On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

Revision 001B787-81205-78A0041 RB-01-- · 24 pages · 597 KB

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2020-0465; AD 2020-26-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-0465 (document 0002) · AD 2020-26-08

787-78A0041 RB Issue 002787-78A0041 RB Issue 002 · 27 pages · 715 KB

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2023-1037; AD 2024-01-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2023-1037 (document 0002) · AD 2024-01-04

Manufacturer
Boeing
Type
Alert Requirements Bulletin
Number
B787-81205-SB780041-00 RB
Latest revision known
B787-81205-SB780041-00 RB, Issue 002, dated December 21, 2021

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 2

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 2 proposed ADs.

Text · 24Partly OCR

Revision 001, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2020-0465; AD 2020-26-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '611787f4917007b2bf150c31d4961e48140946ea94b05779d042a278a326529b'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Alert Requirements Bulletin B787-81205-SB780041-00 RB THRUST REVERSER SYSTEM (ROLLS-ROYCE TRENT 1000 ENGINES) - Thrust Reverser - Inner Fixed Structure Forward Upper Fire Seal and Thermal Blanket - Inspection Copyright © 2020 Boeing. Unpublished Work. All rights reserved.

Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

EXPORT CONTROLLED Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

ECCN: 9E991 B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 1 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

7.0 B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

Table of Contents Page

A. EFFECTIVITY3

1. Airplanes3

2. Spares Affected5

B. CONCURRENT REQUIREMENTS5

C. COMPLIANCE5

D. APPROVAL11

E. ACCOMPLISHMENT INSTRUCTIONS12

1. General Information12

2. Work Instructions13

Appendix A – ENGINE - THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER FIRE SEAL AND THERMAL BLANKET - GENERAL VISUAL INSPECTIONS [Group 1, Configuration

1]22

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 2 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:

THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE

BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

A. EFFECTIVITY

1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s) equipped with Rolls-Royce engines, line number(s) 7-10, 12-16, 18, 22, 24, 31, 40-42, 47-48, 51, 56, 59, 61, 63, 66-69, 74, 78, 80, 83, 86-88, 97, 101-102, 107-108, 110-114, 118, 120-121,126, 128, 130, 132-133, 136, 140, 146-149, 153, 156, 161, 165-166, 169, 173, 177-179, 183, 185, 187, 190, 193, 195, 197, 199, 202-203, 205- 206, 209-210, 213, 217-218, 226, 228, 234, 236, 239-240, 242-244, 246, 256, 259, 267, 272, 276, 279-280, 284, 287, 294-296, 299, 308-310, 313-316, 319, 322, 325, 327, 329, 331, 335, 337-338, 341, 345-347, 349-351, 357-358, 360-361, 367, 369-370, 373-375, 377, 382, 386, 392, 396-397, 399-401, 403-404, 406, 408, 414-415, 418-419, 421, 424, 426, 428, 431, 433, 435-437, 442, 447, 450-451, 454-456, 460-462, 467-468, 471-472, 474-476, 479, 481-482, 484, 487-488, 490-491, 493, 497, 504-505, 508-509, 513, 521, 524, 528, 532, 534-535, 538, 550, 552, 556-557, 559, 565, 568, 571, 573, 576, 581-584, 588-590, 593, 599-600, 602-605, 607-609, 612, 616, 619, 621-625, 627, 629, 633, 636, 638-639, 645, 647, 651, 656, 658, 660, 662, 664-666, 671-675, 678, 680-682, 685-686, 688-689, 691, 693-695, 697-698, 700-701, 707-710, 714-715, 717, 719, 721, 732-733, 735, 739, 741, 749, 751, 755-756, 760, 762, 765, 769, 771-772, 794, 803-804, 809, 813, 816, 823, 827, 829, 834-839, 843-844, 846, 849, 851-853, 855-856, 861, 863, 869-870, 875, 877-878, 882, 884-885, 888, 896, 901, 904, 907, 914, 919-920, 922, 925, 928, 935, 938, 947, 952, 955-956, 968, 971, 973, 978, 982-985, 988, 992, 995, 997, 1000, 1003, 1006, 1011, 1015, 1023, 1026, 1028, 1033, 1036, 1039-1040, 1042, 1046-1047, 1056, 1060, 1062, 1065, 1068, 1070, 1072, 1076, 1080, 1082-1083, 1085-1086, 1090-1092, 1094-1095, 1097-1098, 1112-1113, 1122-1123, 1126, 1132- 1134, 1136-9996 in 1 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.

NOTE: The Variable Number table below includes all affected airplanes up to Line Number 1159.

