Copy · U.S. DOT/FAA - SB-777-32-0083-02 · 34 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0789; AD 2014-05-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '028ebcfd178576396ea4f88d887bc67434f4278a5411fe040600857ca5ec4f94'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 777 Service Bulletin

SPECIAL ATTENTION Number: 777-32-0083 Original Issue: February 05, 2009 Revision 2: May 02, 2013 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Retract Actuator Fuse Pin Inspection and Replacement Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2009 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 1 of 34

4.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 2 of 34 BOEING SERVICE BULLETIN 777-32-0083

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary7

1. PLANNING INFORMATION ........................................ 1 1 A. Effectivity ............................................... 1 1

1. Airplanes ............................................ 1 1

2. Spares Affected ........................................ 1 4 B. Concurrent Requirements ...................................... 1 4 C. Reason ................................................ 1 4 D. Description .............................................. 1 5 E. Compliance .............................................. 1 5 F. Approval ............................................... 1 7 G. Manpower .............................................. 1 8 H. Weight and Balance Changes .................................... 1 8 I. Electrical Load Data ......................................... 1 8 J. References .............................................. 1 8

1. Existing Data: ......................................... 1 8

2. Data Supplied with this Service Bulletin: ........................... 1 8

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 8 K. Publications Affected ........................................ 1 9 L. Interchangeability and Intermixability of Parts ........................... 1 9 M. Software Accomplishment Summary ................................ 1 9

2. MATERIAL INFORMATION ........................................ 2 1 A. Material - Price and Availability ................................... 2 1 B. Industry Support Information .................................... 2 1 C. Parts Necessary for Each Airplane ................................. 2 1

1. Kits/Parts ............................................ 2 1

2. Parts and Materials Supplied by the Operator ........................ 2 2

3. Parts Modified and Reidentified ................................ 2 2

4. Parts Removed and Not Replaced .............................. 2 2 D. Parts Necessary to Change Spares ................................. 2 2 E. Special Tooling - Price and Availability ............................... 2 2 F. Special Tooling Necessary to do this Service Bulletin ....................... 2 2

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 3 A. GENERAL INFORMATION ..................................... 2 3 B. WORK INSTRUCTIONS ....................................... 2 4 FIGURE 1: LEFT MLG RETRACT ACTUATOR FUSE PIN INSPECTION ................ 2 5 FIGURE 2: RIGHT MLG RETRACT ACTUATOR FUSE PIN INSPECTION ............... 2 7 FIGURE 3: LEFT MLG RETRACT ACTUATOR FUSE PIN REPLACEMENT .............. 2 9 FIGURE 4: RIGHT MLG RETRACT ACTUATOR FUSE PIN REPLACEMENT ............. 3 2 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 3 of 34 BOEING SERVICE BULLETIN 777-32-0083

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 4 of 34 BOEING SERVICE BULLETIN 777-32-0083

BLANK PAGE

Commercial Airplanes 777 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 777-32-0083Original Issue: February 05, 2009 Revision 2: May 02, 2013 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Retract Actuator Fuse Pin Inspection and Replacement This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Airworthiness Directive AD 2012-12-08 is related to this service bulletin.

Group 1 only: No more work is necessary on the airplane(s) that have replaced 112W1769-1 Retract Actuator Fuse Pins with 112W1769-3 Retract Actuator Fuse Pins in accordance with the Original Issue or Revision 1 of this service bulletin and have not replaced 112W1769-3 Retract Actuator Fuse Pins with 112W1769-1 Retract Actuator Fuse Pins.

Group 2 airplanes, 777-200 and 777-300 airplanes line number 164 through 1027, are added to this service bulletin effectivity. Due to an interchangeability error in the Illustrated Parts Catalog (IPC), it is possible that 112W1769-1 Retract Actuator Fuse Pins were installed on 777-200 and 777-300 airplanes line number 164 through 1027.

REASON FOR REVISION This revision is sent to update compliance time information for inspection and replacement of the 112W1769-1 fuse pin. This revision also added Group 2 airplanes.

