Copy · U.S. DOT/FAA - Service Bulletin (6) · 35 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-0382; AD 2011-25-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'c6e362fbe473512a23cd05af1cee44a7b9002efadf600d60cb1dc1b36cf09fc5'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplane Group 767 Service Bulletin Number: 767-31-0101 SummaryDate: July 6, 2000 ATA System: 3141 SUBJECT: INDICATING/RECORDING SYSTEMS - Central Computers - Engine Indication And Crew Alerting System - EICAS Computer Replacement And Wire Change - Pratt And Whitney JT9D-( ) Engines

CONCURRENT REQUIREMENTS None.

BACKGROUND This service bulletin gives instructions to replace the two Engine Indication and Crew Alerting System (EICAS) computers. The new computers allow loadable Operational Program Software (OPS) and Operational Program Configuration (OPC) software installation via a portable data loader (PDL) or an airborne data loader (ADL).

The new EICAS computers allow the use of OPC software to change the configuration of options selected by the customer. Loadable OPC software eliminates the requirement to change program pin wiring to make customer options.

The new EICAS computers have increased capacity, support optional Future Air Navigation System (FANS) features, and comply with Amendment No. 121-266 [Docket No. 28109], "Revisions to Digital Flight Data Recorder Rules".

The related Rockwell/Collins Service Bulletin is EAP-701A-31-AM.

Boeing Service Letter 767-SL-31-036A is related to this service bulletin.

ACTION (PRR B12710, PRR B13058) In the E8 rack, replace the left and right EICAS computers. Make wire changes in the E8 shelf.

Change left and right EICAS computer connector keying on the E-8 shelf. Load EICAS OPS and OPC software into both left and right EICAS computers.

Do an operational test of the EICAS computers.

EFFECTIVITY All 767 airplanes line positions 1 - 329 with Pratt and Whitney JT9D-( ) engines.

The effectivity is broken up into three major groups for convenience.

COMPLIANCE No compliance time is given.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the configuration changes given in this service bulletin.

MANPOWER Total Man-hours Elapsed Time (Hours)

9.50 4.75 The change to the EICAS computers as given in the Rockwell/Collins service bulletin is not included.

MATERIAL INFORMATION Operator Supplied Parts 767-31-0101 Summary Page 1 of 2

BOEING SERVICE BULLETIN 767-31-0101

REPLACE LEFT AND RIGHT EICAS COMPUTERS IN E8 RACK FWD

MAIN EQUIPMENT CENTER

EICAS SHELF WIRES

MAKE CHANGES TO S52262 July 6, 2000 767-31-0101 Summary Page 2 of 2

Commercial Airplane Group 767 Service Bulletin Number: 767-31-0101 Date: July 6, 2000 ATA System: 3141 SUBJECT: INDICATING/RECORDING SYSTEMS - Central Computers - Engine Indication And Crew Alerting System - EICAS Computer Replacement And Wire Change - Pratt And Whitney JT9D-( ) Engines

1. PLANNING INFORMATION A. Effectivity

1. Airplanes Refer to Service Bulletin Index Document D624T001, Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

This service bulletin is for the airplanes shown below. An equivalent change is on subsequent production airplanes. Refer to PRR B12710 and PRR B13058 for data about this change.

Airplane Models:

767-200 767-300

IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER

ABX AIR (ABX) 1 VA803 VA807-VA809

AIR CANADA (ACN) 1 VA701-VA719 VB001-VB002 VB201-VB202

AIR CHINA (BEJ) 2 VE064-VE065 VE083-VE084

AIR GABON (GBN) 1 VE021

BOEING (TBC) 2 VA001

C-S AVIATION SERVICES (CSV) 3 VE041

EL AL ISRAEL AIRLINES (ELA) 1 VB281-VB282 2 VB283-VB284

ETHIOPIAN AIRLINES (ETH) 2 VE001-VE002

JAPAN AIRLINES (JAL) 1 VB371-VB373 VK001-VK011 VK021-VK022 July 6, 2000 767-31-0101 Page 1 of 26

BOEING SERVICE BULLETIN 767-31-0101

QANTAS (QAN) 2 VE061-VE063 VE066-VE069

SOUTH AFRICAN AIRWAYS (SAA) 1 VE022-VE023

TWA (TWA) 1 VA801-VA802 VA804-VA806 VA810 VB301-VB302

UNITED AIRLINES (UAL) 1 VA002-VA020

IDENTIFICATION BY VARIABLE NUMBER GROUP 1 VA002-VA020 VA701-VA719 VA801-VA810 VB001-VB002 VB201-VB202 VB281-VB282 VB301-VB302 VB371-VB373 VE021-VE023 VK001-VK011 VK021-VK022 GROUP 2 VA001 VB283-VB284 VE001-VE002 VE061-VE069 VE083-VE084 GROUP 3 VE041

2. Spares Examine your spares supply for the parts identified in Paragraph 2.E., Existing Parts Accountability. If any parts are found, refer to Paragraph 2.E., Existing Parts Accountability, for the recommended use.

