TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'bcbc5d845c33378b8b0226a53bcadf152cdfb2dee3d3353dc324d08bbcfb8d8c' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'bcbc5d845c33378b8b0226a53bcadf152cdfb2dee3d3353dc324d08bbcfb8d8c' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
A601-0627Page 1 of 1
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET MODEL CL-600-2A12 & CL-600-2B16 Discard the Revision 01 of this Service Bulletin dated Feb 26/2013, and replace in its entirety with this Revision 02.
Service Bulletin No. A601-0627 Date of Basic Issue Sep 26/2013 Revision No. 01 Dated Feb 26/2014 Revision No. 02 Dated Dec 09/2014 For action applicable to aircraft on which the Basic Issue or Revision 01 of this Service Bulletin was done, refer to the retroactive action box on Page 1 of this Service Bulletin.
This revision has no effect for aircraft on which PART B or PART C of this Service Bulletin was done thus no other action is necessary. Do not sign the log book if you have not done this revision. Keep the previous log book entry.
You may make an entry as “Not Applicable” for this revision.
This revision is issued to:
1. Change the Service Bulletin Summary Sheet and Paragraph 1.D., Compliance Time, to reflect the Restriction and/or Special Instruction (RSI), C-4095, Rev. D.
2. Add in the Service Bulletin Summary Sheet, in the Planning Information note and in Paragraph 1.D., Compliance, a note for the Airworthiness Directive
3. Add a retroactive action box.
4. Change, in Paragraph 1.K., the revision of the Restriction and/or Special Instruction (RSI), C-4095, to Rev. D.
5. Make miscellaneous minor changes, as necessary, with no change of context.
Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 1 of 1 ALERT SERVICE BULLETIN SUMMARYThis Service Bulletin is available at:
www.cic.bombardier.com MODEL CL-600-2A12 & CL-600-2B16 ATA 57-40 WINGS SPECIAL CHECK/MODIFICATION – ATTACHMENT FITTINGS –
INBOARD FLAP HINGE BOX FORWARD ATTACHMENT FITTINGS FASTENERS The information below is provided for your reference. For full details, please see corresponding paragraph contained within this bulletin.
ALERTSPECIFIED TIME COMPLIANCE
COMPLIANCE TIME PART A is recommended within 100 landings from this Alert Service Bulletin release date (Basic Issue) or within 50 landings from this Alert Service Bulletin release date (Revision 02) and must be repeated every 10 landings until modification in PART B is complied with or PART C is completed.
PART B is recommended no later than 24 months from this Alert Service Bulletin release date (Revision 02).
EFFECTIVITY: A/C Serial No. 3001 to 3066 A/C Serial No. 5001 to 5194 MANPOWER: 1 man-hour for the special check in PART A 58 man-hours for the modification in PART B
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN YES NO TLMC, CH 5 AFFECTED YES NO KITS and/or PARTS YES NO
TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO PREREQUISITE SERVICE BULLETINS: N/A NOTES 1. Defueling and venting of the fuel tanks must be done to do PART B of this Service Bulletin.
2. To minimize aircraft downtime and cost, it is recommended to do Service Bulletin 601-0631, in conjunction with PART B of this Service Bulletin.
3. This Service Bulletin is mandated by Airworthiness Directive (AD) CF-2013-39R1.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services at:
514-855-2999 or 1-866-538-1247
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
© 2013 - 2014 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 1 of 19
ALERT SERVICE BULLETINThis Alert Service Bulletin is available at:
www.cic.bombardier.com MODEL CL-600-2A12 & CL-600-2B16 ATA 57-40 WINGS SPECIAL CHECK/MODIFICATION – ATTACHMENT FITTINGS –
INBOARD FLAP HINGE BOX FORWARD ATTACHMENT FITTINGS FASTENERS
RETROACTIVE ACTION
1. RETROACTIVE ACTION APPLICABLE TO AIRCRAFT THAT HAVE INCORPORATED THE BASIC ISSUE OR REVISION 01 OF PART A OF THIS SERVICE BULLETIN:
A. FOR THE AIRCRAFT WITH THE INCORRECTLY ORIENTED FORWARD FASTENERS HEADS (FIGURE 2 in PART A), PART A MUST BE DONE WITHIN 10 LANDINGS FROM THIS ALERT SERVICE BULLETIN RELEASE DATE (REVISION 02) AND MUST BE REPEATED EVERY 10 LANDINGS UNTIL PART B IS COMPLIED WITH.
– NO FURTHER ACTION IS REQUIRED, ONCE PART B IS INCORPORATED.
OR B. FOR THE AIRCRAFT WITH THE CORRECTLY ORIENTED FORWARD FASTENERS HEADS (FIGURE 1 in PART A).
