Copy · U.S. DOT/FAA - Service Bulletin · 128 pages

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2010-0436; AD 2011-07-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'ebfa5a265bbdd75f3ee58f7d5539a93fc8786c460e6e0a39eb8f26ca06ef3df9'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1 of 1 SB 601R- - - 30- - - 031Feb 03/2010

SERVICE BULLETIN

REVISION TRANSMITTAL SHEET CL- - -600- - -2B19Canadair Regional Jet (CRJ) Aircraft SERVICE BULLETIN 601R - - -30 - - -031 S U B J E C T: I c e a n d R a i n P r o t e c t i o n --- W i n g A n t i --- I c i n g S y s t e m --- I n s t a l l a t i o n o f L o w Heat Detection- - -Switches on the Leading Edge This page transmits:

Revision D of Service Bulletin 601R- - - 30- - - 031, pages 1 thru 126, dated Feb 03/2010.

The changes in this revision have no effect on aircraft that have incorporated a previous issue of this service bulletin.

Reason:

Revised Accomplishment Instructions, paragraph 2., to:

Change the data in a wire table of PART D.

Add the P/N of the crimping tool for terminal lug P/N MS20659- - - 101.

Add an alternate task for the operational test of the wing anti- - - ice ducts.

This revision also includes small editorial changes that do not have an effect on the technical content.

Instructions:

Discard the copy of Service Bulletin 601R- - - 30- - - 031, Revision C, dated Dec 23/ 2009.

Replace with the copy attached.

Service Bulletin History:

Initial issue, dated May 15/2009.

Revision A, dated Sep 08/2009.

Revision B, dated Oct 28/2009.

Revision C, dated Dec 23/2009.

Page 1 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010

SERVICE BULLETIN T echnical Publications THIS SERVICE BULLETIN IS SENT TO EACH OPERATOR. IF THE OPERATOR HAS LEASED

HAS SOLD AIRCRAFT OR TRANSFERRED SPARES IN THE LAST SIX MONTHS, THIS SERVICE

BULLETIN MUST BE SENT TO THE NEW OWNER, UNLESS CONFIRMATION WAS RECEIVED

THAT BOMBARDIER COMMERCIAL AIRCRAFT HAS INCLUDED THE NEW OPERATOR AIRCRAFT , THIS SERVICE BULLETIN MUST BE SENT TO THE LESSEE. IF THE OPERATOR ON THE DISTRIBUTION LIST .

ATA SYSTEM: 30- - -12 NUMBER: 601R - - -30- - -031 S U B J E C T: I c e a n d R a i n P r o t e c t i o n --- W i n g A n t i --- I c i n g S y s t e m --- I n s t a l l a t i o n o f L o w Heat Detection- - -Switches on the Leading Edge

1. PLANNING INFORMATION A. Effectivity

(1) Aircraft Affected:

Service Bulletin: CL- - - 600- - - 2B19 Canadair Regional Jet (CRJ) Aircraft Serial Numbers 7003 thru 7067, 7069 thru 7990 and 8000 thru 8101.

Production: This change will be incorporated before delivery on Aircraft Serial Numbers 8102 and subsequent.

NOTE: The instructions in this service bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aerospace Service Bulletin(s). Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure this bulletin can be completed.

NOTE: The procedure in this service bulletin was validated on Aircraft Serial Number 7028.

SERVICE BULLETIN 601R- - -30- - -031 Page 2 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010 B. Reason

(1) Condition It is possible for the Wing Anti- - -Ice (WAI) system to not correctly sense low heat on the outboard leading edges.

(2) Evidence The wing anti- - -ice system of some aircraft in service did not correctly sense a low heat condition on the wing during a malfunction of the piccolo duct.

(3) Objective/Benefit This service bulletin gives the procedure to install two low heat detection- - -switches on the outboard leading edge. This will monitor the temperature and indicate low heat conditions at the wing tip during all phases of the flight.

C. Description This service bulletin is divided into six parts: PART A, PART B, PART C, PART D, PART E and PART F .

PART A - - - Installation of the Low Heat Detection - - -Switches on the Left Wing Circuit breakers are opened. The electrical power is removed. Access panels are removed. The left leading edges are removed.

The shroud is removed from the outboard leading edge. Holes are drilled through the outboard leading edge and the shroud. Two low heat detection- - -switches (written as “thermal switches” in this service bulletin) are installed in outboard leading edge.

New wires are installed from the thermal switches to a connector on the wing. The shroud is installed on the outboard leading edge. The left leading edges are installed. The circuit breakers are closed. The electrical power is applied.

