Copy · U.S. DOT/FAA - Service Bulletin 601R-32-110 · 20 pages

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2014-0489; AD 2014-23-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextOCR

This text is OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'b591069ba044acc502d5da489e76fcaa1acb4798205a5d1ec2668784e5e4a70e'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

BOMBARDIER

SERVICE BULLETIN Technical Publications THIS SERVICE BULLETIN IS SENT TO EACH OPERATOR. IF THE OPERATOR HAS LEASED AIRCRAFT, SEND THIS SERVICE BULLETIN TO THE LESSEE. IF THE OPERATOR HAS SOLD AIRCRAFT OR

TRANSFERRED SPARES IN THE LAST SIX MONTHS, SEND THIS SERVICE BULLETIN TO THE NEW

OWNER, UNLESS CONFIRMATION WAS RECEIVED THAT BOMBARDIER HAS INCLUDED THE NEW OPERATOR ON THE DISTRIBUTION LIST.

ATA SYSTEM: 32-43 NUMBER: 601R-32-110 SUBJECT: Landing Gear - Brake System - Installation of a Bracket to Prevent Connection of the Hydraulic Lines of the Brakes to the Incorrect Swivel Assembly Ports

1. PLANNING INFORMATION A. Effectivity

(1) Aircraft Affected:

Service: CL-600-2B19 aircraft serial numbers 7003 thru 7067, 7069 thru 7990, and 8000 thru 8999.

Production: There is no production effectivity at this time.

NOTE: The instructions in this service bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier service bulletins. Before you do this service bulletin, examine all Supplemental Type Certificates (STCs), and Supplemental Type Approvals (STAs) or equivalent action changes to make sure you can complete this service bulletin.

Dec 19/2013 SB 601R-32-110 Page 1 of 16

Page 2OCROpen in PDF

SERVICE BULLETIN 601R-32-110 B. Reason

(1) Condition The inboard and the outboard hydraulic lines of the brakes can be connected to the incorrect port on the swivel assembly of the Main Landing Gear (MLG).

The incorrect installation of the brake hydraulic lines can cause the brakes and/or the anti-skid system to operate incorrectly.

(2) Evidence During in-service maintenance, some inboard and outboard hydraulic lines of the brakes were found connected to the incorrect ports on the swivel assembly of the MLG.

(3) Objective/Benefit This service bulletin gives the procedure to install a new bracket on the left and the right lower aft wing-planks. The bracket will prevent the hydraulic brake lines to be connected to the incorrect ports on the swivel assembly of the MLG.

C. Description The landing gear lockpins are installed. If necessary, the aircraft is put on jacks.

The swivel assembly and the inboard brake hydraulic line installation is verified and changed if necessary. A bracket is installed on the left and the right lower aft wing-planks. If the aircraft was put on jacks, the aircraft is removed from the jacks.

The operational test of the brake system is done.

D. Compliance Recommended service bulletin.

Bombardier recommends that this service bulletin be done at no more than 6600 flight hours from the release date on this service bulletin or before Mar 29/2017, whichever comes first, unless otherwise directed by the airworthiness authority of the operator.

For Business/Corporate operators (i.e. operators who do not have a commercial airline operation), Bombardier recommends that this service bulletin be done no later than Mar 29/2017.

This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage Tolerance Inspections (DTIs).

E. Approval The technical content of this service bulletin has been approved under the authority of the TCCA Design Approval Organization No: DAO #93-Q-02.

Dec 19/2013 SB 601R-32-110 Page 2 of 16

Page 3OCROpen in PDF

SERVICE BULLETIN 601R-32-110 F. Manpower The man-hours given below are estimates for direct labor done by an experienced crew on an aircraft prepared for maintenance.

These estimates do not include the time necessary for:

-Administrative functions such as planning, liaising, familiarization, and report writing.

-Non-productive elapsed time such as rest time, having meals, and crew shift changes.

-Elapsed time such as for paint to dry, sealant to cure, and fuel tank venting.

-Preparation for modification (unless specified in the Accomplishment Instructions) such as cleaning and getting parts, tools, consumables, and ground equipment.

