Copy · U.S. DOT/FAA - SB-777-54-0028-01 · 49 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0654; AD 2014-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '765b93cb652a7d95f1fe33de8fa647f48e607175305577c93d3bec466d7fcc5d'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 777 Service Bulletin

SPECIAL ATTENTION Number: 777-54-0028 Original Issue: May 25, 2012 Revision 1: December 10, 2013 ATA System: 5451 SUBJECT: NACELLES / PYLONS - Nacelle Strut - PW4000 Forward Dry Bay and Forward Engine Mount Bulkhead - Inspection Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2012 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 1 of 49

3.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 2 of 49 BOEING SERVICE BULLETIN 777-54-0028

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary9

1. PLANNING INFORMATION ........................................ 1 3 A. Effectivity ............................................... 1 3

1. Airplanes ............................................ 1 3

2. Spares Affected ........................................ 1 4 B. Concurrent Requirements ...................................... 1 4 C. Reason ................................................ 1 4 D. Description .............................................. 1 5 E. Compliance .............................................. 1 6 F. Approval ............................................... 1 9 G. Manpower .............................................. 1 9 H. Weight and Balance Changes .................................... 2 0 I. Electrical Load Data ......................................... 2 0 J. References .............................................. 2 0

1. Existing Data: ......................................... 2 0

2. Data Supplied with this Service Bulletin: ........................... 2 1

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 1 K. Publications Affected ........................................ 2 1 L. Interchangeability and Intermixability of Parts ........................... 2 1 M. Software Accomplishment Summary ................................ 2 1

2. MATERIAL INFORMATION ........................................ 2 3 A. Material - Price and Availability ................................... 2 3 B. Industry Support Information .................................... 2 3 C. Parts Necessary for Each Airplane ................................. 2 3

1. Kits/Parts ............................................ 2 3

2. Parts and Materials Supplied by the Operator ........................ 2 3

3. Parts Modified and Reidentified ................................ 2 4

4. Parts Removed and Not Replaced .............................. 2 4 D. Parts Necessary to Change Spares ................................. 2 4 E. Special Tooling - Price and Availability ............................... 2 4 F. Special Tooling Necessary to do this Service Bulletin ....................... 2 4

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 5 A. GENERAL INFORMATION ..................................... 2 5 B. WORK INSTRUCTIONS ....................................... 2 6 FIGURE 1: STRUT NO. 1 - FORWARD DRY BAY INTERIOR - GVI INSPECTION ........... 3 0 FIGURE 2: STRUT NO. 1 - FORWARD DRY BAY INTERIOR - DET INSPECTION .......... 3 2 FIGURE 3: STRUT NO. 1 - FORWARD ENGINE MOUNT BULKHEAD FITTING - DET AND HFEC INSPECTION .......................................... 3 6 FIGURE 4: STRUT NO. 2 - FORWARD DRY BAY INTERIOR - GVI INSPECTION ........... 3 8 FIGURE 5: STRUT NO. 2 - FORWARD DRY BAY INTERIOR - DET INSPECTION .......... 4 0 FIGURE 6: STRUT NO. 2 - FORWARD ENGINE MOUNT BULKHEAD FITTING - DET AND HFEC INSPECTION .......................................... 4 4 APPENDIX A: CLEANING AND REFINISHING OF STRUT FWD DRY BAY DETAILS .......... 4 6 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 3 of 49 BOEING SERVICE BULLETIN 777-54-0028

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 4 of 49 BOEING SERVICE BULLETIN 777-54-0028

BLANK PAGE

Commercial Airplanes 777 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 777-54-0028Original Issue: May 25, 2012 Revision 1: December 10, 2013 ATA System: 5451 SUBJECT: NACELLES / PYLONS - Nacelle Strut - PW4000 Forward Dry Bay and Forward Engine Mount Bulkhead - Inspection This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-11-14 is related to this service bulletin.

Airplanes WC587, WC593, WC594, and WC595 were added to the service bulletin effectivity as Group 2 Airplanes. These airplanes should accomplish the initial inspection at the compliance time in accordance with Paragraph 1.E., Compliance.

