Copy · SB-737-25-1707-02-- · 87 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0504; AD 2021-26-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'a7f5f6ff30d2575e6890ce6ac5bf4423a16f90da614181344d049a63077e7393'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-25-1707 Original Issue: September 24, 2015 Revision 2: July 27, 2020 ATA System: 2523 SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Service Units - Passenger Service Unit (PSU) and Life Vest Panel Modification Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

Copyright © 2015 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 1 of 87

2.0

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 2 of 87 BOEING SERVICE BULLETIN 737-25-1707

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary9

1. PLANNING INFORMATION13

A. Effectivity13

1. Airplanes13

2. Spares Affected20

B. Concurrent Requirements20

C. Reason20

D. Description21

E. Compliance25

F. Approval25

G. Manpower26

H. Weight and Balance Changes30

I. Electrical Load Data30

J. References30

1. Existing Data:30

2. Data Supplied with this Service Bulletin:31

3. Installation Drawings Used in the Preparation of this Service Bulletin:31

K. Publications Affected31

L. Interchangeability and Intermixability of Parts31

M. Software Accomplishment Summary31

2. MATERIAL INFORMATION33

A. Material - Price and Availability33

B. Industry Support Information38

C. Parts Necessary for Each Airplane38

1. Kits/Parts38

2. Parts and Materials Supplied by the Operator40

3. Parts Modified and Reidentified41

4. Parts Removed and Not Replaced42

D. Parts Necessary to Change Spares42

E. Special Tooling - Price and Availability42

F. Special Tooling Necessary to do this Service Bulletin43

3. ACCOMPLISHMENT INSTRUCTIONS45

A. GENERAL INFORMATION45

B. WORK INSTRUCTIONS46

FIGURE 1: PASSENGER SERVICE UNIT, LANYARD ASSEMBLIES - ADDITION AND REPLACEMENT

[Group 1-2, 5, 7-8, Configuration 1]49

FIGURE 2: LIFE VEST PANEL, LANYARD ASSEMBLIES - ADDITION AND REPLACEMENT [Group 2,

Configuration 1; Group 5; Group 8, Configuration 1]54

FIGURE 3: PASSENGER SERVICE UNIT - LANYARD ASSEMBLY MEASUREMENT [Group 1-2, Configuration 2; Group 3-4, Configuration 1; Group 5, Configuration 2; Group 6, Configuration

1; Group 7-8, Configuration 2; Group 9, Configuration 1]60

FIGURE 4: LIFE VEST PANEL - LANYARD ASSEMBLY MEASUREMENT [Group 2, Configuration 2; Group

4, Configuration 1; Group 8, Configuration 2; Group 9]62

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 3 of 87 BOEING SERVICE BULLETIN 737-25-1707

FIGURE 5: PASSENGER SERVICE UNIT - IDENTIFICATION [Group 1-2, Configuration 2; Group 3-4, Configuration 1; Group 5, Configuration 2; Group 6, Configuration 1; Group 7-8, Configuration

2; Group 9, Configuration 1]64

FIGURE 6: PASSENGER SERVICE UNIT - LANYARD ASSEMBLY REPLACEMENT [Group 1-2, Configuration 2; Group 3-4, Configuration 1; Group 5, Configuration 2; Group 6, Configuration

1; Group 7-8, Configuration 2; Group 9, Configuration 1]66

FIGURE 7: LIFE VEST PANEL - IDENTIFICATION [Group 2, Configuration 2; Group 4, Configuration 1;

Group 8, Configuration 2; Group 9]69

FIGURE 8: LIFE VEST PANEL - LANYARD ASSEMBLY REPLACEMENT [Group 2, Configuration 2; Group

4, Configuration 1; Group 8, Configuration 2; Group 9]71

FIGURE 9: PASSENGER SERVICE UNIT - PART NUMBER INSPECTION AND REIDENTIFICATION

[Group 7, Configuration 2-3; Group 8, Configuration 2-3]74

APPENDIX A: PASSENGER SERVICE UNIT (PSU) - REIDENTIFICATION76

APPENDIX B: LIFE VEST PANEL - REIDENTIFICATION85

APPENDIX C: PART DEMAND INTENT86

APPENDIX D: KITS 002A0002-451 AND 002A0002-452 - CHECK87

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 4 of 87 BOEING SERVICE BULLETIN 737-25-1707

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 737-25-1707Original Issue: September 24, 2015 Revision 2: July 27, 2020 ATA System: 2523 SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Service Units - Passenger Service Unit (PSU) and Life Vest Panel Modification This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Airworthiness Directive AD 2019-03-26 is related to this service bulletin.

