Copy · Boeing - Service Bulletin · 135 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2009-0288; AD 2013-08-18 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'eceae11611dab8cfc603fb3e46a3c79917535e389c7bebd052d671a32f6d6033'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-57-1293 Original Issue: November 13, 2008 Revision 3: December 14, 2012 ATA System: 5740 SUBJECT: WINGS - Leading Edge and Leading Edge Devices - Fuel Drain Path Modification Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2008 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner™, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing. BOEING is a trademark of Boeing Management Company.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 1 of 135

5.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 2 of 135 BOEING SERVICE BULLETIN 737-57-1293

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary7

1. PLANNING INFORMATION ........................................ 1 1 A. Effectivity ............................................... 1 1

1. Airplanes ............................................ 1 1

2. Spares Affected ........................................ 2 8 B. Concurrent Requirements ...................................... 2 8 C. Reason ................................................ 2 8 D. Description .............................................. 2 9 E. Compliance .............................................. 3 0 F. Approval ............................................... 3 0 G. Manpower .............................................. 3 1 H. Weight and Balance Changes .................................... 3 3 I. Electrical Load Data ......................................... 3 4 J. References .............................................. 3 4

1. Existing Data: ......................................... 3 4

2. Data Supplied with this Service Bulletin: ........................... 3 4

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 4 K. Publications Affected ........................................ 3 5 L. Interchangeability and Intermixability of Parts ........................... 3 5 M. Software Accomplishment Summary ................................ 3 5

2. MATERIAL INFORMATION ........................................ 3 7 A. Material - Price and Availability ................................... 3 7 B. Industry Support Information .................................... 3 8 C. Parts Necessary for Each Airplane ................................. 3 8

1. Kits/Parts: ........................................... 3 8

2. Parts and Materials Supplied by the Operator: ........................ 3 9

3. Parts Modified and Reidentified: ............................... 4 1

4. Parts Removed and Not Replaced: .............................. 4 3 D. Parts Necessary to Change Spares ................................. 4 3 E. Special Tooling - Price and Availability ............................... 4 3 F. Special Tooling Necessary to do this Service Bulletin ....................... 4 3

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 5 A. GENERAL INFORMATION ..................................... 4 5 B. WORK INSTRUCTIONS ....................................... 4 6 FIGURE 1: LEFT WING - LEADING EDGE SLAT TRACK RIBS - ACCESS [Group 1, Configuration 1] . 52 FIGURE 2: LEFT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - ACCESS [Group 2, Configuration 1] ................................... 5 4 FIGURE 3: LEFT WING - PARTING AGENT AND SEALANT REMOVAL, AND INSPECTION OF THE BLOWOUT DOOR HINGE [Group 2, Configuration 1] .................... 5 6 FIGURE 4: LEFT WING - BLOWOUT DOOR HINGE TRIM [Group 1-2, Configuration 1] ........ 5 9 FIGURE 5: LEFT WING - OUTBOARD STRAKELET BOX - MODIFICATION [Group 1, Configuration 1] .................................................. 6 2 FIGURE 6: LEFT WING - FUEL SHUTOFF VALVE ACCESS DOOR - SEAL REPLACEMENT [Group 1, Configuration 1] ......................................... 6 8 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 3 of 135 BOEING SERVICE BULLETIN 737-57-1293