July 6, 2000 767-31-0101 2

BOEING SERVICE BULLETIN 767-31-0101 B. Concurrent Requirements None.

C. Reason This service bulletin gives instructions to replace the two Engine Indication and Crew Alerting System (EICAS) computers. The new computers allow loadable Operational Program Software (OPS) and Operational Program Configuration (OPC) software installation via a portable data loader (PDL) or an airborne data loader (ADL).

The new EICAS computers allow the use of OPC software to change the configuration of options selected by the customer. Loadable OPC software eliminates the requirement to change program pin wiring to make customer options.

The new EICAS computers have increased capacity, support optional Future Air Navigation System (FANS) features, and comply with Amendment No. 121-266 [Docket No. 28109], "Revisions to Digital Flight Data Recorder Rules".

The related Rockwell/Collins Service Bulletin is EAP-701A-31-AM.

Boeing Service Letter 767-SL-31-036A is related to this service bulletin.

D. Description In the E8 rack, replace the left and right EICAS computers. Make wire changes in the E8 shelf.

Change left and right EICAS computer connector keying on the E-8 shelf. Load EICAS OPS and OPC software into both left and right EICAS computers. Do an operational test of the EICAS computers.

NOTE: Some service bulletins with EICAS program pin changes are not usable after this change is done. Operators must contact Boeing for the OPC diskette that accomplishes the equivalent of those program pin changes.

The changes in this service bulletin will change the EICAS.

An evaluation form is attached to this service bulletin. Please use this form to tell us what you think of the quality of this service bulletin.

E. Compliance No compliance time is given.

July 6, 2000 767-31-0101 3

BOEING SERVICE BULLETIN 767-31-0101 F. Approval This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this service bulletin comply with the applicable Federal Aviation Regulations (FAR) and are FAA approved. This service bulletin and the FAA approval were based on the airplane in its original Boeing delivery configuration or as modified by other FAA approved Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this service bulletin.

G. Manpower The table below shows an estimate of the man-hours necessary to do this change for each airplane.

This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator man-hour data if necessary. The estimate does not include lost time. These are some examples of lost time:

- Time to adjust to the workplace

- Time to schedule the work

- Time to examine the work

- Time to cure the materials

- Time to make the parts

- Time to find the tools.

Task Number of Persons Man-Hours Elapsed Time (Hours) Open Access 2 0.5 0.25 Change 2 5.5 2.75 Close Access 2 0.5 0.25 Test 2 3.0 1.50 TOTAL FOR EACH AIRPLANE 9.5 4.75 The change to the EICAS computers as given in Collins Service Bulletin EAP-701A-31-AM is not included.

July 6, 2000 767-31-0101 4

BOEING SERVICE BULLETIN 767-31-0101 H. Weight and Balance Changes Airplane Group and Model Change in Weight (Pounds) Change in Moment (Pound-Inches) Group 1 -200 airplanes -12.2 -3,123.0 -300 airplanes -12.2 -1,647.0 Group 2 -200 airplanes -12.2 -3,123.0 -300 airplanes N/A N/A Group 3 -200 airplanes -12.2 -3,123.0 -300 airplanes N/A N/A I. Electrical Load Data Not changed.

J. References

1. Existing Data:

a. Engineering Change Memo PRR B12710 and PRR B13058

b. 767 Maintenance Manual (AMM) Subjects 20-41-01, 24-22-00, 31-41-02, 71-00-00/201

c. 767 Wiring Diagrams 31-41-15, 31-41-18

d. Boeing Standard Wiring Practices Manual (BSWPM) 20-10-11, 20-10-12, 20-10-14, 20-10-19, 20-30-11, 20-71-14, 20-90-11

e. Collins Service Bulletin EAP-701A-31-AM*

f. Boeing Service Letter 767-SL-31-036A, dated August 21, 1998.

g. Amendment No. 121-266 [Docket No. 28109], Revisions to Digital Flight Data Recorder Rules * The supplier was told to send copies of the service bulletin to each operator.

