TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a3763420a40cc7cb3ff4762b1824a1e545fdda0d472971838c569e764e17428d' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a3763420a40cc7cb3ff4762b1824a1e545fdda0d472971838c569e764e17428d' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
(2) Replace existing local repairs with new local repairs in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(3) For repairs 12 inches or shorter, do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(4) For repairs longer than 12 inches, do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(5) Do full length repair with finger doublers in accordance with Service Rework Drawing SR08530032-7001 (left side) or SR08530032-7003 (right side) in accordance with Paragraph 1.E., Compliance.
(6) Do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Option 2
(1) Do repetitive inspections of accessible skin in accordance with Paragraph 1.E., Compliance.
(2) Replace existing local repairs with new local repairs in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(3) For repairs 12 inches or shorter, do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(4) For repairs longer than 12 inches, do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(5) Do full length repair in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(6) Do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Option 3
(1) Replace existing local repairs with full length repair with finger doublers in accordance with Service Rework Drawing SR08530032-7001 (left side) or SR08530032-7003 (right side) in accordance with Paragraph 1.E., Compliance.
(2) Do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 73 of 86 BOEING SERVICE BULLETIN DC8-53A080
ALERTALERT
Option 4
(1) Replace existing local repairs with full length repair in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(2) Do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
b. Condition 2 (Any Failed Fastener(s)) Option 1
(1) Replace failed fasteners.
(2) Do repetitive inspections of accessible skin in accordance with Paragraph 1.E., Compliance.
(3) Replace existing local repairs with new local repairs in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(4) For repairs 12 inches or shorter, do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(5) For repairs longer than 12 inches, do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(6) Do full length repair with finger doublers in accordance with Service Rework Drawing SR08530032-7001 (left side) or SR08530032-7003 (right side) in accordance with Paragraph 1.E., Compliance.
(7) Do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Option 2
(1) Replace failed fasteners.
(2) Do repetitive inspections of accessible skin in accordance with Paragraph 1.E., Compliance.
(3) Replace existing local repairs with new local repairs in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(4) For repairs 12 inches or shorter, do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 74 of 86 BOEING SERVICE BULLETIN DC8-53A080
ALERTALERT
(5) For repairs longer than 12 inches, do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(6) Replace existing local repairs with full length repair in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(7) Do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Option 3
(1) Replace existing local repairs with full length repair with finger doublers in accordance with Service Rework Drawing SR08530032-7001 (left side) or SR08530032-7003 (right side) in accordance with Paragraph 1.E., Compliance.
(2) Do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Option 4
(1) Replace existing local repairs with full length repair in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(2) Do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
c. Condition 3 (Any Crack(s) Found in Skin) Option 1
(1) Repair cracked skin locally in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side)
(2) Do repetitive inspections of accessible skin in accordance with Paragraph 1.E., Compliance.
(3) Replace existing local repairs with new local repairs in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(4) For repairs 12 inches or shorter, do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(5) For repairs longer than 12 inches, do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 75 of 86 BOEING SERVICE BULLETIN DC8-53A080
ALERTALERT
(6) Replace existing local repairs with full length repair with finger doublers in accordance with Service Rework Drawing SR08530032-7001 (left side) or SR08530032-7003 (right side) in accordance with Paragraph 1.E., Compliance.
(7) Do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Option 2
(1) Repair cracked skin locally in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side)
(2) Do repetitive inspections of accessible skin in accordance with Paragraph 1.E., Compliance.
(3) Replace existing local repairs with new local repairs in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(4) For repairs 12 inches or shorter, do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(5) For repairs longer than 12 inches, do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
(6) Replace existing local repairs with full length repair in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(7) Do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Option 3
(1) Repair cracked skin and replace existing local repairs with full length repair with finger doublers in accordance with Service Rework Drawing SR08530032-7001 (left side) or SR08530032-7003 (right side) in accordance with Paragraph 1.E., Compliance.