Affected airplanes after Line Number 1159 will show up as available as they are added to Maintenance Performance Toolbox.

Table 1

DESCRIPTIONCONFIGURATIONGROUP 787-8, 787-9, and 787-10 Airplanes-1 Airplanes with Rolls-Royce Trent 1000 Engine Thrust Reversers1 Airplanes with General Electric (GE) Engine Thrust Reversers2 B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 3 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

Airplane Models: 787-10, 787-8, 787-9 Table 2 GroupVariable Number 1ZA100 - ZA105 1ZA116 - ZA124 1ZA135 - ZA144 1ZA270 - ZA277 1ZA445 - ZA459 1ZA506 - ZA516 1ZA536 - ZA545 1ZA576 - ZA580 1ZA588 - ZA593 1ZA650 - ZA652 1ZA665 - ZA677 1ZA778 - ZA779 1ZA839 1ZA842 1ZA853 - ZA863 1ZA881 - ZA888 1ZA949 - ZA950 1ZA958 - ZA959 1ZA963 - ZA966 1ZB001 - ZB012 1ZB027 - ZB043 1ZB047 - ZB061 1ZB127 - ZB136 1ZB197 - ZB198 1ZB219 - ZB220 1ZB224 - ZB229 1ZB251 - ZB258 GroupVariable Number 1ZB265 - ZB268 1ZB362 - ZB379 1ZB407 - ZB421 1ZB611 - ZB618 1ZB646 - ZB649 1ZB688 - ZB702 1ZB733 - ZB735 1ZB742 - ZB743 1ZB749 - ZB751 1ZB753 - ZB757 1ZB766 - ZB767 1ZB818 - ZB821 1ZB828 - ZB845 1ZB858 - ZB863 1ZB874 - ZB876 1ZB890 1ZB953 1ZB990 - ZB991 1ZB997 1ZC001 - ZC020 1ZC022 1ZC101 - ZC106 1ZC116 - ZC118 1ZC131 1ZC165 1ZD001 - ZD008 1ZD029 - ZD031 GroupVariable Number 1ZD038 1ZE003 - ZE010 1ZE013 - ZE014 1ZE016 - ZE017 1ZE075 1ZE085 - ZE086 1ZE090 - ZE091 1ZE095 - ZE096 1ZE100 1ZE112 1ZE115 1ZE150 1ZE195 - ZE198 1ZE235 1ZE239 - ZE240 1ZE270 - ZE273 1ZE310 - ZE314 1ZE375 1ZE380 - ZE381 1ZE425 - ZE428 1ZE435 - ZE438 1ZE481 1ZE486 - ZE488 1ZE581 1ZE586 1ZE602 1ZE671

2. Spares Affected B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 4 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

Examine your spares supply for the parts identified below. If any parts are found, refer to Accomplishment Instructions - Step 2., Work Instructions for the recommended action.

Table 3 Part Numbers 725Z3030, 725Z3040, 725Z3050, and 725Z3060.

B. CONCURRENT REQUIREMENTS None.

C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB780041-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB780041-00 RB mandatory.

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.

Accomplish the required actions, based on the applicable conditions in the below tables in accordance with Accomplishment Instructions.

Group 1, Configuration 1:

Table 5 ENGINE 1 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER

FIRE SEAL AND THERMAL BLANKET - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 2,200 Flight Hours after the Issue 001 date of Requirements Bulletin B787-81205- SB780041-00 RB Do a General Visual Inspection of the IFS forward upper fire seal and thermal blanket for damage. *[1]*[2] All Airplanes with any Rolls-Royce Trent 1000 Engine Thrust Reverser 2,200 Flight Hours-Repeat General Visual Inspection of the IFS forward upper fire seal for damage.

*[1] CONDITION 1: NO IFS

FORWARD UPPER FIRE

SEAL DAMAGE FOUND *[1] B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 5 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

Group 1, Configuration 1:

Table 5 ENGINE 1 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER

FIRE SEAL AND THERMAL BLANKET - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Before Further Flight CONDITION 2 (ACTION

1): Replace damaged IFS forward upper fire seal PN 725Z3171-127 with new IFS forward upper fire seal PN 725Z3171-151.

CONDITION 2: ANY DAM-

AGE FOUND ON IFS

FORWARD UPPER FIRE SEAL PN 725Z3171-127 *[1] 2,200 Flight Hours-CONDITION 2 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper fire seal for damage. *[1] -Before Further Flight CONDITION 3 (ACTION

1): Replace damaged IFS forward upper fire seal PN 725Z3171-151 with new IFS forward upper fire seal PN 725Z3171-151.

