Copy · U.S. DOT/FAA - SB-737-32-1486-00 · 90 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-5468; AD 2017-04-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '679ea138e05bcfaa1da8aa74c760b2a04b7fc4048e2ad5fa71065bd301908af0'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-32-1486 Original Issue: November 06, 2014 ATA System: 3211 3221 SUBJECT: LANDING GEAR - Main and Nose Landing Gear - Landing Gear External Surface Inspection and Outer Cylinder Assembly Trunnion Bore Inspection Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2014 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: November 06, 2014 737-32-1486 1 of 90

6.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 2 of 90 BOEING SERVICE BULLETIN 737-32-1486

BLANK PAGE

Table of Contents

Summary5

1. PLANNING INFORMATION9

A. Effectivity9

1. Airplanes9

2. Spares Affected ........................................ 2 6 B. Concurrent Requirements ...................................... 2 6 C. Reason ................................................ 2 6 D. Description .............................................. 2 7 E. Compliance .............................................. 2 8 F. Approval ............................................... 3 2 G. Manpower .............................................. 3 2 H. Weight and Balance Changes .................................... 3 4 I. Electrical Load Data ......................................... 3 5 J. References .............................................. 3 5

1. Existing Data: ......................................... 3 5

2. Data Supplied with this Service Bulletin: ........................... 3 5

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 5 K. Publications Affected ........................................ 3 5 L. Interchangeability and Intermixability of Parts ........................... 3 6 M. Software Accomplishment Summary ................................ 3 6

2. MATERIAL INFORMATION ........................................ 3 7 A. Material - Price and Availability ................................... 3 7 B. Industry Support Information .................................... 3 7 C. Parts Necessary for Each Airplane ................................. 3 7

1. Kits/Parts ............................................ 3 7

2. Parts and Materials Supplied by the Operator ........................ 3 7

3. Parts Modified and Reidentified ................................ 3 8

4. Parts Removed and Not Replaced .............................. 3 8 D. Parts Necessary to Change Spares ................................. 3 8 E. Special Tooling - Price and Availability ............................... 3 8 F. Special Tooling Necessary to do this Service Bulletin ....................... 3 8

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 9 A. GENERAL INFORMATION ..................................... 3 9 B. WORK INSTRUCTIONS ....................................... 4 1 FIGURE 1: LEFT MAIN LANDING GEAR EXTERNAL SURFACE DETAILED INSPECTION ..... 5 1 FIGURE 2: LEFT MAIN LANDING GEAR (MLG) OUTER CYLINDER ASSEMBLY TRUNNION BORE DETAILED INSPECTION [Group 1-2, Configuration 1] ................... 5 3 FIGURE 3: LEFT MAIN LANDING GEAR (MLG) OUTER CYLINDER ASSEMBLY TRUNNION BUSHING INSTALLATION [Group 1-2, Configuration 1] ......................... 5 7 FIGURE 4: RIGHT MAIN LANDING GEAR (MLG) EXTERNAL SURFACE DETAILED INSPECTION . 63 FIGURE 5: RIGHT MAIN LANDING GEAR (MLG) OUTER CYLINDER ASSEMBLY TRUNNION BORE DETAILED INSPECTION [Group 1-2, Configuration 1] ................... 6 5 FIGURE 6: RIGHT MAIN LANDING GEAR (MLG) OUTER CYLINDER ASSEMBLY TRUNNION BUSHING INSTALLATION [Group 1-2, Configuration 1] ......................... 6 9 FIGURE 7: NOSE LANDING GEAR (NLG) EXTERNAL SURFACE DETAILED INSPECTION ..... 7 5 APPENDIX A: .................................................. 7 7 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 3 of 90 BOEING SERVICE BULLETIN 737-32-1486

APPENDIX B: FORWARD OUTER CYLINDER TRUNNION BUSHING - MAKE .............. 8 2 APPENDIX C: AFT OUTER CYLINDER TRUNNION BUSHING - MAKE .................. 8 5 APPENDIX D: .................................................. 8 8 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 4 of 90 BOEING SERVICE BULLETIN 737-32-1486

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 737-32-1486Original Issue: November 06, 2014 ATA System: 3211 3221 SUBJECT: LANDING GEAR - Main and Nose Landing Gear - Landing Gear External Surface Inspection and Outer Cylinder Assembly Trunnion Bore Inspection BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND This service bulletin gives instructions to inspect the external surfaces of the Left and Right Main Landing Gear (MLG) and Nose Landing Gear (NLG) for areas of cracked, loose, peeling, or missing paint, primer or sealant, or any corrosion. Second, inspect the MLG outer cylinder assembly trunnion bores for corrosion, pitting, missing primer, or missing Corrosion Inhibiting Compound (CIC). If this service bulletin is not done, stress corrosion cracking could occur and may cause a fracture and gear collapse.

