Copy · SB-737-53-1309-01_Rev1 -Part1 · 140 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0919, the docket of a proposed AD (Federal Register 2025-09770). Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '77941c78ecf20a9fc6995fda54033c1944488b7977aac8f5c7584a43a0b3bc79'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-53-1309 Original Issue: October 20, 2011 Revision 1: May 22, 2024 ATA System: 5331 SUBJECT: FUSELAGE - Skin - Chem-mill Steps in Crown Skins at Specified Locations - Inspection and Modification EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.

9E991ECCN:

BOEING PROPRIETARY Copyright © 2024 The Boeing Company Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 1 of 388

5.0

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 2 of 388 BOEING SERVICE BULLETIN 737-53-1309

BLANK PAGE

Table of Contents

Revision Transmittal Sheet7

Summary9

1. PLANNING INFORMATION13

A. Effectivity13

1. Airplanes13

2. Spares Affected14

B. Concurrent Requirements14

C. Reason14

D. Description15

E. Compliance15

F. Approval36

G. Manpower36

H. Weight and Balance Changes48

I. Electrical Load Data50

J. References51

1. Existing Data:51

2. Data Supplied with this Service Bulletin:51

3. Installation Drawings Used in the Preparation of this Service Bulletin:51

K. Publications Affected52

L. Interchangeability and Intermixability of Parts52

M. Software Accomplishment Summary52

2. MATERIAL INFORMATION53

A. Material - Price and Availability53

B. Industry Support Information53

C. Parts Necessary for Each Airplane53

1. Kits/Parts53

2. Parts and Materials Supplied by the Operator53

3. Parts Modified and Reidentified59

4. Parts Removed and Not Replaced59

D. Parts Necessary to Change Spares59

E. Special Tooling - Price and Availability59

F. Special Tooling Necessary to do this Service Bulletin59

3. ACCOMPLISHMENT INSTRUCTIONS61

A. GENERAL INFORMATION61

B. WORK INSTRUCTIONS62

FIGURE 1: FIGURE LAYOUT MAP67

FIGURE 2: FUSELAGE - SKIN - FORWARD ENTRY DOOR AREA - CHEM MILL STEP INSPECTION. 70 FIGURE 3: FUSELAGE - SKIN - FORWARD ENTRY DOOR AREA - INTERNAL MODIFICATION . . 72 FIGURE 4: FUSELAGE - SKIN - FORWARD ENTRY DOOR AREA - POST MODIFICATION INSPECTION

AT OUTER FASTENER ROWS80

FIGURE 5: FUSELAGE - SKIN - FORWARD ENTRY DOOR AREA - POST MODIFICATION INSPECTION

AT CHEM MILL STEP84

FIGURE 6: FUSELAGE - SKIN - SKIN PAD-UP AREA AT FORWARD ENTRY DOOR - CHEM MILL STEP

INSPECTION88

FIGURE 7: FUSELAGE - SKIN - SKIN PAD-UP AREA AT FORWARD ENTRY DOOR AFT SIDE - INTERNAL

MODIFICATION90

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 3 of 388 BOEING SERVICE BULLETIN 737-53-1309

FIGURE 8: FUSELAGE - SKIN - SKIN PAD-UP AREA AT FORWARD ENTRY DOOR AFT SIDE - POST

MODIFICATION INSPECTION AT OUTER FASTENER ROWS94

FIGURE 9: FUSELAGE - SKIN - SKIN PAD-UP AREA AT FORWARD ENTRY DOOR AFT SIDE - POST

MODIFICATION INSPECTION AT CHEM MILL STEP96

FIGURE 10: FUSELAGE - SKIN - TCAS ANTENNA AREA - CHEM MILL STEP INSPECTION98

FIGURE 11: FUSELAGE - SKIN - TCAS ANTENNA AREA - INTERNAL MODIFICATION100

FIGURE 12: FUSELAGE - SKIN - TCAS ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER

FASTENER ROWS104

FIGURE 13: FUSELAGE - SKIN - TCAS ANTENNA AREA - POST MODIFICATION INSPECTION AT CHEM

MILL STEP106

FIGURE 14: FUSELAGE - SKIN - ATC ANTENNA AREA - CHEM MILL STEP INSPECTION108

FIGURE 15: FUSELAGE - SKIN - ATC ANTENNA AREA - INTERNAL MODIFICATION110

FIGURE 16: FUSELAGE - SKIN - ATC ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER

FASTENER ROWS121

FIGURE 17: FUSELAGE - SKIN - ATC ANTENNA AREA - POST MODIFICATION INSPECTION AT CHEM

MILL STEP126

FIGURE 18: FUSELAGE - SKIN - TACAN ANTENNA AREA - CHEM MILL STEP INSPECTION . . . 131

FIGURE 19: FUSELAGE - SKIN - TACAN ANTENNA AREA - INTERNAL MODIFICATION133

FIGURE 20: FUSELAGE - SKIN - TACAN ANTENNA AREA - POST MODIFICATION INSPECTION AT

OUTER FASTENER ROWS138

FIGURE 21: FUSELAGE - SKIN - TACAN ANTENNA AREA - POST MODIFICATION INSPECTION AT

CHEM MILL STEP140

FIGURE 22: FUSELAGE - SKIN - HIGH GAIN SATCOM ANTENNA - LEFT SIDE - CHEM MILL STEP

INSPECTION142

FIGURE 23: FUSELAGE - SKIN - HIGH GAIN SATCOM ANTENNA - LEFT SIDE - INTERNAL MODIFICATION

.144

FIGURE 24: FUSELAGE - SKIN - HIGH GAIN SATCOM ANTENNA - LEFT SIDE - POST MODIFICATION

INSPECTION AT OUTER FASTENER ROWS154

FIGURE 25: FUSELAGE - SKIN - HIGH GAIN SATCOM ANTENNA - LEFT SIDE - POST MODIFICATION

INSPECTION AT CHEM MILL STEP158

FIGURE 26: FUSELAGE - SKIN - HIGH GAIN SATCOM ANTENNA - RIGHT SIDE - CHEM MILL STEP

INSPECTION162

FIGURE 27: FUSELAGE - SKIN - HIGH GAIN SATCOM ANTENNA - RIGHT SIDE - INTERNAL

MODIFICATION164

FIGURE 28: FUSELAGE - SKIN - HIGH GAIN SATCOM ANTENNA - RIGHT SIDE - POST MODIFICATION

INSPECTION AT OUTER FASTENER ROWS174

FIGURE 29: FUSELAGE - SKIN - HIGH GAIN SATCOM ANTENNA - RIGHT SIDE - POST MODIFICATION

INSPECTION AT CHEM MILL STEP178

FIGURE 30: FUSELAGE - SKIN - GPS ANTENNA AREA - CHEM MILL STEP INSPECTION182

FIGURE 31: FUSELAGE - SKIN - GPS ANTENNA AREA - INTERNAL MODIFICATION184

FIGURE 32: FUSELAGE - SKIN - GPS ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER

FASTENER ROWS193

FIGURE 33: FUSELAGE - SKIN - GPS ANTENNA AREA - POST MODIFICATION INSPECTION AT CHEM

MILL STEP195

FIGURE 34: FUSELAGE - SKIN - MLS ANTENNA AREA - CHEM MILL STEP INSPECTION197

FIGURE 35: FUSELAGE - SKIN - MLS ANTENNA AREA - INTERNAL MODIFICATION199

FIGURE 36: FUSELAGE - SKIN - MLS ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER

FASTENER ROWS204

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 4 of 388 BOEING SERVICE BULLETIN 737-53-1309

FIGURE 37: FUSELAGE - SKIN - MLS ANTENNA AREA - POST MODIFICATION INSPECTION AT CHEM

MILL STEP206

FIGURE 38: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - CHEM MILL STEP

INSPECTION208

FIGURE 39: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - INTERNAL

MODIFICATION210

FIGURE 40: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - POST MODIFICATION

INSPECTION AT OUTER FASTENER ROWS215

FIGURE 41: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - POST MODIFICATION

INSPECTION AT CHEM MILL STEP217

FIGURE 42: FUSELAGE - SKIN - ELT ANTENNA AREA - CHEM MILL STEP INSPECTION219

FIGURE 43: FUSELAGE - SKIN - ELT ANTENNA AREA - INTERNAL MODIFICATION221

FIGURE 44: FUSELAGE - SKIN - ELT ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER

FASTENER ROWS226

FIGURE 45: FUSELAGE - SKIN - ELT ANTENNA AREA - POST MODIFICATION INSPECTION AT CHEM

MILL STEP228

FIGURE 46: FUSELAGE - SKIN - ELT ANTENNA AREA - CHEM MILL STEP INSPECTION230

FIGURE 47: FUSELAGE - SKIN - ELT ANTENNA AREA - INTERNAL MODIFICATION [Group 2-3] . 232 FIGURE 48: FUSELAGE - SKIN - ELT ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER

FASTENER ROWS [Group 2-3]237

FIGURE 49: FUSELAGE - SKIN - ELT ANTENNA AREA - POST MODIFICATION INSPECTION AT CHEM

MILL STEP [Group 2-3]239

FIGURE 50: FUSELAGE - SKIN - ELT ANTENNA AREA - INTERNAL MODIFICATION [Group 1] . . 241 FIGURE 51: FUSELAGE - SKIN - ELT ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER

FASTENER ROWS [Group 1]246

FIGURE 52: FUSELAGE - SKIN - ELT ANTENNA AREA - POST MODIFICATION INSPECTION AT CHEM

MILL STEP [Group 1]248

FIGURE 53: FUSELAGE - SKIN - ADF ANTENNA AREA - CHEM MILL STEP INSPECTION250

FIGURE 54: FUSELAGE - SKIN - ADF ANTENNA AREA - INTERNAL MODIFICATION252

FIGURE 55: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER

FASTENER ROWS263

FIGURE 56: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT CHEM

MILL STEP268

FIGURE 57: FUSELAGE - SKIN - ADF ANTENNA AREA - CHEM MILL STEP INSPECTION273

FIGURE 58: FUSELAGE - SKIN - ADF ANTENNA AREA - INTERNAL MODIFICATION275

FIGURE 59: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER

FASTENER ROWS284

FIGURE 60: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT CHEM

MILL STEP288

FIGURE 61: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - CHEM MILL STEP INSPECTION

[Group 2-3]292

FIGURE 62: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - INTERNAL MODIFICATION [Group

2-3]294

FIGURE 63: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION

AT OUTER FASTENER ROWS [Group 2-3]303

FIGURE 64: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION

AT CHEM MILL STEP [Group 2-3]305

FIGURE 65: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, LEFT SIDE

(PRE-PRR38432) - CHEM MILL STEP INSPECTION [Group 1-2]307

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 5 of 388 BOEING SERVICE BULLETIN 737-53-1309

FIGURE 66: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, LEFT SIDE

(PRE-PRR38432) - INTERNAL AND EXTERNAL MODIFICATION [Group 1-2]309

FIGURE 67: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, LEFT SIDE (PRE-PRR38432) - POST MODIFICATION INSPECTION AT OUTER FASTENER ROWS

[Group 1-2]319

FIGURE 68: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, LEFT SIDE (PRE-PRR38432) - POST MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 1-2]

.324

FIGURE 69: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, RIGHT SIDE

(PRE-PRR38432) - CHEM-MILL STEP INSPECTION [Group 1-2]327

FIGURE 70: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, RIGHT SIDE

(PRE-PRR38432) - INTERNAL AND EXTERNAL MODIFICATION [Group 1-2]329

FIGURE 71: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, RIGHT SIDE (PRE-PRR38432) - POST MODIFICATION INSPECTION AT OUTER FASTENER ROWS

[Group 1-2]339

FIGURE 72: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, RIGHT SIDE (PRE-PRR38432) - POST MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 1-2]

.344

FIGURE 73: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, LEFT SIDE

(POST-PRR38432) - CHEM-MILL STEP INSPECTION [Group 3]347

FIGURE 74: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, LEFT SIDE

(POST-PRR38432) - INTERNAL AND EXTERNAL MODIFICATION [Group 3]349

FIGURE 75: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, LEFT SIDE (POST-PRR38432) - POST MODIFICATION INSPECTION AT OUTER FASTENER ROWS

[Group 3]359

FIGURE 76: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, LEFT SIDE (POST-PRR38432) - POST MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 3]

.364

FIGURE 77: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, RIGHT SIDE

(POST-PRR38432) - CHEM-MILL STEP INSPECTION [Group 3]367

FIGURE 78: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, RIGHT SIDE

(POST-PRR38432) - INTERNAL AND EXTERNAL MODIFICATION [Group 3]369

FIGURE 79: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, RIGHT SIDE (POST-PRR38432) - POST MODIFICATION INSPECTION AT OUTER FASTENER ROWS

