Copy · U.S. DOT/FAA - Service Bulletin · 127 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-0384; AD 2012-09-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '5d83a488591dc89f5db3aff0e06e0386c8ee51c31f12456f27b816bab5cb50e1'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-53-1286 Original Issue: November 20, 2008 Revision 1: December 14, 2009 ATA System: 5321 5342 SUBJECT: FUSELAGE - Passenger Cabin Floors - Body Station 500C to 540 - Seat Track Pivot Links, Seat Tracks and Floor Panels Replacement Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 2008 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.

This document includes proprietary information owned by The Boeing Company and/or one or more third parties.

Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 1 of 127

4.0

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 2 of 127 BOEING SERVICE BULLETIN 737-53-1286

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary7

1. PLANNING INFORMATION ........................................ 1 1 A. Effectivity ............................................... 1 1

1. Airplanes ............................................ 1 1

2. Spares Affected ........................................ 1 2 B. Concurrent Requirements ...................................... 1 2 C. Reason ................................................ 1 2 D. Description .............................................. 1 3 E. Compliance .............................................. 1 3 F. Approval ............................................... 1 4 G. Manpower .............................................. 1 4 H. Weight and Balance Changes .................................... 1 5 I. Electrical Load Data ......................................... 1 5 J. References .............................................. 1 5

1. Existing Data .......................................... 1 5

2. Data supplied with this Service Bulletin ............................ 1 6

3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 1 6 K. Publications Affected ........................................ 1 6 L. Interchangeability and Intermixability of Parts ........................... 1 6

2. MATERIAL INFORMATION ........................................ 1 7 A. Material - Price and Availability ................................... 1 7 B. Industry Support Information .................................... 1 7 C. Parts Necessary For Each Airplane ................................. 1 8

1. Kits/Parts ............................................ 1 8

2. Parts and Materials Supplied by the Operator ........................ 2 4

3. Parts Modified and Reidentified ................................ 2 5

4. Parts Removed and Not Replaced .............................. 2 5 D. Parts Necessary to Change Spares ................................. 2 5 E. Special Tooling - Price and Availability ............................... 2 5 F. Special Tooling Necessary to do this Service Bulletin ....................... 2 5

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 7 A. GENERAL INFORMATION ..................................... 2 7 B. WORK INSTRUCTIONS ....................................... 2 7 FIGURE 1: PASSENGER COMPARTMENT FLOOR PANELS ACROSS THE CABIN BETWEEN FRAME STA 500C AND STA 540 - REMOVAL ............................ 3 0 FIGURE 2: SEAT TRACKS BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT INBOARD, LEFT OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL .... 3 2 FIGURE 3: SEAT TRACK PIVOT LINKS BETWEEN STA 520 AND STA 537.45 AT THE LEFT INBOARD, LEFT OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL . 35 FIGURE 4: SEAT TRACK PIVOT LINK CHANNELS AFT OF FLOOR BEAM AT STA 520 AT THE LEFT

INBOARD, LEFT OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL ........................................... 3 7 FIGURE 5: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE LEFT OUTBOARD POSITION - INSTALLATION ....................... 3 9

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 3 of 127 BOEING SERVICE BULLETIN 737-53-1286

FIGURE 6: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD POSITION

- MODIFICATION FOR LATER INSTALLATION ....................... 4 2 FIGURE 7: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD POSITION - PREPARATION FOR LATER INSTALLATION ......... 4 6 FIGURE 8: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD POSITION - INSTALLATION ................................. 5 0 FIGURE 9: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD POSITION - INSTALLATION ................................. 5 6 FIGURE 10: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE LEFT INBOARD POSITION - INSTALLATION ........................ 6 0 FIGURE 11: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE LEFT INBOARD POSITION - MODIFICATION FOR LATER INSTALLATION ........................ 6 3 FIGURE 12: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT INBOARD POSITION - PREPARATION FOR LATER INSTALLATION ................. 6 7 FIGURE 13: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT INBOARD POSITION

- INSTALLATION ........................................ 7 1 FIGURE 14: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT AT THE LEFT INBOARD POSITION - INSTALLATION ................................. 7 7 FIGURE 15: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE RIGHT INBOARD POSITION - INSTALLATION ....................... 8 1 FIGURE 16: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE RIGHT INBOARD POSITION - MODIFICATION FOR LATER INSTALLATION ........................ 8 4 FIGURE 17: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE RIGHT INBOARD POSITION - PREPARATION FOR LATER INSTALLATION ................. 8 8 FIGURE 18: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE RIGHT INBOARD POSITION - INSTALLATION ................................. 9 2 FIGURE 19: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT AT THE RIGHT INBOARD POSITION - INSTALLATION ................................. 9 8 FIGURE 20: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE RIGHT OUTBOARD POSITION - INSTALLATION ..................... 1 0 2 FIGURE 21: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE RIGHT OUTBOARD POSITION