No more work is necessary on the airplanes inspected in accordance with the original issue of this service bulletin. These airplanes should repeat the inspection at the repeat interval in accordance with Paragraph 1.E., Compliance.

REASON FOR REVISION This revision is sent to:

1. Add airplanes WC587, WC593, WC594, and WC595 to the effectivity of this service bulletin as Group 2 Airplanes. Subsequent to the release of this service bulletin it was determined that a production change that was to be installed on these airplanes that would have terminated the inspections in this service bulletin could not be installed. Therefore the inspection of these airplanes in accordance with this service bulletin is required. Group 2 Airplanes are the same as Group 1 Airplanes, except for the compliance time for the initial inspection.

2. Revise compliance table and work instructions to show that finish restoration is not required until the repairs are required.

3. Clarify that hydraulic fluid contamination includes hydraulic fluid contamination in its liquid (fluid), vapor, and/or solid (coked) form.

4. Add optional leveling compound.

5. Add an alternate method of leveling compound repair for small areas that uses sealant and does not require airplane leveling.

These sections were changed:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 5 of 49

1. Summary:

a. Background - Revise to show hydraulic fluid contamination can be in the form of a liquid (fluid), vapor, or solid (coke). Revise hydraulic fluid to hydraulic fluid contamination at 4 locations.

b. Action - Revise Part 1 to show hydraulic fluid contamination can be in the form of a liquid (fluid), vapor, or solid (coke) and blistered and/or peeling primer is a sign of hydraulic fluid contamination.

c. Compliance - Add FAA AD.

2. Planning Information:

a. Paragraph 1.C., Reason:

(1) Revise to show hydraulic fluid contamination can be in the form of a liquid (fluid), vapor, or solid (coke). Revise hydraulic fluid to hydraulic fluid contamination at 4 locations.

(2) Add Reason for this revision information.

b. Paragraph 1.D., Description:

(1) Revise Part 1 to show hydraulic fluid contamination can be in the form of a liquid (fluid), vapor, or solid (coke) and blistered and/or peeling primer is a sign of hydraulic fluid contamination.

(2) Add "Compliance Information Related to This Revision".

(3) add Affected Maintenance Zone Table for Group 2 Airplanes.

c. Paragraph 1.E., Compliance:

(1) Add FAA AD.

(2) Revise Table 1, row 1 to limit condition to Group 1 Airplanes.

(3) Add Table 1, row 2 for Group 2 Airplanes. Group 2 Airplanes have initial compliance from revision 1 date, instead of from the effective date of the AD.

(4) Revise to show hydraulic fluid contamination can be in the form of a liquid (fluid), vapor, or solid (coke) in multiple locations in Table 1.

(5) Clarify that the compliance time in Table 1, second action for condition 2B is from the time Condition 2B is found.

(6) Clarify that restore sealant, primer and leveling compound can be accomplished at the same compliance time as the repair in Table 1, second action for condition 2B.

(7) Clarify that restoration of sealant, primer, and leveling compound can be accomplished at the same compliance time as the repair in Table 1, first action for condition 2C.

d. Paragraph 1.F., Approval:

(1) Add statement approving this service bulletin as an alternate method of compliance (AMOC) to FAA AD.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 6 of 49 BOEING SERVICE BULLETIN 777-54-0028

e. Paragraph 1.J.1., Existing Data:

(1) Add FAA AD.

3. Material Information:

a. Paragraph 2.C.2., Parts and Materials Supplied by the Operator:

(1) Add optional leveling compound. Change finishes to sealant, primer, and leveling compound.

4. Accomplishment Instructions:

a. Paragraph 3.A., General Information - No Changes

b. Paragraph 3.B., Work Instructions:

(1) General Work Instructions:

(a) Revise to show hydraulic fluid contamination can be in the form of a liquid (fluid), vapor, or solid (coke) in 6 locations.

(b) Move restoration of sealant, primer, and leveling compound from Part 2, Step 4 to the second action for condition 2B. Move restoration of sealant, primer, and leveling compound from Part 3, Step 4 to the first action for condition 2C.

(2) Part 1:

(a) Step 3 - Revise to show hydraulic fluid contamination can be in the form of a liquid (fluid), vapor, or solid (coke).

