Copy · U.S. DOT/FAA - SB-737-32-1448-01 · 187 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-8133; AD 2016-18-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'c2a41d87c3811d431dbd546ec20fe6be9117575b82fb3397ff7634842935778c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-32-1448 Original Issue: May 19, 2011 Revision 1: May 29, 2015 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Forward and Aft Trunnion Pin Assemblies Inspection and Change Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2011 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 1 of 187

5.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 2 of 187 BOEING SERVICE BULLETIN 737-32-1448

BLANK PAGE

Table of Contents

Revision Transmittal Sheet7

Summary11

1. PLANNING INFORMATION17

A. Effectivity17

1. Airplanes17

2. Spares Affected29

B. Concurrent Requirements29

C. Reason29

D. Description30

E. Compliance33

F. Approval42

G. Manpower42

H. Weight and Balance Changes48

I. Electrical Load Data48

J. References49

1. Existing Data:49

2. Data Supplied with this Service Bulletin:49

3. Installation Drawings Used in the Preparation of this Service Bulletin:49

K. Publications Affected49

L. Interchangeability and Intermixability of Parts50

M. Software Accomplishment Summary50

2. MATERIAL INFORMATION51

A. Material - Price and Availability51

B. Industry Support Information52

C. Parts Necessary for Each Airplane52

1. Kits/Parts52

2. Parts and Materials Supplied by the Operator54

3. Parts Modified and Reidentified56

4. Parts Removed and Not Replaced58

D. Parts Necessary to Change Spares58

E. Special Tooling - Price and Availability58

F. Special Tooling Necessary to do this Service Bulletin58

3. ACCOMPLISHMENT INSTRUCTIONS59

A. GENERAL INFORMATION59

B. WORK INSTRUCTIONS60

FIGURE 1: LEFT MAIN LANDING GEAR (MLG) OUTER CYLINDER ASSEMBLY AND TRUNNION PIN

ASSEMBLIES INSPECTION75

FIGURE 2: MAIN LANDING GEAR (MLG) FORWARD TRUNNION PIN ASSEMBLY INSPECTION . 77

FIGURE 3: MAIN LANDING GEAR (MLG) AFT TRUNNION PIN ASSEMBLY INSPECTION78

FIGURE 4: RIGHT MAIN LANDING GEAR (MLG) OUTER CYLINDER ASSEMBLY AND TRUNNION PIN

ASSEMBLIES INSPECTION79

FIGURE 5: LEFT MAIN LANDING GEAR (MLG) FORWARD OUTER CYLINDER TRUNNION BUSHING

REPLACEMENT [Group 1-2]81

FIGURE 6: LEFT MAIN LANDING GEAR (MLG) FORWARD OUTER CYLINDER TRUNNION BUSHING

REPLACEMENT [Group 3]85

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 3 of 187 BOEING SERVICE BULLETIN 737-32-1448

FIGURE 7: LEFT MAIN LANDING GEAR (MLG) AFT OUTER CYLINDER TRUNNION BUSHING

REPLACEMENT [Group 1-2]89

FIGURE 8: LEFT MAIN LANDING GEAR (MLG) AFT OUTER CYLINDER TRUNNION BUSHING

REPLACEMENT [Group 3]94

FIGURE 9: MAIN LANDING GEAR (MLG) FORWARD TRUNNION PIN CROSS BOLT BUSHING

REPLACEMENT [Group 1]99

FIGURE 10: LEFT MAIN LANDING GEAR (MLG) AFT TRUNNION PIN ASSEMBLY, AFT TRUNNION

BEARING BALL AND AFT TRUNNION BEARING RACE REMOVAL101

FIGURE 11: MAIN LANDING GEAR (MLG) AFT TRUNNION PIN CROSS BOLT BUSHING REPLACEMENT

[Group 1-2]104

FIGURE 12: MAIN LANDING GEAR (MLG) AFT TRUNNION PIN CROSS BOLT BUSHING REPLACEMENT

[Group 3]106

FIGURE 13: MAIN LANDING GEAR (MLG) AFT TRUNNION BEARING RACE INSPECTION108

FIGURE 14: LEFT MAIN LANDING GEAR (MLG) AFT TRUNNION PIN ASSEMBLY, AFT TRUNNION BEARING BALL AND AFT TRUNNION BEARING RACE INSTALLATION [Group 1-2] . 109 FIGURE 15: LEFT MAIN LANDING GEAR (MLG) AFT TRUNNION PIN ASSEMBLY, AFT TRUNNION BEARING BALL AND AFT TRUNNION BEARING RACE INSTALLATION [Group 3] . . 113

