TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1c811fb55d2e6a1dfb8d4d23f5709d98db7679177564308f865a04bb68b0f7ef' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1c811fb55d2e6a1dfb8d4d23f5709d98db7679177564308f865a04bb68b0f7ef' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 737 Service Bulletin
SPECIAL ATTENTION Number: 737-55-1059 Original Issue: September 10, 1998 Revision 1: April 06, 2016 ATA System: 5510 SUBJECT: STABILIZERS - Horizontal Stabilizer - Lower Skin Inspection and Repair Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 1998 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 1 of 85
3.0
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 2 of 85 BOEING SERVICE BULLETIN 737-55-1059
BLANK PAGE
Table of Contents
Revision Transmittal Sheet5
Summary9
1. PLANNING INFORMATION13
A. Effectivity13
1. Airplanes13
2. Spares Affected19
B. Concurrent Requirements19
C. Reason20
D. Description20
E. Compliance21
F. Approval26
G. Manpower26
H. Weight and Balance Changes30
I. Electrical Load Data31
J. References31
1. Existing Data:31
2. Data Supplied with this Service Bulletin:32
3. Installation Drawings Used in the Preparation of this Service Bulletin:32
4. Process Data:32
K. Publications Affected32
L. Interchangeability and Intermixability of Parts33
M. Software Accomplishment Summary33
2. MATERIAL INFORMATION35
A. Material - Price and Availability35
B. Industry Support Information35
C. Parts Necessary for Each Airplane35
1. Kits/Parts:35
2. Parts and Materials Supplied by the Operator:36
3. Parts Modified and Reidentified:37
4. Parts Removed and Not Replaced:37
D. Parts Necessary to Change Spares37
E. Special Tooling - Price and Availability37
F. Special Tooling Necessary to do this Service Bulletin37
3. ACCOMPLISHMENT INSTRUCTIONS39
A. GENERAL INFORMATION39
B. WORK INSTRUCTIONS41
FIGURE 1: LEFT HORIZONTAL STABILIZER LOWER SKIN - DETAILED INSPECTION [Group 1,
Configuration 1]52
FIGURE 2: RIGHT HORIZONTAL STABILIZER LOWER SKIN - DETAILED INSPECTION [Group 1,
Configuration 1]54
FIGURE 3: STOP DRILL REPAIR [Group 1, Configuration 1]56
FIGURE 4: EXTERNAL DOUBLER REPAIR INSTALLATION [Group 1, Configuration 1]57
FIGURE 5: HORIZONTAL STABILIZER LOWER SKIN SRM REPAIR OR EXTERNAL DOUBLER REPAIR
- POST-REPAIR INSPECTION [Group 1, Configuration 2]61
FIGURE 6: LEFT HORIZONTAL STABILIZER LOWER SKIN OF UNREPAIRED AREAS - POST-REPAIR
INSPECTION [Group 1, Configuration 2]63
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 3 of 85 BOEING SERVICE BULLETIN 737-55-1059
FIGURE 7: RIGHT HORIZONTAL STABILIZER LOWER SKIN OF UNREPAIRED AREAS - POST-REPAIR
INSPECTION [Group 1, Configuration 2]65
FIGURE 8: FORWARD FASTENER ROW OF EXTERNAL DOUBLER REPAIR - LOW FREQUENCY EDDY
CURRENT INSPECTION [Group 1, Configuration 2]67
FIGURE 9: CUT OUT REPAIR [Group 1, Configuration 1]70
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 1: LEFT AND RIGHT HORIZONTAL STABILIZER LOWER SKINS THAT DO NOT HAVE A REPAIR INSTALLED –
INSPECTION AND REPAIR [Group 1, Configuration 1]72
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 2: LEFT AND RIGHT
HORIZONTAL STABILIZER LOWER SKINS WITH AN EXISTING REPAIR INSTALLED -
POST-REPAIR INSPECTION AND REPAIR [Group 1, Configuration 2]77
APPENDIX C: INBOARD SKIN SPLICE REPAIRS - JACKING AND SHORING81
APPENDIX D: INBOARD SKIN SPLICE REPAIRS - JACKS AND SHORING SUPPORT - REMOVAL . . 82
APPENDIX E: OUTBOARD SKIN SPLICE REPAIRS - JACKING AND SHORING83
APPENDIX F: OUTBOARD SKIN SPLICE REPAIRS - JACKS AND SHORING SUPPORT - REMOVAL . 84
APPENDIX G: BOEING PART DEMAND INTENT [Group 1, Configuration 1]85
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 4 of 85 BOEING SERVICE BULLETIN 737-55-1059
Commercial Airplanes 737 Service Bulletin
SPECIAL ATTENTION Revision Transmittal SheetNumber: 737-55-1059Original Issue: September 10, 1998 Revision 1: April 06, 2016 ATA System: 5510 SUBJECT: STABILIZERS - Horizontal Stabilizer - Lower Skin Inspection and Repair This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION Airplane line numbers 3006 - 3132 were added to this service bulletin effectivity.
