Copy · U.S. DOT/FAA - Service Bulletin · 130 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0856; AD 2013-11-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'f52d66a1db3bda7cc3c17de2d4523d07584b373f1dd9e77408306be47858eb37'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 767 Service Bulletin

SPECIAL ATTENTION Number: 767-25-0381 Original Issue: August 19, 2010 Revision 1: September 17, 2012 ATA System: 2510 2550 SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment and Cargo Compartments - BMS 8-39 Urethane Foam Replacement Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 2010 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.

This document includes proprietary information owned by The Boeing Company and/or one or more third parties.

Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 1 of 130

3.0

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 2 of 130 BOEING SERVICE BULLETIN 767-25-0381

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary7

1. PLANNING INFORMATION ........................................ 1 3 A. Effectivity ............................................... 1 3

1. Airplanes ............................................ 1 3

2. Spares Affected ........................................ 2 1 B. Concurrent Requirements ...................................... 2 1 C. Reason ................................................ 2 1 D. Description .............................................. 2 2 E. Compliance .............................................. 2 6 F. Approval ............................................... 2 7 G. Manpower .............................................. 2 7 H. Weight and Balance Changes .................................... 4 0 I. Electrical Load Data ......................................... 4 1 J. References .............................................. 4 1

1. Existing Data: ......................................... 4 1

2. Data supplied with this Service Bulletin: ........................... 4 1

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 4 1 K. Publications Affected ........................................ 4 2 L. Interchangeability and Intermixability of Parts ........................... 4 2

2. MATERIAL INFORMATION ........................................ 4 3 A. Material - Price and Availability ................................... 4 3 B. Industry Support Information .................................... 4 6 C. Parts Necessary For Each Airplane ................................. 4 6

1. Kits/Parts: ........................................... 4 6

2. Parts and Materials Supplied by the Operator: ........................ 5 1

3. Parts Modified and Reidentified: ............................... 5 3

4. Parts Removed and Not Replaced: .............................. 5 7 D. Parts Necessary to Change Spares ................................. 5 7 E. Special Tooling - Price and Availability ............................... 5 7 F. Special Tooling Necessary to do this Service Bulletin ....................... 5 7

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 5 9 A. GENERAL INFORMATION ..................................... 5 9 B. WORK INSTRUCTIONS ....................................... 6 0 FIGURE 1: FORWARD CARGO COMPARTMENT - LEFT SIDE SLOPING SIDEWALL FOAM REPLACEMENT [Group 1-6, 10-12] ............................. 6 4 FIGURE 2: FORWARD CARGO COMPARTMENT - RIGHT SIDE SLOPING SIDEWALL FOAM REPLACEMENT [Group 1-6, 10-12] ............................. 6 8 FIGURE 3: FORWARD CARGO COMPARTMENT FLOOR FOAM REPLACEMENT [Group 1-6, 10-12] .................................................. 7 2 FIGURE 4: AFT CARGO COMPARTMENT - LEFT SIDE SLOPING SIDEWALL FOAM REPLACEMENT [Group 1-6, 10-12] ....................................... 7 6 FIGURE 5: AFT CARGO COMPARTMENT - RIGHT SIDE SLOPING SIDEWALL FOAM REPLACEMENT [Group 1-6, 10-12] ....................................... 8 0 FIGURE 6: AFT CARGO COMPARTMENT FLOOR FOAM REPLACEMENT [Group 1-6, 10-12] . . . 84 FIGURE 7: TAPE INSTALLATION AT LEFT SIDE OF STATION 742 [Group 1, 3-4, 7, 11-12] ..... 8 8

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 3 of 130 BOEING SERVICE BULLETIN 767-25-0381

