Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2a63ddf05ec8161a4d33529c1a62796ecfa54b8c693215150861bc479b6d19c8' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2a63ddf05ec8161a4d33529c1a62796ecfa54b8c693215150861bc479b6d19c8' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
SB 670BA−57−024 Page 1 of 20 July 23/2014
SERVICE BULLETIN Technical Publications THIS SERVICE BULLETIN IS SENT TO EACH OPERATOR. IF THE OPERATOR HAS LEASED AIRCRAFT ,
TRANSFERRED SPARES IN THE LAST SIX MONTHS, SEND THIS SERVICE BULLETIN TO THE NEW
OWNER, UNLESS CONFIRMATION WAS RECEIVED THAT BOMBARDIER HAS INCLUDED THE NEW OPERATOR ON THE DISTRIBUTION LIST .
SEND THIS SERVICE BULLETIN TO THE LESSEE. IF THE OPERATOR HAS SOLD AIRCRAFT OR ATA SYSTEM: 57−12 NUMBER: 670BA−57−024 SUBJECT: Wings − Center Wing Secondary Structure − Inspection/Installation of the Insulation Blankets in the Upper Wing Box Area
1. PLANNING INFORMATION A. Effectivity
(1) Aircraft Affected:
AIRCRAFT MODEL SERVICE AIRCRAFT SERIALNUMBERS PRODUCTIONAIRCRAFTSERIAL NUMBERS CL−600−2C10 10004, 10028−10029, 10033, 10039, 10048, 10054, 10077, 10082, 10108, 10112, 10118, 10120, 10138, 10164, 10183, 10185, 10187, 10204, 10206, 10217, 10247, 10258, 10267−10268, 10270−10271, 10274−10275, 10279, 10289, 10303, 10327 None
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 2 of 20 July 23/2014
AIRCRAFT MODEL
PRODUCTION
AIRCRAFT
SERIAL NUMBERS
SERVICE AIRCRAFT SERIAL
NUMBERS CL−600−2D15 and CL−600−2D24 15001, 15014, 15018−15026, 15028−15029, 15031, 15034, 15036−15059, 15063, 15065−15066, 15068, 15071, 15074, 15076−15077, 15079, 15087, 15090, 15092, 15102−15104, 15106, 15110−15115, 15117−15124, 15126−15127, 15130−15131, 15134−15145, 15148−15152, 15154−15156, 15160, 15163, 15165, 15167, 15169, 15172, 15174−15175, 15177, 15179−15180, 15183−15185, 15188−15194, 15196, 15198−15199, 15201−15202, 15204, 15209−15210, 15213−15214, 15216, 15220, 15229−15230, 15232, 15236, 15238, 15241, 15243, 15245, 15247−15249, 15251−15279 None NOTE: The instructions in this service bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier service bulletins. Before you do this service bulletin, examine all Supplemental Type Certificates (STCs) and Supplemental Type Approvals (STAs) or equivalent action changes to make sure you can complete this service bulletin.
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 3 of 20 July 23/2014 B. Reason
(1) Condition It is possible that the insulation blankets are not installed in the upper wing box area, and if a bleed air leak is not sensed by the bleed leak detection system and hot air goes in the direction of the adjacent structure and/or the system components, an unwanted effect on the structural and the system components can occur.
(2) Evidence Some operators reported that they removed the insulation blankets from the upper wing box area during the incorporation of the initial issue or Revision A of Service Bulletin 670BA−36−016. Service Bulletin 670BA−36−016 gives the procedure to add protective shields above the insulation blankets.
(3) Objective/Benefit This service bulletin gives the procedure to do an inspection of the insulation blanket installation in the upper wing box area .This will make sure that the adjacent structure and/or the system components are fully protected.
C. Description This service bulletin is divided into two parts: PART A and PART B.
PART A − Inspection of the Insulation Blankets in the Upper Wing Box Area Circuit breakers are opened. The wheel bins are removed. If necessary, the overwing fairings between FS697.00−FS735.00 are removed. An inspection is done to find if some insulation blankets are installed in the upper wing box area. If one or more insulation blanket(s) is/are missing, PART B of this service bulletin is done. If removed, the left and the right overwing fairings between FS697.00−FS735.00 are installed. The wheel bins are installed. The circuit breakers are closed.