Several operators have reported paint deterioration on the surface of the MLG and NLG and early onset of corrosion in the trunnion bore of the MLG outer cylinder. An MRO first observed forward trunnion bore corrosion on a right MLG while installing new bushings with service bulletin 737-32-1448. Another MRO disclosed that between 2007 and 2010 the primer used on the landing gear components did not comply with BMS10-79. Paint chip and trunnion bore analysis showed that unqualified primer was used, primer application was up to 5 times too thick while enamel was too thin, there was early deterioration of the fillet seal at the trunnion bore, and the trunnion bushing installation process did not follow the SOPM which may have scraped the finish on the bore.

This service bulletin requires operators to inspect the surfaces of the MLG and NLG for surface finish damage.

Any damage requires repair, component replacement, or landing gear replacement. This inspection must be repeated in accordance with the compliance time. This service bulletin also inspects the MLG outer cylinder assembly trunnion bores for inner surface damage and corrosion. Any damage requires repair, component replacement, or landing gear replacement. After inspection, instructions are provided to install new forward and aft trunnion bushings, based on service bulletin 737-32-1448.

Aircraft that have already completed the inspection of the MLG and NLG surfaces and the outer cylinder trunnion bore by Boeing's request and completed the terminating action for this service bulletin do not need to do the actions in this service bulletin. Aircraft that have already completed the inspection of the MLG trunnion bores do not need to repeat the inspection as required by Table 2 of Paragraph 1.E., Compliance. A table of the part numbers and serial numbers of the affected MLG, side struts, NLG, and drag struts has been included in APPENDIX D.

Boeing Service Related Problem (SRP) 737NG-SRP-32-0186 is related to this service bulletin.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 5 of 90

Boeing Fleet Team Digest (FTD) 737NG FTD 32-13005 is related to this service bulletin.

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedYesSpares Affected Paragraph 1.E., Compliance and Paragraph

1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsNoKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Parts/Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION Inspect for the affected part numbers and serial numbers of the MLG and NLG listed in APPENDIX D. If affected parts are installed on the airplane, then the applicable actions must be taken in accordance with this service bulletin.

WORK PACKAGE 1: MAIN LANDING GEAR - EXTERNAL SURFACE AND TRUNNION BORE DETAILED INSPECTIONS (SAFETY):

Do a detailed inspection of the external surfaces of the MLG for areas of cracked, loose, peeling, or missing paint, primer or sealant, or any corrosion. (Group 1-2, Configuration 1) Remove the MLG to do a detailed inspection the outer cylinder trunnion bore for corrosion, pitting, missing primer, or missing CIC. Corrective action for the inspections is the choice of repair, replace individual component(s), or replace the MLG. The external surface detailed inspection must be repeated, and terminating action is replacement of the MLG.

WORK PACKAGE 2: NOSE LANDING GEAR - EXTERNAL SURFACE DETAILED INSPECTION (ECONOMIC):

Do a detailed inspection of the external surfaces of the NLG. Corrective action for the inspection is the choice of repair, replace individual component(s), or replace the NLG. The external surface detailed inspection must be repeated, and terminating action is replacement of the NLG.

EFFECTIVITY 737-600/700/700C/800/900 Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 6 of 90 BOEING SERVICE BULLETIN 737-32-1486

COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of February 21, 2013. Please refer to Paragraph 2.B., Industry Support Information. The warranty remedies will expire eight years from the original issue date of this service bulletin.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION Operator Supplied Parts/Materials.

Refer to Paragraph 2.A., Material - Price and Availability.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 7 of 90 BOEING SERVICE BULLETIN 737-32-1486

Page 8OCROpen in PDF

BOEING SERVICE BULLETIN 737-32-1486

INSPECT THE EXTERNAL

SURFACES OF THE LEFT

HAND AND RIGHT HAND

MAIN LANDING GEAR (MLG) FOR AREAS OF

CRACKED, LOOSE, PEELING. OR MISSING

PAINT, PRIMER OR

SEALANT, OR ANY CORROSION.

INSPECT THE MLG

OUTER CYLINDER

ASSEMBLY TRUNNION

BORES FOR CORROSION,

PITTING, MISSING

PRIMER, AND MISSING

CORROSION INHIBITING COMPOUND (CIC).