FIGURE 16: LEFT MAIN LANDING GEAR INSTALLATION117

FIGURE 17: RIGHT MAIN LANDING GEAR (MLG) FORWARD OUTER CYLINDER TRUNNION BUSHING

REPLACEMENT [Group 1-2]120

FIGURE 18: RIGHT MAIN LANDING GEAR (MLG) FORWARD OUTER CYLINDER TRUNNION BUSHING

REPLACEMENT [Group 3]124

FIGURE 19: RIGHT MAIN LANDING GEAR (MLG) AFT OUTER CYLINDER TRUNNION BUSHING

REPLACEMENT [Group 1-2]128

FIGURE 20: RIGHT MAIN LANDING GEAR (MLG) AFT OUTER CYLINDER TRUNNION BUSHING

REPLACEMENT [Group 3]133

FIGURE 21: RIGHT MAIN LANDING GEAR (MLG) AFT TRUNNION PIN ASSEMBLY, AFT TRUNNION

BEARING BALL AND AFT TRUNNION BEARING RACE REMOVAL138

FIGURE 22: RIGHT MAIN LANDING GEAR (MLG) AFT TRUNNION PIN ASSEMBLY, AFT TRUNNION BEARING BALL AND AFT TRUNNION BEARING RACE INSTALLATION [Group 1-2] . 141 FIGURE 23: RIGHT MAIN LANDING GEAR (MLG) AFT TRUNNION PIN ASSEMBLY, AFT TRUNNION BEARING BALL AND AFT TRUNNION BEARING RACE INSTALLATION [Group 3] . . 145

FIGURE 24: RIGHT MAIN LANDING GEAR INSTALLATION149

FIGURE 25: MAIN LANDING GEAR TRUNNION HOUSING ASSEMBLY RETAINER AND SEAL INSPECTION

[Group 1-2, Configuration 1]152

FIGURE 26: MAIN LANDING GEAR TRUNNION HOUSING ASSEMBLY RETAINER AND SEAL

REPLACEMENT [Group 1-2]154

APPENDIX A: FORWARD OUTER CYLINDER TRUNNION BUSHING - MAKE [Group 1-2]156

APPENDIX B: FORWARD OUTER CYLINDER TRUNNION BUSHING - MAKE [Group 3]159

APPENDIX C: AFT OUTER CYLINDER TRUNNION BUSHING - MAKE [Group 1-2]162

APPENDIX D: AFT OUTER CYLINDER TRUNNION BUSHING - MAKE [Group 3]165

APPENDIX E: FORWARD TRUNNION PIN CROSS BOLT BUSHING - MAKE [Group 1]168

APPENDIX F: AFT TRUNNION PIN CROSS BOLT BUSHING - MAKE [Group 1-2]170

APPENDIX G: AFT TRUNNION PIN CROSS BOLT BUSHING - MAKE [Group 3]172

APPENDIX H: AFT TRUNNION BEARING BALL - CHANGE [Group 1-2]174

APPENDIX I: AFT TRUNNION BEARING BALL - CHANGE [Group 3]177

APPENDIX J: AFT TRUNNION BEARING RACE - CHANGE [Group 1-2]180

APPENDIX K: AFT TRUNNION BEARING RACE - CHANGE [Group 3]183

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 4 of 187 BOEING SERVICE BULLETIN 737-32-1448

APPENDIX L: DIMENSIONING SYMBOLS186

APPENDIX M: PART DEMAND INTENT187

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 5 of 187 BOEING SERVICE BULLETIN 737-32-1448

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 6 of 187 BOEING SERVICE BULLETIN 737-32-1448

BLANK PAGE

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 737-32-1448Original Issue: May 19, 2011 Revision 1: May 29, 2015 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Forward and Aft Trunnion Pin Assemblies Inspection and Change This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Effects of this Revision on airplanes on which the original issue was previously done:

See Paragraph 1.D., Description for more information.

