On this page
Text · 24
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2025-0482, the docket of AD 2025-19-05. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '79ac57a9f86e17ffe4c350d2c6fc515e783bc0e1b3de2f2d65fb33a3ac3a2691' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '79ac57a9f86e17ffe4c350d2c6fc515e783bc0e1b3de2f2d65fb33a3ac3a2691' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Page 1 of 2 GN Tx Ltr SB 84-55-15Revision ‘A’ 07 Jan 2025 DHC-8(DASH 8) SERVICE BULLETIN84-55-15 Stabilizers – Elevator – Retrofit Installation of Front Spa r Doublers – ModSum 4-114074 This page transmits Revision ‘A’ of Service Bulletin 84-55-15, pages 1 thru 20, dated 07 Jan 2025.
This service bulletin is re-issued in its entirety for the reasons that follow:
- The Effectivity section is revised to add a new note
- The Reason section section is revised to update the solution paragraph
- The Description section is revised to add a new step related to the inspection of the elevator front spar, upper and lower skin
- The References section is revised to convey the latest revision of this service bulletin and engineering documentation
- The Procedure section is revised to add the new step 3. B. (2).
The Compliance in the previous issue(s) of this service bulletin is not affected by this revision. No additional rework to the aircraft is introduced by this revision.
Remove the initial issue of Service Bulletin 84-55-15 and re place with attached.
Previous issue(s) of Service Bulletin 84-55-15:
Initial issue – Pages 1 thru 20 dated 30 Jan 2024
SERVICEBULLETIN 84-55-15 Page 2 of 2 GN Tx Ltr SB 84-55-15Revision ‘A’ 07 Jan 2025 This Page Intentionally Blank
GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page1of20
SERVICE BULLETIN ATASYSTEM: 5500 NUMBER: 84-55-15
DE HAVILLAND AIRCRAFT OF CANADA LIMITED (DHC) CONSIDERS
URGES OPERATORS TO PROMPTLY EVALUATE THE CONTENTS
THIS SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND SUBJECT: Stabilizers – Elevator – Retrofit Installation of Front Spar Doublers – ModSum 4-114074
1. PLANNING INFORMA TION A. Effectivity AircraftAffected:
In-Service: DHC-8 Aircraft Models 401 and 402 Serial Number s 4059 thru 4633.
Related ModSum Title 4-114001 Stabilizers–Elevator–IntroductionofFrontSpar Doublers NOTE1: Aircraft 4001-4058 are in the pre-ModSum 4-153256 configuration which has elevator assemblies 85527021-001/002/003/004 installed with the elevator front spar that has adequate reinforcement and do not require the web reinforcement to be installed per this service bulletin.
NOTE2: The instructions in this service bulletin are only applicable to the systems and parts installed at the time of delivery on the aircraft or as changed by DHC Service Bulletin(s). Before you do this bulletin, examine all STC or equivalent action changes to make sure this bulletincanbecompleted.
SERVICE BULLETIN 84-55-15 GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page2of20 SparesAffected:
The following is a list of spares affected by this change. Review spares and procurement systems to determine the existence of any listed parts. See Paragraph 2.D.,ExistingPartsAccountability,fordispos ition.
Part Number Description 85527021-005 85527021-006 ElevatorStructureAssembly(LH) ElevatorStructureAssembly(RH) B. Reason Problem: Elevatorfrontsparcrackinghasbeenreportedonf ourDHC-8-400aircraft.
Labexaminationdeterminedthecracks,emanatingfrommult ipleorigins, were the result of fatigue. Investigations identified two locations on the front spar web that may experience high stress levels due to potential PowerControlUnit(PCU)forcefight.
Solution: Thisservicebulletinalsoconductsinspectiono ftheelevatorleadingedge frontsparintheareasadjacenttoPCUfittingsandtheTechn icalHelpDesk isinformedifdamageisfound.Ifnodamagewasfound,theser vicebulletin installs doubler 85520121-107 between the ribs 12 and 13 andinstalls doubler85520121-105betweentheribs13and14atthefronts parofthe elevator structure assembly to enhance fatigue strength ofthe elevator frontsparforthePostModSum4-153256aircraft.Theexisti nglowermid skinpanels(85527112)areremovedandre-installedwithne wblindrivets.