These sections were changed:

1. In Summary, Background, added information about the addition of Group 2 airplanes.

2. In Summary, Background, added Summary Evaluation Table.

3. In Summary, Effectivity, added spares affected reference.

4. In Summary, Compliance, added FAA AD reference.

5. In Summary, Compliance, added information related to the future release of Airworthiness Directive.

6. In Paragraph 1.A.1, Airplanes, added 777-200 and 777-300 airplanes line number 164 through 1027 to Group 2.

7. In Paragraph 1.A.2, Spares Affected, added affected spares.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 5 of 34

8. In Paragraph 1.C., Reason, added information about the addition of Group 2 airplanes.

9. In Paragraph 1.E., Compliance, added FAA AD reference.

10. In Paragraph 1.E., Compliance, added information related to the future release of Airworthiness Directive.

11. In Paragraph 1.E., Compliance, updated compliance table description.

12. In Paragraph 1.E., Compliance, added effective date of Airworthiness Directive.

13. In Paragraph 1.E., Compliance added description for evaluating conditions and actions.

14. In Paragraph 1.E., Compliance, updated compliance time for All Airplanes condition.

15. In Paragraph 1.E., Compliance, updated compliance time for Condition 2A.

16. In Paragraph 1.E., Compliance, updated compliance time for Condition 2B.

17. In Paragraph 1.E., Compliance, updated compliance time for Condition 2C.

18. In Paragraph 1.E., Compliance, added Table 2 for Group 2 airplanes.

19. In Paragraph 1.F., Approval, added alternative method of compliance information for Group 1 airplanes.

20. In Paragraph 1.J.1., Existing Data, added FAA AD reference.

21. In Paragraph 1.K., Publications Affected, added Damage Tolerance Based Structural Inspections statement.

22. In Paragraph 2.A., Material - Price and Availability, updated ROLT and Unit Price information.

23. In Paragraph 3.A., General Information, deleted note 1.

24. In Paragraph 3.B., Work Instructions, Part 2, added Retract Actuator Fuse Pin part number.

25. FIGURE 1, 2, 3, and 4, added Step Table description paragraph.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY February 05, 2009Original Issue:

February 17, 2011Revision 1:

May 02, 2013Revision 2:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 6 of 34 BOEING SERVICE BULLETIN 777-32-0083

Commercial Airplanes 777 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 777-32-0083Original Issue: February 05, 2009 Revision 2: May 02, 2013 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Retract Actuator Fuse Pin Inspection and Replacement BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND Accomplishment of this service bulletin will find and replace 112W1769-1 Retract Actuator Fuse Pins. The 112W1769-1 Retract Actuator Fuse Pins have been found to crack and fail earlier than the previously determined safe life limit of the pins. A fractured Retract Actuator Fuse Pin can cause the main landing gear (MLG) to extend without restriction and attempt to lock into position under high dynamic loads. Unrestricted MLG extension could cause structural damage to the side and drag brace lock assemblies, leading to unlocked drag and/or side braces which could result in landing gear collapse during touchdown, rollout or taxi.

One operator reported that a right MLG 112W1769-1 pin sheared during normal flight operations. The failure occurred on a pin with 10,874 flight cycles. The left MLG pin was also inspected and was found to be cracked.

Examination of the sheared pin concluded that the cracking was due to fatigue. Three other pins that were reported to have cracks had between 10,000 and 11,000 flight cycles.

Subsequent to the release of Revision 1 of this service bulletin, it was found that the Illustrated Parts Catalog (IPC) allowed interchangeability of 112W1769-1 Retract Actuator Fuse Pins with 112W1769-3 Retract Actuator Fuse Pins on 777-200 and 777-300 airplanes line number 164 through 1027.

This service bulletin provides instructions to inspect the left and right MLG for 112W1769-1 Retract Actuator Fuse Pins and to replace the affected pins with 112W1769-3 pins.

Boeing Service Related Problem (SRP) 777-SRP-57-0226 is related to this service bulletin.

Boeing Service Letter (SL) 777-SL-57-011 is related to this service bulletin.