REASON FOR REVISION This revision is sent to add Work Package 4 for Group 1 and Group 2 airplanes that have previously changed the Main Landing Gear (MLG) trunnion pin assemblies in accordance with Work Package 3. It provides new figures to replace the seal and retainer configuration for the trunnion housing assembly. This information has also been added to Work Package 3 for operators that have not previously changed the MLG trunnion pin assemblies. In addition, 737-700 Increased Gross Weight (IGW) airplanes, which includes any 737-700 airplanes with a Boeing Business Jet (BBJ) configuration, an Extended Range (ER) configuration, and an Air Early Warning And Control (AEW&C) configuration are moved from Group 1 to Group 2 as they have a MLG configuration that is similar to 737-800 airplanes. The use of Component Maintenance Manual (CMM) and Standard Overhaul Practices Manual (SOPM) procedures that have been identified as critical in this service bulletin are mandated.

Instructions to accomplish these critical procedures now use the terminology "in accordance with". This revision also clarifies the lubrication procedure to show only the applicable lubrication locations and changes the MLG support beam part marking information.

Airplanes YG001-YG044, YG061-YG064, YG066-YG089, YG091-YG099, YG101-YG104, YG111-YG114, YG116-YG128, YG201-YG205, YG211-YG214, YG221-YG224, and YG251-YG252 are moved from Group 1 to Group 2 to agree with their Main Landing Gear (MLG) configuration.

These sections are changed:

1. Summary Background: Background information is updated. The summary evaluation table and a Fleet Team Digest (FTD) statement are added.

2. Summary Action: New Work Package 4 is added and Work Packages 1 thru 3 are updated.

3. Summary Material Information: Survey statement added.

4. Summary Illustration: New Work Package 4 is added and Work Packages 1 thru 3 are updated.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 7 of 187

5. Paragraph 1.A., Effectivity: The group configuration table is updated.

6. Paragraph 1.C., Reason: Reason information is updated. The summary evaluation table and a Fleet Team Digest (FTD) statement are added.

7. Paragraph 1.D., Description: New Work Package 4 is added and Work Packages 1 thru 3 are updated.

8. Paragraph 1.E., Compliance: New compliance tables are added and the existing table is updated.

9. Paragraph 1.G., Manpower: The existing manpower tables are updated and a new table is added for Work Package 4.

10. Paragraph 1.J., References: The reference list is updated.

11. Paragraph 1.K., Publications Affected: IPC references added.

12. Paragraph 1.M., Software Accomplishment Summary: A software section is added.

13. Paragraph 2.A., Material - Price and Availability: A new Top Kit is added and ROLT is updated.

14. Paragraph 2.C.1., Kits/Parts: A new Top Kit is added and the applicability is updated.

15. Paragraph 2.C.2., Parts and Materials Supplied by the Operator: The materials table is updated and a new table is added.

16. Paragraph 2.C.3., Parts Modified and Re-identified: A footnote reference is updated and the MLG support beam assembly part numbers are removed.

17. Paragraph 3.B., Work instructions: Work Packages 1 thru 3 are updated and Work Package 4 is added.

18. Figures 1, 4 and 10 Footnote (a) is updated.

19. Figures 5, 6, 7, 8, 9, 11, 12, 13, 16, 17, 18, 19, 20 and 24: Step table is updated.

20. Figures 5, 6, 7, 8, 17, 18, 19 and 20: Step illustration is updated.

21. Figures 14, 15, 22, 23, and 24: Part marking information is updated.

22. Figures 25 and 26: Added for this revision.

23. Appendix A, B, C and D: Cadmium plating step updated.

24. Appendix E, F and G: Step table updated.

25. Appendix H, I, J and K: Illustrations and step table are updated.

26. Appendix : Part Demand intent form added.

The data given in Information Notice 737-32-1448 IN 01 is included in this revision.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 8 of 187 BOEING SERVICE BULLETIN 737-32-1448

Pages with no vertical lines have no important changes.