-Quality assurance inspections, troubleshooting and/or correction of discrepancies found when a task is done.

-All other activities that are not considered by Bombardier as directly related to the accomplishment of this procedure.

NOTE: For on-site labor assistance, please speak with a Fleet Services representative for a quote. Contact the Fleet Services Team through the CRC at 514-855-8500 or e-mail at thd.crj@aero.bombardier.com.

It will take an estimated 7.50 man-hours to complete this service bulletin. The man-hours are divided in the table that follows (elapsed cure time is not included in the man-hour summary given above):

TASK MAN-HOURS

(1) Job Set-Up 1.25

(2) Procedure 4.00

(3) Test 1.00

(4) Job Close-Out 1.25 Dec 19/2013 SB 601R-32-110 Page 3 of 16

Page 4OCROpen in PDF

SERVICE BULLETIN 601R-32-110 G. Material - Price and Availability

(1) The kits in the tables that follow are available from Bombardier.

NOTE: For a list of kit contents, refer to paragraph 3.A.

KIT NUMBER NAME 601R32-110K1 Anti Brake Line Inversion Kit

(2) Please send a purchase order to the address below to schedule kit delivery:

Bombardier Service Bulletin Kit Support Team 123 Garratt BIvd, N42-24 Toronto, Ontario Canada M3K 1Y5 Fax: 416-375-3060 Phone: 416-375-3920 e-mail: sbkits@aero.bombardier.com Please contact the Service Bulletin Kit Support Team at the address above for terms and conditions.

(3) The parts in the table that follows can be necessary to do this service bulletin if kit 601 R32-110K1 is not used and are available from Bombardier.

PART NUMBER NAME QTY B0206002AG6-6 Hi-Lite Pin 5 B0203013-3 Collar 5 HST111AG6-6 Hi-Lite Pin (1st oversize) 5 B0203038-3 Collar (1st oversize) 5 Dec 19/2013 SB 601R-32-110 Page 4 of 16

Page 5OCROpen in PDF

SERVICE BULLETIN 601R-32-110

(4) Please send a purchase order to the address below to schedule part delivery:

Bombardier Service Bulletin Kit Support Team 123 Garratt Blvd, N42-24 Toronto, Ontario Canada M3K 1Y5 Fax: 416-375-3060 Phone: 416-375-3920 e-mail: sbkits@aero.bombardier.com Please contact the Service Bulletin Kit Support Team at the address above for terms and conditions.

(5) Refer to paragraph 3.B. for a list of consumables for this service bulletin.

For Business/Corporate Operators All Business/Corporate operators (i.e. operators who do not have a commercial airline operation) refer to SB 800-00-004 for commercial policy coverage and logistics/planning arrangements (refer to www.cic.bombardier.com/technical library/service bulletins/challenger/850/SB 800-00-004).

To place an order for parts or kits, please call Bombardier Parts Logistics at 514-855-2999 or 1-866-538-1247.

H. Tooling - Price and Availability There are no tool kits for this service bulletin. Refer to paragraph 3.C. for a list of special tools and equipment for this service bulletin.

Weight and Balance Not changed.

J. Electrical Load Data Not changed.

K. References Refer to the SB Introduction document for definition or explanation of service bulletin content.

Restriction and/or Special Instruction (RSI) C-A284 Modification Summary TC601R18330, Revision B Aircraft Maintenance Manual (AMM) Structural Repair Manual (SRM) For Bombardier reference only: PCA 6666 Dec 19/2013 SB 601R-32-110 Page 5 of 16

Page 6OCROpen in PDF

SERVICE BULLETIN 601R-32-110 L. Other Publications Affected None.