– NO FURTHER ACTION IS REQUIRED, ONCE PART C IS COMPLETED.
2. NO RETROACTIVE ACTION IS REQUIRED FOR AIRCRAFT THAT HAVE INCORPORATED PART B OR PART C OF THE BASIC ISSUE OR REVISION 01 OF THIS SERVICE BULLETIN.
MODEL CL-600-2A12 & CL-600-2B16 Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 2 of 19
2. PLANNING INFORMATION NOTES: 1. To minimize aircraft downtime and cost, it is recommended to do Service Bulletin 601-0631, in conjunction with PART B of this Service Bulletin.
2. This Service Bulletin is mandated by Airworthiness Directive (AD) CF-2013-39R1.
A. Effectivity CL-600-2A12 aircraft, Serial No. 3001 to 3066.
CL-600-2B16 aircraft, Serial No. 5001 to 5194.
NOTE: The instructions given in this Alert Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aerospace Alert Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure that this bulletin can be completed.
B. Reason On a Challenger 605 zonal inspection, one of the two forward fasteners attaching the inboard flap hinge box forward hinge fitting at Wing Station (WS)
76.50 was found with its head missing.
The investigation shows that when installed with their head outside, those fasteners will experience premature failure caused by higher pre-load due to clamping and alignment.
This Alert Service Bulletin provides instructions to inspect and repair the forward fasteners attaching the forward fittings at WS 76.50 and WS 127.25 at both wings.
C. Description This Alert Service Bulletin gives instructions in:
PART A, to:
– Do the inspection of the forward inboard flap fasteners on the hinge box wing forward fitting.
PART B, to:
– Remove the forward and aft inboard flap hinge-fairings, – Remove the applicable upper and lower access panels, – Do the inboard flap fasteners modifications as per APPENDIX 1 on the hinge box wing forward fittings, – Install the removed wing upper and lower access panels, and – Re-install the forward and aft inboard flap hinge-fairings.
MODEL CL-600-2A12 & CL-600-2B16 Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 3 of 19 In PART C, to:
– Confirm that the forward fasteners heads are correctly oriented.
In Testing, to:
– Do the necessary testing to ensure that the inboard flaps operate correctly.
D. Compliance PART A is recommended within 100 landings from this Alert Service Bulletin release date (Basic Issue) or within 50 landings from this Alert Service Bulletin release date (Revision 02) and must be repeated every 10 landings until modification in PART B is complied with or until PART C is completed to confirm that the forward fasteners heads are correctly oriented.
PART B is recommended no later than 24 months from this Alert Service Bulletin release date (Revision 02).
NOTES: 1. At any time, if any of the forward fasteners heads are found missing, PART B must be implemented before further flight.
2. If the modification in PART B is incorporated or if the forward fasteners heads are correctly oriented as per PART C, no further action is required.
3. This Service Bulletin is mandated by Airworthiness Directive (AD) CF-2013-39R1.
E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93-Q-02.
NOTES: 1. The technical content of this Alert Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA in accordance with established procedures.
MODEL CL-600-2A12 & CL-600-2B16 Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 4 of 19 F. Manpower NOTES: 1. The man-hours given are estimates to help you schedule the tasks given in this bulletin. The estimates are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.
For more information related to the manpower estimates, refer to SB 601-0002.
2. This Alert Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the labor estimates and should be considered for planning purposes before you schedule this Alert Service Bulletin.
1 man-hour is necessary to do the special check in PART A.
58 man-hours are necessary to do this modification in PART B.
Bombardier does not pay for the special check in PART A and the Fuel Disposal fee at any time.
The labor required to do the modification in PART B is at no cost if:
(i) the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and
(ii) this Service Bulletin is scheduled in less than 48 months from its release date (Basic Issue).
G. Material - Cost and Availability No kits or parts are necessary to do the special check in PART A or to confirm that the forward fasteners heads are correctly oriented as per PART C.
When applicable, submit an SRPSA to Customer Support Engineering (CSE) to obtain the kit and part details necessary to do PART B of this modification.
If applicable, the kit for PART B is available at no cost if a no-charge purchase order is sent to Bombardier Aerospace in less than 48 months from this Service Bulletin release date (Basic Issue).
Bombardier does not pay for the bushings that may be necessary, to do PART B, of this Service Bulletin.
Bombardier does not pay for the Fuel Disposal fee at any time.
During or after the above free period, Smart Parts Plus does not pay for the kit.