(3) Part 2:

(a) Delete Step 4 and move restoration of sealant, primer, and leveling compound to the second action for condition 2B.

(4) Part 3:

(a) Delete Step 4 and move restoration of sealant, primer, and leveling compound to the first action for condition 2C.

(5) FIGURE 1:

(a) Illustration: No changes.

(b) Step Table:

1) Step 1 - Revise to show hydraulic fluid can be in the form of a liquid (fluid), vapor, or solid (coke). Revise to show that blistered and/or peeling primer is a sign of hydraulic fluid contamination.

(6) FIGURE 4:

(a) Illustration: No changes.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 7 of 49 BOEING SERVICE BULLETIN 777-54-0028

(b) Step Table:

1) Step 1 - Revise to show hydraulic fluid can be in the form of a liquid (fluid), vapor, or solid (coke). Revise to show that blistered and/or peeling primer is a sign of hydraulic fluid contamination.

(7) APPENDIX A:

(a) Illustrations: No changes.

(b) Step Table:

1) Note - Add optional sealant repair.

2) Step 7 - Add optional leveling compound. Refer to optional sealant repair.

3) Step 8 - Add optional leveling compound. Refer to optional sealant repair.

4) Step 9 - Add option to use sealant to repair small areas of leveling compound. The option does not require the airplane to be leveled.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY May 25, 2012Original Issue:

December 10, 2013Revision 1:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 8 of 49 BOEING SERVICE BULLETIN 777-54-0028

Commercial Airplanes 777 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 777-54-0028Original Issue: May 25, 2012 Revision 1: December 10, 2013 ATA System: 5451 SUBJECT: NACELLES / PYLONS - Nacelle Strut - PW4000 Forward Dry Bay and Forward Engine Mount Bulkhead - Inspection BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND Accomplishment of the inspections in this service bulletin will find hydraulic fluid contamination in its liquid (fluid), vapor, and/or solid (coked) form in the strut forward dry bay, before the forward engine mount bulkhead fittings become sufficiently hydrogen embrittled that they can not carry design loads. If hydraulic fluid contamination is on the titanium forward engine mount bulkhead fittings, hydrogen embrittlement of the fittings can occur. When the forward engine mount bulkhead fitting becomes sufficiently hydrogen embrittled it cannot carry design load and loses limit load capability that can lead to the loss or departure of an engine. Similarly, hydrogen embrittlement of the fittings can cause through crack formation across the fitting. Such through cracks might not contain an engine fire and allow the fire to breach into the strut. The forward engine mount bulkhead fitting does not have fire detection or fire suppression capability. Thus, a fire breaching the forward engine mount bulkhead fitting can lead to an uncontained fire in the strut.

One operator has reported 5 airplanes with hydraulic fluid residue in the strut forward dry bay. The airplanes had approximately 9,900 to 29,000 flight-cycles and 13,000 to 33,300 flight-hours. The forward engine mount bulkhead fittings are made from titanium and are located near the hot engine core of the engine where temperatures can exceed 270 degrees Fahrenheit. The presence of hydraulic fluid contamination and temperature above 270 degrees Fahrenheit can result in hydrogen embrittlement of the titanium forward engine mount bulkhead fittings. If the forward engine mount bulkhead fittings become sufficiently hydrogen embrittled, they may not be able to carry design loads. It is believed that hydraulic fluid contamination is entering the dry bay through the condensate drain line. The condensate drain connects to the system disconnect box drain lines, which drains hydraulic fluid and fuel from the system disconnect box. The system disconnect box drain hose can clog due to hydraulic fluid coking in the drain lines. This allows hydraulic fluid to back up into strut forward dry bay through the condensate drain line. Boeing Service Bulletin 777-54-0027 addresses blockage of the strut forward drain lines. If a fitting becomes embrittled, fitting and/or strut replacement may be required. If the fitting becomes sufficiently brittle, it may not be able to carry design loads.

Inspection of the strut forward dry bay for the presence of hydraulic fluid contamination will help prevent hydrogen embrittlement of the titanium forward engine mount bulkhead fittings.

