follow:

1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.

2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.

*[4] FH = Flight Hours. FC = Flight Cycles.

B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM Page 12 of 180 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB570048-00 RB Issue 001, 11 Aug 2025 12:00:00 AM

REQUIREMENTS BULLETIN