REVISION HISTORY May 19, 2011Original Issue:

May 29, 2015Revision 1:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 9 of 187 BOEING SERVICE BULLETIN 737-32-1448

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 10 of 187 BOEING SERVICE BULLETIN 737-32-1448

BLANK PAGE

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 737-32-1448Original Issue: May 19, 2011 Revision 1: May 29, 2015 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Forward and Aft Trunnion Pin Assemblies Inspection and Change BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND This service bulletin is sent to make sure the left and right Main Landing Gear (MLG) forward and aft trunnion pin assemblies and the components related to the MLG forward and aft trunnion pin assemblies remain serviceable. Corrosion and chrome damage has been found on some of these components. If this service bulletin is not done, corrosion and chrome plate damage on these components could cause the MLG forward and aft trunnion pin assemblies to crack which could result in a MLG collapse.

Several operators have reported heavy corrosion and pitting of the MLG forward and aft trunnion pin assemblies.

Boeing found a number of causes for this damage which include insufficient lubrication, joint contamination and mixed greases. It was found that the lubrication between the forward and aft trunnion pin assemblies and the outer cylinder assembly bushings and the lubrication of the aft trunnion bearing ball was not sufficient to prevent wear and corrosion. It was also found that the clearances between the forward and aft trunnion pin cross bolt bushings and the cross bolts could affect the rate of wear and corrosion of MLG trunnion pin assemblies. To correct these problems, Boeing has changed the design of the outer cylinder forward and aft trunnion bushings to improve lubrication around the outer diameter of the forward and aft trunnion pin assemblies and changed the design of aft trunnion bearing split ball to add a circumferential lube groove and larger diameter through holes which improves lubrication around the aft pin at the interface with the aft trunnion bearing. In addition Boeing has changed the design of the forward and aft trunnion pin cross bolt bushings for the trunnion pins to reduce relative motion of each pin within the outer cylinder assembly bushings and reduce wear.

Accomplishment of this service bulletin lubricates and inspects existing MLG forward and aft trunnion pin assemblies at regular intervals to prevent damage and corrosion. Instructions are given to overhaul or replace damaged or corroded forward and aft trunnion pin assemblies. In addition, instructions are provided to install new forward and aft trunnion bushings in the MLG outer cylinder assembly, install new trunnion pin cross bolt bushings in the forward and aft trunnion pins, install a new/changed aft trunnion bearing ball, install a new/changed aft trunnion bearing race, and install a new forward trunnion pin housing assembly seal and retainer configuration on applicable airplanes. Installation of the new trunnion bushings in the MLG outer cylinder assembly, new/changed aft trunnion bearing ball and aft trunnion bearing race are the terminating actions to the repeat lubrication and repeat inspections given in this service bulletin and will improve grease distribution which will reduce wear in the joint and prevent corrosion.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 11 of 187

Boeing recommends to do this service bulletin at the same time as 737-32-1376 or 737-32-1402 if applicable.

Boeing Service Related Problem (SRP) 737-SRP-32-0165 is related to this service bulletin.

Boeing Fleet Team Digest (FTD) 737NG FTD 32-09001 is related to this service bulletin.

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedNoSpares Affected Paragraph 1.E., Compliance and Paragraph

1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsYesKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Parts/Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION (PRR 38275-165S) Group 1-2, Configuration 1; Group 3:

WORK PACKAGE 1:

1. Lubricate the forward and aft trunnion pin assemblies on the left and right MLG.

Group 1-2, Configuration 1; Group 3:

WORK PACKAGE 2:

1. Do a general visual inspection and a detailed inspection if necessary of the forward and aft trunnion pin assemblies on the left and right MLG.

NOTE: Make sure that you have serviceable trunnion pins available in case the trunnion pins inspected are found with corrosion or damage and need to be replaced.

a. If corrosion or damage is found on the forward trunnion pin assembly:

(1) Group 1-2, Configuration 1:

Overhaul or replace the forward trunnion pin assembly and install a new forward trunnion pin housing assembly seal and retainer configuration.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 19, 2011 737-32-1448Revision 1: May 29, 2015 12 of 187 BOEING SERVICE BULLETIN 737-32-1448

Pages 13–24 of 187