For Aircraft that have incorporated PART A from the initial issue of this service bulletin PART B - - - Activation of the Low Heat Detection - - -Switches Circuit breakers are opened. The electrical power is removed. The Data Concentrator Units (DCUs) are removed. In the main avionics- - -compartment, two wires per DCUs are connected. The circuit breakers are closed. The electrical power is applied. The operational test of the outboard low heat detection- - -switches and the DCUs are done.

SERVICE BULLETIN 601R- - -30- - -031 Page 3 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010 For all Aircraft PART C - - - Installation of the Low Heat Detection - - -Switches on the Right Wing Circuit breakers are opened. The electrical power is removed. Access panels are removed. The leading edges are removed.

The shroud is removed from the outboard leading edge. Holes are drilled through the outboard leading edge and the shroud. Two thermal switches are installed in the outboard leading edge.

New wires are installed from the thermal switches to a connector on the wing. The shroud is installed on the outboard leading edge. The leading edges are installed.

The circuit breakers are closed. The electrical power is applied.

PART D - - - Installation of the Wing A/ICE box assembly on the Left Side of the Main Avionics- - -Compartment Circuit breakers are opened. The electrical power is removed. Some passenger seats on the left side are removed. Floor covering and some floor panels are removed. Access panels are removed. DCU 1, the Global Positioning Unit Sensor Unit (GPSU 1) and the Attitude and Heading Computer (AHC 1) are removed.

New wires are installed from connector J423, at FS409L+128, to the main avionics- - -compartment. The wires to DCU 1 are caped and stowed. The WING A/ICE box assembly is installed and connected. Circuit breakers, on the WING A/ICE box assembly, are opened. AHC 1, GPSU1 and the DCUs are installed. The circuit breakers are closed. The electrical power is applied.

The access panels are installed. The floor panels and floor covering are installed.

The passenger seats are installed.

PART E - - - Installation of the wires for the Wing A/ICE box assembly on the Right Side of the Main Avionics- - -Compartment Circuit breakers are opened. The electrical power is removed. Some passenger seats on the right side are removed. Floor covering and some floor panels are removed. Access panels are removed.

New wires are installed from connector J422, at FS409R+128, to the main avionics- - -compartment. The wires to DCU 2 are caped and stowed. If DCU 3 is installed, the wires to DCU 3 are caped and stowed. DCU 2 is installed. If applicable, DCU 3 is installed. The circuit breakers are closed. The electrical power is applied.

The access panels are installed. The floor panels and floor covering are installed.

The passenger seats are installed.

SERVICE BULLETIN 601R- - -30- - -031 Page 4 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010 PART F - - - Activation of the Low Heat Detection - - -Switches NOTE: PART A, PART C, PART D and PART E are prerequisites to do PART F.

Circuit breakers are opened. The avionics- - -compartment door is opened. In the main avionics- - -compartment, some wires are unstowed and connected to the connectors of the WING A/ICE box assembly. The lockrings are removed from the circuit breakers of the WING A/ICE box assembly. The circuit breakers are closed.

The electrical power is applied. The operational test of the outboard low heat detection- - -switches is done.

D. Compliance For Aircraft that have incorporated PART A from the initial issue of this service bulletin Recommended Service Bulletin. Bombardier Aerospace recommends that PART B o ft h ei n i t i a li s s u eo rs u b s e q u e n tr e v i s i o no ft h i ss e r v i c eb u l l e t i nb ed o n en om o r e than 24 months from the initial release date on this service bulletin, unless otherwise directed by the airworthiness authority of the operator.

For Aircraft that have not incorporated the initial issue of this service bulletin Recommended Service Bulletin. Bombardier Aerospace recommends that PART A, PART C, PART D, PART E and PART F of this service bulletin be done no more than 24 months from the initial release date on this service bulletin, unless otherwise directed by the airworthiness authority of the operator.

For Aircraft 7003 thru 7067, 7069 thru 7990 and 8000 thru 8095 NOTE: Service Bulletin 601R- - - 31- - - 034 Indicating and Recording Systems - - - General - - - Data Concentrator Unit (DCU- - - 4000) Update is a prerequisite to PART B and PART F of this service bulletin.

For all Aircraft NOTE: When this service bulletin is incorporated, use Airplane Flight Manual (AFM) Temporary Revision TR RJ/164- - -2 or subsequent applicable revision.

This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage T olerance inspections (DTIs).

E. Approval The technical content of this service bulletin has been approved under the authority of the TCCA Design Approval Organization No: DAO #93- - -Q- - -02.

SERVICE BULLETIN 601R- - -30- - -031 Page 5 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010 F. M a n p o w e r Man hours given below are an estimate for direct labor done by an experienced crew on an aircraft prepared for maintenance.