(2) Do an external visual inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Option 4
(1) Repair cracked skin and replace existing local repairs with full length repair in accordance with Service Rework Drawing SR08530032-7005 (left side) or SR08530032-7007 (right side) in accordance with Paragraph 1.E., Compliance.
(2) Do an external Low Frequency Eddy Current inspection for cracks along all four edges of the external doublers, left and right sides in accordance with Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 76 of 86 BOEING SERVICE BULLETIN DC8-53A080
ALERTALERT
4. Record results of inspection, include the factory serial number of affected aircraft, flight hours, and accumulated landings. Forward results to:
Boeing Commercial Airplanes Manager Structures/Payloads Technical and Fleet Support Service Engineering/Commercial Aviation Services 3855 Lakewood Boulevard Long Beach, California 90846
5. Lower airplane and remove shoring equipment if applicable.
6. Close access doors.
7. Put the airplane back in serviceable condition.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 77 of 86 BOEING SERVICE BULLETIN DC8-53A080
ALERTALERT
BOEING SERVICE BULLETIN DC8-53A080
ALERT ALERT RIVET (11 PLACES) NOTE: MATCH DRILL ALL HOLES
FOR ALIGNMENT
- 1 ASSY 2218494 FIGURE 1: METHOD 103 REFLECTANCE TYPE SLIDING PROBE PROCEDURE REFERENCE STANDARD (SHEET 1 OF 2) Original Issue: June 22, 2004 Revision 2 September 18, 2013 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished DC8-53A080 Work - See page 1 for details. 78 of 86
BOEING SERVICE BULLETIN DC8-53A080
ALERT ALERT
- 2.0 - DRILL NO. 20 HOLE COUNTERSINK 0.226/0.236 X 100 DEG (11 PLACES)
1.75 0.5 I.O
0.375 - - 0.625 • 0.050 (TYP) (10 PLACES)
7.0 -3 DETAIL NOTES:
1. MATERIAL 2024-T3 OR 7075-T6 ALUMINUM
2. MATCH DRILL ALL HOLES WITH EDM NOTCH - 0.125 -5 DETAIL FOR ALIGNMENT
3. EDM NOTCH - MAX WIDTH - 0.010 INCH
4. DIMENSIONS ARE IN INCHES
5. SCALE - NONE A-A DRILL NO. 20 HOLE (11 PLACES)
0.5
0.375 - - 0.625 (10 PLACES) →0.063 (TYP)
• 7.0 -5 DETAIL MATERIAL 2024-73 OR 7075. 76 ALUMINUM
2. MATCH DRILL ALL HOLES WITH -3 DETAIL FOR ALIGNMENT
3. DIMENSIONS ARE IN INCHES
4. SCALE - NONE 2218496 FIGURE 1: METHOD 103 REFLECTANCE TYPE SLIDING PROBE PROCEDURE REFERENCE STANDARD (SHEET 2 OF 2) Original Issue: June 22, 2004 Revision 2 September 18, 2013 PROPRIETARY - Copyright © Unpublishec Export Controlled ECCN: 9E991 - BOEING DC8-53A080 Work - See page 1 for details. 79 of 86
BOEING SERVICE BULLETIN DC8-53A080
ALERT ALERT STA Y=1490.000 (SERIES 50, 50F) STA Y=1530.000 (SERIES 62, 62F, 72, 72F) STA Y=1690.000 (SERIES 61, 61F, 63, 63F, 71, 71F, 73, 73F) STA Y=1566.000 (SERIES 50, 50F) STA Y=1606.000 (SERIES 62, 62F, 72, 72F) STA Y=1766.000 (SERIES 61, 61F, 63, 63F, 71, 71F, 73, 73F) SEE A $ (102)