C. Description Theproceduresinthisservicebulletingivetheinstructio nstodothetasksthatfollow:
- Aircraftelectricalpowerisremoved
- Thenoselandinggearlockisengaged
- Themainlandinggearlockpinsareinstalledthrougheachm aingearandmaingear doormechanism
- Gainedaccesstohorizontalstabilizer
- TheLHandRHelevatorstructureassembliesareremovedfro mtheaircraft
- Inspectionoftheelevatorfrontspar,upperandlowerskin sisconducted.Ifdamage isfound,reportedtotheTHD
- Skinpanelsareremoved
- BHECinspectionofthefastenerholesisdone
SERVICE BULLETIN 84-55-15 GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page3of20
- Thepressuresensitivetapesareremovedfromtheaffected lighteningholes
- BHECinspectionisdoneonthefrontspar
- Thefrontsparwebissolventcleaned
- Theholesaredrilledonthefrontspar
- HFECinspectionisdoneatthebendradiusoftheribslighte ninghole
- Sealanttothefayingsurfacesofthecomponentsareapplie d
- Thedoublersareinstalledbetweentherespectiveribsusi ngthesolidrivets
- The reworked area on the exterior faces of the elevator front spar are treated with corrosionpreventivecompound
- Thepressuresensitivetapesandadhesivetapesareapplie d
- TheLHareRHelevatorstructureassembliesarere-identif ied
- Skinpanelsareinstalled
- TheLHandRHelevatorstructureassembliesareinstalledt otheaircraft
- Closeout.
D. Compliance DeHavillandAircraftofCanadaLimitedhighlyrecommendsi ncorporationofModSum 4-114074 at the earliest opportunity unless otherwise directed by the operator’s airworthinessauthority.
ATransportCanadaAirworthinessDirectivePending.
E. Approval Thetechnicalcontentofthisservicebulletinhasbeenappr ovedundertheauthorityof the Transport Canada Civil Aviation (TCCA) Design ApprovalOrganization No: DAO #19-Q-01.
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage ToleranceInspections(DTIs).
SERVICE BULLETIN 84-55-15 GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page4of20 F. Manpower It will take an estimated 24.00 man-hours to complete this service bulletin. The breakdownoftheman-hoursisshowninthetablethatfollows :
TASK MAN-HOURS JobSet-Up 1.00 Procedure 22.00 Test/RTS 0.00 Close-Out 1.00 This estimate is for direct labour done by an experienced crew and it does not include, planning, familiarization, cure time, part fabrication, tool acquisition or lost time.
G. Material – Price and Availability TheModificationKitrequiredtodothisservicebulletinis listedinthetablebelow.
Kit Number Description 8MK5023-001 Kit–DoublerInstallation,Elevator Operators should submit a purchase order through the Customer Response Center (CRC) to the Customer Accounts Service Team (CAST) at DHC specifying aircraft serialnumber(s).Submitthepurchaseorderto:
DeHavillandAircraftofCanadaLimited MaterialServices 5800ExplorerDrive Mississauga Ontario CanadaL4W5K9 DHCPhoneNumbers :
NorthAmerica:TollFree: 1-855-310-1013or Direct: 1-647-277-5820 DHC Emails:
Parts: Europe,MiddleEast,Africa,andRussia: emear.parts@deha villand.com AmericasandRestofWorld: parts@dehavilland.com
SERVICE BULLETIN 84-55-15 GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page5of20 H. Tooling – Price and Availability None I. Weight and Balance A/C Type and Model Weight (Lb) Arm (Inches) Moment (Inches x Lb) x 0.001 DHC-8Model401 Kit–8MK5023-001 +0.27 1066.45 0.29 DHC-8Model402 Kit–8MK5023-001 +0.27 1066.45 0.29 J. Electrical Load Data Notaffected K. Publications Affected AircraftIllustratedPartsCatalog PSM 1-84-4.....................
ModSumsManual PSM 1-84-12 .................................
WeightandBalanceManual(Imperial) PSM 1-84-8...............