PART B − Installation of the Insulation Blankets in the Upper Wing Box Area Circuit breakers are opened. The wheel bins and the overwing fairings are removed. If necessary, the left and the right wing anti-ice ducts are removed. An inspection is done to find if all the insulation blankets are installed in the upper wing box area. An approved disposition is requested from Bombardier. If removed, the left and the right wing anti-ice ducts are installed. The overwing fairings and the wheel bins are installed. Circuit breakers are closed.
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 4 of 20 July 23/2014 D. Compliance Bombardier recommends that PART A of this service bulletin be done at no more than 800 flight hours from the release date on this service bulletin, unless otherwise directed by the airworthiness authority of the operator.
During the inspection done in PART A, if one or more insulation blanket(s) is/are missing, Bombardier recommends that PART B of this service bulletin be done at no more than 1200 flight hours from the release date on this service bulletin, unless otherwise directed by the airworthiness authority of the operator.
NOTE: Initial Issue or Revision A of Service Bulletin 670BA−36−016, Pneumatic − Bleed-Air Leak Detection and Warning System − Installation of Protective Blankets and New Sensing Elements in the Main Landing Gear and Overwing Areas, is a prerequisite to this service bulletin.
NOTE: It is not necessary to do this service bulletin if Revision B or a later revision of Service Bulletin 670BA−36−016, Pneumatic − Bleed-Air Leak Detection and Warning System − Installation of Protective Blankets and New Sensing Elements in the Main Landing Gear and Overwing Areas, is done.
NOTE: If it is not possible to complete all the instructions in this service bulletin because of the configuration of the aircraft, speak with a representative of Bombardier Customer Response Centre at phone number 514−855−8500 or send an e−mail at thd.crj@bombardier.com for analysis and to get an approved disposition to complete this service bulletin.
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage Tolerance Inspections (DTIs).
E. Approval The technical content of this service bulletin has been approved under the authority of the TCCA Design Approval Organization No: DAO #93−Q−02.
F . Manpower The man-hours given below are estimates for direct labor done by an experienced crew on an aircraft prepared for maintenance.
These estimates do not include the time necessary for:
−Administrative functions such as planning, liaising, familiarization, and report writing.
−Non-productive elapsed time such as rest time, having meals, and crew shift changes.
−Elapsed time such as for paint to dry, sealant to cure, and fuel tank venting.
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 5 of 20 July 23/2014 −Preparation for modification (unless specified in the Accomplishment Instructions) such as cleaning and getting parts, tools, consumables, and ground equipment.
−Quality assurance inspections, troubleshooting and/or correction of discrepancies found when a task is done.
−All other activities that are not considered by Bombardier as directly related to the accomplishment of this procedure.
NOTE: For on-site labor assistance, please speak with a Fleet Services representative for a quote. Contact the Fleet Services Team through the CRC at 514-855-8500 or e-mail at thd.crj@aero.bombardier.com.
FOR PART A It will take an estimated 3.50 man-hours to complete PART A of this service bulletin.
The man-hours are divided in the table that follows (elapsed cure time is not included in the man-hour summary given above):
TASK MAN-HOURS
(1) Job Set-Up 1.00
(2) Procedure 1.50
(3) Test N/A
(4) Job Close-Out 1.00
FOR PART B There are no man-hour estimates provided for PART B of this service bulletin.
G. Material − Price and Availability
(1) There are no kits for this service bulletin. Some parts can be necessary to accomplish the disposition supplied by Bombardier in PART B of this service bulletin and are available from Bombardier.
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 6 of 20 July 23/2014
(2) Please send a purchase order to the address below to schedule part delivery:
Bombardier Service Bulletin Kit Support Team 123 Garratt Blvd, N42−24 Toronto, Ontario Canada M3K 1Y5 Fax: 416-375-3060 Phone: 416-375-3920 e-mail: sbkits@aero.bombardier.com Please contact the Service Bulletin Kit Support Team at the address above for terms and conditions.
(3) Refer to paragraph 3.B. for a list of consumables for this service bulletin.
H. Tooling − Price and Availability There are no tool kits for this service bulletin. Refer to paragraph 3.C. for a list of special tools and equipment for this service bulletin.
I. Weight and Balance Not changed.
J. Electrical Load Data Not changed.
K. References Refer to the SB Introduction document for definition or explanation of service bulletin content.
Restriction and/or Special Instruction (RSI) C−57−1619−00, Revision D Aircraft Maintenance Manual (AMM) For Bombardier reference only: PCA 75848 L. Other Publications Affected None.
