On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 17
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0585; AD 2018-22-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6076a8a59881087bf934581d010e015e8d98a7fa91220ad2597c0b3c40858f16' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6076a8a59881087bf934581d010e015e8d98a7fa91220ad2597c0b3c40858f16' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Discard the Revision 02 of this Service Bulletin dated Jul 27/2018, and replace in its entirety with Revision 03.
Service Bulletin No. 700−26−6003 Date of Basic Issue Dec 28/2017 Revision No. 01 Dated Feb 15/2018 Revision No. 02 Dated Jul 27/2018 Revision No. 03 Dated Aug 24/2018 This revision has no effect for aircraft on which the Basic Issue or Revision 01 or Revision 02 of this Service Bulletin was done thus no other action is necessary. Do not sign the log book if you have not done this revision. Keep the previous log book entry. You may make an entry as “Not Applicable” for this revision.
This revision is issued to:
1. Revise, in Paragraph 1.I, W&B is No Change.
2. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN MODEL BD−700−1A10 (BD−700) 700−26−6003 Page 1 of 1
REVISION TRANSMITTAL SHEET
SPECIAL CHECK/MODIFICATION - FIRE EXTINGUISHING SYSTEM - SQUIB CONNECTORS A111P2, A112P1 AND A111P3 WIRE LENGTHS The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME Within 1000 flight hours or 15 months, whichever comes first EFFECTIVITY: A/C Serial No. 9313, 9381 and 9432 to 9839 MANPOWER: 1.5 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES TLMC, CH 5 AFFECTED NOYES KITS and/or PARTS YES NO
TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE NOYES PREREQUISITE SERVICE BULLETINS: N/A NOTE: This Service Bulletin is subject to an Airworthiness Directive CF−2018−08R1, which will make it necessary to implement this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY my.businessaircraft.bombardier.com MODEL BD−700−1A10 (BD−700) ATA 26−21
FIRE PROTECTION Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 1 of 1 This Service Bulletin is available at:
SPECIAL CHECK/MODIFICATION - FIRE EXTINGUISHING SYSTEM - SQUIB CONNECTORS A111P2, A112P1 AND A111P3 WIRE LENGTHS
1. PLANNING INFORMATION NOTE: Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure that this bulletin can be completed.
A. Effectivity BD−700−1A10 aircraft, Serial No. 9313, 9381 and 9432 to 9839 NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aerospace Service Bulletin(s).
B. Reason
1. Condition:
It was discovered that the wire lengths of connectors A111P2 and A111P3 of FIREX bottle No. 1 and A112P1 of FIREX bottle No. 2 allowed for interconnection of connectors between bottles.
2. Evidence:
The connectors from the FIREX bottles all have the same connector keyway, thus the potential for the aircraft harness connectors to be connected to the wrong mating connector on the FIREX bottles.
SERVICE BULLETIN my.businessaircraft.bombardier.com MODEL BD−700−1A10 (BD−700) ATA 26−21
FIRE PROTECTION Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
2017−2018 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 1 of 13 This Service Bulletin is available at:
3. Objective/Benefit:
The incorporation of this Service Bulletin will eliminate the possibility of the aircraft harness connectors to connect to the wrong mating connectors on the FIREX bottles.
C. Description This Service Bulletin gives instructions to:
− Get access to the FIREX system discharge cartridges, − Verify that the aircraft harness connectors are connected to the appropriate mating connector on the discharge cartridges, − Install lanyards on affected connectors, and − Do the necessary tests to make sure that the system operate(s) correctly as required.
D. Compliance Recommended within 1000 flight hours or 15 months, whichever comes first NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the configuration of the aircraft, send an SRPSA for analysis to get an approved disposition to complete this Service Bulletin.
E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA under the Canada/EU bilateral Aviation Safety Agreement.
MODEL BD−700−1A10 (BD−700) Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 2 of 13
F. Manpower NOTES: 1. The man−hours given are to help you schedule the tasks given in this Service Bulletin. The man−hours are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.
For more information related to the manpower, refer to SB 700−00−6002.
2. Labor hours are based on the fact that the modification will be done at the next scheduled maintenance task or inspection. Therefore no man−hours are allotted to prepare the aircraft for maintenance or to prepare for this Service Bulletin.
1.5 man−hours are necessary to do this special check/modification.
NOTE: It is assumed that the equipment has been put in a maintenance status. The man−hour estimates do not include time for preparation, jacking of the aircraft, close−out or administrative functions.
The labor required to do this Service Bulletin is at no cost if:
− the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and − this Service Bulletin is scheduled within 1000 flight hours or 15 months, whichever comes first, from its release date (Basic Issue).
G. Material − Cost and Availability Kit 700K26−6003 is necessary to do this special check/modification.
KIT NO. PRICE 700K26−6003 Please contact Bombardier Aerospace Parts Services, in Montreal, for delivery lead times and confirmation of prices.
Sufficient kits will be kept for the estimated amount of orders.
The kit can be purchased by sending a purchase order to Bombardier Aerospace Parts Services, Montreal.