WeightandBalanceManual(Metric) PSM 1-84-8M .................
L. References Revision ‘A’ of this service bulletin was prepared to the engineering drawings and relateddatathatfollows:
DRAWING SHEET REV 8MK5023 1 A 8Z10511 1 C 8Z10511 2 A 85520121 1 A ModSum4Q114074Rev.‘D’ ModSum4-114074Rev.‘D’ PCA47136Revision0(forinternalreferenceonly).
SERVICE BULLETIN 84-55-15 GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page6of20
2. MATERIAL INFORMA TION A. Parts Required Per Aircraft
(1) ModificationKit8MK5023-001
(2) DetailedKitContent:
Quantity Per Kit -001 Part Number Description Remarks 8 B0205016AD3-5S SolidRivet SeeNotebelow 102 B0205016AD3-4S SolidRivet SeeNotebelow 12 NAS9305E-4-04 BlindRivet SeeNotebelow 108 NAS9305E-4-03 BlindRivet SeeNotebelow 22 NAS9305E-4-02 BlindRivet SeeNotebelow 36 NAS9303E-5-05 BlindRivet SeeNotebelow 48 NAS9303E-5-04 BlindRivet SeeNotebelow 120 NAS9303E-5-03 BlindRivet SeeNotebelow 76 NAS9303E-5-02 BlindRivet SeeNotebelow 20 NAS9304E-4-03 BlindRivet SeeNotebelow 126 NAS9304E-4-02 BlindRivet SeeNotebelow 72 B0205016AD4-6S SolidRivet SeeNotebelow 2 85520121-107 Doubler 2 85520121-105 Doubler REF 8Z10511 Retrofit–Doubler Installation Dwgonly NOTE: These parts are not included in the kit and must be supplied bythe operator,orobtainedthroughDeHavillandspares.
Listed drawings that are required to complete the kits abovecan be requested by writingtothefollowingemailaddress:
dwg.request@dehavilland.com
SERVICE BULLETIN 84-55-15 GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page7of20
(3) Inadditiontotheabovepart(s),thefollowingmaterial (s)arerequired forthecompletionofthisservicebulletinandmaybeprocur edassingleitems fromDHCorpurchaseddirectlyfromindustrysources.
Each consumable product listed in the table below is given its own unique Product ID Number. The number is used to identify a particular recommended product, the specifications and the trade names any of whichcan be used unlessspecifiedotherwise(refertoPSM1-84-18Consumabl eProductsManual).
Consumable Product ID Number Quantity Per Kit -001 Description Remarks 07-01C A/R Compound,F13,CorrosionInhibitingCoating– CorrosionPreventive, Clear,SoftFilm MIL-PRF-16173E 14-173 A/R Tape,Pressure–Sensitive,InsulationCover Splicing DSC91-21 B. Parts Required to Modify Spares None C. Special Tools and Equipment Required None
SERVICE BULLETIN 84-55-15 GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page8of20 D. Existing Parts Accountability The following parts may be affected by this service bulletin. Indented parts are components of thenexthigherassembly. Thequantity(Qty.) columnlists thequantity that may be affected per aircraft for non-indented parts andthe quantity per next higherassemblyforindentedparts.
Existing Part Number Description Qty. IC DC New Part Number PNC 85527021-005 ElevatorStructure Assembly(LH) 1 C RWI 8Z10511-001 R 85527021-006 ElevatorStructure Assembly(RH) 1 C RWI 8Z10511-002 R IC Interchangeability Code A Notinterchangeable.
B RemovedPart.Nodirectreplacement.
C Conditionally Interchangeable. Installation of superse ded part negates the intentofthisservicebulletin.
DC Disposition DIS DiscardPart.
MUI MultipleUsageItem:Returntostockifserviceable.
RWK Reworkexistingpartinaccordancewiththisservicebul letin.
RWI Reworkexistingpartperdrawing.
SAL Salvage.Returntooperator’sstoresforsalvageconsid eration.
PNC Part Number Code N No equivalent DHC part number for reworked part. Indicate o n part that thisservicebulletinhasbeenaccomplished.
R Partnumberafterrework.