M. Relationship Chart Not applicable.
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 7 of 20 July 23/2014
2. ACCOMPLISHMENT INSTRUCTIONS PART A − Inspection of the Insulation Blankets in the Upper Wing Box Area Reference Information
REFERENCE DESIGNATION AMM 12−00−00−867−801 Standard Aircraft Configuration for Maintenance AMM 53−82−82−000−801 Removal of the Overwing Fairing, FS697 − FS735 (171AL/172AR) AMM 53−82−82−400−801 Installation of the Overwing Fairing, FS697 − FS735 (171AL/172AR) AMM 53−83−89−000−801 Removal of the Main Landing Gear (MLG) Wheel Bin AMM 53−83−89−400−801 Installation of the Main Landing Gear (MLG) Wheel Bin A. Job Set-Up
(1) Make sure that the aircraft is in standard configuration for maintenance (refer to AMM 12−00−00−867−801).
(2) Remove the left and the right MLG wheel bins (refer to AMM 53−83−89−000−801).
B. Procedure Refer to Figure 1 and Figure 2.
(1) Do an inspection of the upper wing box area to find if the insulation blankets are installed as follows:
NOTE: Two layers of protection are installed. The insulation blanket is the bottom layer and the protective shield is the top layer.
NOTE: Insulation blankets are silicone foam and fiberglass with a thickness of
0.25 in. (6.35 mm). Insulation blankets are white when they are new.
NOTE: Protective shields are fiberglass with a thickness of 0.13 in. (3.30 mm).
Protective shields are grey when they are new.
NOTE: It is permitted to carefully lift the protective shield if the edge of the insulation blanket is not visible.
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 8 of 20 July 23/2014
(a) Do an inspection to find if insulation blankets are installed between LBL45.00 and RBL45.00 at FS794.50.
(b) Do an inspection to find if an insulation blanket is installed on the fuel vent tube at BL0.00 near FS794.50.
NOTE: On the middle section of the fuel vent tube, there is a space between the left protective shield and the right protective shield.
(c) Do an inspection to find if an insulation blanket is installed between FS697.00 and FS735.00, near LBL30.00 or LBL45.00.
NOTE: If you cannot see an insulation blanket or you cannot get access to the inspection area, the overwing fairing, FS697.00 − FS735.00 panel 171AL can be removed (refer to AMM 53−82−82−000−801).
(d) Do an inspection to find if an insulation blanket is installed between FS697.00 and FS735.00, near RBL30.00 or RBL45.00.
NOTE: If you cannot see an insulation blanket or you cannot get access to the inspection area, the overwing fairing, FS697.00 − FS735.00 panel 172AR can be removed (refer to AMM 53−82−82−000−801).
(2) If one or more insulation blanket(s) is/are missing, do PART B of this service bulletin.
(3) For protective shields that were lifted, make sure they are lowered.
(4) If it is not possible to complete all the instructions in this service bulletin because of the configuration of the aircraft, speak with a representative of Bombardier Customer Response Centre at phone number 514−855−8500 or send an e−mail at thd.crj@bombardier.com for analysis and to get an approved disposition to complete this service bulletin.
C. Job Close-Out
(1) Remove all tools, equipment, and unwanted materials from the work area.
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 9 of 20 July 23/2014
(2) If removed, install the access panels that follow:
PANEL NAME REFERENCE 171AL/ 172AR Overwing Fairing, FS697 − FS735 AMM 53−82−82−400−801
(3) Install the left and the right MLG wheel bins (refer to AMM 53−83−89−400−801).
(4) When PART A of this service bulletin is completed, make this entry in the applicable logbooks: /quoteblleftService Bulletin 670BA−57−024, Wings − Center Wing Secondary Structure − Inspection/Installation of the Insulation Blankets in the Upper Wing Box Area, PART A, incorporated."