M. Relationship Chart Not applicable.

Dec 19/2013 SB 601R-32-110 Page 6 of 16

Page 7OCROpen in PDF

SERVICE BULLETIN 601R-32-110

2. ACCOMPLISHMENT INSTRUCTIONS Reference Information

REFERENCE DESIGNATION AMM 07-11-01-582-801 Put the Aircraft on Jacks AMM 07-11-01-582-804 Removal of the Aircraft from Jacks AMM 10-11-00-400-801 Installation of the Nose Landing Gear Lockpin AMM 10-11-00-400-802 Installation of the Main Landing Gear Lockpins AMM 32-11-20-400-801 Installation of the Upper Brake Swivel Assembly AMM 32-43-00-710-801 Operational Test of the Brake System SRM 51-23-00 Pressure, Environmental, Fuel Tank and Firewall Sealing SRM 51-25-06 Fluid-Resistant (FR) Epoxy Primer SRM 51-25-16 Fluid-Resistant (FR) Polyurethane Topcoat SRM 51-26-00 Cleaning SRM 51-42-21 Hi-Lite Fasteners Tolerance Information Linear Tolerances Angular Tolerance X.XX in. (X.X mm) X.X in. (X mm) +/- 0.03 in. +/- 0.1 in. +/-0° 30" +/- 0.8 mm +/- 3 mm NOTE: The tolerances above apply to the dimensions given in this service bulletin, except when specified differently.

Dec 19/2013 SB 601R-32-110 Page 7 of 16

Page 8OCROpen in PDF

SERVICE BULLETIN 601R-32-110 A. Job Set-Up

(1) Make sure that the NG and MLG lockpins are installed (refer to AMM 10-11-00-400-801 and 10-11-00-400-802).

(2) If necessary, put the aircraft on jacks (refer to AMM 07-11-01-582-801).

B. Procedure NOTE: This procedure is applicable to the left and the right sides. The procedure that follows is written for the left side. The differences are given.

Refer to Figure 1.

(1) Make sure the forward port of the swivel assembly points down, in the direction of the lower aft wing-plank.

(2) Make sure that the hydraulic line of the inboard brake is connected to the forward port of the swivel assembly.

(3) If necessary, align the swivel assembly and connect the hydraulic line of the inboard brake to the forward port of the swivel assembly (refer to AMM 32-11-20-400-801).

(4) Clean the work area with solvent (refer to SRM 51-26-00).

(5) Remove and discard the Hi-Lite pins (1) and the collars (2) from the lower aft wing-plank and the lower wing skin.

(6) Install the laminated shim (3) and the bracket (4) as follows:

NOTE: The laminated shim (3) and the bracket (4) can be made as shown in Appendix A of this service bulletin or are available from Bombardier (kit number 601R32-110K1).

(a) Peel the laminated shim (3) until the bracket (4) sits flat on the lower aft wing-plank.

(b) Temporarily secure the laminated shim (3) and the bracket (4) to the lower att wing-plank as follows:

NOTE: A minimum edge distance of 1.5D is necessary.

Put the laminated shim (3) and the bracket (4) on the lower aft wing-plank as follows:

Dec 19/2013 SB 601R-32-110 Page 8 of 16

Page 9OCROpen in PDF

SERVICE BULLETIN 601R-32-110 Make sure that the forward and aft edges of the laminated shim (3) are aligned with the forward and aft edges of the bracket (4).

Make sure that the inboard edge of the laminated shim (3) and the inboard edge of the bracket (4) are aligned with the inboard edge of the lower aft wing-plank.

Make sure there is a clearance of 0.25 in. (6.4 mm) between the aft edge of the bracket (4) and the mounting trunnion of the MLG, as shown on Sheet 3, View D.

Make sure that there is a minimum clearance of 0.130 in.

(3.30 mm) between the forward edge of the bracket (4) and the fitting of the hydraulic line, as shown on Sheet 3, View D.

2 Measure the diameter of the two holes in the lower aft wing-plank and the lower wing skin where the two Hi-Lite pins (1) were removed.

If the diameter of one or the two holes in the lower aft wing-plank and/or the lower wing skin is/are 0.1850 in. (4.699 mm) or more, do as follows:

Backdrill the holes) from the lower aft wing-plank and the lower wing skin to the laminated shim (3) and the bracket (4).

Increase the diameter of the hole(s) to 0.1981-0.2011 in.

(5.032-5.108 mm) in the lower aft wing-plank, the lower wing skin, the laminated shim (3), and the bracket (4).