Boeing Fleet Team Digest (FTD) 777 FTD 54-11001 is related to this service bulletin.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 9 of 49

Boeing Service Related Problem (SRP) 777-SRP-54-0138 is related to this service bulletin.

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedNoSpares Affected Paragraph 1.E., ComplianceYesAD Related Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedNoPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsNoKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator NoOperator Supplied Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION Part 1 - Strut Forward Dry Bay Hydraulic Fluid Contamination GVI Inspection Open the thrust reverser. Remove the strut forward dry bay access door. Do a General Visual Inspection (GVI) for hydraulic fluid contamination in its liquid (fluid), vapor, and/or solid (coked) form. Blistered and/or peeling primer is a sign of hydraulic fluid contamination and the strut forward dry bay is contaminated. Install the strut forward dry bay access door. Close the thrust reverser.

Part 2 - Strut Forward Dry Bay Interior DET Inspection Open the thrust reverser. Remove the strut forward dry bay access door. Do a Detailed Inspection (DET) of the interior of the strut forward dry bay for hydraulic fluid coking, heat discoloration, damage to sealant and primer, damage to leveling compound, cracks; and etching or pitting. Clean and restore sealant, primer, and leveling compound of the detail parts in the strut forward dry bay if missing, blistered, peeling, or damaged. Check drain lines and clean or replace drain lines as required. Install the strut forward dry bay access door. Close the thrust reverser.

Part 3 - Strut Forward Engine Mount Bulkhead Fitting DET and HFEC Inspection Open the thrust reverser. Remove the strut forward dry bay access door. Do a DET and High Frequency Eddy Current (HFEC) inspection of the strut forward engine mount bulkhead upper and lower fittings for cracks, and etching or pitting. Clean and restore sealant, primer, and leveling compound of the detail parts in the strut forward dry bay if missing, blistered, peeling, or damaged. Check drain lines and clean or replace drain lines as required.

Install the strut forward dry bay access door. Close the thrust reverser.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 10 of 49 BOEING SERVICE BULLETIN 777-54-0028

EFFECTIVITY 777-200 and -300 Airplanes powered by PW4000 Engines. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.

COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-11-14 is related to this service bulletin.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of June 15, 2011. Please refer to Paragraph

2.B., Industry Support Information.

MANPOWER Elapsed HoursTotal Task Hours

3.005.00Part 1 - Strut Forward Dry Bay Hydraulic Fluid Contamination GVI Inspection

12.5017.00Part 2 - Strut Forward Dry Bay Interior DET Inspection

12.5017.00Part 3 - Strut Forward Engine Mount Bulkhead Fitting DET and HFEC Inspection

MATERIAL INFORMATION Operator Supplied Parts/Materials.

Refer to Paragraph 2.A., Material - Price and Availability.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 25, 2012 777-54-0028Revision 1: December 10, 2013 11 of 49 BOEING SERVICE BULLETIN 777-54-0028

Page 12OCROpen in PDF

BOEING SERVICE BULLETIN 777-54-0028 432AR (STRUT NO.1) 442AR (STRUT NO.2)

LEFT STRUT

FORWARD ENGINE

MOUNT BULKHEAD

UPPER FITTING

MOLOWER FITTING PART 1:

DO A GVI FOR HYDRAULIC FLUID

CONTAMINATION PART 2:

DO A DET FOR HYDRAULIC FLUID

COKING, HEAT DISCOLORATION, DAMAGE

TO SEALANT AND PRIMER, DAMAGE TO

LEVELING COMPOUND, CRACKS, AND ETCHING OR PITTING.

PART 3:

DO A DET AND HFEC OF THE UPPER

AND LOWER ENGINE MOUNT

BULKHEAD FITTINGS FOR CRACKS FWD AND ETCHING OR PITTING.

STRUT FORWARD DRY BAY (STRUT NO. 1 SHOWN; STRUT NO. 2 OPPOSITE) CONDENSATE DRAIN 2125481 Original Issue: May 25, 2012 Revision 1: December 10, 2013 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 777-54-0028 Work - See page 1 for details. 12 of 49

Pages 13–24 of 49