FIGURE 8: TAPE INSTALLATION AT RIGHT SIDE OF STATION 742 [Group 1, 3-4, 7, 11-12] .... 9 1 FIGURE 9: P11 PILOT OVERHEAD PANEL ACCESS [Group 1-4, 10-12] ............... 9 4 FIGURE 10: P11 PILOT OVERHEAD PANEL FOAM REPLACEMENT [Group 1-4, 10-12] ....... 9 6 FIGURE 11: REIDENTIFICATION OF PILOTS CIRCUIT BREAKER P11 PANEL ASSEMBLY [Group 1, Configuration 3; Group 2-4, 10-12, Configuration 2] ..................... 1 0 4 FIGURE 12: REIDENTIFICATION OF PILOTS CIRCUIT BREAKER P11 PANEL ASSEMBLY [Group 1, Configuration 1; Group 2-3, 10, 12, Configuration 2] .................... 1 0 6 FIGURE 13: REIDENTIFICATION OF PILOTS CIRCUIT BREAKER P11 PANEL ASSEMBLY [Group 1, Configuration 2; Group 2-4, 10-12, Configuration 1] ..................... 1 0 8 FIGURE 14: PUT P11 PILOT OVERHEAD PANEL BACK TO A SERVICEABLE CONDITION [Group 1-4, 10-12] ............................................. 1 1 0 FIGURE 15: OVERWING ESCAPE HATCH ( 4 ) CORNER SEAL REPLACEMENT [Group 3, 6, 9, 11] . 112 FIGURE 16: OVERWING ESCAPE HATCH ( 2 ) CORNER SEAL REPLACEMENT [Group 2, 5, 8, 10] . 114 FIGURE 17: FOAM PAD REMOVAL [Group 1-3, 12] ........................... 1 1 6 FIGURE 18: FELT INSTALLATION [Group 1-3, 12] ............................ 1 2 1 Appendix A: SANDING AND SCOURING (BAC 5748, TYPE II, CLASS 5) ............... 1 2 6 Appendix B: BMS8-39 URETHANE FOAM REPLACEMENT EXCLUDE AREAS/APPLICATIONS . . 128

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 4 of 130 BOEING SERVICE BULLETIN 767-25-0381

Commercial Airplanes 767 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 767-25-0381Original Issue: August 19, 2010 Revision 1: September 17, 2012 ATA System: 2510 2550 SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment and Cargo Compartments - BMS 8-39 Urethane Foam Replacement This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION No more work is necessary on the airplane(s) changed in accordance with the original issue of this service bulletin.

REASON FOR REVISION This revision is sent to make changes to the group configurations in the service bulletin, Boeing Converted Freighter (BCF) airplanes VN191-VN197 have beeen moved from Group 3 to a new Group 12 . In addition, the BMS 5-157 standard has been revised.

These sections were changed:

1. In Summary/Action and Paragraph 1.D., Description; added new instructions for Groups 4, 5, 10 and Group 12 airplanes.

2. In Paragraph 1.A.1., Airplanes; changed Group 2 and Group 3 descriptions. Added Group 12 airplanes.

3. In Summary/Manpower and Paragraph 1.G., Manpower; changed manpower estimates. Added Group 12 airplanes.

4. In Paragraph 2.A., Material - Price and Availability; changed Unit Price for Group 5, Group 8 and Group 10 airplanes. Added Group 12 applicability.

5. In Paragraph 2.A.2., Parts and Materials Supplied by the Operator; changed BMS 5-157 Part Number/Specification. In addition, added BMS 5-157 Part Number/Specification as an optional to BMS

5-149. Added Group 12 applicability.

