Copy · U.S. DOT/FAA - SB-737-32-1402-01 · 55 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0690; AD 2014-08-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '3e6f81b6ddbb015721498724c7dd69bcd69c9b1763a73d1696e4ecf3ea5ec7e5'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-32-1402 Original Issue: August 06, 2008 Revision 1: February 07, 2013 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Forward Trunnion Pin Inspection and Replacement.

Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2008 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 1 of 55

7.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 2 of 55 BOEING SERVICE BULLETIN 737-32-1402

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary9

1. PLANNING INFORMATION ........................................ 1 3 A. Effectivity ............................................... 1 3

1. Airplanes ............................................ 1 3

2. Spares Affected ........................................ 2 1 B. Concurrent Requirements ...................................... 2 1 C. Reason ................................................ 2 1 D. Description .............................................. 2 2 E. Compliance .............................................. 2 3 F. Approval ............................................... 2 7 G. Manpower .............................................. 2 7 H. Weight and Balance Changes .................................... 2 9 I. Electrical Load Data ......................................... 2 9 J. References .............................................. 2 9

1. Existing Data: ......................................... 2 9

2. Data Supplied with this Service Bulletin: ........................... 3 0

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 0 K. Publications Affected ........................................ 3 0 L. Interchangeability and Intermixability of Parts ........................... 3 0 M. Software Accomplishment Summary ................................ 3 0

2. MATERIAL INFORMATION ........................................ 3 1 A. Material - Price and Availability ................................... 3 1 B. Industry Support Information .................................... 3 2 C. Parts Necessary for Each Airplane ................................. 3 2

1. Kits/Parts: ........................................... 3 2

2. Parts and Materials Supplied by the Operator: ........................ 3 3

3. Parts Modified and Reidentified: ............................... 3 4

4. Parts Removed and Not Replaced: .............................. 3 4 D. Parts Necessary to Change Spares ................................. 3 4 E. Special Tooling - Price and Availability ............................... 3 4 F. Special Tooling Necessary to do this Service Bulletin ....................... 3 4

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 5 A. GENERAL INFORMATION ..................................... 3 5 B. WORK INSTRUCTIONS ....................................... 3 6 FIGURE 1: LEFT MLG FORWARD TRUNNION PIN TRANSITION RADIUS - INSPECTION ..... 4 2 FIGURE 2: RIGHT MLG FORWARD TRUNNION PIN TRANSITION RADIUS - INSPECTION ..... 4 4 FIGURE 3: LEFT MLG FORWARD TRUNNION PIN - PROTECTIVE FINISH APPLICATION ..... 4 6 FIGURE 4: RIGHT MLG FORWARD TRUNNION PIN - PROTECTIVE FINISH APPLICATION .... 4 9 FIGURE 5: FORWARD TRUNNION PIN LUBRICATION - LEFT MLG .................. 5 2 FIGURE 6: FORWARD TRUNNION PIN LUBRICATION - RIGHT MLG ................. 5 4 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 3 of 55 BOEING SERVICE BULLETIN 737-32-1402

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 4 of 55 BOEING SERVICE BULLETIN 737-32-1402

BLANK PAGE

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 737-32-1402Original Issue: August 06, 2008 Revision 1: February 07, 2013 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Forward Trunnion Pin Inspection and Replacement.

This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Airworthiness Directive AD 2009-24-07 is related to this service bulletin.

No more work is necessary on the airplane(s) changed in accordance with the Original Issue of this service bulletin.

737-600/700/800/900 airplanes, but not 737-700/700C/800 airplanes with a Boeing Business Jet (BBJ) configuration, from Line Number 1423 to 1787 and from Line Number 2091 to 3526, are added to Group 1 of this service bulletin effectivity. These airplanes must start and continue repeat lubrication applications for the forward trunnion pin and do a detailed inspection of the trunnion pin transition radius, of the left and right Main Landing Gear (MLG).

737-700/700C/800 airplanes with a Boeing Business Jet configuration (BBJ) variable numbers YD412, YD415 thru YD417, YG091 thru YG093, YG103, YG104, YG111 thru YG114, YG116 thru YG128 and YG701 are added to Group 2. These airplanes must start and continue repeat lubrication applications for the forward trunnion pin and do a detailed inspection of the trunnion pin transition radius, of the left and right Main Landing Gear (MLG).

Airplanes variable numbers YG101 and YG102 are moved from Group 1 to Group 2 of this service bulletin effectivity.