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 10 of 20 July 23/2014 PART B − Installation of the Insulation Blankets in the Upper Wing Box Area Reference Information
REFERENCE DESIGNATION AMM 12−00−00−867−801 Standard Aircraft Configuration for Maintenance AMM 30−11−06−000−801 Removal of the Supply Duct AMM 30−11−06−400−801 Installation of the Supply Duct AMM 53−82−82−000−801 Removal of the Overwing Fairing, FS697 − FS735 (171AL/172AR) AMM 53−82−82−400−801 Installation of the Overwing Fairing, FS697 − FS735 (171AL/172AR) AMM 53−82−82−000−802 Removal of the Overwing Fairing, FS735 − FS768 (171BL/172BR) AMM 53−82−82−400−802 Installation of the Overwing Fairing, FS735 − FS768 (171BL/172BR) AMM 53−82−82−000−803 Removal of the Overwing Fairing, FS768 − FS801 (171CL/172CR) AMM 53−82−82−400−803 Installation of the Overwing Fairing, FS768 − FS801 (171CL/172CR) AMM 53−83−89−000−801 Removal of the Main Landing Gear (MLG) Wheel Bin AMM 53−83−89−400−801 Installation of the Main Landing Gear (MLG) Wheel Bin D. Job Set-Up
(1) Make sure that the aircraft is in standard configuration for maintenance (refer to AMM 12−00−00−867−801).
(2) Open, safety, and tag the circuit breakers that follow:
CB PANEL CB NO. NAME CBP−1 D7 A/ICE CONT CH A CBP−1 K6 ACS CONT 2 CH A CBP−1 L1 ACS CONT 1 CH A
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 11 of 20 July 23/2014 CB PANEL NAMECB NO.
CBP−2 J4 ACS CONT 1 CH B CBP−2 K6 ACS R MAN CBP−2 LOWER T1 A/ICE CONT CH B CBP−2 LOWER T7 ACS CONT 2 CH B CBP−2 LOWER T8 ACS L MAN CBP−2 N9 MLG BAY OVHT DET CBP−5 A3 APU BATT CONT
(3) Remove the access panels that follow:
PANEL NAME REFERENCE 171AL/ 172AR Overwing Fairing, FS697 − FS735 AMM 53−82−82−000−801 171BL/ 172BR Overwing Fairing, FS735 − FS768 AMM 53−82−82−000−802 171CL/ 172CR Overwing Fairing, FS768 − FS801 AMM 53−82−82−000−803
(4) Remove the left and the right MLG wheel bins (refer to AMM 53−83−89−000−801).
(5) If necessary, remove the applicable left and the applicable right supply duct(s) (refer to AMM 30−11−06−000−801).
SERVICE BULLETIN 670BA−57−024 SB 670BA−57−024 Page 12 of 20 July 23/2014 E. Procedure For aircraft 10004, 10028−10029, 10033, 10039, 10048, 10054, 10077, 10082, 10108, 10112, 10118, 10120, 10138, 10164, 10183, 10185, 10187, 10204, 10206, 10217, 10247, 10258, 10267−10268, 10270−10271, 10274−10275, 10279, 10289, 10303, 10327 Refer to Figure 2 and Figure 3.
(1) Do an inspection of the upper wing box area to find if all the insulation blankets are installed.
NOTE: Two layers of protection are installed. The insulation blanket is the bottom layer and the protective shield is the top layer.
NOTE: Insulation blankets are silicone foam and fiberglass with a thickness of
0.25 in. (6.35 mm). Insulation blankets are white when they are new.
NOTE: Protective shields are fiberglass with a thickness of 0.13 in. (3.30 mm).
Protective shields are grey when they are new.
NOTE: It is permitted to carefully lift the protective shield if the edge of the insulation blanket is not visible.
NOTE: It is permitted to open the Velcro of the protective shield if the edge of the insulation blanket is not visible.
(2) Speak with a representative of Bombardier Customer Response Centre at phone number 514−855−8500 or send an e−mail at thd.crj@bombardier.com for analysis and to get an approved disposition to complete this service bulletin.
For aircraft 15001, 15014, 15018−15026, 15028−15029, 15031, 15034, 15036−15059, 15063, 15065−15066, 15068, 15071, 15074, 15076−15077, 15079, 15087, 15090, 15092, 15102−15104, 15106, 15110−15115, 15117−15124, 15126−15127, 15130−15131, 15134−15145, 15148−15152, 15154−15156, 15160, 15163, 15165, 15167, 15169, 15172, 15174−15175, 15177, 15179−15180, 15183−15185, 15188−15194, 15196, 15198−15199, 15201−15202, 15204, 15209−15210, 15213−15214, 15216, 15220, 15229−15230, 15232, 15236, 15238, 15241, 15243, 15245, 15247−15249, 15251−15279 Refer to Figure 2 and Figure 4.
(3) Do an inspection of the upper wing box area to find if all the insulation blankets are installed.
NOTE: Two layers of protection are installed. The insulation blanket is the bottom layer and the protective shield is the top layer.