FUSELAGE
TYPICAL CRACKS SKIN LONGERON 28
CENTERLINE
INTERNAL
DOUBLER UP FUSELAGE SKIN
SCAN FUSELAGE SKIN AT ALL FOUR
FASTENER ROWS IN THE SHADED AREA
LEFT SIDE SHOWN
RIGHT SIDE OPPOSITE LOOKING INBOARD 2218485 FIGURE 2: HIGH FREQUENCY EDDY CURRENT INSPECTION OF SKIN ALONG LONGERON 28 (SHEET 1 OF 1) Original Issue: June 22, 2004 Revision 2 September 18, 2013 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished DC8-53A080 Work - See page 1 for details. 80 of 86
BOEING SERVICE BULLETIN DC8-53A080
ALERT ALERT -3 DETAIL
REFLECTANCE PROBE ø -5 DETAIL
(103)
PLACE PROBE HERE
FOR CALIBRATION
EDM NOTCH
LIFT-OFF IN SKIN (-3 DETAIL) INSTRUMENT -NDT-19 PROBE -SPO 2210 FREQUENCY -35 kHz NORMAL FASTENER HOLE GAIN HORIZ. -70.1 db (3/16 INCH RIVET) GAIN VERT. -58.1 db REFERENCE STANDARD) (NOT PRESENT ON PROBE DRIVE ROTATION -MID -245 NORMAL FASTENER HOLE NOTE:
(5/32 INCH RIVET) SETTINGS LISTED WERE USED TO DEVELOP PROCEDURE.
VALUES MAY VARY FROM INSTRUMENT TO INSTRUMENT.
NULL/BALANCE POINT
BETWEEN FASTENERS 2218486 FIGURE 3: METHOD 103 REFLECTANCE TYPE SLIDING PROBE PROCEDURE (SHEET 1 OF 1) Original Issue: June 22, 2004 Revision 2 September 18, 2013 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING DC8-53A080 Work - See page 1 for details. 81 of 86
BOEING SERVICE BULLETIN DC8-53A080
ALERT ALERT STA Y=1490.000 (SERIES 50, 50F) STA Y=1530.000 (SERIES 62, 62F, 72, 72F) STA Y=1690.000 (SERIES 61, 61F, 63, 63F, 71, 71F, 73, 73F) STA Y=1566.000 (SERIES 50, 50F) STA Y=1606.000 (SERIES 62, 62F, 72, 72F) STA Y=1766.000 (SERIES 61, 61F, 63, 63F, 71, 71F, 73, 73F) SEE A $ (103)
REFLECTANCE FUSELAGE
PROBE NONCONDUCTIVE SKIN
STRAIGHTEDGE LONGERON 28
CENTERLINE UP
INTERNAL DOUBLER FWD - FUSELAGE SKIN
SCAN FORWARD AND AFT WITH PROBE
CENTERED ON FASTENER ROW
LEFT SIDE SHOWN
RIGHT SIDE OPPOSITE LOOKING INBOARD 2218490 FIGURE 4: METHOD 103 REFLECTANCE TYPE SLIDING PROBE PROCEDURE (SHEET 1 OF 1) Original Issue: June 22, 2004 Revision 2 September 18, 2013 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished DC8-53A080 Work - See page 1 for details. 82 of 86
Model Affected: DC-8 Drawing Reference: 5649328, 5649329 Requirement:
TO COMPLETE THE REQUIREMENTS OF THIS INSPECTION,THE PRIMARY INSPECTION (01), OF EACH INSPECTION SEQUENCE, OR ITS ALTERNATE SUBSTITUTE(S) MUST BE ACCOMPLISHED.
NOTE:
1. ALTERNATE INSPECTIONS WILL BE IDENTIFIED BY NUMERALS OTHER THAN 01.
2. MULTIPLE ALTERNATE INSPECTIONS WHICH MUST BE PERFORMED TO ADEQUATELY REPLACE
A PRIMARY INSPECTION WILL BE IDENTIFIED BY AN ALPHA CHARACTER FOLLOWING THE ALTERNATE DESIGNATOR, i.e., 02a AND 02b, ETC.