REASON FOR REVISION This revision is sent to increase the service bulletin effectivity to a larger range of airplanes because of reports of corrosion protection damage to the forward trunnion pin on 737 airplanes outside the original service bulletin effectivity. Airplanes line numbers 1423 thru 1787 and 2091 thru 3526 have therefore been added to Group 1 and Group 2 of the service bulletin effectivity where applicable. From line number 3527 and above a new trunnion pin seal and seal retainer were installed that are less likely to allow damage in this area. Also, a requirement was added to production drawings to do a visual inspection of the protective coating of the forward trunnion pin transition radius, after the MLG is installed. Airplane variable numbers YG101 and YG102 are moved to Group 2, because they were not correctly identified as BBJ before. Material Information and Accomplishment Instructions are changed to show trunnion pin, P/N 161A1188-3, as fully interchangeable with P/N 161A1188-9, also trunnion pins, P/N 161A1188-17, -19, -21 and -23 are added with their related part substitutions. Appendix A and B and related operator inspection report instructions are removed.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 5 of 55

Terminology has been changed in the Work Instructions to agree with the terminology defined in Paragraph

3.A., General Information - Notes.

These sections are changed:

1. In Summary, Background: Added Boeing Service Related Problem, Boeing Fleet Team Digest, Boeing Service Letter and related Boeing Service Bulletin references. Updated second paragraph.

2. In Summary, Action: Removed inspection report.

3. In Summary, Effectivity: Updated airplane models and statement.

4. In Summary, Compliance: Added FAA AD 2009-24-07.

5. In Paragraph 1.A., Effectivity: Updated airplane models and Group Configuration Table. Added airplanes line numbers 1423 thru 1787 and 2091 thru 3526, as applicable, to effectivity list. Moved airplanes variable numbers YG101 and YG102 from Group 1 to Group 2.

6. In Paragraph 1.C., Reason: Added Boeing Service Related Problem, Boeing Fleet Team Digest and Boeing Service Letter references. Updated second paragraph.

7. In Paragraph 1.D., Description: Removed inspection report. Updated airplane models in maintenance zone table.

8. In Paragraph 1.E., Compliance: Added FAA AD 2009-24-07 and note. Updated compliance times for to refer to this AD and added new rows to Table 1 and 2 to cover airplanes not included in the effectivity of the Original Issue of this service bulletin.

9. In Paragraph 1.F., Approval: Added Alternative Method of Compliance (AMOC) statement.

10. In Paragraph 1.G., Manpower: Added footnote (b) and references to the Manpower table for PART I.

Corrected PART IV total.

11. In Paragraph 1.J., References: updated.

12. In Paragraph 1.K., Publications Affected: Added Publications Affected table, with new IPC reference, and note on Damage Tolerance Based Structural Inspections.

13. Added Paragraph 1.M., Software Accomplishment Summary: New service bulletin section - not affected.

14. In Paragraph 2.A., Material - Price and Availability: Changed footnote (b) to show correct part interchangeability. Added P/N's 161A1188-17, -19, -21 and -23 and Footnotes (h) thru (l). Updated prices.

15. In Paragraph 2.B., Industry Support Information: Updated warranty statement.

16. In Paragraph 2.C.1., Kits/Parts: Changed footnote (b) and added optional P/N 161A1188-9 to show correct part interchangeability. Added P/N's 161A1188-17, -19, -21 and -23 and Footnotes (i) thru (n).

17. In Paragraph 2.C.2., Parts and Materials Supplied by the Operator: Corrected Grease Specification and Chromate name. Added equivalent material specifications for Ultrachromate 300. Combined BMS 3-38 and BMS 3-26.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 6 of 55 BOEING SERVICE BULLETIN 737-32-1402

18. In Paragraph 3.A., General Information: General Notes updated.

19. In Paragraph 3.B., Work Instructions, PART I: Corrected Step 2. Added notes to Step 5.c.2. Removed Step 6 for inspection report.

20. In Paragraph 3.B., Work Instructions, PART II: Changed Step 3.b. and added Steps 3.f. thru 3.i. and note to show part interchangeability. Added Steps 5 thru 9.

21. In Paragraph 3.B., Work Instructions, PART III: Updated paragraph structure. Changed part name in Step 4 to agree with Figures 3 and 4. Added Step 7.

