Copy · U.S. DOT/FAA - SB-757-54-0049-02 · 78 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0809; AD 2013-04-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '99a88085a6caf581b174263c4666d167cf6a39cfd686324a93c0aab85d14a357'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 757 Service Bulletin

SPECIAL ATTENTION Number: 757-54-0049 Original Issue: July 16, 2007 Revision 2: July 27, 2011 ATA System: 5451 SUBJECT: NACELLES/PYLONS - Nacelle Strut - Thrust Reverser Aft Hinge Fitting Modification

- Rolls Royce RB211-535E Engines Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 2007 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.

This document includes proprietary information owned by The Boeing Company and/or one or more third parties.

Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 1 of 78

3.0

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 2 of 78 BOEING SERVICE BULLETIN 757-54-0049

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary7

1. PLANNING INFORMATION ........................................ 1 1 A. Effectivity ............................................... 1 1

1. Airplanes ............................................ 1 1

2. Spares Affected ........................................ 1 4 B. Concurrent Requirements ...................................... 1 4 C. Reason ................................................ 1 4 D. Description .............................................. 1 5 E. Compliance .............................................. 1 6 F. Approval ............................................... 1 8 G. Manpower .............................................. 1 9 H. Weight and Balance Changes .................................... 2 0 I. Electrical Load Data ......................................... 2 0 J. References .............................................. 2 0

1. Existing Data: ......................................... 2 0

2. Data supplied with this Service Bulletin: ........................... 2 1

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 1 K. Publications Affected ........................................ 2 1 L. Interchangeability and Intermixability of Parts ........................... 2 1

2. MATERIAL INFORMATION ........................................ 2 3 A. Material - Price and Availability ................................... 2 3 B. Industry Support Information .................................... 2 4 C. Parts Necessary For Each Airplane ................................. 2 4

1. Kits/Parts: ........................................... 2 4

2. Parts and Materials Supplied by the Operator: ........................ 2 5

3. Parts Modified and Reidentified: ............................... 2 5

4. Parts Removed and Not Replaced: .............................. 2 6 D. Parts Necessary to Change Spares ................................. 2 6 E. Special Tooling - Price and Availability ............................... 2 6 F. Special Tooling Necessary to do this Service Bulletin ....................... 2 6

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 7 A. GENERAL INFORMATION ..................................... 2 7 B. WORK INSTRUCTIONS ....................................... 2 9 FIGURE 1: ENGINE NUMBER 1 - THRUST REVERSER AFT HINGE FITTING - DETAILED INSPECTION [Group 1, Configuration 1] ................................... 3 4 FIGURE 2: ENGINE NUMBER 2 - THRUST REVERSER AFT HINGE FITTING - DETAILED INSPECTION [Group 1, Configuration 1] ................................... 3 7 FIGURE 3: ENGINE NUMBER 1 - THRUST REVERSER AFT HINGE FITTING - TRIM [Group 1, Configuration 1] ......................................... 4 0 FIGURE 4: ENGINE NUMBER 2 - THRUST REVERSER AFT HINGE FITTING - TRIM [Group 1, Configuration 1] ......................................... 4 4 FIGURE 5: ENGINE NUMBER 1 - THRUST REVERSER AFT HINGE FITTING LOWER FASTENER HOLES

- OVERSIZE AND HIGH FREQUENCY EDDY CURRENT INSPECTION [Group 1, Configuration 1 ] ................................................ 4 8

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 3 of 78 BOEING SERVICE BULLETIN 757-54-0049

FIGURE 6: ENGINE NUMBER 2 - THRUST REVERSER AFT HINGE FITTING LOWER FASTENER HOLES

- OVERSIZE AND HIGH FREQUENCY EDDY CURRENT INSPECTION [Group 1, Configuration 1 ] ................................................ 5 1 FIGURE 7: ENGINE NUMBER 1 - THRUST REVERSER AFT HINGE FITTING LOWER FASTENER HOLES

- FASTENER INSTALLATION [Group 1, Configuration 1] .................. 5 4 FIGURE 8: ENGINE NUMBER 2 - THRUST REVERSER AFT HINGE FITTING LOWER FASTENER HOLES

- FASTENER INSTALLATION [Group 1, Configuration 1] .................. 5 7 FIGURE 9: ENGINE NUMBER 1 - THRUST REVERSER AFT HINGE FITTING UPPER FASTENER HOLES

- OVERSIZE AND HIGH FREQUENCY EDDY CURRENT INSPECTION [Group 1, Configuration 1 ] ................................................ 6 0 FIGURE 10: ENGINE NUMBER 2 - THRUST REVERSER AFT HINGE FITTING UPPER FASTENER HOLES

- OVERSIZE AND HIGH FREQUENCY EDDY CURRENT INSPECTION [Group 1, Configuration 1 ] ................................................ 6 3 FIGURE 11: ENGINE NUMBER 1 - THRUST REVERSER AFT HINGE FITTING UPPER FASTENER HOLES