INSPECT THE EXTERNAL SURFACES OF

THE NOSE LANDING GEAR (NG) FOR

AREAS OF CRACKED, LOOSE, PEELING,

OR MISSING PAINT, PRIMER, OF

SEALANT, OR ANY CORROSION 2289606 Original Issue: November 06, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING Work - See page 1 for details. 737-32-1486 8 of 90

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-32-1486 Original Issue: November 06, 2014 ATA System: 3211 3221 SUBJECT: LANDING GEAR - Main and Nose Landing Gear - Landing Gear External Surface Inspection and Outer Cylinder Assembly Trunnion Bore Inspection BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

1. PLANNING INFORMATION A. Effectivity

1. Airplanes Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

This service bulletin is for the airplane(s) shown below.

The airplane effectivity in Group 1 below is based on the aircraft that received affected parts from the Boeing Exchange Program. Removal of affected parts after this installation may allow installation of affected parts or components on airplanes in Group 2. Make sure the inspections described in this service bulletin are accomplished on all airplanes for which affected parts or components have been installed.

NOTE: The Variable Number table below includes all affected airplanes up to Line Number 5170.

Affected airplanes after Line Number 5170 will be added to the service bulletin's MyBoeingFleet.com (MBF) "get effectivity" result when they are added to the MBF Fleet Profile Page.

DESCRIPTIONCONFIGURATIONGROUP 737-700/800 Airplanes that received and installed affected parts from the Boeing Exchange Program. If the affected part numbers with serial numbers listed in APPENDIX D are not installed, then no action is required.

-1 Airplanes that did not incorporate 737-32-1448 or inspect the outer cylinder assembly trunnion bore after the last landing gear overhaul.

1 Airplanes that incorporated 737-32-1448 or inspected the outer cylinder assembly trunnion bore after the last landing gear overhaul.

2 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 9 of 90

DESCRIPTIONCONFIGURATIONGROUP 737-600/700/700C/800/900 Airplanes that may have received affected parts because the parts are rotable. If the affected part numbers with serial numbers listed in APPENDIX D are not installed, then no action is required.

-2 Airplanes that did not incorporate 737-32-1448 or inspect the outer cylinder assembly trunnion bore after the last landing gear overhaul.

1 Airplanes that incorporated 737-32-1448 or inspected the outer cylinder assembly trunnion bore after the last landing gear overhaul.

2 Airplane Models:

737-600, 737-700, 737-700C, 737-800, 737-900 GroupVariable Number 2YA001 - YA099 2YA101 - YA199 2YA201 - YA211 2YA221 2YA231 - YA242 2YA251 - YA256 2YA271 - YA272 2YA291 2YA301 1YA302 2YA311 - YA314 2YA321 - YA323 2YA336 - YA345 2YA351 2YA356 - YA357 2YA366 - YA367 2YA371 - YA377 2YA501 - YA536 2YA541 - YA552 2YA571 - YA577 1YA578 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 10 of 90 BOEING SERVICE BULLETIN 737-32-1486

GroupVariable Number 2YA601 - YA615 2YA621 - YA622 2YA626 - YA631 2YA635 - YA636 2YA641 - YA642 2YA645 - YA650 2YA656 - YA659 2YA666 - YA667 2YA671 - YA672 2YA681 - YA691 2YA701 - YA704 1YA705 2YA706 - YA710 2YA721 - YA722 2YA731 - YA734 2YA751 - YA756 2YA801 - YA803 2YA809 2YA811 - YA814 2YA831 1YA832 - YA833 2YA834 - YA835 1YA841 - YA842 2YA843 - YA862 2YA881 - YA882 2YA891 - YA892 2YA961 - YA978 2YB001 - YB006 2YB101 - YB126 1YB127 2YB128 - YB132 2YB151 - YB152 1YB153 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 11 of 90 BOEING SERVICE BULLETIN 737-32-1486

GroupVariable Number 2YB156 - YB158 2YB161 - YB164 2YB171 - YB172 2YB181 - YB184 2YB201 - YB208 2YB271 2YB276 2YB301 - YB310 2YB371 - YB392 2YB501 - YB502 2YB521 - YB526 2YB541 - YB544 2YB551 2YB561 - YB598 2YB601 - YB636 2YB651 2YB656 2YB671 - YB672 2YB851 - YB863 2YB871 - YB874 2YB881 - YB893 2YB901 - YB903 2YB911 2YB961 - YB975 2YB981 2YB986 - YB998 2YC001 - YC030 2YC051 - YC084 2YC091 - YC095 2YC101 - YC103 1YC104 2YC111 - YC113 2YC121 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 06, 2014 737-32-1486 12 of 90 BOEING SERVICE BULLETIN 737-32-1486

Pages 13–24 of 90