These estimates do not include the time necessary for:

− Administrative functions such as planning, liaison, familiarization, and report writing.

− Non productive elapsed time such as rest time, having meals, and crew shift changes.

− Elapsed time such as for paint to dry, sealant to cure, and fuel tank venting.

− Preparation for modification (unless specified in the accomplishment instructions) such as cleaning and getting parts, tools, consumables, and ground equipment.

− Quality assurance inspections, troubleshooting and/or correction of discrepancies found when a task is done.

− All other activities that are not considered by Bombardier Aerospace as directly related to the accomplishment of this procedure.

NOTE: For on- - -site labor assistance, please speak with a Fleet Services representative for a quote. The Fleet Services Team can be contacted via the CRC at 514- - - 855- - - 8500 or email at thd.crj@aero.bombardier.com.

PART A - - - Installation of the Low Heat Detection - - -Switches on the Left Wing It will take an estimated 18.0 man- - - hours to complete this service bulletin. The man- - - hours are divided as shown in the table that follows:

TASK M A N --- H O U R S ( 2 ) J o b S e t --- U p 4.0

(3) Procedure 8.0

(4) T est 0.0¡

(5) Job Close- - -Out 6.0 ¡ Does not include the time to do AMM 20- - - 10- - - 00- - - 910- - - 803

SERVICE BULLETIN 601R- - -30- - -031 Page 6 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010 PART B - - - Activation of the Low Heat Detection - - -Switches It will take an estimated 5.0 man- - -hours to complete PART B of this service bulletin.

The man- - - hours are divided as shown in the table that follows:

TASK M A N --- H O U R S ( 2 ) J o b S e t --- U p 0.5

(3) Procedure 2.0

(4) T est 2.0

(5) Job Close- - -Out 0.5 PART C - - - Installation of the Low Heat Detection - - -Switches on the Right Wing It will take an estimated 18.0 man- - - hours to complete this service bulletin. The man- - - hours are divided as shown in the table that follows:

TASK M A N --- H O U R S ( 2 ) J o b S e t --- U p 4.0

(3) Procedure 8.0

(4) T est 0.0¡

(5) Job Close- - -Out 6.0 ¡ Does not include the time to do AMM 20- - - 10- - - 00- - - 910- - - 803

SERVICE BULLETIN 601R- - -30- - -031 Page 7 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010 PART D - - - Installation of the Wing A/ICE box assembly on the Left Side of the Main A v i o n i c s --- C o m p a r t m e n t It will take an estimated 18.0 man- - - hours to complete this service bulletin. The man- - - hours are divided as shown in the table that follows:

TASK M A N --- H O U R S ( 2 ) J o b S e t --- U p 4.0

(3) Procedure 10.0

(4) T est 0.0 ¡

(5) Job Close- - -Out 4.0 ¡ Does not include the time to do AMM 20- - - 10- - - 00- - - 910- - - 803 PART E - - - Installation of the wires for the Wing A/ICE box assembly on the Right Side of the Main Avionics- - -Compartment It will take an estimated 13.0 man- - - hours to complete this service bulletin. The man- - - hours are divided as shown in the table that follows:

TASK M A N --- H O U R S ( 2 ) J o b S e t --- U p 4.0

(3) Procedure 6.0

(4) T est 0.0 ¡

(5) Job Close- - -Out 3.0 ¡ Does not include the time to do AMM 20- - - 10- - - 00- - - 910- - - 803

SERVICE BULLETIN 601R- - -30- - -031 Page 8 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010 PART F - - - Activation of the Low Heat Detection - - -Switches It will take an estimated 4.0 man- - -hours to complete this service bulletin. The man- - - hours are divided as shown in the table that follows:

TASK M A N --- H O U R S ( 2 ) J o b S e t --- U p 0.5

(3) Procedure 1.5

(4) T est 1.5

(5) Job Close- - -Out 0.5 G. Material - - - Price and Availability

(1) The kits in the table that follows are available from Bombardier Aerospace Regional Aircraft. Refer to the paragraphs below for terms and conditions.

NOTE: For a list of the kit contents, refer to paragraph 3.A.

KIT NUMBER NAME 601R30- - - 031K2A W i n g A / I c e S y s t e m --- ( L e f t W i n g ) 601R30- - - 031K3A Wing A/Ice System- - - (Right Wing) 601R30- - - 031K4 Wing A/Ice System- - -(Left Fuselage) 601R30- - - 031K5 Wing A/Ice System- - - (Right Fuselage) 601R30- - - 031K6 Wing A/Ice System- - -(Final Installation)

SERVICE BULLETIN 601R- - -30- - -031 Page 9 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010

(2) Please send a purchase order to the address below to schedule the kit:

Bombardier Service Bulletin Kit Support T eam 123 Garratt Blvd, N42- - - 24 T oronto, Ontario Canada M3K 1Y5 Fax: 416- - - 375- - - 3060 Phone: 416- - - 375- - - 3920 Email: sbkits@aero.bombardier.com Please contact the Service Bulletin Kit Support T eam at the address above for terms and conditions.