4 If the diameter of one or the two holes in the lower aft wing-plank and/or the lower wing skin is/are less than 0.1850 in. (4.699 mm), do as tollows:

a Backdrill the hole(s) from the lower aft wing-plank and the lower wing skin to the laminated shim (3) and the bracket (4).

Increase the diameter of the hole(s) to 0.1850-0.1880 in.

(4.699-4.775 mm) in the lower aft wing-plank, the lower wing skin, the laminated shim (3), and the bracket (4).

(C) Remove the laminated shim (3) and the bracket (4).

(d) Remove burrs and sharp edges from the laminated shim (3) and the bracket (4).

Dec 19/2013 SB 601R-32-110 Page 9 of 16

Page 10OCROpen in PDF

SERVICE BULLETIN 601R-32-110

(e) If necessary, remove burrs and sharp edges from the lower aft wing-plank and the lower wing skin.

(f) Clean the work area with solvent (refer to SRM 51-26-00).

(g) Do the final installation of the laminated shim (3) and the bracket (4) on the lower aft wing-plank as follows:

1 Apply faying surface sealant on the mating surface of the bracket

(4) (refer to SRM 51-23-00).

Apply faying surface sealant on the mating surface of the laminated shim (3) (refer to SRM 51-23-00).

Install the laminated shim (3) and the bracket (4) on the lower aft wing-plank with the Hi-Lite pins (5) wet with sealant with their heads on the lower side and the collars (6) (refer to SRM 51-23-00 and SRM 51-42-21).

Apply injection sealant on the area between the laminated shim (3), the bracket (4), and the radius of the lower aft wing-plank, as shown on Sheet 3, View C (refer to SRM 51-23-00).

5 Apply fluid-resistant primer to the head of the Hi-Lite pins (5) and the collars (6) (refer to SRM 51-25-06).

Apply polyurethane topcoat to the head of the Hi-Lite pins (5) and the collars (6) (refer to SRM 51-25-16).

C. Job Close-Out

(1) Remove all tools, equipment, and unwanted materials from the work area.

(2) If the aircraft was put on jacks, remove the aircraft from the jacks (refer to AMM 07-11-01-582-804).

(3) Do the operational test of the brake system (refer to AMM 32-43-00-710-801).

(4) When this service bulletin is completed, make this entry in the applicable logbooks: "Service Bulletin 601R-32-110, Landing Gear - Brake System - Installation of a Bracket to Prevent Connection of the Hydraulic Lines of the Brakes to the Incorrect Swivel Assembly Ports."

Dec 19/2013 SB 601R-32-110 Page 10 of 16

Page 11OCROpen in PDF

SERVICE BULLETIN 601R-32-110

VIEW LOOKING FORWARD

NOTE IN LEFT MLG BAY

1. Left side shown, right side opposite.

BRAKE OUTBOARD

HYDRAULIC LINE (REF) AFT

•PORT (REF) SWIVEL

ASSEMBLY (REF) FORWARD rsb601r32110_008.dg, kp, December 16, 2013

PORT (REF) FWD

BRAKE INBOARD

HYDRAULIC LINE (REF) Swivel Assembly - Bracket Installation Figure 1 (Sheet 1 of 4) Dec 19/2013 SB 601R-32-110 Page 11 of 16

Page 12OCROpen in PDF

SERVICE BULLETIN 601R-32-110 NOTES

1. Left side shown, right side opposite.

2. Some hydraulic lines are not shown for clarity.

LEGEND VIEW LOOKING FORWARD

IN LEFT MLG BAY

1. Pin, Hi-Lite.

2. Collar. SWIVEL

ASSEMBLY (REF) FORWARD

PORT (REF)

BRAKE INBOARD

HYDRAULIC LINE (REF) LOWER AFT WING PLANK (REF) rsb601r32110 003.dg, kp, November 26, 2013

LOWER WING

SKIN (REF)

PRE-MOD Swivel Assembly - Bracket Installation Figure 1 (Sheet 2 of 4) Dec 19/2013 SB 601R-32-110 Page 12 of 16

Pages 13–20 of 20