FIGURE 7: LEFT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - SEALANT APPLICATION [Group 1, Configuration 1] .......................... 7 3 FIGURE 8: LEFT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - SEALANT APPLICATION [Group 2, Configuration 1] .......................... 7 8 FIGURE 9: LEFT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - LEAK TEST [Group 1-2] ........................................... 8 2 FIGURE 10: LEFT WING - LEADING EDGE SLAT TRACK RIBS - SEALANT APPLICATION [Group 1, Configuration 1] ......................................... 8 4 FIGURE 11: LEFT WING - LEADING EDGE SLAT TRACK RIBS - CLOSE ACCESS [Group 1, Configuration 1 ] ................................................ 8 7 FIGURE 12: LEFT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - CLOSE ACCESS [Group 2, Configuration 1] .............................. 8 9 FIGURE 13: RIGHT WING - LEADING EDGE SLAT TRACK RIBS - ACCESS [Group 1, Configuration 1] .................................................. 9 1 FIGURE 14: RIGHT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - ACCESS [Group 2, Configuration 1] ................................... 9 3 FIGURE 15: RIGHT WING - PARTING AGENT AND SEALANT REMOVAL, AND INSPECTION OF THE BLOWOUT DOOR HINGE [Group 2, Configuration 1] .................... 9 5 FIGURE 16: RIGHT WING - BLOWOUT DOOR HINGE TRIM [Group 1-2, Configuration 1] ....... 9 8 FIGURE 17: RIGHT WING - OUTBOARD STRAKELET BOX - MODIFICATION [Group 1, Configuration 1] ................................................. 1 0 1 FIGURE 18: RIGHT WING - FUEL SHUTOFF VALVE ACCESS DOOR - SEAL REPLACEMENT [Group 1, Configuration 1] ........................................ 1 0 7 FIGURE 19: RIGHT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - SEALANT APPLICATION [Group 1, Configuration 1] .......................... 1 1 2 FIGURE 20: RIGHT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - SEALANT APPLICATION [Group 2, Configuration 1] .......................... 1 1 7 FIGURE 21: RIGHT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - LEAK TEST [Group 1-2] ....................................... 1 2 1 FIGURE 22: RIGHT WING - LEADING EDGE SLAT TRACK RIBS - SEALANT APPLICATION [Group 1, Configuration 1] ........................................ 1 2 3 FIGURE 23: RIGHT WING - LEADING EDGE SLAT TRACK RIBS - CLOSE ACCESS [Group 1, Configuration 1 ] ................................................ 1 2 6 FIGURE 24: RIGHT WING - BLOWOUT DOOR AND FUEL SHUTOFF VALVE ACCESS DOOR - CLOSE ACCESS [Group 2, Configuration 1] ............................. 1 2 8 FIGURE 25: LEFT WING - FUEL SHUTOFF VALVE ACCESS DOOR - SEAL DISK INSTALLATION . 130 FIGURE 26: RIGHT WING - FUEL SHUTOFF VALVE ACCESS DOOR - SEAL DISK INSTALLATION . 133 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 4 of 135 BOEING SERVICE BULLETIN 737-57-1293

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 737-57-1293Original Issue: November 13, 2008 Revision 3: December 14, 2012 ATA System: 5740 SUBJECT: WINGS - Leading Edge and Leading Edge Devices - Fuel Drain Path Modification This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION No more work is necessary on the airplane(s) changed in accordance with Revision 2 of this service bulletin.

Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2008-NM-214-AD, is related to this service bulletin.

REASON FOR REVISION This revision is sent to clarify the requirements for the reidentification of parts and assemblies changed by this service bulletin.

The data given in Information Notice 737-57-1293 IN 04 and 737-57-1293 IN 05 are included in this revision.

These sections were changed:

1. Added Paragraph 1.M., Software Accomplishment Summary.

2. Paragraph 2.B., Industry Support Information, changed warranty statement.

3. Paragraph 2.C.1., Parts Necessary for Each Airplane, added new footnote and changed group applicability heading.

4. Paragraph 2.C.2., Parts and Materials Supplied by the Operator, added new footnotes.

5. Paragraph 2.C.3., Parts Modified and Reidentified, updated list of parts.

6. Paragraph 2.D., Parts Necessary to Change Spares, added seal retainer.

7. Paragraph 3.B., Work Instructions, reorganized existing work instructions into group-configuration sets and changed applicable references.