- FASTENER INSTALLATION ................................. 6 6 FIGURE 12: ENGINE NUMBER 2 - THRUST REVERSER AFT HINGE FITTING UPPER FASTENER HOLES

- FASTENER INSTALLATION ................................. 6 9 FIGURE 13: ENGINE NUMBER 1 - THRUST REVERSER AFT HINGE FITTING - REMOVAL AND INTERIM INSTALLATION [Group 1, Configuration 1] .......................... 7 2 FIGURE 14: ENGINE NUMBER 2 - THRUST REVERSER AFT HINGE FITTING - REMOVAL AND INTERIM INSTALLATION [Group 1, Configuration 1] .......................... 7 5 APPENDIX A: AFT HINGE FITTING FASTENER STACKUP ........................ 7 8

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 4 of 78 BOEING SERVICE BULLETIN 757-54-0049

Commercial Airplanes 757 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 757-54-0049Original Issue: July 16, 2007 Revision 2: July 27, 2011 ATA System: 5451 SUBJECT: NACELLES/PYLONS - Nacelle Strut - Thrust Reverser Aft Hinge Fitting Modification

- Rolls Royce RB211-535E Engines This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION No more work is necessary on the airplane(s) changed in accordance with Revision 1 of this service bulletin.

Federal Aviation Administration (FAA) Airworthiness Directive AD 2008-13-20 is related to this service bulletin.

REASON FOR REVISION This revision is sent to inform operators that an aft hinge fitting designed with the trim already in it, is being made available as an option to trimming an existing or new hinge fitting.

These sections were changed:

1. Paragraph 2.C.2., Parts and Materials Supplied by the Operator, added optional 311N5148-4 Hinge Fitting and optional replacement shim.

2. Paragraph 3.A., General Information, updated the general notes.

3. Paragraph 3.B., Work Instructions, Part II - Inspection, added optional 311N5148-4 fitting to step 1.a,

1.e.(2)(b), 2.a., and 2.e.(2)(b).

4. Paragraph 3.B. Work Instructions, Part III - Preventive Modification, added option to use a new 311N5148-4 fitting designed with the trim already in it, under Step 4.b. Option 2, substeps (2) and (5).

5. Figures 13 and 14, added optional 311N5148-4 fitting to step 6, added footnote (c) with option to use BMS 5-95 instead of BMS 5-45, and added footnote (d) with option to install a replacement shim.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 5 of 78

REVISION HISTORY July 16, 2007Original Issue:

September 23, 2009Revision 1:

July 27, 2011Revision 2:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 6 of 78 BOEING SERVICE BULLETIN 757-54-0049

Commercial Airplanes 757 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 757-54-0049Original Issue: July 16, 2007 Revision 2: July 27, 2011 ATA System: 5451 SUBJECT: NACELLES/PYLONS - Nacelle Strut - Thrust Reverser Aft Hinge Fitting Modification

- Rolls Royce RB211-535E Engines BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS You cannot make the changes given in this service bulletin unless the changes given in Service Bulletin 757-54-0015 R3 are made prior to or concurrent with this service bulletin. The 757-54-0015 service bulletin replaced an older aft hinge fitting and attachment bolts with the current part numbers on airplanes line numbers through 241. The changes given in Service Bulletin 757-54-0015 were made on airplanes after line number 241, before delivery.

BACKGROUND This service bulletin gives instructions to do a detailed inspection and preventive modification on the thrust reverser aft hinge fittings, and hinge fitting attachment bolts. Attachment bolts have been reported to fail at the thrust reverser aft hinge fittings. The hinge has integral fail-safe features, but loss of the entire four bolt pattern constitutes complete loss of the load path. Loss of the load path could result in the departure of the thrust reverser from the airplane which could result in damage to the airplane and hazards to persons or property on the ground.

Boeing has received 13 reports of 14 separate incidents of bolt failure at the thrust reverser aft hinge fittings.

All of the reported incidents occurred on airplanes with Rolls Royce RB211-535E engines. Of the 14 incidents there were 9 hinges with 1 out of 4 bolts failed, 2 hinges with 2 out of 4 bolts failed, and 3 hinges with 3 out of 4 bolts failed.

The possible causes of the bolt failure can be attributed to high operational loads, contact loads caused by possible interference between the thrust reverser hinge and the hinge beam, and the 4 attachment bolts are installed with washers that can ride the radius of the hinge fitting spotface.

As a part of a service bulletin validation program, this change was completed on airplane NT744 by Service Bulletin 757-54-0049 Validation Copy 01 before the initial release of this service bulletin. The change completed on airplane NT744 by Service Bulletin 757-54-0049 Validation Copy 01 is equivalent to the initial release of this service bulletin.