Airplane variable numbers YG701, YG711, YM591 thru YM593 and YM594 thru YM599 were added to Group 1 of this service bulletin effectivity.

Airplane variable numbers YA811 thru YA814 were moved from Group 1 to new Group 5 of this service bulletin effectivity.

Airplane variable numbers YG515 thru YG517, YG721, YG722 and YK478 were added to Group 3 of this service bulletin effectivity.

Airplane variable numbers YF671 thru YF674, YF676 thru YF685, YF691, YF693 thru YF695, YQ519 and YQ520 were moved from Group 3 to new Group 9 of this service bulletin effectivity.

Airplane variable numbers YF669 and YF670, YF675, YF692, YQ356 thru YQ363, YQ364, YQ365 and YQ516 thru YQ518 were added to Group 4 of this service bulletin effectivity.

Airplane variable numbers YQ351 thru YQ355 and YQ371 were moved from Group 4 to new Group 6 of this service bulletin effectivity.

Airplane variable numbers YA255, YA256, YA645, YA656, YB884, YB885, YG112, YG113, YK721 thru YK740, YK796, YK797, YL271, YL272, YL301, YL303, YL461 thru YL470, YM571, YM572 and YN071 thru YN078, were moved from Group 1 to new Group 7 of this service bulletin effectivity.

Airplane variable numbers YN091, YN092 and YN121 were moved from Group 2 to new Group 8 of this service bulletin effectivity.

Effects of this Revision on airplanes on which the Original Issue or Revision 1 was previously done:

See Paragraph 1.D., Description for more information.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 5 of 87

REASON FOR REVISION This revision is sent to add and move airplanes to new groups to agree with their Passenger Service Unit (PSU) and Life Vest Panel configurations. This revision is also sent to add reidentification part numbers related to those PSUs that were changed by Boeing Service Bulletin 737-35-1107.

These sections were changed:

1. Summary Background, added reference in planning table.

2. Summary Action, changed applicability, added information for Groups 5, 6, 7, 8 and 9.

3. Summary Compliance, removed Notice of Proposed Rule Making, added Airworthiness Directive information.

4. Summary Illustration, changed applicability, added information for Groups 5, 6, 7, 8 and 9.

5. Paragraph 1.A.1., Airplanes, added and moved airplanes to new groups, changed configuration descriptions, added configurations, added new Groups 5, 6, 7, 8 and 9.

6. Paragraph 1.C., Reason, added Revision 2 information.

7. Paragraph 1.D., Description, changed applicability, added information for Groups 5, 6, 7, 8 and 9, added Revision 2 information, added maintenance zones for Groups 5, 6, 7, 8 and 9.

8. Paragraph 1.E., Compliance, removed Notice of Proposed Rule Making, added Airworthiness Directive information.

9. Paragraph 1.F., Approval, added Alternative Method of Compliance (AMOC) information.

10. Paragraph 1.G., Manpower, changed applicability, added estimates for Groups 5, 6, 7, 8 and 9, corrected and added tasks in applicable tables for 'Part 1 - Airplane Work: Life Vest Panel', changed and added information for 'Part 2 - Component Work: PSU'.

11. Paragraph 1.H., Weight and Balance Changes, changed applicability.

12. Paragraph 1.J.1., Existing Data, removed Notice of Proposed Rule Making, added Airworthiness Directive, added Boeing Service Bulletin reference.

13. Paragraph 1.K., Publications Affected, changed the information.

14. Paragraph 2.A., Material - Price and Availability, changed applicability, changed the information, added information for Group 7 and 8 Configuration 3, changed footnote (b).