22. In Paragraph 3.B., Work Instructions, PART IV: Added Steps 2 thru 4.

23. In Figure 1 Step Table: Added Inspection Description to Step 2. Removed Footnote (a) and reference.

24. In Figure 2 Step Table: Added Inspection Description to Step 2. Removed Footnote (a) and reference.

25. In Figure 3 Step Table: Added equivalent material specifications. Updated quantity definitions.

26. In Figure 4 Step Table: Added equivalent material specifications. Updated quantity definitions.

27. Removed Appendix A and B.

The data given in Information Notices 737-32-1402 IN 01, 737-32-1402 IN 02 is included in this revision.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY August 06, 2008Original Issue:

February 07, 2013Revision 1:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 7 of 55 BOEING SERVICE BULLETIN 737-32-1402

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 8 of 55 BOEING SERVICE BULLETIN 737-32-1402

BLANK PAGE

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 737-32-1402Original Issue: August 06, 2008 Revision 1: February 07, 2013 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Forward Trunnion Pin Inspection and Replacement.

BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND This Service Bulletin gives instructions to inspect the Main Landing Gear (MLG) forward trunnion pins for finish damage or corrosion pitting, and if necessary, to replace them. If this Service Bulletin is not done, the corrosion pitting could cause stress cracking of the forward trunnion pin which could result in a MLG collapse due to fracture of the pin.

MLG forward trunnion pin protective finishes may have been damaged during final assembly. The protective finish could be damaged at the transition radius between the chrome plated outer diameter and the spherical ball bearing surface, because the pin was not handled correctly. The damage of the protective finish puts the base metal at risk from corrosion pitting. After the release of the Original Issue of this service bulletin, Boeing has received a total of four reports of MLG trunnion pin transition radius finish damage on pins installed on airplanes that are before and after the effectivity of the Original Issue of this service bulletin. In each case, the MLG had not been removed since aircraft delivery and the damage is similar to that described in this service bulletin. Thus, at this revision, the effectivity is being increased to include those airplanes omitted previously, between line numbers 1423 and 3526. From line number 3527 and above a new trunnion pin seal and seal retainer were installed that are less likely to allow damage in this area. Also, a requirement was added to production drawings to do a visual inspection of the protective coating of the forward trunnion pin transition radius, after the MLG is installed.

Boeing Service Bulletin 737-32-1376 and 737-32-1448, are related to this service bulletin.

Boeing recommends to do this service bulletin at the same time as Boeing Service Bulletin 737-32-1448, if applicable.

Boeing Service Related Problem (SRP) 737NG-SRP-32-0175 and 737NG-SRP-32-0157 are related to this service bulletin.

Boeing Service Letter 737-SL-32-166 is related to this service bulletin.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 9 of 55

Boeing Fleet Team Digest 737NG FTD 32-11005, 737NG FTD 32-07010 and 737NG FTD 32-09004 are related to this service bulletin.

ACTION Do the lubrication of the MLG Forward Trunnion Pins at the thresholds given in Paragraph 1.E., Compliance, Table 1 or Table 2 as applicable.

Do (in-situ) a detailed inspection of the Forward Trunnion Pin Transition Radius area (with the Main Landing Gear not removed) at the thresholds and repeat intervals given in Paragraph 1.E., Compliance, Table 1 or Table 2 as applicable.

Repair/Overhaul or replace the MLG Forward Trunnion Pin if finish damage or corrosion is found.

EFFECTIVITY 737-600, 737-700, 737-700C, 737-800, 737-900 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).

COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2009-24-07 is related to this service bulletin.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of February 22, 2007. Please refer to Paragraph 2.B., Industry Support Information.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION Boeing Supplied Kits/Parts.

Refer to Paragraph 2.A., Material - Price and Availability.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 10 of 55 BOEING SERVICE BULLETIN 737-32-1402

Page 11OCROpen in PDF

BOEING SERVICE BULLETIN 737-32-1402

FORWARD

TRUNNION PIN INBD • INBD FWD > FWD

LANDING GEAR REMOVED LANDING GEAR REMOVED

DO IN SITU A DETAILED INSPECTION OF THE MLG FORWARD TRUNNION PIN

TRANSITION RADIUS AT THE THRESHOLD AND REPEAT INTERVALS GIVEN IN COMPLIANCE TIME. LOOK FOR EVIDENCE OF CORROSION, AND/OR FINISH DAMAGE, AND/OR SCRAPES, AND/OR SCRATCHES. IF DAMAGE IS FOUND, REPAIR OR REPLACE THE TRUNNION PIN AS APPLICABLE.

1423601 Original Issue: August 06, 2008 Revision 1: February 07, 2013 Export Controlled ECCN: 9E991 - BOEING 737-32-1402 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 55

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 06, 2008 737-32-1402Revision 1: February 07, 2013 12 of 55 BOEING SERVICE BULLETIN 737-32-1402

BLANK PAGE

Pages 13–24 of 55