S Supersedingorequivalentpartnumber.
X Reworked part and superseding part are functionally and ph ysically equivalentbutnotidentical.
SERVICE BULLETIN 84-55-15 GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page9of20
3. ACCOMPLISHMENT INSTRUCTIONS A. Job Set-Up WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE MAIN LANDING GEAR. MAKE SURE YOU ENGAGE THE NOSE GEAR LOCK. IF YOU
DO NOT DO THIS, THE LANDING GEAR CAN ACCIDENTALLY RETRACT. THIS CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS IN THE DOOR MECHANISMS OF THE MLG AND NLG. THE DOOR MECHANISMS CAN ACCIDENTALLY CLOSE THE LANDING GEAR DOORS. THIS
CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.
(1) Placard and select all aircraft electrical power to OFF. Obey all relevant WARNINGS and CAUTIONS (refer to AMM TASK 24-00-00-861-802 and TASK 24-00-00-910-801).
(2) Make sure that lock pins are installed through each main gear and main gear doormechanism.
(3) Makesurethenosegeargroundlockisengaged.
(4) Setwheelchocksinfrontandbehindthelandinggeartire s.
(5) Set up work platforms as required to gain access to the horizontal stabilizer.
Makesuretheworkplatformsareelectricallygrounded.
B. Procedure
(1) Remove the LH and RH elevator structure assemblies 85527 021-005 and 85527021-006fromtheaircraftrespectively(refertoAMMT ASK27-34-01-000-801).
(2) Doadetailedvisualinspectionoftheelevatorfrontspa rcaps,upper(85527122)and lower(85527169)anddoadetailedinspectionoftheuppersk inpanel(85527102).If damagefound,contactDHCtechnicalhelpdeskforanapprove drepair.
(3) PuttheLHandRHelevatoronaflatsurfaceandsecureinpl acewithstrapsduring rework.
(4) RemovetherivetsfromtheLHandRHlowermiddleskinpane l85527112(referto SRMTASK51-42-15-02-01).
SERVICE BULLETIN 84-55-15 GN S.B.84-55-1530Jan2024 Revision‘A’07Jan2025 Page10of20
(5) RemovetheLHandRHlowermiddleskinpanel85527112.
(6) Perform Bolt Hole Eddy Current (BHEC) inspection at the holes where fasteners areremoved(refertoFigure1andNDTPSM1-84-7A,Part6TASK 51-00-05-250-801).
(a) Ifanycracksarefound,contactDHCtechnicalhelpdeskf orsupport.
(7) Removepressuresensitivetapefromtheaffectedlighte ningholesoftheelevator.
(8) Perform BHEC inspection on the front spar where the fasteners are removed (refertoFigure1andNDTPSM1-84-7A,Part6TASK51-00-05-2 50-801).
(a) Ifanycracksarefound,contactDHCtechnicalhelpdeskf orsupport.
(9) SolventcleanthesurfaceasperSRMTASK51-26-00-02-01 .
(10) Drill holes on thefront spar at the correctlocations forthe installationof thesolid rivets. Remove the burrs and touch-up with F19 primer (referto Figure 1 and SRMTASK51-25-10-02-01).
(11) Perform HFEC inspection at bend radius of ribs 12-13 and13-14 lightening hole to detect radial cracking (refer to Figure 1 and NDT PSM 1-84-7A, Part 6 TASK 51-00-08-250-801).
(a) Ifanycracksarefound,contactDHCtechnicalhelpdeskf orsupport.
(12) Applythesealanttothefayingsurfacesofthedoublers andcomponents(referto SRMTASK51-23-00-00-01).
(13) Installthedoubler85520121-105usingsolidrivetsB0 205016AD4-6Sbetweenthe ribs13and14(refertoFigure1,2andSRM51-42-05-02-01).
NOTE 1: Pickupexistingrivetholes.Ifrequired,useoversizedrep airrivets(refer toSRM51-42-05-02-01).
NOTE 2: Maintain a minimum distance of two times the fastener diameter edge distance from the center of the hole to the nearest material edge.
Maintain minimum pitch of four times the fastener diameter to the nearestfastener.