8. Figures 4 and 16, changed part numbers and footnote.

9. Figures 5 and 17, added optional part number, changed part numbers and footnotes.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 5 of 135

10. Figures 6 and 18, changed part numbers.

11. Figure 11, changed part number.

12. Figures 25 and 26, added button callout on art, changed quantity and footnotes.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY November 13, 2008Original Issue:

January 11, 2010Revision 1:

September 28, 2011Revision 2:

December 14, 2012Revision 3:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 6 of 135 BOEING SERVICE BULLETIN 737-57-1293

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 737-57-1293Original Issue: November 13, 2008 Revision 3: December 14, 2012 ATA System: 5740 SUBJECT: WINGS - Leading Edge and Leading Edge Devices - Fuel Drain Path Modification BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND This service bulletin gives instructions to modify the fluid drain path in the wing leading edge area, forward of the wing front spar. If this service bulletin is not incorporated, flammable fluids accumulating in the wing leading edge may drain inboard and onto the engine exhaust nozzle, which could result in a fire.

Boeing has received a report of leaking fuel from the wing leading edge area at the inboard end of the number 5 leading edge slat. The leak was discovered during a post flight inspection on a 737 airplane with a fuel quantity of over 2500 pounds. Subsequent investigation found that the leak occurred in an area of the front spar that does not have a proper drain path. This led to the fuel draining onto the engine exhaust nozzle. The leak appears to have been caused by loose downstop assembly hardware of the slat track down stop and is the subject of Boeing Service Letter 737-SL-57-084.

Group 2 airplanes had the wing leading edge drain path incorporated in production, however the parting agent and Formed-In- Place gasket on the blowout door and fuel shutoff valve access door needs to be replaced and the new seal disks need to be installed on the latches in the fuel shutoff valve access door. Group 3 airplanes had the wing leading edge drain path incorporated in production and had the blowout doors and fuel shutoff valve access doors sealed properly in production, but they need the new seal disks installed on the latches in the fuel shutoff valve access doors.

Boeing Service Related Problem (SRP) 737NG-SRP-28-0110 and 737NG-SRP-57-0248 are related to this service bulletin.

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedYesSpares Affected Paragraph 1.E., Compliance and Paragraph

1.F., Approval YesAD Related Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 7 of 135

ReferenceAffectedPlanning Data Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsYesKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION (PRR 38275-181S, PRR 38275-113S) Group 1, Configuration 1:

1. Open the blowout door and the fuel shutoff valve access door. Remove and keep 13 wing lower leading edge panels from slat station (SS) 26 to slat station (SS) 500 in the left and right wings. Remove wing upper leading edge panels, if necessary, to help install the flame arrestor tube.

2. Apply sealant to the cavities between the inboard slat track ribs and leading edge lower panels at SS

47.69, 122.69, 163.95, 240.95, 282.91, 362.51 and 409.09 in the left and right wings.

3. At the outboard leading edge strakelet box, install a flame arrestor tube through the vapor barrier rib to direct fluids to the strut drain system. Apply sealant to create a form-in-place gasket at the blowout door located under the strakelet box to prevent fluids from leaking onto the engine exhaust nozzle.

Replace the existing seal in the fuel shut off valve access door with a bulb seal to prevent flammable fluid leakage onto the engine exhaust nozzle.

4. Install a rubber seal disk under the head of the smaller latch button at each latch location on the fuel shutoff valve access doors.

5. Close the fuel shutoff valve access door and the blowout door and do a leak test. Install all lower leading edge access panels, and any upper leading edge panels that may have been removed.

Group 2, Configuration 1:

1. Open the blowout door and the fuel shutoff valve access door in the left and right wings. Remove and keep the lower leading edge access panel immediately outboard of the fuel shutoff valve access door in the left and right wings. Remove the parting agent and sealant at these locations and install new sealant using improved parting agent.

2. Install a rubber seal disk under the head of the smaller latch button at each latch location on the fuel shutoff valve access doors.