For Aircraft that have not incorporated PART A and PART C of this service bulletin and that have ordered kits 601R30 - - -031K2 and 601R30 - - -031K3

(3) It is possible that the parts in the table that follows are replaced during the incorporation of PART A and PART C of this service bulletin. These parts are available from Bombardier Commercial Aircraft.

PART NUMBER NAME QUANTITY 202K153- - - 25- - - 01/225- - - 0 Boot 2 600- - - 052- - - 1 Strap 2

(4) Please send a purchase order to the address below to schedule the parts:

Bombardier Service Bulletin Kit Support T eam 123 Garratt Blvd, N42- - - 24 T oronto, Ontario Canada M3K 1Y5 Fax: 416- - - 375- - - 3060 Phone: 416- - - 375- - - 3920 Email: sbkits@aero.bombardier.com Please contact the Service Bulletin Kit Support T eam at the address above for terms and conditions.

(5) Refer to paragraph 3.B. for a list of consumables for this service bulletin.

H. T ooling - - - Price and Availability There are no tool kits for this service bulletin.

SERVICE BULLETIN 601R- - -30- - -031 Page 10 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010 I. Weight and Balance PART A - - - Installation of the Low Heat Detection - - -Switches on the Left Wing WEIGHT ARM MOMENT ¡

1.0 (lb) 510.4 (in.) 0.510 ( 1000 lb--- in.)

0.5 (kg) 12.96 (m) 0.006 (1000 kg- - - m) ¡ The value in the Moment column is divided by 1000. Refer to the Weight & Balance Manual CSP A- - - 041.

PART B - - - Activation of the Low Heat Detection - - -Switches Not changed.

PART C - - - Installation of the Low Heat Detection - - -Switches on the Right Wing WEIGHT ARM MOMENT ¡

1.0 (lb) 510.4 (in.) 0.510 ( 1000 lb--- in.)

0.5 (kg) 12.96 (m) 0.006 (1000 kg- - - m) ¡ The value in the Moment column is divided by 1000. Refer to the Weight & Balance Manual CSP A- - - 041.

PART D - - - Installation of the Wing A/ICE box assembly on the Left Side of the Main A v i o n i c s --- C o m p a r t m e n t WEIGHT ARM MOMENT ¡

2.1 (lb) 280.3 (in.) 0.589 ( 1000 lb--- in.)

1.0 (kg) 7.12 (m) 0.007 (1000 kg- - - m) ¡ The value in the Moment column is divided by 1000. Refer to the Weight & Balance Manual CSP A- - - 041.

SERVICE BULLETIN 601R- - -30- - -031 Page 11 of 126 SB 601R- - - 30- - - 031May 15/2009 Revision D, Feb 03/2010 PART E - - - Installation of the wires for the Wing A/ICE box assembly on the Right Side of the Main Avionics- - -Compartment WEIGHT ARM MOMENT ¡

0.4 (lb) 338.9 (in.) 0.136 ( 1000 lb--- in.)

0.2 (kg) 8.61 (m) 0.002 (1000 kg- - - m) ¡ The value in the Moment column is divided by 1000. Refer to the Weight & Balance Manual CSP A- - - 041.

For aircraft that have the third DCU option (CR31- - - 310 or CR31- - - 001), it is necessary to add the table that follows:

WEIGHT ARM MOMENT ¡

0.1 (lb) 281.8 (in.) 0.028 ( 1000 lb--- in.)

0.05 (kg) 7.16 (m) 0.0003 (1000 kg- - - m) ¡ The value in the Moment column is divided by 1000. Refer to the Weight & Balance Manual CSP A- - - 041.

PART F - - - Activation of the Low Heat Detection - - -Switches Not changed.

J. Electrical Load Data Not changed.

K. References Restriction and/or Special Instruction (RSI) C- - -A220.

Modification Summary TC601R17364, Revision N.

Service Non Incorporated Engineering Order K601R54002 SNIEO S04 Service Non Incorporated Engineering Order K601R50586 SNIEO S04 Aircraft Maintenance Manual, CSP A- - - 001.

Electrical/Electronic Components - - - Standard Practices Manual (ESPM), CSP A- - - 115.

For Bombardier Aerospace reference only: PCA 04858.

Pages 13–24 of 128