- MODIFICATION FOR LATER INSTALLATION ...................... 1 0 5 FIGURE 22: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE RIGHT OUTBOARD POSITION - PREPARATION FOR LATER INSTALLATION ......... 1 0 9 FIGURE 23: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE RIGHT OUTBOARD POSITION - INSTALLATION ................................. 1 1 3 FIGURE 24: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT AT THE RIGHT OUTBOARD POSITION - INSTALLATION ......................... 1 2 0 FIGURE 25: PASSENGER COMPARTMENT FLOOR PANELS ACROSS THE CABIN BETWEEN FRAME STA 500C AND STA 540 - INSTALLATION ......................... 1 2 4

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 4 of 127 BOEING SERVICE BULLETIN 737-53-1286

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 737-53-1286Original Issue: November 20, 2008 Revision 1: December 14, 2009 ATA System: 5321 5342 SUBJECT: FUSELAGE - Passenger Cabin Floors - Body Station 500C to 540 - Seat Track Pivot Links, Seat Tracks and Floor Panels Replacement This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION No more work is necessary on airplanes changed in accordance with the original issue of this service bulletin.

REASON FOR REVISION As a part of a service bulletin validation program, this change was completed on airplane YM221 by Service Bulletin 737-53-1286 Original Issue before the release of Revision 1 of this service bulletin. The change completed on airplane YM221 by Service Bulletin 737-53-1286 Original Issue is equivalent to the release of Revision 1 of this service bulletin. Airplane YM221 has the configuration of a Group 1 airplane.

This revision is sent to inform operators of changes made as a result of recommendations from service bulletin validation.

These sections were changed:

1. Paragraph 1.K.2., Damage Tolerance Based Structural Inspections paragraph is added.

2. Paragraph 2.A., Material - Price and Availability: Top kit and supplemental kit price and availability is added.

3. Paragraph 2.C., Parts Necessary For Each Airplane: A new replacement Top kit and a supplemental kit is added.

4. FIGURE 2: A new note is added to make sure radius fillers are removed.

5. FIGURE 5, 10, 15 and 20: The fastener code is updated.

6. FIGURE 6, 7, 8, 11, 12, 13, 16, 17, 18, 21, 22 and 23: U configuration parts have been changed into Y configuration parts.

7. FIGURE 7, 8, 12, 13, 17, 18, 22 and 23: The splice angle fastener pattern is updated.

8. FIGURE 7, 12, 17 and 22: A new note is added to the step table for correct fastener spacing.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 5 of 127

9. FIGURE 8, 13, 18 and 23: The forward direction arrow and the fastener code F fastener is updated.

10. FIGURE 13 and 18: Fastener code G quantity is updated.

11. FIGURE 25: A step to install two plugs and drill new holes is added. Also the floor panel fastener length is updated.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY November 20, 2008Original Issue:

December 14, 2009Revision 1:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 6 of 127 BOEING SERVICE BULLETIN 737-53-1286

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 737-53-1286Original Issue: November 20, 2008 Revision 1: December 14, 2009 ATA System: 5321 5342 SUBJECT: FUSELAGE - Passenger Cabin Floors - Body Station 500C to 540 - Seat Track Pivot Links, Seat Tracks and Floor Panels Replacement BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND Accomplishment of this service bulletin will prevent the passenger seat leg shear plunger from being installed across the seat track pivot joint at approximately STA 521. If the work given in this service bulletin is not done and a passenger seat leg shear plunger is installed across a pivot joint, the structural integrity of the seat track and seat track pivot link assembly will be reduced and this could lead to the subsequent failure of the passenger seat mounting and possible passenger injury.

It has been observed that in the current configuration of the affected airplanes, the passenger seat leg shear plunger is installed across the seat track pivot joint at approximately STA 521. The existing passenger seat track and pivot link design was not intended to carry seat leg plunger point loads at this location. The noncompliance is to FAR/JAR 25-561 emergency landing conditions, especially the 9G forward condition.

This service bulletin gives instructions to move the seat track pivot point approximately 2 inches aft to allow the passenger seat leg plunger to be installed onto the seat track at STA 521.45. The existing aft seat leg fittings span the STA 521.45 Stay-Out Zone. The Stay-Out Zone defines the flex area of the aircraft while in flight and defines fatigue loading of the aircraft structure. Accomplishment of this service bulletin will ensure that the passenger seat leg shear plunger is not installed across the pivot joint and restore the 9G forward loading condition in the areas around Body Station 520.

This service bulletin is related to Service Bulletin 737-25-1596. Service Bulletin 737-25-1596 gives instructions to change the passenger seat configuration after accomplishment of the structural changes given in this service bulletin.

Boeing Service Related Problem (SRP) 737NG-SRP-25-0272 is related to this service bulletin.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 7 of 127

ACTION (PRR 38740) Get access to the passenger cabin. Remove the passenger seats, seat track covers, passenger floor carpets and passenger floor panels across the cabin between STA 500C and STA 540. Remove the existing seat track pivot link assemblies. Cut the seat track at STA 500C + 9.25 and remove the section of the track from the cut point to STA 520. Install new seat track pivot link assemblies and new seat track sections. Install 5 new passenger floor panels. Install the remaining floor panels and equipment that was removed for access.