Boeing Fleet Team Digest Article (FTD) 777 FTD 57-08005 is related to this service bulletin.

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 7 of 34

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedYesSpares Affected Paragraph 1.E., ComplianceYesAD Related Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsYesKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION Get access to the left and right MLG Retract Actuator Fuse Pins. Do an inspection of the Retract Actuator Fuse Pins to identify the part number. If an affected pin is found, replace the pin. If an affected pin is not found, no further action is required at that pin location.

EFFECTIVITY 777-200 and -300 Airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.

Refer to Paragraph 1.A.2., Spares Affected for the list of affected components.

COMPLIANCE Group 1:

Federal Aviation Administration (FAA) Airworthiness Directive AD 2012-12-08 is related to this service bulletin.

Group 2:

The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the inspection, and/or repair procedures given in this service bulletin.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 8 of 34 BOEING SERVICE BULLETIN 777-32-0083

MANPOWER Elapsed HoursTotal Task HoursAirplanes

3.004.50All

MATERIAL INFORMATION Boeing and Operator Supplied Parts/Materials.

Refer to Paragraph 2.A., Material - Price and Availability.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 9 of 34 BOEING SERVICE BULLETIN 777-32-0083

Page 10OCROpen in PDF

BOEING SERVICE BULLETIN 777-32-0083

GET ACCESS TO THE LEFT AND

RIGHT MLG RETRACT ACTUATOR I

FUSE PINS THROUGH PANEL 551DB AND 651DB.

FWD LEFT MLG SHOWN;

RIGHT MLG OPPOSITE

DO AN INSPECTION OF THE RETRACT ACTUATOR FUSE PINS TO IDENTIFY THE PART NUMBER. IF AN AFFECTED PIN IS FOUND, REPLACE THE PIN. IF AN

AFFECTED PIN IS NOT FOUND, NO FURTHER ACTION IS REQUIRED FOR THAT PIN LOCATION. FWD 1742524 Original Issue: February 05, 2009 Revision 2: May 02, 2013 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 777-32-0083 Work - See page 1 for details. 10 of 34

Commercial Airplanes 777 Service Bulletin

SPECIAL ATTENTION Number: 777-32-0083 Original Issue: February 05, 2009 Revision 2: May 02, 2013 ATA System: 3211 SUBJECT: LANDING GEAR - Main Landing Gear - Retract Actuator Fuse Pin Inspection and Replacement BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

1. PLANNING INFORMATION A. Effectivity

1. Airplanes This service bulletin is for the airplanes shown below.

Refer to Service Bulletin Index Document D624W001 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

DESCRIPTIONCONFIGURATIONGROUP 777-200 and 777-300 Airplanes with line numbers 1 through 163.-1 777-200 and 777-300 Airplanes with line numbers 164 through 1027.-2 Airplane Models:

777-200, 777-300 GroupVariable Number 1WA001 - WA017 1WA076 - WA080 1WA086 - WA093 1WA101 - WA104 1WA116 - WA119 1WA131 - WA137 1WA171 - WA175 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 11 of 34

GroupVariable Number 1WA196 - WA198 1WA206 - WA211 2WA212 1WA221 - WA223 1WA231 - WA232 2WA241 - WA250 2WA261 - WA266 2WA281 - WA283 2WA301 - WA304 1WB001 - WB014 2WB015 - WB021 2WB031 - WB046 1WB051 - WB068 2WB069 - WB088 1WB101 - WB104 2WB105 - WB106 1WB121 - WB125 1WB131 - WB133 2WB134 - WB148 1WB151 - WB153 2WB154 - WB155 1WB161 - WB169 2WB170 - WB177 1WB181 - WB186 2WB187 - WB194 2WB201 - WB215 1WB231 - WB234 2WB235 - WB247 1WB271 - WB272 2WB273 1WB276 - WB286 2WB291 - WB302 1WB306 - WB307 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 05, 2009 777-32-0083Revision 2: May 02, 2013 12 of 34 BOEING SERVICE BULLETIN 777-32-0083

Pages 13–24 of 34