15. Paragraph 2.B., Industry Support Information, changed applicability.

16. Paragraph 2.C.1., Kits/Parts, changed applicability.

17. Paragraph 2.C.2., Parts and Materials Supplied by the Operator, changed applicability, added availability information, divided information to show correct parts and materials for PSUs and Life Vest Panels.

18. Paragraph 2.C.3., Parts Modified and Reidentified, added part numbers.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 6 of 87 BOEING SERVICE BULLETIN 737-25-1707

19. Paragraph 2.D., Parts Necessary to Change Spares, added part, changed footnotes to better qualify parts usage.

20. Paragraph 3.B., Work Instructions, changed applicability, added instructions in Part 1 and Part 2.

21. Figure 1, changed applicability, changed step 7, added information, changed illustration locator and detail PSU view.

22. Figure 2, changed applicability, changed step 12, added information, changed illustration locator.

23. Figure 3 and Figure 4, changed applicability, changed illustration locator.

24. Figure 5 and Figure 7, changed applicability, changed step 1, added information, changed illustration locator.

25. Figure 6, changed applicability, changed step 3, added information, changed illustration locator.

26. Figure 8, changed applicability, changed step 6, added information, changed illustration locator.

27. Figure 9, added.

28. Appendix A, added PSU reidentification part numbers.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes, to show the location of all content changes.

Pages with no vertical lines have no changes.

REVISION HISTORY September 24, 2015Original Issue:

May 18, 2018Revision 1:

July 27, 2020Revision 2:

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 7 of 87 BOEING SERVICE BULLETIN 737-25-1707

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 8 of 87 BOEING SERVICE BULLETIN 737-25-1707

BLANK PAGE

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 737-25-1707Original Issue: September 24, 2015 Revision 2: July 27, 2020 ATA System: 2523 SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Service Units - Passenger Service Unit (PSU) and Life Vest Panel Modification BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND This service bulletin gives instructions to add a secondary method of retention to the Life Vest Panels and the Passenger Service Units (PSUs), to prevent them from detachment during an occurrence that is more than emergency load requirements. If this service bulletin is not done, PSUs or Life Vest Panels can become detached when emergency load requirements are exceeded which could lead to passenger injuries and impede passenger and crew egress during evacuation.

In three survivable 737NG hull loss accidents that are thought to have exceeded design loads, PSUs and Life Vest Panels became detached from supporting structure in the airplane. The design of these PSUs and Life Vest Panels meet the applicable emergency load requirements of Federal Aviation Regulation (FAR) 25.561.

However, to enhance the safety of the airplane, Boeing has changed the design to add a secondary retention for these PSUs and Life Vest Panels to prevent detachment and falling into the cabin during a survivable hull loss accident. The design of these existing PSUs and Life Vest Panels have a single lanyard assembly for maintenance purposes on the inboard edge of the panel.

Accomplishment of this service bulletin installs lanyard assemblies for retention support on the PSUs and Life Vest Panels to decrease the risk of injury to passengers and evacuation hindrance during survivable hull loss accidents.

Since the release of the Original Issue of this service bulletin, Boeing has found that the torsion spring of lanyard assembly, part number 417A3003-9, could be manufactured incorrectly. The incorrect manufacture could have resulted in the distance between the hooks of the torsion spring to be less than necessary. A torsion spring in this condition causes it to not engage correctly when it is attached in the PSU rail. Boeing has worked with the supplier who has corrected the problem to subsequently supply correctly manufactured lanyard assemblies. As a solution to the problem where incorrectly manufactured lanyard assemblies could be installed on PSUs and Life Vest Panels changed by this service bulletin at the Original Issue or that got installed on airplanes before delivery, Boeing has included instructions in this service bulletin to make sure those PSUs and Life Vest Panels have correctly manufactured lanyard assemblies.

Boeing Fleet Team Digest (FTD) 737NG FTD 25-14002 is related to this service bulletin.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 9 of 87

Boeing Service Related Problem (SRP) 737NG-SRP-25-0342 is related to this service bulletin.