[Group 3]379

FIGURE 80: FUSELAGE - SKIN - SKIN PAD-UP AT OVERWING DOOR STRUCTURE, RIGHT SIDE (POST-PRR38432) - POST MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 3]

.384

APPENDIX A: NON DESTRUCTIVE INSPECTION (NDI) AREA387

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 6 of 388 BOEING SERVICE BULLETIN 737-53-1309

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 737-53-1309Original Issue: October 20, 2011 Revision 1: May 22, 2024 ATA System: 5331 SUBJECT: FUSELAGE - Skin - Chem-mill Steps in Crown Skins at Specified Locations - Inspection and Modification This revision includes all pages of the Service Bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-08-08 is related to this Service Bulletin.

The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to this Service Bulletin. The Airworthiness Directive will make the compliance tasks and times given in this Service Bulletin mandatory.

Effects of this Revision on airplanes on which Original Issue was previously done:

None. However, the Boeing compliance recommendation compliance times/intervals have been changed. It is recommended for operators to review and update their maintenance program accordingly.

REASON FOR REVISION This revision is sent to change the compliance times/intervals for the initial inspection, repeat inspections and post modification inspections.

The Service Bulletin was also changed to Special Attention to reduce inspection threshold and intervals. Existing Service Bulletin repeat inspections are not adequate because new fleet data indicates that crack growth is faster and more distributed between tear straps, resulting in longer cracks, than originally observed in the test data that was the basis for the Service Bulletin. Existing Service Bulletin inspection threshold for the pocket-pad chem-mill step may not be adequate because new fleet data indicates that the crack initiation occurs earlier than the Service Bulletin threshold.

These sections were changed:

1. Summary, Background: Updated statement and added Boeing Service Related Problem (SRP) and Boeing Fleet Team Digest (FTD) references.

2. Summary, Compliance: Is updated to show a new Federal Aviation Administration (FAA) Airworthiness Directive number.

3. Paragraph 1.C., Reason: Updated statement and added Boeing Service Related Problem (SRP) and Boeing Fleet Team Digest (FTD) references. Added reason for revision statement.

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 7 of 388

4. Paragraph 1.D., Description: Added the effects of this revision on airplanes on which Original Issue was previously done statement.

5. Paragraph 1.E., Compliance: Updated to show a new Federal Aviation Administration (FAA) Airworthiness Directive number and updated existing compliance tables to new format, changed compliance times and repeat intervals.

6. Paragraph 1.F., Approval: updated statement and added Alternative Method of Compliance (AMOC) statement.

7. Paragraph 1.J.1., Existing Data: Added references to show new Boeing Service Related Problem (SRP), Boeing Fleet Team Digest (FTD), Federal Aviation Administration (FAA) Airworthiness Directive, Engineering Change Memo and 737 Non-Destructive Testing (NDT) Manual.

8. Paragraph 1.M., Software Accomplishment Summary: New section added but not affected.

9. Paragraph 2.C.2., Parts and Materials Supplied by the Operator: updated tables.

10. Paragraph 3.A.,General Information: Added note 12 and 13.

11. Paragraph 3.B.,Work Instructions: Incorporated compliance table changes. Removed references to compliance times in the work instructions.

12. Figure 1: Table is updated.

13. Figures 2, 6, 10, 14, 18, 22, 26, 30, 34, 38, 42, 46, 53, 57, 61, 65, 69, 73, and 77: Added new footnote for alternative Non-Destructive Test (NDT) procedure.

14. Figure 19: Added new note.

15. Figure 54: Updated illustrations and footnotes.

16. Appendix A: Added title.

The data given in Alternative Method of Compliance Notice 737-53-1309 AMOC01 is included in this revision.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes, to show the location of all content changes.

Pages with no vertical lines have no changes.