CONDITION 3: ANY DAM-

AGE FOUND ON IFS

FORWARD UPPER FIRE SEAL PN 725Z3171-151 *[1] 2,200 Flight Hours-CONDITION 3 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper fire seal for damage. *[1] 2,200 Flight Hours-Repeat General Visual Inspection of the IFS forward upper thermal blanket for damage. *[2] CONDITION 4: NO IFS

FORWARD UPPER

THERMAL BLANKET DAMAGE FOUND *[2] -Before Further Flight CONDITION 5 (ACTION

1): Replace any damaged IFS forward upper thermal blanket.

CONDITION 5: ANY IFS

FORWARD UPPER

THERMAL BLANKET DAMAGE FOUND *[2] 2,200 Flight Hours-CONDITION 5 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper thermal blanket for damage. *[2] *[1] IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.

*[2] IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and overtemperature conditions shown by discoloration or scorching.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 6 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

Group 1, Configuration 1:

Table 6 ENGINE 1 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER

FIRE SEAL AND THERMAL BLANKET - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 2,200 Flight Hours after the Issue 001 date of Requirements Bulletin B787-81205- SB780041-00 RB Do a General Visual Inspection of the IFS forward upper fire seal and thermal blanket for damage. *[1]*[2] All Airplanes with any Rolls-Royce Trent 1000 Engine Thrust Reverser 2,200 Flight Hours-Repeat General Visual Inspection of the IFS forward upper fire seal for damage.

*[1] CONDITION 6: NO IFS

FORWARD UPPER FIRE

SEAL DAMAGE FOUND *[1] -Before Further Flight CONDITION 7 (ACTION

1): Replace damaged IFS forward upper fire seal PN 725Z3171-128 with new IFS forward upper fire seal PN 725Z3171-152.

CONDITION 7: ANY DAM-

AGE FOUND ON IFS

FORWARD UPPER FIRE SEAL PN 725Z3171-128 *[1] 2,200 Flight Hours-CONDITION 7 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper fire seal for damage. *[1] -Before Further Flight CONDITION 8 (ACTION

1): Replace damaged IFS forward upper fire seal PN 725Z3171-152 with new IFS forward upper fire seal PN 725Z3171-152.

CONDITION 8: ANY DAM-

AGE FOUND ON IFS

FORWARD UPPER FIRE SEAL PN 725Z3171-152 *[1] 2,200 Flight Hours-CONDITION 8 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper fire seal for damage. *[1] 2,200 Flight Hours-Repeat General Visual Inspection of the IFS forward upper thermal blanket for damage. *[2] CONDITION 9: NO IFS

FORWARD UPPER

THERMAL BLANKET DAMAGE FOUND *[2] B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 7 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

Group 1, Configuration 1:

Table 6 ENGINE 1 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER

FIRE SEAL AND THERMAL BLANKET - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Before Further Flight CONDITION 10 (ACTION

1): Replace any damaged IFS forward upper thermal blanket.

CONDITION 10: ANY IFS

FORWARD UPPER

THERMAL BLANKET DAMAGE FOUND *[2] 2,200 Flight Hours-CONDITION 10 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper thermal blanket for damage. *[2] *[1] IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.

*[2] IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and overtemperature conditions shown by discoloration or scorching.

Group 1, Configuration 1:

Table 7 ENGINE 2 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER

FIRE SEAL AND THERMAL BLANKET - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 2,200 Flight Hours after the Issue 001 date of Requirements Bulletin B787-81205- SB780041-00 RB Do a General Visual Inspection of the IFS forward upper fire seal and thermal blanket for damage. *[1]*[2] All Airplanes with any Rolls-Royce Trent 1000 Engine Thrust Reverser 2,200 Flight Hours-Repeat General Visual Inspection of the IFS forward upper fire seal for damage.

*[1] CONDITION 11: NO IFS

FORWARD UPPER FIRE

SEAL DAMAGE FOUND *[1] -Before Further Flight CONDITION 12 (ACTION

1): Replace damaged IFS forward upper fire seal PN 725Z3171-127 with new IFS forward upper fire seal PN 725Z3171-151.

CONDITION 12: ANY

DAMAGE FOUND ON IFS

FORWARD UPPER FIRE SEAL PN 725Z3171-127 *[1] 2,200 Flight Hours-CONDITION 12 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper fire seal for damage. *[1] B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 8 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

Group 1, Configuration 1:

Table 7 ENGINE 2 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER

FIRE SEAL AND THERMAL BLANKET - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Before Further Flight CONDITION 13 (ACTION

1): Replace damaged IFS forward upper fire seal PN 725Z3171-151 with new IFS forward upper fire seal PN 725Z3171-151.