Effects of this Revision on airplanes on which the Original Issue was previously done:
ActionConditionGroup Do detailed inspections of the horizontal stabilizer lower skin for any crack.
Left and right horizontal stabilizer lower skins in Zone-A to Zone-F that do not have a repair installed.
Group 1, Configuration 1 Do post-repair inspections of the horizontal stabilizer lower skin for any crack.
Left and right horizontal stabilizer lower skins in Zone-A to Zone-F with an existing repair, excluding Boeing approved skin splice repairs.
Group 1, Configuration 2
REASON FOR REVISION This revision is sent to introduce new repeat inspections for any crack in the horizontal stabilizer lower skin, an updated external doubler repair, a new preventive modification, a new permanent skin splice repair and a new Top Kit.
These sections were changed:
1. In Background, in the Summary section, added new information and a Summary Evaluation Table.
2. In Action, in the Summary section, changed instructions.
3. In Effectivity, in the Summary section, updated reference.
4. In Compliance, in the Summary section, removed information and added reference.
5. In Industry Support Information, in the Summary section, added warranty information.
6. In Manpower, in the Summary section, removed paragraph and added reference.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 5 of 85
7. In Material Information, in the Summary section, changed supplier information, added reference and survey information.
8. In Summary illustration, in the Summary section, changed inspection area, added skin replacement area and changed instructions.
9. In Paragraph 1.A., Effectivity, added line numbers 3006-3132 to Group 1, added note and divided the effectivity into configurations.
10. In Paragraph 1.C., Reason, added new information and reason for this revision.
11. In Paragraph 1.D., Description, changed instructions and added maintenance zone table.
12. In Paragraph 1.E., Compliance, added new repeat inspection and corrective action information in tables.
13. In Paragraph 1.F., Approval, added approvals from European Aviation Safety Agency and Joint Aviation Authorities.
14. In Paragraph 1.G., Manpower, updated information and added tables for new repairs, new preventive modification, post-repair inspection and open hole inspection.
15. In Paragraph 1.H., Weight and Balance Changes, removed table for a doubler installation, added table for new permanent skin splice repairs and preventive modification.
16. In Paragraph 1.J.1., References, updated existing data.
17. In Paragraph 1.J.2., Data Supplied with this Service Bulletin, added drawings supplied with this service bulletin.
18. In Paragraph 1.K.1., Publications, added affected publication.
19. In Paragraph 1.K.2., Damage Tolerance Based Structural Inspections, added effects and reference.
20. In Paragraph 1.L., Interchangeability and Intermixability of Parts, added effect on parts.
21. In Paragraph 1.M., Software Accomplishment Summary, added effect.
22. In Paragraph 2.A., Material - Price and Availability, removed old Top Kits, added new Top Kit, revised price.
23. In Paragraph 2.B., Industry Support Information, added warranty information.
24. In Paragraph 2.C., Parts Necessary for Each Airplane, updated the Kits/Parts table and the Parts and Materials Supplied by the Operator table.
25. In Paragraph 3.A., General Information, revised the general notes in accordance with new requirements and added terminating actions.
26. In Paragraph 3.B., Work Instructions, removed the permanent 0.063 inch doubler installation and repair, added repairs, preventive modification, post-repair inspection and open hole inspection.
27. In Figure 1, inspections area extended and limited to left horizontal stabilizer lower skin only, additional optional inspections added.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 6 of 85 BOEING SERVICE BULLETIN 737-55-1059
28. Figure 2, added new figure for inspections.
29. Figure 3, separated repairs and moved to correct sequence.
30. Figure 4, changed fastener codes and added views.
31. In Figure 5, added post-repair inspection.
32. In Figure 6, added post-repair inspection of unrepaired bays on left horizontal stabilizer lower skin.
33. In Figure 7, added post-repair inspection of unrepaired bays on right horizontal stabilizer lower skin.
34. In Figure 8, added inspection of forward fastener row of external doubler repair.
35. In Figure 9, added repair as a separate figure.
36. Appendices A and B, added logic diagrams for compliance.
37. Appendix C, added jacking and shoring instructions for inboard skin splice repair.
38. Appendix D, added jacks and shoring support removal instructions for inboard skin splice repair.
39. Appendix E, added jacking and shoring instructions for outboard skin splice repair.
40. Appendix F, added jacks and shoring support removal instructions for outboard skin splice repair.
41. Appendix G, added Boeing Part Demand Intent.
The data given in Information Notice 737-55-1059 IN 01 and IN 02 is included in this revision.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY September 10, 1998Original Issue:
April 06, 2016Revision 1:
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 7 of 85 BOEING SERVICE BULLETIN 737-55-1059
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 8 of 85 BOEING SERVICE BULLETIN 737-55-1059
BLANK PAGE
Commercial Airplanes 737 Service Bulletin
SPECIAL ATTENTION SummaryNumber: 737-55-1059Original Issue: September 10, 1998 Revision 1: April 06, 2016 ATA System: 5510 SUBJECT: STABILIZERS - Horizontal Stabilizer - Lower Skin Inspection and Repair BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS None.