MODEL CL-600-2A12 & CL-600-2B16 Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 5 of 19 H. Tooling The tools that follow, or equivalent, are necessary to do PART A of this Alert Service Bulletin:
GSE REFERENCE NO. PART NO. DESCRIPTION 24-00-24 S4933959−501 Tag, Circuit Breaker Commercially Available - Borescope The tools that follow, or equivalent, are necessary to do PART B of this Alert Service Bulletin:
GSE REFERENCE NO. PART NO. DESCRIPTION 24-00-24 S4933959−501 Tag, Circuit Breaker 28-00-06 8320000 Fuel Fumes Detector Commercially Available - Torque Wrench 20 to 25 lbfin (2.26 to 2.82 Nm) Commercially Available - Torque Wrench 30 to 35 lbfin (3.39 to 3.95 Nm) The tools listed below or commercially available equivalent tools are required for the removal of the bushings.
REFERENCE NO. PART NO. DESCRIPTION Commercially Available - C-Clamp See Note 3 - Support Block NOTES: 1. Refer to the Illustrated Tool and Equipment Manual (ITEM), PSP611 to make sure that you use the correct equipment configuration.
2. Refer to the Introduction of the publication listed in NOTE 1 for acceptable GSE equivalents.
3. For the support block manufacturing details, refer to Appendix 2.
I. Weight and Balance No change.
J. Electrical Load Data No change.
MODEL CL-600-2A12 & CL-600-2B16 Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 6 of 19 K. References – Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C-4095, Rev. D.
– CL-601 Maintenance Manual, PSP 601-2, Chapters 6, 12, 24, 28, and 57.
– CL-601 Illustrated Parts Catalog (IPC), PSP 601-4, Chapter 57.
– CL-601 Structural Repair Manual (SRM), PSP 607, Chapter 51.
– CL-601 Illustrated Tool and Equipment Manual (ITEM), PSP 611, Chapters 24 and 28.
– Bombardier Aerospace, Modification Summary IS600-57-0001, Rev. A.
– Bombardier Aerospace, Repair Engineering Order (REO), 600-57-26-001.
– Bombardier Aerospace, Kit Drawing K600-10110, Rev. --.
– Bombardier Aerospace, Appendix 1 (attached).
– Bombardier Aerospace, Appendix 2 (attached).
L. Other Publications Affected None M. Equivalent Service Bulletins – For the Challenger 605 aircraft, use SB A605-57-004.
– For the Challenger 604 aircraft, use SB A604-57-006.
– For the Challenger 600 aircraft, use SB A600-0763.
3. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. If no other manual references are given, the procedures that follow are from the Maintenance Manual, PSP601-2, unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the Maintenance Manual PSP601-2, Chapter 6.
A. Aircraft Setup
(1) Install the safety devices and the warning signs in the applicable positions and the warning placard on the flap control lever.
(2) Obey all electrical/electronic safety precautions. Refer to Chapter 24-00-00, ELECTRICAL POWER - Removal/Installation.
(3) Connect the external ac power. Refer to Chapter 12-00-00, SERVICING.
(4) Set the flap control lever to 45 and make sure that the flaps are fully extended.
(5) Remove the external ac power. Refer to Chapter 12-00-00, SERVICING.
MODEL CL-600-2A12 & CL-600-2B16 Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 7 of 19
(6) Open and tag the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE (A/C: 3001–3066) (A/C: 5001–5194) CBP-A 20 20 FLAP MOTOR 1 221 CBP-A 77 77 FLAP CONT 1 221 CBP-B 176 20 FLAP MOTOR 2 222 CBP-B 233 77 FLAP CONT 2 222 CBP-B 188 - BATT CHGR 222 B. PART A: Special Check − Inboard Flap Fasteners on the Hinge Box Wing Forward Fitting
(1) Do a detailed borescope inspection of the inboard flap fasteners of the hinge box wing forward fitting of both wings. Refer to the steps that follow, Figure 1 and Figure 2.
NOTE: If the fairing is already removed, a visual inspection can be carried out instead of a borescope inspection.
(a) Examine the orientation of the forward attachments of the inboard flap hinge boxes at WS 76.50 and WS 127.25. Refer to Figure 1 and Figure 2.
Figure 1
(i) If all of the forward fasteners heads of the inboard flap hinge boxes at WS 76.50 and WS 127.25 of both wings, are correctly oriented as per Figure 1, proceed to PART C in Paragraph 2.D.
MODEL CL-600-2A12 & CL-600-2B16 Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 8 of 19 Figure 2
(ii) If any of the forward fasteners heads are found missing as per Figure 2, proceed to PART B in Paragraph 2.C.
(iii) If any of the forward fasteners heads are incorrectly oriented as per Figure 2 but no fasteners heads are found missing, then the borescope inspection of the forward inboard flap fasteners, hinge box wing forward fitting, must be repeated every 100 landings, until the modification, provided in PART B of this SB is complied with.