3. INSPECTIONS ARE TYPICALLY IDENTIFIED WITH THE FIRST DIGIT REPRESENTING THE INSPECTION SEQUENCE NUMBER. THE FOLLOWING DIGITS REPRESENT THE INSPECTION METHOD.
Inspection Sequence 1:
01. Eddy Current, High Frequency - Magneto-Optic/Eddy Current Imager
02. Eddy Current, High Frequency - Surface Probe
03. Eddy Current, High Frequency - Sliding Probe Description:
The inspection area consists of the fuselage skin panels 5649328 (upper panels, left and right sides) and 5649329 (lower panel) at the longitudinal skin splice along Longeron 28 from Fuselage Stations 1490 to 1566 (for basic model, see Figure 1 for other models). Inspect the upper panels at the two fastener rows common with Longeron
28. Inspect the lower panel at the fastener row in common with Longeron 28 and -11 doubler (upper row) and the lower row in common with the -11 doubler only. The purpose of these inspections is to detect fatigue cracks initiating at the fastener hole and propagating in the forward/aft direction. See Figure 1.
Access:
FOLLOW APPLICABLE SAFETY INSTRUCTIONS AND PRECAUTIONS PER THE NONDESTRUCTIVE TESTING STANDARD PRACTICE MANUAL (NDTSPM) PARTS 01-00-01 AND 06-00-01 AS WELL AS ALL LOCAL AND COMPANY REQUIREMENTS.
Preparation for Inspection:
A. Remove all dirt, grease, and loose paint from the inspection area.
B. Thoroughly clean the inspection area with an approved cleaning agent.
Appendix A:
(SHEET 1 OF 4) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 22, 2004 DC8-53A080Revision 2 September 18, 2013 83 of 86 BOEING SERVICE BULLETIN DC8-53A080
ALERTALERT
General Visual Inspection:A. Perform a preliminary check of the general inspection area for cleanliness, presence of foreign objects, distortion, damage, cracks, corrosion, security of parts and evidence of loose attachments.
B. If additional information regarding visual inspection is desired, See Part 09 of the Nondestructive Testing Standard Practice Manual (NDTSPM.)
Equipment/Materials
SEQUENCE AP-
PLICABILITY
DESCRIPTION
EDDY CURRENTA 102 103Olympus NDT NE, Incorporated Flaw Detector (Impedance Plane Display).
NORTEC NDT 24 1 101PRI Instrumentation.Magneto-optic/Eddy Current Imager (MOI).Model 301 2 103Olympus NDT NE, Incorporated Reflectance Type Sliding Probe operating at 35 kHz.SPO-2210 3 103Fabrication source optional.High Frequency Reference Standard (sliding probe procedure). See Figure 4 and Figure 5 for fabrication details. See Note 3 below.
SURFACE PREPARATIONB ALLSource optional.Cleaning Agent in conformance with environmental regulations and harmless to surfaces contacted.
1 NOTE: The equipment/materials listed above were used to develop this procedure. See NDTSPM Part 06-00-04 for supplier/ vendor information
1.
2. Equipment/material substitutions producing results equivalent to those defined by this document may also be used. See NDTSPM Parts 01-00-03 and 06-00-03 for equipment/material information.
3. The High Frequency Reference Standard for sliding probe procedure is the same as the DC-9 Supplemental Inspection Document (SID) 9RS11 standard. Reference DC-9 SID, Volume II, Reference Standard Supplement, Pages 36 and 37 for fabrication. MD-80 SID, Volume II, Section 2-1, Figure 15 may also be referenced for fabrication of the 9RS11. The 9RS11 standard may be substituted for the sliding probe procedure standard.
Inspection Procedure A. Inspection Sequence 1:
1. Inspection Method 01 (Eddy Current, High Frequency, MOI) Appendix A:
(SHEET 2 OF 4) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 22, 2004 DC8-53A080Revision 2 September 18, 2013 84 of 86 BOEING SERVICE BULLETIN DC8-53A080