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedYesSpares Affected Paragraph 1.E., Compliance and Paragraph

1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsYesKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Parts/Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION (PRR 39004) Group 1, 7, Configuration 1:

Lower each PSU. Add and replace lanyard assemblies. Close each PSU.

Group 2, 5, 8, Configuration 1:

Lower each PSU and Life Vest Panel. Add and replace lanyard assemblies. Close each PSU and Life Vest Panel.

Group 1, Configuration 2; Group 3, 6, Configuration 1:

Lower each PSU. Measure the distance between the hooks of the torsion spring of the lanyard assembly. Do corrective actions or identify each lanyard assembly is serviceable. Close each PSU.

Group 2, Configuration 2; Group 4, 9, Configuration 1:

Lower each PSU and Life Vest Panel. Measure the distance between the hooks of the torsion spring of the lanyard assembly. Do corrective actions or identify each lanyard assembly is serviceable. Close each PSU and Life Vest Panel.

Group 9, Configuration 2:

Lower each Life Vest Panel. Measure the distance between the hooks of the torsion spring of the lanyard assembly. Do corrective actions or identify each lanyard assembly is serviceable. Close each Life Vest Panel.

Group 5, Configuration 2:

Lower each PSU. Measure the distance between the hooks of the torsion spring of the lanyard assembly. Do corrective actions or identify each lanyard assembly is serviceable. Close each PSU. Lower each Life Vest Panel. Add and replace lanyard assemblies. Close each Life Vest Panel.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 10 of 87 BOEING SERVICE BULLETIN 737-25-1707

Group 5, Configuration 3:

Lower each Life Vest Panel. Add and replace lanyard assemblies. Close each Life Vest Panel.

Group 7-8, Configuration 2:

Lower each PSU. Inspect each PSU to find if it has the correct reidentification part number, and change the reidentification part number on the PSU(s) if an incorrect one is found. Measure the distance between the hooks of the torsion spring of the lanyard assembly. Do corrective actions or identify each lanyard assembly is serviceable. Close each PSU.

Group 7-8, Configuration 3:

Lower each PSU. Inspect each PSU to find if it has the correct reidentification part number, and change the reidentification part number on the PSU(s) if an incorrect one is found. Close each PSU.

Group 1-2, Configuration 3; Group 3-4, 6, Configuration 2:

No further action required.

EFFECTIVITY 737-600/700/700C/800/900/900ER airplanes without a Boeing Sky Interior (BSI). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).

Refer to Paragraph 1.A.2., Spares Affected, for the list of affected components.

COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2019-03-26 is related to this service bulletin.

The effective date of AD 2019-03-26 is April 8, 2019.

Boeing recommends that the inspection, change and/or repair given in this service bulletin be done within 60 months after the effective date of AD 2019-03-26.

INDUSTRY SUPPORT INFORMATION Refer to Paragraph 2.B., Industry Support Information.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION Boeing Supplied Kits/Parts.

Operator Supplied Parts/Materials.

Refer to Paragraph 2.A., Material - Price and Availability.

Operators are encouraged to complete the survey provided in APPENDIX C of this service bulletin to help Boeing predict the quantity and timing of the Boeing Supplied Kits/Parts.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 24, 2015 737-25-1707Revision 2: July 27, 2020 11 of 87 BOEING SERVICE BULLETIN 737-25-1707

Page 12OCROpen in PDF

BOEING SERVICE BULLETIN 737-25-1707 The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each Passenger Service Unit.

Step Task Name Identification Qty More Data 1 Measure DISTANCE 1 Measure the distance between the hooks of the torsion spring.

FIGURE 3: PASSENGER SERVICE UNIT - LANYARD ASSEMBLY MEASUREMENT (SHEET 2 OF 2) Original Issue: September 24, 2015 Revision 2 July 27, 2020 Export Controlled ECCN: 9E991 737-25-1707 Copyright © Unpublished Work - See page 1 for details. 61 of 87

Pages 13–24 of 87