EFFECTIVITY 737-700 Airplanes. Refer to Paragraph 1.A., Effectivity for the list of affected airplanes.

COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Boeing recommends that the change given in this service bulletin be done within 72 months after the original issue date of this service bulletin.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of May 9, 2007. Please refer to Paragraph

2.B., Industry Support Information.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION Boeing Supplied Kits/Parts.

Refer to Paragraph 2.A., Material - Price and Availability.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 8 of 127 BOEING SERVICE BULLETIN 737-53-1286

Page 9OCROpen in PDF

BOEING SERVICE BULLETIN 737-53-1286 STA 540

STA STA 500 520

STA REMOVE AND INSTALL NEW 360 PIVOT LINK ASSEMBLIES AND PIVOT LINK CHANELS. INSTALL NEW FLOOR PANELS AT STA 520

- STA 540 RBL SEE 45.5 RBL

- 24.75 LBL

24.75 LBL

45.5 STA 540 STA 520

CUT AND REMOVE AFT SECTION OF SEAT TRACKS. STA INSTALL NEW SEAT TRACKS 500D

AND SPLICE TO EXISTING STA SEAT TRACKS. FWDE 500C

AFTER PASSENGER FLOOR

PANEL REMOVAL 1520702 Original Issue: November 20, 2008 Revision 1: December 14, 2009 BOEING PROPRIETARY - 737-53-1286 Copyright © Unpublished Work - See page 1 for details. 9 of 127

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 10 of 127 BOEING SERVICE BULLETIN 737-53-1286

BLANK PAGE

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-53-1286 Original Issue: November 20, 2008 Revision 1: December 14, 2009 ATA System: 5321 5342 SUBJECT: FUSELAGE - Passenger Cabin Floors - Body Station 500C to 540 - Seat Track Pivot Links, Seat Tracks and Floor Panels Replacement BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

1. PLANNING INFORMATION A. Effectivity

1. Airplanes This service bulletin is for the airplanes shown below. Refer to PRR 38740 for data about this change.

Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

DESCRIPTIONCONFIGURATIONGROUP 737-700 Airplanes with a passenger seat configuration that could result in a seat leg plunger being installed across a seat track pivot link at the Section 43/44 interface.

-1 Airplane Models:

737-700 GroupVariable Number 1YB371 - YB392 1YM201 - YM223 1YM226 - YM230

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 11 of 127

2. Spares Affected Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C.1., Kits/Parts for the recommended use.

B. Concurrent Requirements None.

C. Reason Accomplishment of this service bulletin will prevent the passenger seat leg shear plunger from being installed across the seat track pivot joint at approximately STA 521. If the work given in this service bulletin is not done and a passenger seat leg shear plunger is installed across a pivot joint, the structural integrity of the seat track and seat track pivot link assembly will be reduced and this could lead to the subsequent failure of the passenger seat mounting and possible passenger injury.

It has been observed that in the current configuration of the affected airplanes, the passenger seat leg shear plunger is installed across the seat track pivot joint at approximately STA 521. The existing passenger seat track and pivot link design was not intended to carry seat leg plunger point loads at this location. The noncompliance is to FAR/JAR 25-561 emergency landing conditions, especially the 9G forward condition.

This service bulletin gives instructions to move the seat track pivot point approximately 2 inches aft to allow the passenger seat leg plunger to be installed onto the seat track at STA 521.45. The existing aft seat leg fittings span the STA 521.45 Stay-Out Zone. The Stay-Out Zone defines the flex area of the aircraft while in flight and defines fatigue loading of the aircraft structure. Accomplishment of this service bulletin will ensure that the passenger seat leg shear plunger is not installed across the pivot joint and restore the 9G forward loading condition in the areas around Body Station 520.

This service bulletin is related to Service Bulletin 737-25-1596. Service Bulletin 737-25-1596 gives instructions to change the passenger seat configuration after accomplishment of the structural changes given in this service bulletin.

Boeing Service Related Problem (SRP) 737NG-SRP-25-0272 is related to this service bulletin.

As a part of a service bulletin validation program, this change was completed on airplane YM221 by Service Bulletin 737-53-1286 Original Issue before the release of Revision 1 of this service bulletin.

The change completed on airplane YM221 by Service Bulletin 737-53-1286 Original Issue is equivalent to the release of Revision 1 of this service bulletin. Airplane YM221 has the configuration of a Group 1 airplane.

Revision 1 is sent to inform operators of changes made as a result of recommendations from service bulletin validation.

These sections were changed:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 20, 2008 737-53-1286Revision 1: December 14, 2009 12 of 127 BOEING SERVICE BULLETIN 737-53-1286

Pages 13–24 of 127