REVISION HISTORY October 20, 2011Original Issue:

May 22, 2024Revision 1:

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 8 of 388 BOEING SERVICE BULLETIN 737-53-1309

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 737-53-1309Original Issue: October 20, 2011 Revision 1: May 22, 2024 ATA System: 5331 SUBJECT: FUSELAGE - Skin - Chem-mill Steps in Crown Skins at Specified Locations - Inspection and Modification BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND This Service Bulletin is sent to give instructions to inspect the fuselage skin and install modification doublers at specified locations where chem-mill areas are adjacent to non chem-mill areas at antenna and door bearstrap installations. These actions are necessary to find and repair, or prevent fatigue cracking of the skin panel at the specified chem-mill step locations which could result in rapid decompression of the airplane.

Boeing received reports of early fatigue cracks near chem-mill areas on the crown skin panels of 737-300/-400/-500 airplanes. The cracks resulted from high stresses in the areas where chem-mill pockets are adjacent to non chem-mill areas. Since the original issue of this Service Bulletin, 3 cases of suspected fuselage fatigue cracks were reported adjacent to non chem-milled skin bays on 737-700 airplanes with between 40,000 and 43,000 airframe flight cycles.

Boeing had not received reports of fuselage fatigue cracks on 737-600/-700/-700C/-800/-900/-900ER airplanes at the time of the original issue of this Service Bulletin. However, a full scale fatigue test was conducted and the test airplane was inspected for skin cracks at similar structural details and two cracks were found that occurred late in the testing program. The 737-600 crown skin panels are of similar design to those of the 737-300/-400/-500 airplanes.

Boeing Service Related Problem (SRP) 737NG-SRP-53-0370 and 737NG-SRP-53-0626 are related to this Service Bulletin.

Boeing Fleet Team Digest (FTD) 737NG-FTD-53-11001 and 737NG-FTD-53-20003 are related to this Service Bulletin.

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 9 of 388

ACTION (PRR 38945, PRR 39800-026RS) Get external access to the areas of the crown skin at the specified antenna locations, the forward passenger door bearstrap and the emergency exit bearstraps. Do an external detailed inspection and an external Non Destructive Inspection (NDI) for cracking in the fuselage skin along the chem-mill steps at these locations. The NDI methods that can be used are Medium Frequency Eddy Current (MFEC), Magneto Optical Imaging (MOI), C-Scan or Ultrasonic Phased Array (UTPA). At each location, if any crack is found, contact Boeing for further instructions and do the work instructed by Boeing. If no cracking is found, install the modification doublers and fillers or repeat the inspections at the specified intervals given in Paragraph 1.E., Compliance. After accomplishment of the modification, post modification inspections will be necessary.

EFFECTIVITY 737-600 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.

COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-08-08 is related to this Service Bulletin.

The effective date of AD 2013-08-08 is May 24, 2013.

The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to this Service Bulletin. The Airworthiness Directive will make the compliance tasks and times given in this Service Bulletin mandatory.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the inspection, and/or modification procedures given in this Service Bulletin.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION Operator Supplied Parts/Materials.

Refer to Paragraph 2.A., Material - Price and Availability.

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 10 of 388 BOEING SERVICE BULLETIN 737-53-1309

Page 11OCROpen in PDF

BOEING SERVICE BULLETIN 737-53-1309 STA 887 STA 727 STA 000000000 360

DO AN EXTERNAL DETAILED INSPECTION AND AN

EXTERNAL NON DESTRUCTIVE INSPECTION (NDI) S-10R FOR CRACKING IN THE FUSELAGE SKIN ALONG THE

CHEM-MILL STEPS AT THE SPECIFIED LOCATIONS IN

THE CROWN SKIN

INSTALL MODIFICATION FILLERS AND DOUBLERS AT THE CHEM-MILL STEP. DO POST MODIFICATION INSPECTIONS AT ALL MODIFIED LOCATIONS.

STA STA STA STA STA

294.5 312 328 344 360 S-1

• S-2L

- S-3L

EXAMPLE CRACK

• INSPECTION AREA LOOKING INBOARD FWD 2066539

FORWARD ENTRY DOOR AREA PAD-UP SHOWN OTHER LOCATIONS SIMILAR Original Issue: October 20, 2011 Revision 1: May 22, 2024 737-53-1309 Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details 11 of 388

Export Controlled ECCN: 9E991 BOEING PROPRIETARY - See page 1 for details Original Issue: October 20, 2011 737-53-1309Revision 1: May 22, 2024 12 of 388 BOEING SERVICE BULLETIN 737-53-1309

BLANK PAGE

Pages 13–24 of 140