Copy · U.S. DOT/FAA - Service Bulletin - SB-767-27-0205-02 · 24 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2005-22523; AD 2013-05-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '54c97c99cb01b3f90425d3d64286b40b75a5a433783461299a6e770be990fa99'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 767 Service Bulletin Number: 767-27-0205 Original Issue: January 27, 2005 Revision 2: August 30, 2011 ATA System: 2731 SUBJECT: FLIGHT CONTROLS - Elevator Control System - Seal Block Drain Hole Inspection Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 2005 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.

This document includes proprietary information owned by The Boeing Company and/or one or more third parties.

Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 1 of 24

3.0

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 2 of 24 BOEING SERVICE BULLETIN 767-27-0205

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary7

1. PLANNING INFORMATION ........................................ 1 1 A. Effectivity ............................................... 1 1

1. Airplanes ............................................ 1 1

2. Spares Affected ........................................ 1 1 B. Concurrent Requirements ...................................... 1 1 C. Reason ................................................ 1 2 D. Description .............................................. 1 2 E. Compliance .............................................. 1 2 F. Approval ............................................... 1 3 G. Manpower .............................................. 1 3 H. Weight and Balance Changes .................................... 1 4 I. Electrical Load Data ......................................... 1 4 J. References .............................................. 1 4

1. Existing Data: ......................................... 1 4

2. Data supplied with this Service Bulletin: ........................... 1 4

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 4 K. Publications Affected ........................................ 1 4 L. Interchangeability and Intermixability of Parts ........................... 1 5

2. MATERIAL INFORMATION ........................................ 1 7 A. Material - Price and Availability ................................... 1 7 B. Industry Support Information .................................... 1 7 C. Parts Necessary For Each Airplane ................................. 1 7

1. Kits/Parts: ........................................... 1 7

2. Parts and Materials Supplied by the Operator: ........................ 1 7

3. Parts Modified and Reidentified: ............................... 1 7

4. Parts Removed and Not Replaced: .............................. 1 7 D. Parts Necessary to Change Spares ................................. 1 7 E. Special Tooling - Price and Availability ............................... 1 7 F. Special Tooling Necessary to do this Service Bulletin ....................... 1 7

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 9 A. GENERAL INFORMATION ..................................... 1 9 B. WORK INSTRUCTIONS ....................................... 2 0 FIGURE 1: GENERAL VISUAL INSPECTION AND CLEANING OF THE FLANGED TUBES AND DRAIN HOLES ............................................. 2 1

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 3 of 24 BOEING SERVICE BULLETIN 767-27-0205

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 4 of 24 BOEING SERVICE BULLETIN 767-27-0205

BLANK PAGE

Commercial Airplanes 767 Service Bulletin Revision Transmittal SheetNumber: 767-27-0205Original Issue: January 27, 2005 Revision 2: August 30, 2011 ATA System: 2731 SUBJECT: FLIGHT CONTROLS - Elevator Control System - Seal Block Drain Hole Inspection This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2005-NM-058-AD, is related to this service bulletin.

No more work is necessary on the airplane(s) inspected in accordance with the original issue or revision 1 of this service bulletin. Continue to accomplish the repeat inspection at the intervals given in Paragraph 1.E., Compliance.

REASON FOR REVISION Revision 2 is sent to limit the effectivity of this service bulletin. Airplanes after line number 974 have a configuration that is not affected if debris blocks the drain hole in the flanged tube.

These sections were changed:

1. Summary, Compliance: NPRM data is added.

2. Summary, Action: Changed to specify a general visual inspection.

3. Paragraph 1.A., Effectivity: A paragraph about the Production Revision Record (PRR) is added.

4. Paragraph 1.B., Concurrent Requirements: changed to give revision levels of the concurrent service bulletin.

5. Paragraph 1.D., Description: Changed to specify a general visual inspection.

6. Paragraph 1.E., Compliance: Changed to give compliance time by condition. The compliance data for airplanes not affected by the concurrent service bulletin are removed. A reference to the NPRM is added.

7. Paragraph 1.J., References: A reference to the NPRM is added.

8. Paragraph 1.K., Publications Affected: The Damage Tolerance Inspection evaluation statement is added.

9. Paragraph 3.A., General Information: New notes are added.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 5 of 24

10. Paragraph 3.B., Work Instructions: Step 2 is updated to specify a general visual inspection.

11. Paragraph 3.B., Work Instructions: Step 4 is deleted because it is redundant to paragraph 1.E., Compliance.

12. Figure 1: The title is updated to indicate a general visual inspection. Instructions in the Notes column of the step table are updated to specify a general visual inspection.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY January 27, 2005Original Issue:

February 12, 2009Revision 1:

August 30, 2011Revision 2:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 6 of 24 BOEING SERVICE BULLETIN 767-27-0205

Commercial Airplanes 767 Service Bulletin SummaryNumber: 767-27-0205Original Issue: January 27, 2005 Revision 2: August 30, 2011 ATA System: 2731 SUBJECT: FLIGHT CONTROLS - Elevator Control System - Seal Block Drain Hole Inspection

CONCURRENT REQUIREMENTS Refer to Paragraph 1.B., Concurrent Requirements.

BACKGROUND The related 767-200, 767-300, and 767-300F Boeing service bulletin is 767-27-0204.

The inspection given in this service bulletin will make sure that frozen moisture cannot collect in the aft pressure seals for the elevator control cables.