This kit is available at no cost if:
a no−charge purchase order is sent to Bombardier Aerospace in less than 1000 flight hours or 15 months, whichever comes first, from this Service Bulletin release date Basic Issue.
MODEL BD−700−1A10 (BD−700) Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 3 of 13
Smart Parts Program will not pay for the kit(s).
H. Tooling The equipment and tools listed below are necessary to do this special check/modification:
GSE REFERENCE NO. PART NO. DESCRIPTION GSE 20X−10−01 S4933959−501 Tag, Circuit Breaker (Red Ring) NOTES: 1. Refer to the Global 6000 Illustrated Tool and Equipment Manual (ITEM) to make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM, for the G6000 for acceptable GSE equivalents.
3. This list is provided for quick reference. In case of discrepancy between this list and the tools called in the SPM, WM, Chapter 20, then the tools called in the SPM, WM prevail. Other approved alternative tools are acceptable and can also be used.
I. Weight and Balance No Change J. Electrical Load Data No change.
K. References − Bombardier Aerospace, Modification Summary, R700T400673, Rev. B−1.
− Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C−01694, Rev. A−1.
− Bombardier Aerospace, Kit Drawing KGC991−1551, Rev. A.
− TCCA Airworthiness Directive, CF−2018−08R1.
− Global 6000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 6, 24, 26, 52 and 53.
− Global 6000 BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 26.
L. Other Publications Affected − Global 6000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 26.
− Global 6000 BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 26.
MODEL BD−700−1A10 (BD−700) Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 4 of 13
M. Equivalent Service Bulletins For the Global Express and Global Express XRS BD−700−1A10 aircraft, use SB 700−26−011.
For the Global 5000 BD−700−1A11 aircraft, use SB 700−1A11−26−004.
For the Global 5000 BD−700−1A11 Featuring Global Vision Flight Deck aircraft, use SB 700−26−5003.
2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the Global 6000 BD−700−1A10, Aircraft Maintenance Manual (AMM) unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the Global 6000 BD−700−1A10, Aircraft Maintenance Manual (AMM), Chapter 6.
A. Aircraft Setup NOTE: The steps in the Aircraft Setup section of this Service Bulletin are recommended steps. The steps give a recommendation to get access to the work area. This recommendation is to give a safe work area and to minimize possible damage to surrounding aircraft parts. Alternative steps can be used at the operator’s discretion.
(1) Obey all the electrical/electronic safety precaution. Refer to AMM 24−00−00−910−802.
(2) Obey all the electrostatic discharge safety precautions. Refer to AMM 24−00−00−910−802.
MODEL BD−700−1A10 (BD−700) Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 5 of 13
(3) In the flight compartment, on the EMS CDU, set the circuit breakers that follow, in the specified sequence, to LOCKED. Refer to AMM 24−00−00−863−801:
SYSTEM NAME CIRCUIT BREAKER NAME
BUS NAME
FIRE FIRE DETECT CH A BATT
FIRE FIRE DETECT CH B BATT NOTE: Make sure you obey the sequence instruction for the circuit breakers.
If you do not do this, nuisance faults can be stored in the FIDEEX system.
(4) Open and tag, in the specified sequence, the circuit breakers that follow:
LOCATION CB NO. NAME ZONE DCPC A1 FIREX CH A 130 DCPC A2 FIREX CH B 130 NOTE: Make sure you obey the sequence instruction for the circuit breakers.
If you do not do this, nuisance faults can be stored in the FIDEEX system.
(5) In the flight compartment, on the EMS CDU, set the circuit breakers that follow to LOCKED. Refer to AMM 24−00−00−863−801:
SYSTEM NAME CIRCUIT BREAKER NAME
BUS NAME
FIRE APU FIRE HANDLE BATT
FIRE L FIRE HANDLE BATT
FIRE R FIRE HANDLE BATT
(6) Open the APU access doors. Refer to AMM 52−43−00−010−801.
(7) Remove the tailcone access panel (310BZ) Refer to AMM 53−50−01−000−801.
B. Inspection/Modification NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the configuration of the aircraft, submit an SRPSA for analysis to get an approved disposition to complete this Service Bulletin.
MODEL BD−700−1A10 (BD−700) Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 6 of 13
WARNING: MAKE SURE THAT THE ELECTRICAL CIRCUITS ARE NOT
ENERGIZED WHEN YOU CONNECT THE ELECTRICAL CONNECTOR TO THE DISCHARGE CARTRIDGE. IF THE
ELECTRICAL CIRCUITS ARE ENERGIZED, THE DISCHARGE CARTRIDGE CAN FIRE ACCIDENTALLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO THE EQUIPMENT.
(1) Inspect connectors A111P2, A112P1 and A111P3 as follows:
(a) Verify that aircraft connectors A111P2, A112P1 and A111P3 are connected to the correct mating connector on the FIREX bottle No 1. and FIREX bottle No. 2.
The connectors A111P2 and A111P3 must be connected to the FIREX bottle No. 1 and connector A112P1 must be connected to the FIREX bottle No. 2. Refer to Kit Drawing KGC991−1551.