As applicable, proceed to PART B or to the Close-out in Paragraph 2.F.
C. PART B: Modification − Incorrectly Oriented Inboard Flap Fasteners on the Hinge Box Wing Forward Fitting
(1) Remove fillet seal from perimeter around the forward and aft inboard flap hinge fairings making contact with the wing surface and the inboard flap respectively. Refer to SRM, Chapter 51-57-00, SEALING - Description.
(2) Remove the forward and aft inboard flap hinge-fairings that follow, to gain access to inboard flap hinge boxes. Refer to Chapter 6-53-00, REMOVABLE FAIRINGS - General:
ACCESS DESIGNATION 571-CB (671-CB) Fairing, Forward Inboard Flap Hinge 571-FB (671-FB) Fairing, Forward Inboard Flap Hinge 572-DB (672-DB) Fairing, Rear Inboard Flap Hinge 572-GB (672-GB) Fairing, Rear Inboard Flap Hinge
(3) Obey all the fuel system safety precautions. Refer to Chapter 28-10-11, FUEL TANKS - Maintenance Practices.
MODEL CL-600-2A12 & CL-600-2B16 Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 9 of 19
(4) Defuel the aircraft. Refer to Chapter 12-10-28, FUEL SYSTEM - Replenishing.
(5) Drain, purge and prepare the main left and right fuel tanks for access.
Refer to Chapter 28-10-11, FUEL TANKS – Maintenance Practices.
(6) Remove the access panels that follow. Refer to Chapter 6-51-00, ACCESS PANELS AND DOORS:
ACCESS DESIGNATION 571BB (671BB) Wing Lower Surface – Access Panel 571AB (671AB) Wing Lower Surface – Access Panel 540FB (640FB) Fuel Tank – Access Panels 540GB (640GB) Fuel Tank – Access Panels NOTE: You can use the Fuel Fumes Detector, Part No. 8320000, as an alternative to the explosiometer.
(7) Remove and isolate the electrical power from the aircraft. Refer to Chapter 24-00-00, ELECTRICAL POWER - Maintenance Practices.
(8) Put a DO NOT CONNECT − FUEL TANK MAINTENANCE placard on the battery.
(9) Put a DO NOT CONNECT − FUEL TANK MAINTENANCE placard on the ac and the dc ground power receptacles.
(10) Remove and replace each of the HI-LOK/Hi-LITE forward fasteners on the left and right wing at WS 76.50 and WS 127.25 as per Appendix 1, PART A, and Figure 3.
(11) If it is not possible to follow all instructions from Appendix 1, Part A or Part B (REO 600-57-26-001) due to the configuration of the aircraft structures, submit an SRPSA to Customer Support Engineering (CSE) for evaluation and to obtain an Approved Repair in order to allow completion of the Service Bulletin, by email at: SRPSA@aero.bombardier.com Figure 3
MODEL CL-600-2A12 & CL-600-2B16 Basic Issue: Sep 26/2013 A601-0627Revision 02: Dec 09/2014 Page 10 of 19
(12) For each wing, disconnect one flap hinge box at a time from the forward attachment fitting and aft attachment fitting. Refer to the steps that follow:
CAUTION: ONLY ONE FLAP HINGE BOX IS TO BE DISCONNECTED AT A TIME. THE FLAP HINGE BOX MUST BE SUPPORTED DURING
THE MODIFICATION SO AS NOT TO DAMAGE THE FLAPS AND ATTACHED COMPONENTS.
NOTES: 1. The flap will be supported by the other attached flap hinge box/arm and both actuators.
2. To reduce the load on the other attached flap hinge box/arm and actuators, the flaps should also be supported per best shop practice or with a bench and padding. Refer to Figure 4.
Figure 4
(a) Disconnect the inboard flap hinge box (1) at location WS 76.50 and WS 127.25 as follows: Refer to Figure 5 and Figure 6.
(i) If necessary, remove and keep the hardware that attach the bonding jumpers to the flap hinge box (1).
(ii) For the flap hinge box (1) located at WS 76.50 only, do as follows:
(aa) If necessary, disconnect the electrical connector wire from any attached location on the structure, to allow downward movement of the flap hinge box.
(bb) Remove and discard the cotter pin (4). Refer to Maintenance Manual (PSP 601-2), 20-80-00 Safetying Devices.
(cc) Remove and keep the nut (5), washer (6) and bolt (7) and disconnect the control rod (2) from the lever (8) of the flap position transmitter.
(dd) If necessary, put protective covers on the open ends of the electrical connector (3) and on the electrical connection of the position transmitter.