BACKGROUND Accomplishment of the work in this service bulletin will make sure that any crack found on the lower skins of the horizontal stabilizer is detected and repaired. If the work given in this service bulletin is not accomplished, a crack in the lower skin of the horizontal stabilizer may go undetected and grow in length. An undetected crack and continuous operation of the airplane will cause reduced local stiffness of the stabilizer which can cause heavy vibration leading to loss of structural integrity.
Nearly ninety cracks have been reported in horizontal stabilizer lower skins with most of them occurring between Stabilizer Station (SSTA) 111.10 and 166.30. Ten operators reported cracks on eighteen airplanes outside this range with fourteen of them inboard of SSTA 111.10. The cracks range in length from 0.25 inch to 3.75 inch and the airplanes had between 12,670 and 69,569 flight cycles. The cracks started on the outer surface of the skin where the chem-mill edge aligns with the edge of the lower flange of the rear spar. The cracks grew parallel to the rear spar. High secondary bending stresses due to compression buckling of the skins and sonic fatigue can cause the cracks to grow. Cracks also start from the fastener line nearest the chem-mill step. The cracks were discovered during regular, scheduled maintenance inspections. Installation of new, non-chem milled skin panels and an external doubler section have been used successfully over a number of years without reports of additional cracking.
Boeing Structural Item Interim Advisory (SIIA) SIIA 737-250 is related to this service bulletin.
Boeing Service Related Problem (SRP) 737-SRP-55-0014 and 737-SRP-55-0039 are related to this service bulletin.
Boeing Fleet Team Digest (FTD) 737 FTD 55-06003 is related to this service bulletin.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 9 of 85
This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.
ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedNoSpares Affected Paragraph 1.E., Compliance and Paragraph
1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedNoPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsYesKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Parts/Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION Group 1, Configuration 1:
Do a detailed inspection of left and right side lower skins of the horizontal stabilizers between SSTA 83.50 and SSTA 249.10 for any crack. If any crack is found between SSTA 83.50 and SSTA 180.00, do the skin splice repair and end inspections or install a Structural Repair Manual (SRM) repair or an external repair doubler and do post repair inspections. SRM repair installation is an option for any crack found between SSTA 83.50 and SSTA 157.10. External repair doubler installation is an option for any crack found between SSTA 111.10 and SSTA 166.30. If any crack is found between SSTA 180.00 and SSTA 249.10, contact The Boeing Company for repair instructions and do the repair. If no crack is found, continue inspections until the skin splice repair is done or do a preventive modification to end inspections between SSTA 83.50 and SSTA 101.90 only.
Group 1, Configuration 2:
Do post repair inspections of left and right side lower skins of the horizontal stabilizers between SSTA 83.50 and SSTA 249.10 for any crack. If any crack is found between SSTA 83.50 and SSTA 180.00, do the skin splice repair and end inspections. If any crack is found between SSTA 180.00 and SSTA 249.10, contact The Boeing Company for repair instructions and do the repair. If no crack is found between SSTA 83.50 and SSTA 180.00, continue post repair inspections until the skin splice repair is done. If no crack is found between SSTA 180.00 and SSTA 249.10, repeat post repair inspections.
EFFECTIVITY All 737-300/-400/-500 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 10 of 85 BOEING SERVICE BULLETIN 737-55-1059
COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.
Refer to Paragraph 1.E., Compliance .
INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the inspection and repair procedures given in this service bulletin.
MANPOWER Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Operators are encouraged to complete the survey provided in APPENDIX G of this service bulletin to help Boeing predict the quantity and timing of the Boeing Supplied Kits/Parts.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 10, 1998 737-55-1059Revision 1: April 06, 2016 11 of 85 BOEING SERVICE BULLETIN 737-55-1059
BOEING SERVICE BULLETIN 737-55-1059
DO A DETAILED INSPECTION OF LEFT AND RIGHT SIDE
LOWER SKINS OF THE HORIZONTAL STABILIZERS FOR ANY CRACK. IF ANY CRACK IS FOUND DO A SKIN
SPLICE REPAIR AND END INSPECTION OR, INSTALL A
SRM REPAIR OR AN EXTERNAL DOUBLER REPAIR AND DO POST REPAIR INSPECTIONS. IF NO CRACK IS FOUND,
REPEAT INSPECT OR DO SKIN SPLICE REPAIRS OR DO A PREVENTIVE MODIFICATION TO END INSPECTIONS.
RIGHT STABILIZER ZONE-B ZONE-A LEFT STABILIZER
ZONE-D ZONE-C FRONT SPAR
ZONE-F ZONE-E SSTA 83.50 SSTA 105.70 REAR SPAR SSTA 180.00 FWD
DETAILED INSPECTION AREA SSTA 249.10 HORIZONTAL STABILIZER LOWER SKIN LOOKING UP S45206 Original Issue: September 10, 1998 Revision 1: April 06, 2016 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 737-55-1059 Work - See page 1 for details. 12 of 85