The aft pressure seals for the elevator control cables help to keep the cabin pressurized. Two flanged tubes hold the pressure seals to the rear bulkhead. A small drain hole in each of the two flanged tubes keeps moisture away from the seals when the cabin is pressurized. If the drain hole is blocked, moisture can collect in the tubes.

If this occurs, the moisture can freeze when the external temperature decreases during high-altitude flight. This frozen moisture can cause high resistance to the movement of the control cables through the aft pressure seals.

This service bulletin gives instructions for a repetitive inspection of the two flanged tubes and drain holes.

Boeing Service Related Problem (SRP) 767-SRP-27-0185 is related to this service bulletin. Refer to Boeing service Letter 767-SL-27-129 for customer reports about this problem.

ACTION (PRR B12901-43S) Remove the pressure seals from the flanged tubes for elevator control cables E1A and E1B. Do a general visual inspection of the flanged tubes and drain holes to make sure they are clean. If necessary, clean the inside of the flanged tube and the drain hole on each of the two flanged tubes. Install and adjust the pressure seals. Do this procedure again at the specified interval.

EFFECTIVITY 767-400ER Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).

COMPLIANCE Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2005-NM-058-AD, is related to this service bulletin.

Refer to Paragraph 1.E., Compliance.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 7 of 24

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the maintenance procedure given in this service bulletin.

MANPOWER Elapsed HoursTotal Task HoursAirplanes

1.51.5All

MATERIAL INFORMATION None.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 8 of 24 BOEING SERVICE BULLETIN 767-27-0205

Page 9OCROpen in PDF

BOEING SERVICE BULLETIN 767-27-0205

PRESSURE SEALS

STA STA STA 1605 1582 1629

ELEVATOR CONTROL CABLE E1A

INSPECT THE FLANGED

ELEVATOR CONTROL TUBES AND DRAIN HOLES CABLE E1B STRINGER 20 -

• PRESSURE

BULKHEAD STRINGER 22 UP 498811 Original Issue: January 27, 2005 Revision 2: August 30, 2011 767-27-0205 Copyright © Unpublished Work - See page 1 for details. BOEING PROPRIETARY - 9 of 24

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 10 of 24 BOEING SERVICE BULLETIN 767-27-0205

BLANK PAGE

Commercial Airplanes 767 Service Bulletin Number: 767-27-0205 Original Issue: January 27, 2005 Revision 2: August 30, 2011 ATA System: 2731 SUBJECT: FLIGHT CONTROLS - Elevator Control System - Seal Block Drain Hole Inspection

1. PLANNING INFORMATION A. Effectivity

1. Airplanes This service bulletin is for the airplane(s) shown below. Refer to PRR B12901-43S for data about this change.

Refer to Service Bulletin Index Document D624T001 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

DESCRIPTIONCONFIGURATIONGROUP 767-400ER airplanes line number 758-965-1 Airplane Models:

767-400ER GroupVariable Number 1VQ001 - VQ021 1VQ071 - VQ086 1VQ111

2. Spares Affected None.

B. Concurrent Requirements DescriptionService BulletinCompany Elevator Control Cable Aft Pressure Bulkhead Seal Shield Flanged Tube Installation 767-27A0219, Original Issue, or Revision 1 The Boeing Company

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 11 of 24

C. Reason The related 767-200, 767-300, and 767-300F Boeing service bulletin is 767-27-0204.

The inspection given in this service bulletin will make sure that frozen moisture cannot collect in the aft pressure seals for the elevator control cables.

The aft pressure seals for the elevator control cables help to keep the cabin pressurized. Two flanged tubes hold the pressure seals to the rear bulkhead. A small drain hole in each of the two flanged tubes keeps moisture away from the seals when the cabin is pressurized. If the drain hole is blocked, moisture can collect in the tubes. If this occurs, the moisture can freeze when the external temperature decreases during high-altitude flight. This frozen moisture can cause high resistance to the movement of the control cables through the aft pressure seals.

This service bulletin gives instructions for a repetitive inspection of the two flanged tubes and drain holes.

Boeing Service Related Problem (SRP) 767-SRP-27-0185 is related to this service bulletin. Refer to Boeing service Letter 767-SL-27-129 for customer reports about this problem.

Revision 1 is sent to change the service bulletin number 767-27A0193 to 767-27A0219. This is necessary because the tube design in 767-27A0219 has replaced the design in 767-27A0193.

Revision 2 is sent to limit the effectivity of this service bulletin. Airplanes after line number 974 have a configuration that is not affected if debris blocks the drain hole in the flanged tube.

D. Description Remove the pressure seals from the flanged tubes for elevator control cables E1A and E1B. Do a general visual inspection of the flanged tubes and drain holes to make sure they are clean. If necessary, clean the inside of the flanged tube and the drain hole on each of the two flanged tubes. Install and adjust the pressure seals. Do this procedure again at the specified interval.

Revision 1 - No more work is necessary on airplanes changed as shown in the original issue of this service bulletin.

Revision 2 - No more work is necessary on airplanes inspected in accordance with the original issue or revision 1 of this service bulletin. Continue to accomplish the repeat inspection at the intervals given in Paragraph 1.E., Compliance.

The work in this service bulletin is done in the maintenance zone(s) given below.

Affected Maintenance Zones ZoneModel 311767-400ER E. Compliance Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2005-NM-058-AD, is related to this service bulletin.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: January 27, 2005 767-27-0205Revision 2: August 30, 2011 12 of 24 BOEING SERVICE BULLETIN 767-27-0205

Pages 13–24 of 24