Boeing Service Related Problem (SRP) 757-SRP-54-0098 is related to this service bulletin.

ACTION (PRR 55029-R) (PRR 54530-267RS)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 7 of 78

Inspections:

Get Access to the thrust reverser aft hinge fittings. Do a detailed inspection of the aft hinge fittings and the eight attachment bolts for signs of damage. If any damage to the aft hinge fitting and/or attachment bolts is found, the damage must be corrected before further flight and the preventive modification must be scheduled. For Group 1, Configuration 2 airplanes, do a detailed inspection of washer stackup. If the stackup is incorrect, the washers must be removed and reinstalled.

Preventive Modification:

Operators may do the preventive modification. After the preventive modification is accomplished it is no longer necessary to do the repeat inspections shown in this service bulletin. Get Access to the thrust reverser aft hinge fittings. Remove the thrust reverser C-ducts. Trim the aft hinge fitting lugs or install a fitting designed with the trim already in it, to clear possible contact with the hinge beam. Remove the four attachment bolts on each aft hinge fitting, high frequency eddy current (HFEC) inspect the fastener holes and replace with new and improved bolts, washers and nuts. Refit thrust reversers and return airplane to a serviceable condition.

The related 757-300 bulletin is Service Bulletin 757-54-0050.

EFFECTIVITY 757-200/ 200CB/ 200PF airplanes with Rolls Royce RB211-535E engines. Refer to Paragraph 1.A.1.

COMPLIANCE Refer to Service Bulletin Paragraph 1.E for compliance.

Federal Aviation Administration (FAA) Airworthiness Directive FAA AD 2008-13-20 is related to this service bulletin.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of October 17, 2003. Please refer to Paragraph 2.B., Industry Support Information.

MANPOWER Refer to Service Bulletin Paragraph 1.G Manpower.

MATERIAL INFORMATION Boeing Supplied Kits/Parts.

Refer to Paragraph 2.A., Material - Price and Availability.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 8 of 78 BOEING SERVICE BULLETIN 757-54-0049

Page 9OCROpen in PDF

BOEING SERVICE BULLETIN 757-54-0049 -DO A DETAILED INSPECTION ON THE THRUST

REVERSER AFT HINGE FITTINGS AND ATTACH

BOLTS, AND HFEC THE ATTACH BOLT FASTENER HOLES FOR DAMAGE.

-REPAIR OR MODIFY AFT HINGE FITTING IF LEFT ENGINE SHOWN DAMAGE IS FOUND.

RIGHT ENGINE SIMILAR D37474 Original Issue: July 16, 2007 Revision 2: July 27, 2011 757-54-0049

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. • 9 of 78

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 10 of 78 BOEING SERVICE BULLETIN 757-54-0049

BLANK PAGE

Commercial Airplanes 757 Service Bulletin

SPECIAL ATTENTION Number: 757-54-0049 Original Issue: July 16, 2007 Revision 2: July 27, 2011 ATA System: 5451 SUBJECT: NACELLES/PYLONS - Nacelle Strut - Thrust Reverser Aft Hinge Fitting Modification

- Rolls Royce RB211-535E Engines BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

1. PLANNING INFORMATION A. Effectivity

1. Airplanes Refer to Service Bulletin Index Document D624N001 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

This service bulletin is for the airplanes shown below. Refer to PRR 54530-267RS and PRR 55029-R for data about this change.

DESCRIPTIONCONFIGURATIONGROUP 757-200/ 200CB/ 200PF Airplanes, with Rolls Royce RB211-535E engines.

-1 Airplanes that have not been modified in accordance with the original issue of this service bulletin.

1 Airplanes that have been modified in accordance with the original issue of this service bulletin.

2 Airplane Models:

757-200, 757-200CB, 757-200PF GroupVariable Number 1NA002 - NA028 1NA194 - NA199 1NA237 - NA239

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 11 of 78

GroupVariable Number 1NA301 - NA305 1NA341 - NA352 1NA392 - NA399 1NA401 - NA408 1NA441 - NA447 1NB021 - NB023 1NB036 - NB041 1NB051 - NB053 1NB061 - NB073 1NB079 1NB131 - NB148 1NB161 - NB162 1NB201 - NB204 1NB221 - NB228 1NB230 1NB236 1NB239 1NB261 - NB267 1NB291 - NB299 1NB301 - NB302 1NB311 1NB321 - NB331 1NB421 - NB438 1NB446 1NB451 - NB454 1NB501 - NB523 1NB561 1NB571 1NB581 - NB583 1NC058 - NC062 1NC936 - NC950 1NC971 - NC974 1ND001 - ND007

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 16, 2007 757-54-0049Revision 2: July 27, 2011 12 of 78 BOEING SERVICE BULLETIN 757-54-0049

Pages 13–24 of 78