3. Close the blowout door and fuel shutoff valve access door and do a leak test. Install the lower leading edge access panel.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 8 of 135 BOEING SERVICE BULLETIN 737-57-1293

Group 1-2, Configuration 2; Group 3:

1. Install a rubber seal disk under the head of the smaller latch button at each latch location on the fuel shutoff valve access doors.

EFFECTIVITY 737-600, -700, -700C, -800, -900, -900ER airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.

COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2008-NM-214-AD, is related to this service bulletin.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of April 28, 2006. Please refer to Paragraph

2.B., Industry Support Information.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION Boeing Supplied Kits/Parts.

Refer to Paragraph 2.A., Material - Price and Availability.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 9 of 135 BOEING SERVICE BULLETIN 737-57-1293

Page 10OCROpen in PDF

BOEING SERVICE BULLETIN 737-57-1293

INSTALL A FLAME ARRESTOR TUBE THROUGH THE VAPOR BARRIER RIB. APPLY SEALANT TO THE BLOW OUT

DOOR, REPLACE THE SEAL IN THE FUEL SHUT OFF ACCESS PANEL, AND INSTALL SEAL DISK.

SEE 00000000000 SEE 0...

UPPER SKIN PANEL

INBOARD RIB

ASSEMBLY

APPLY SEALANT

BETWEEN ACCESS PANELS FRONT

AND INBOARD SLAT SPAR

TRACK RIB ASSEMBLY

UPPER SKIN

PANEL INBD

FILL MACHINE GAP ON FUDI

INBOARD RIB ASSEMBLY

WITH SEALANT

DRAIN PATH

OUTBOARD RIB ASSEMBLY CONLY BASE 1343463

SHOWN FOR CLARITY) Original Issue: November 13, 2008 Revision 3: December 14, 2012 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 737-57-1293 Work - See page 1 for detalls. 10 of 135

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-57-1293 Original Issue: November 13, 2008 Revision 3: December 14, 2012 ATA System: 5740 SUBJECT: WINGS - Leading Edge and Leading Edge Devices - Fuel Drain Path Modification BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

1. PLANNING INFORMATION A. Effectivity

1. Airplanes Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

This service bulletin is for the airplanes shown below. An equivalent change is on subsequent production airplanes. Refer to PRR 38275-113S and PRR 38275-181S for data about this change.

DESCRIPTIONCONFIGURATIONGROUP 737-600, -700, -700C, -800 and -900 airplanes Line Numbers 1 - 1980, 1982 - 2092 and 2094 - 2130.

-1 Airplanes that have not incorporated the original issue or Revision 1 of the bulletin.

1 Airplanes that have incorporated the original issue or Revision 1 of the bulletin.

2 737-700, -700C, -800 and -900ER airplanes Line Numbers 2131 - 2437 delivered with a modified fuel drain path in the wing leading edge.

-2 Airplanes that have not incorporated the original issue or Revision 1 of the bulletin.

1 Airplanes that have incorporated the original issue or Revision 1 of the bulletin.

2 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 11 of 135

DESCRIPTIONCONFIGURATIONGROUP 737-700, -700C, -800 and -900ER airplanes Line Numbers 2438-3833 that have had the intent of Revision 1 of the bulletin incorporated in production.

-3 Airplane Models:

737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER GroupVariable Number 1YA001 - YA099 1YA101 - YA199 1YA201 - YA211 1YA221 1YA231 - YA242 1YA251 - YA256 1YA271 - YA272 1YA291 1YA301 - YA302 1YA311 - YA314 1YA321 - YA323 1YA336 - YA345 1YA351 1YA356 - YA357 1YA366 - YA367 1YA371 - YA377 1YA501 - YA536 1YA541 - YA552 1YA571 - YA578 1YA601 - YA615 1YA621 - YA622 1YA626 - YA631 1YA635 - YA636 1YA641 - YA642 1YA645 - YA650 1YA656 - YA659 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 13, 2008 737-57-1293Revision 3: December 14, 2012 12 of 135 BOEING SERVICE BULLETIN 737-57-1293

Pages 13–24 of 135