NOTE: Refer to the connectors Identification labels, which are located on the aircraft structure and on the connectors harness side, to make sure that they are correctly connected.
The mentioned connectors all have the same keyway thus the possibility of misconnection.
(b) If any connectors in Paragraph 2.B.(1) are not correctly connected to their mating connectors, disconnect and connect them to the appropriate mating connectors on the FIREX bottles. Use the new lanyards as per instructions given in Kit Drawing KGC991−1551 and continue with Paragraph 2. B.(2) below.
NOTE: If connectors are all connected correctly, continue with Paragraph
2.B.(2) below.
(2) Install split ring lanyards Part No. 670−001H07−54−5.5, to connectors A111P2, A112P1 and A111P3 as follows:
(a) Loosen backshell to install the lanyard between the backshell and connector.
(b) Attach one end of the split ring lanyard to the fastener of the last clipping point for connectors A111P2, A112P1 and A111P3. Use lanyard Part No.
670−001H07−54−5.5. Refer to Kit Drawing KGC991−1551.
NOTE: It is also permissible to rotate the clamps of the last clipping point for all connectors to minimize fouling condition between the lanyard and the adjacent parts.
(c) Attach the split ring side of the lanyard to the connectors. Refer to Kit Drawing KGC991−1551.
NOTE: You should be able to install the split ring side of the lanyards without disconnecting the connectors from the FIREX bottles.
After the installation of the lanyards, the connectors length after the last clipping point will be restricted thus eliminating the possibility of misconnection.
MODEL BD−700−1A10 (BD−700) Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 7 of 13
(d) Torque clamp screws from 20 to 25 lbf in (2.26 to 2.82). Refer to SPM Chapter 20 "Torquing of Threaded Fasteners".
(3) In the flight compartment, on the EMS CDU, set the circuit breakers that follow to IN. Refer to AMM 24−00−00−863−802:
SYSTEM NAME CIRCUIT BREAKER NAME
BUS NAME
FIRE APU FIRE HANDLE BATT
FIRE L FIRE HANDLE BATT
FIRE R FIRE HANDLE BATT
(4) Remove the tags and close, in the specified sequence, the circuit breakers that follow:
LOCATION CB NO. NAME ZONE DCPC A1 FIREX CH A 130 DCPC A2 FIREX CH B 130 NOTE: Make sure you obey the sequence instruction for the circuit breakers.
If you do not do this, nuisance faults can be stored in the FIREX system.
(5) In the flight compartment, on the EMS CDU, set the circuit breakers that follow, in the specified sequence to IN. Refer to AMM 24−00−00−863−802.
SYSTEM NAME CIRCUIT BREAKER NAME
BUS NAME
FIRE FIRE DETECT CH B BATT
FIRE FIRE DETECT CH A BATT NOTE: Make sure you obey the sequence instruction for the circuit breakers.
If you do not do this, nuisance faults can be stored in the FIDEEX system.
C. Testing
(1) If any of the connectors were disconnected from the FIREX bottles, do the operational test of the fire extinguishing system. Refer to AMM 26−21−00−710−801.
(2) On the engine indication and crew alerting system (EICAS), on the primary page, make sure you do not get FIDEEX fault messages.
(3) Remove the electrical power from the aircraft as required. Refer to AMM 24−00−00−861−802.
MODEL BD−700−1A10 (BD−700) Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 8 of 13
D. Close−out NOTE: The steps in the Close−Out section of this Service Bulletin, except for the return−to−service tests, are recommended steps. The steps give a recommendation to install components removed during the Aircraft Set−Up. This recommendation is to make sure that the aircraft is safe and ready to return to service. Alternative steps can be used at the operator discretion.
(1) Install the tailcone access panel (310BZ). Refer to AMM 53−50−01−400−801.
(2) Remove all tools, equipment, and unwanted materials from the work area.
(3) Close the APU access doors. Refer to AMM 52−43−00−410−801.
E. Recording When this Service Bulletin is completed, make an entry in the aircraft log and send the attached Incorporation Notice to Bombardier Business Aircraft Customer Services (BBACS).
In an effort to improve the quality of our technical communications, we are requesting your feedback. Please take a moment to fill out our easy on−line Service Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION A. Kit Kit 700K26−6003 is necessary to do this Service Bulletin and contains the parts that follow:
NEW PART NO. QTY ITEM USED PART NO.
INSTRUCTIONS -
DISPOSITION 670−001H07−54−5.5 3 Lanyard Assembly
N/A N/A NOTES: 1. In case of discrepancy between this list and the Service Bulletin Kit Parts List contained in the respective kit, then the latter list prevails.
2. The actual quantity for some of the hardware contained in the kit can be greater than the amount shown in the table as these items are supplied in prepackaged quantities.
B. Parts No parts required.
MODEL BD−700−1A10 (BD−700) Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 9 of 13
C. Material No consumables are required.
D. Publications The publications that follow are required after this Service Bulletin has been incorporated.
− Global 6000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 26.
− Global 6000 BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 26.
MODEL BD−700−1A10 (BD−700) Basic Issue: Dec 28/2017 Revision 03: Aug 24/2018 700−26−6003 Page 10 of 13