6. In Paragraph 2.A.3, Parts Modified and Reidentified; changed Group Configurations. Added Group 12 applicability.

7. In Paragraph 3.B., Work Instructions; changed Group Configurations at step 18; Group 4 added.

8. In Paragraph 3.B., Work Instructions; changed Group Configurations at step 19; Group 2-3, 10, Configuration 2 added.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 5 of 130

9. In Paragraph 3.B., Work Instructions; added Group 12 Configurations.

10. In FIGURE 1 to FIGURE 6; added BMS 5-157 Part Number/Specification as an optional to BMS 5-149.

11. In FIGURE 1 to 14 and FIGURE 17 to 18; changed Group Configurations.

12. In FIGURE 17; changed BMS 5-157 Part Number/Specification.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY August 19, 2010Original Issue:

September 17, 2012Revision 1:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 6 of 130 BOEING SERVICE BULLETIN 767-25-0381

Commercial Airplanes 767 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 767-25-0381Original Issue: August 19, 2010 Revision 1: September 17, 2012 ATA System: 2510 2550 SUBJECT: EQUIPMENT/FURNISHINGS - Flight Compartment and Cargo Compartments - BMS 8-39 Urethane Foam Replacement BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND This change replaces seals in the cargo compartments that degrade over time and no longer satisfy the requirements for flammability, smoke and Halon retention and fire blocking. If you do not make the change as given in this service bulletin, the degraded material can be an unacceptable fuel source for a fire if exposed to an ignition source. The degraded material will also compromise Halon and smoke retention and fire blocking, which could result in the inability to keep sufficient Halon concentrations within the cargo compartment.

The seals are made of BMS 8-39 Urethane foam. BMS 8-39 foam fire retardants are mixed into, but are not chemically connected with, the remaining components of the foam. This condition will cause the fire retardants to have decreased effectiveness of fire resistance over time.

Some operators reported the BMS 8-39 Urethane foam burned at some areas in service. Boeing found that the self-extinguishing and physical properties of the BMS 8-39 Urethane foam can degrade after five to ten years.

The degraded material can be an unacceptable fire fuel source for a fire if exposed to an ignition source. The degraded material will also compromise Halon and smoke retention and fire blocking, which could result in the inability to keep sufficient Halon concentrations within the cargo compartment.

This change replaces BMS 8-39 urethane foam in areas of the airplane where it is not easy to access for fire and smoke detection or suppression. It is also replaced in areas where it is used to prevent fire or smoke penetration. It is not replaced in areas where it is encapsulated by a protective fire resistant barrier or where it is physically isolated from an ignition source. The BMS 8-39 foam is replaced with either BMS8-371 insulation foam or BMS 1-68 silicone foam rubber. The selection of either BMS8-371 or BMS 1-68 material will be based on requirements for use and its location in the airplane.

Boeing Service Related Problem (SRP) 767-SRP-25-0234 is related to this service bulletin.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 7 of 130

ACTION (PRR B12901-95S) Group 1:

1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual inspection for BMS 8-39 foam.

2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.

3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo compartment.

4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.

5. Replace BMS 8-39 foam pads with Nomex felt in the crown area.

6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.

Group 2:

1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual inspection for BMS 8-39 foam.

2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.

3. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.

4. Replace BMS 8-39 foam pads with Nomex felt in the crown area.

5. Replace over wing escape hatch corner seals.

6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.

Group 3:

1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual inspection for BMS 8-39 foam.

2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.

3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape In the forward cargo compartment.

4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.

5. Replace BMS 8-39 foam pads with Nomex felt in the crown area.

6. Replace over wing escape hatch corner seals.

7. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 8 of 130 BOEING SERVICE BULLETIN 767-25-0381

Group 4:

1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual inspection for BMS 8-39 foam.

2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.

3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo compartment.

4. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.

5. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.

Group 5:

1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual inspection for BMS 8-39 foam.

2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.

3. Replace over wing escape hatch corner seals.

4. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.

Group 6:

1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual inspection for BMS 8-39 foam.

2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.

3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo compartment.

4. Replace over wing escape hatch corner seals.

5. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.

Group 7:

1. Remove the sloping sidewalls.

2. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo compartment.

3. Install the sloping sidewalls.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 9 of 130 BOEING SERVICE BULLETIN 767-25-0381

Group 8-9:

1. Replace over wing escape hatch corner seals.

Group 10:

1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual inspection for BMS 8-39 foam.