CONDITION 13: ANY

DAMAGE FOUND ON IFS

FORWARD UPPER FIRE SEAL PN 725Z3171-151 *[1] 2,200 Flight Hours-CONDITION 13 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper fire seal for damage. *[1] 2,200 Flight Hours-Repeat General Visual Inspection of the IFS forward upper thermal blanket for damage. *[2] CONDITION 14: NO IFS

FORWARD UPPER

THERMAL BLANKET DAMAGE FOUND *[2] -Before Further Flight CONDITION 15 (ACTION

1): Replace any damaged IFS forward upper thermal blanket.

CONDITION 15: ANY IFS

FORWARD UPPER

THERMAL BLANKET DAMAGE FOUND *[2] 2,200 Flight Hours-CONDITION 15 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper thermal blanket for damage. *[2] *[1] IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.

*[2] IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and overtemperature conditions shown by discoloration or scorching.

Group 1, Configuration 1:

Table 8 ENGINE 2 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER

FIRE SEAL AND THERMAL BLANKET - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 2,200 Flight Hours after the Issue 001 date of Requirements Bulletin B787-81205- SB780041-00 RB Do a General Visual Inspection of the IFS forward upper fire seal and thermal blanket for damage. *[1]*[2] All Airplanes with any Rolls-Royce Trent 1000 Engine Thrust Reverser B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 9 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

Group 1, Configuration 1:

Table 8 ENGINE 2 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER

FIRE SEAL AND THERMAL BLANKET - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition 2,200 Flight Hours-Repeat General Visual Inspection of the IFS forward upper fire seal for damage.

*[1] CONDITION 16: NO IFS

FORWARD UPPER FIRE

SEAL DAMAGE FOUND *[1] -Before Further Flight CONDITION 17 (ACTION

1): Replace damaged IFS forward upper fire seal PN 725Z3171-128 with new IFS forward upper fire seal PN 725Z3171-152.

CONDITION 17: ANY

DAMAGE FOUND ON IFS

FORWARD UPPER FIRE SEAL PN 725Z3171-128 *[1] 2,200 Flight Hours-CONDITION 17 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper fire seal for damage. *[1] -Before Further Flight CONDITION 18 (ACTION

1): Replace damaged IFS forward upper fire seal PN 725Z3171-152 with new IFS forward upper fire seal PN 725Z3171-152.

CONDITION 18: ANY

DAMAGE FOUND ON IFS

FORWARD UPPER FIRE SEAL PN 725Z3171-152 *[1] 2,200 Flight Hours-CONDITION 18 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper fire seal for damage. *[1] 2,200 Flight Hours-Repeat General Visual Inspection of the IFS forward upper thermal blanket for damage. *[2] CONDITION 19: NO IFS

FORWARD UPPER

THERMAL BLANKET DAMAGE FOUND *[2] B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 10 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

Group 1, Configuration 1:

Table 8 ENGINE 2 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER

FIRE SEAL AND THERMAL BLANKET - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Before Further Flight CONDITION 20 (ACTION

1): Replace any damaged IFS forward upper thermal blanket.

CONDITION 20: ANY IFS

FORWARD UPPER

THERMAL BLANKET DAMAGE FOUND *[2] 2,200 Flight Hours-CONDITION 20 (ACTION

2): Repeat General Visual Inspection of the IFS forward upper thermal blanket for damage. *[2] *[1] IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.

*[2] IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and overtemperature conditions shown by discoloration or scorching.

Group 1, Configuration 2:

No Action Required.

D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 11 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN

E. ACCOMPLISHMENT INSTRUCTIONS

1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC;

this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.

2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.

3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.

4. The compliance times for the actions in Work Instructions are in Compliance.

5. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.

6. The CONDITIONS and ACTIONS shown apply to each thrust reverser independently.

7. A General Visual Inspection is defined as: A visual examination of an interior or exterior area, installation or assembly to detect obvious damage, failure or irregularity. This level of inspection is made from within touching distance unless otherwise specified. A mirror may be necessary to ensure visual access to all surfaces in the inspection area. This level of inspection is made under normal available lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may require removal or opening of access panels or doors. Stands, ladders or platforms may be required to gain proximity to the area being checked.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020 Page 12 of 24 EXPORT CONTROLLED ECCN: 9E991 See title page for details.

B787-81205-SB780041-00 RB Issue 001, 31 Mar 2020

REQUIREMENTS BULLETIN