2. Data supplied with this service bulletin:

None.

3. Installation Drawings:

None.

July 6, 2000 767-31-0101 5

BOEING SERVICE BULLETIN 767-31-0101 K. Publications Changed Publication Chapter-Section 767 FAA Approved Airplane Flight Manual * 767 Operations Manual Chapter 21 767 Maintenance Manual 23-21, 23-42, 23-43, 23-46, 31-41, 32-09, 32-61 767 Fault Isolation Manual 23-21, 31-41, 32-09, 71 EICAS Message Index 767 Ramp Maintenance Manual 31-03, 31-04, 31-05, 32-21 Overhaul Manual 3, 4, 9, 21, 22 767 Illustrated Parts Catalog 31-41 * This change affects Section 1 of the FAA Approved Airplane Flight Manual. Operators will receive applicable data.

L. Interchangeability and Intermixability Refer to Paragraph 2.E., Existing Parts Accountability, for interchangeability and intermixability information.

July 6, 2000 767-31-0101 6

BOEING SERVICE BULLETIN 767-31-0101

2. MATERIAL INFORMATION A. Material - Price and Availability The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary For Each Airplane, and Paragraph 2.D., Parts Necessary to Change Spares. Refer to Collins Service Bulletin EAP-701A-31-AM. The OPC diskette can be ordered through Boeing Spares.

B. Industry Support Information Boeing warranty remedies are not available for the configuration changes given in this service bulletin.

C. Parts Necessary For Each Airplane Parts and Materials Supplied by the Operator:

Quantity Part Number (Specification) Name 2 S242N701-1001 (a) EICAS computer 30 feet BMS 13-54, Type 1, Class 1, Finish C, Grade B, (b) (c) Lacing Tape, White 4 feet RT876 (d) Sleeving, Yellow Thermofit, 1/8 inch diameter 6 M39029/11-145 (b) Terminal Block Contact 5 feet BMS 13-48, Type 10, Class 1, AWG 22 Wire (b) 1 242T7001-2XXX (e) OPC diskette 1 831-4565-102 (f) OPS diskette

(a) Get EICAS computers S242N701-1001 from S242N701-30X (Collins Part Number 622-6087-10X). See Collins Service Bulletin EAP-701A-31-AM to get the new EICAS computers or contact Collins at the address given below.

Rockwell Collins Incorporated (V4V792) Air Transport Division 400 Collins Road N.E.

Cedar Rapids, Iowa 52498 Phone (319) 295-5000

(b) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.

(c) Gudebrod Incorporated (V82110) Griffith Towers P.O. Box 357 Pottstown, PA 19464-5568

(d) Raychem Corporation (V06090) 300 Constitution Drive Menlo Park, CA 94025-1111

(e) Refer to Appendix A in this service bulletin for the applicable part number of the OPC diskette.

(f) Refer to (a) above for manufacturer and address.

July 6, 2000 767-31-0101 7

BOEING SERVICE BULLETIN 767-31-0101 D. Parts Necessary to Change Spares See the Collins Service Bulletin EAP-701A-31-AM to change spare EICAS computers. Get OPC software from Boeing Spares organization.

E. Existing Parts Accountability The parts shown below are changed as shown in this service bulletin. Quantity is the number of parts changed on each airplane.

Existing Part Number RUC Name Quantity New Part Number PNC RC S242N701-30X (Collins part number 622-6087-10X) RW1 EICAS Computer 2 S242N701-1001 (Collins part number 822-1033-100) S A RUC Recommended Use Code RW1 - Make the change given in Collins Service Bulletin EAP-701A-31-AM.

PNC Part Number Code S - This is the part number for the new equivalent or replacement part.

- To get a new part, use this part number in your order.

RC Replacement Code A - Do not use the existing part to replace the new or changed part.

- The existing part is not interchangeable or intermixable with the new part.

F. Special Tooling - Price and Availability None G. Special Tooling Necessary to do This Bulletin No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.

July 6, 2000 767-31-0101 8

BOEING SERVICE BULLETIN 767-31-0101

3. ACCOMPLISHMENT INSTRUCTIONS

GENERAL NOTES

1. The paragraphs identified with a letter give the general work instructions and the necessary tests.

The instructions identified with numbers on the figures give the recommended sequence of steps.