2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.

3. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.

4. Replace over wing escape hatch corner seals.

5. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.

Group 11:

1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual inspection for BMS 8-39 foam.

2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.

3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape in the forward cargo compartment.

4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.

5. Replace over wing escape hatch corner seals.

6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.

Group 12:

1. Remove the end wall curtain, sloping sidewalls, ball transfer panels and floor panels to gain access to the areas where BMS 8-39 foam is located in the forward and aft cargo compartments. Do a general visual inspection for BMS 8-39 foam.

2. Replace BMS 8-39 foam with BMS 1-68 foam in the forward and aft cargo compartments.

3. Cover the BMS 8-39 foam near STA 742 frame with cargo liner joint sealing tape In the forward cargo compartment.

4. Replace BMS 8-39 foam with BMS 8-371 foam on the flight deck.

5. Replace BMS 8-39 foam pads with Nomex felt in the crown area.

6. Install the end wall curtain, sloping sidewalls, ball transfer panels and floor panels.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 10 of 130 BOEING SERVICE BULLETIN 767-25-0381

EFFECTIVITY 767-200 -300 -300F and -400ER Airplanes. See Service Bulletin Paragraph 1.A.1 for effectivity.

COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Boeing recommends incorporation of this service bulletin within six years after the original issue the date on this service bulletin.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the inspection and change given in this service bulletin.

MANPOWER Elapsed HoursTotal Task HoursAirplanes

34.6373.96GROUP 1

35.8875.21GROUP 2,

CONFIGURA- TION 1

35.9875.31GROUP 2,

CONFIGURA- TION 2

36.8876.21GROUP 3,

CONFIGURA- TION 1

36.9876.31GROUP 3,

CONFIGURA- TION 2

30.1369.46GROUP 4

23.4056.86GROUP 5

23.3956.86GROUP 6

3.003.00GROUP 7

2.252.25GROUP 8

2.252.25GROUP 9

29.6368.96GROUP 10,

CONFIGURA- TION 1

29.7369.06GROUP 10,

CONFIGURA- TION 2

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: August 19, 2010 767-25-0381Revision 1: September 17, 2012 11 of 130 BOEING SERVICE BULLETIN 767-25-0381

Page 12OCROpen in PDF

BOEING SERVICE BULLETIN 767-25-0381 Airplanes Total Task Hours Elapsed Hours GROUP 11 71.71 32.38 GROUP 12, 73.96 34.63

CONFIGURA- TION 1 GROUP 12, 74.06 34.73

CONFIGURA- TION 2

MATERIAL INFORMATION Boeing Supplied Kits/Parts.

Refer to Paragraph 2.A., Material - Price and Availability.

GROUP 1-3 AND 12 AIRPLANES:

REMOVE CROWN AREA FOAM PADS AND INSTALL NOMEX FELT.

GROUP 1-6 AND 10-12 AIRPLANES:

REPLACE BMS 8-39 FOAM WITH BMS 1-68 FOAM IN THE FORWARD AND AFT CARGO COMPARTMENTS.

P11 PANEL GROUP 2, 3, 5, 6 AND 8-12 AIRPLANES:

AREA REPLACE OVER THE WING ESCAPE HATCH CORNER SEALS.

GROUP 1, 3-7 AND 12 AIRPLANES:

COVER THE BMS 8-39 FOAM NEAR STA 742 FRAME WITH CARGO LINER

JOINT SEALING TAPE IN THE FORWARD CARGO COMPARTMENT.

GROUP 1-4 AND 10-12 AIRPLANES:

REPLACE BMS 8-39 FOAM WITH BMS 8-371 FOAM ON J59509 THE FLIGHT DECK.

Original Issue: August 19, 2010 Revision 1: September 17, 2012 767-25-0381

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 130

Pages 13–24 of 130