2. Refer to the Boeing Standard Wiring Practices Manuals 20-10-11 and 20-10-12 for the wire installation procedures and 20-10-19 for wire separation.

3. Obey all of the warnings and cautions given in the specified manual sections.

4. Some service bulletins with EICAS program pin changes are not usable after this change is done.

Operators must contact Boeing for the OPC diskette that accomplishes the equivalent of those program pin changes.

5. The Accomplishment Instructions are divided into two parts as follows:

- Part I - Instructions to compare the EICAS readouts to those given in Appendix A are given.

These instructions will make sure the applicable software is used for this change.

- Part II - Instructions to replace the EICAS computers, make wire changes and load the new software are given.

WORK INSTRUCTIONS

PART I - EICAS READOUT COMPARISON A. On the P9 panel, move the EICAS DSP "COMPUTER" switch to "L".

B. On the P61 panel, press the EICAS MAINT Panel "CONF/MCDP" button.

C. Compare the "PROG PINS" and "SUPL PINS" readouts displayed on the lower EICAS display with the LEFT PROG PINS and SUPL PINS information in Appendix A for the applicable effectivity. If the EICAS readouts do not agree with those given in Appendix A, supply the PROG PINS and SUPL PINS data to The Boeing Company to get the correct OPC software part number.

NOTE: For airplanes with EICAS part numbers S242N701-301 through -306, the "SUPL PINS" readout is not applicable. It is only necessary to make sure that the left EICAS "PROG PINS" readout agrees with Appendix A.

D. On the P9 panel, move the EICAS DSP "COMPUTER" switch to "AUTO".

PART II - SOFTWARE LOADABLE EICAS COMPUTER CHANGE A. Remove the electrical power from the airplane circuits as given in 767 AMM Subject 24-22-00.

Attach DO-NOT-CLOSE tags to opened circuit breakers and DO-NOT-OPERATE tags to applicable switches. Use an independent power source for lighting.

B. Gain access to the E8 shelf in the main equipment center.

C. Remove the left and right EICAS computers as shown in Figure 1.

D. Remove and/or tape and stow W1035 wires, even if they are installed at locations other than shown in Figure 2.

E. Make changes to W1037 wires, if installed as shown in Figure 3.

July 6, 2000 767-31-0101 9

BOEING SERVICE BULLETIN 767-31-0101 F. On the E8 shelf, make changes to the left and right EICAS computer connector keying as shown in Figure 4.

G. Install the new left and right EICAS computers as shown in Figure 5.

H. Remove DO-NOT-CLOSE tags from circuit breakers and DO-NOT-OPERATE tags from switches installed in Step A. Supply the electrical power to the airplane circuits as given in 767 AMM 24-22-00.

I. Install the OPC software for the left and right EICAS computers. Refer to Appendix A in this service bulletin and the instructions below. Load the left EICAS computer first. Load the right EICAS computer second.

1. Make sure that the PDL ON/OFF switch is in the OFF position.

2. Open the circuit breakers shown below:

Circuit Breaker Name Panel Location C4078 EICAS CMPTR L P11-2 J02 C4079 EICAS CMPTR R P11-5 J29

3. Set the airplane parking brake.

WARNING: ELECTRICAL SHOCK HAZARD. THE CONNECTION AND REMOVAL OF THE

PORTABLE DATA LOADER (PDL) INTERFACE CABLE CAN CAUSE AN ELECTRICAL SHOCK. DAMAGE TO PEOPLE AND EQUIPMENT CAN OCCUR. MAKE SURE THAT THE EICAS COMPUTER CIRCUIT BREAKERS SPECIFIED IN STEPS 2, 12, AND 22 ARE OPEN BEFORE THE PDL INTERFACE CABLE IS CONNECTED OR REMOVED.

4. Connect the Portable Data Loader (PDL) interface cable to the ARINC 615 connector on the front face of the left EICAS computer (M10181).

5. Close the circuit breakers shown below:

Circuit Breaker Name Panel Location C1170 LANDING GEAR AIR/GND SYS 2 P11-6 U23 or U24 C1175 LDG GEAR POS SYS 1 P11-4 C30 C1179 PARKING BRAKE VLV P6-1 F4 C1182 LANDING GEAR AIR/GND SYS 1 P11-3 U15

6. Obtain the applicable EICAS OPC software part number diskette for the airplane effectivity.

Refer to Appendix A.

July 6, 2000 767-31-0101 10

Pages 13–24 of 35