Service bulletin · Bombardier

No revision namedSB 700-36-7503 Basic · 157 pages · 25.1 MB

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-2139; AD 2024-06-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2023-2139 (document 0005) · AD 2024-06-08

Manufacturer
Bombardier
Type
Service Bulletin
Number
700-36-7503

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 157Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-2139; AD 2024-06-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '6b51d525d2159fd09c13e3e6a5c42f365424af7d2062535a05d583748f80fc46'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

SPECIAL CHECK – BLEED-AIR LEAK-DETECTION SYSTEM –

SPECIAL CHECK ON THE KIDDE LEAK-DETECTION ELEMENTS The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.

RECOMMENDED

SPECIFIED TIME COMPLIANCE

COMPLIANCE TIME Within 120 months or 3500 flight hours whichever comes first from this Service Bulletin release date (Basic Issue) EFFECTIVITY: A/C Serial No. 70006 to 70096 MANPOWER: Refer to Paragraph 1.F.

CONTINUED AIRWORTHINESS (CAW)

FLEET CAMPAIGN YES NO

AIRWORTHINESS LIMITATIONS (AWL) NOYES KITS and/or PARTS YES NO

TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO

DEDICATED SCHEDULE NOYES PREREQUISITE SERVICE BULLETINS: NA NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make it necessary to implement this Service Bulletin.

To place an order for parts, please call Bombardier Aviation Parts Services at:

514−855−2999 or 1−866−538−1247

SERVICE BULLETIN SUMMARY my.businessaircraft.bombardier.com MODEL BD−700−2A12 (BD−700) ATA 36−22

PNEUMATIC Basic Issue: Dec 23/2022 700−36−7503 Page 1 of 1 This Service Bulletin is available at:

SPECIAL CHECK – BLEED-AIR LEAK-DETECTION SYSTEM –

SPECIAL CHECK ON THE KIDDE LEAK-DETECTION ELEMENTS

1. PLANNING INFORMATION NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or equivalent action changes to make sure that this Service Bulletin can be completed.

2. To reduce operator downtime due to aircraft set−up, access, close−out and return to service testing, Bombardier is recommending that the work is done at the 144 month scheduled maintenance event while still respecting the Service Bulletin compliance time. Refer to Paragraph 1.F.

3. Due to limited parts, facilities shall only order a loop when they have a confirmed failure.

4. Send all Test Results to Bombardier Customer Support Engineering through the SRPSA form to SRPSA@aero.bombardier.com or through Salesforce for BAS Facilities.

5. For any technical issues, contact CSE, Technical Support, Global Express by e−mail at SRPSA@aero.bombardier.com.

A. Effectivity BD−700−2A12 aircraft, Serial No. 70006 to 70096.

NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aviation Service Bulletin(s).

SERVICE BULLETIN my.businessaircraft.bombardier.com MODEL BD−700−2A12 (BD−700) ATA 36−22

PNEUMATIC Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.

This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.

 2022 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.

Basic Issue: Dec 23/2022 700−36−7503 Page 1 of 152 This Service Bulletin is available at:

B. Reason

1. Condition:

LDL elements delivered by Kidde Fire protection to LTS are not able to properly detect leakages according to the temperature defined in the specification. Some of the Leak Detection Loop (LDL) elements supplied by Kidde Aerospace & Defense may be non−conforming and these elements present a risk due to the inability to detect a bleed air leak

2. Evidence:

ATP software used to test the Leak Detection Loop (LDL) elements has certain deficiency within the test equipment which result to a probability of having certain non−complaint Leak Detection Loop (LDL) elements delivered to Bombardier.

3. Objective/Benefit:

This Service Bulletin introduces an on−wing test procedure to test the serviceability (examine the functionality) of each LDL element installed on the aircraft and to replace those that have failed.

C. Description This Service Bulletin gives general instructions to:

− Gain access to the pylons, − Gain access to the equipment bay, − Gain access under the baggage bay, − Remove the belly fairings, − Gain access to the left slats, − Gain access to the right slats, − Do the heat gun temperature verification, and − Do the flight compartment setup.

This Service Bulletin gives instructions in PART A to:

− Do the test procedure at each location for the LDL elements in the Pylons, − Fill out Appendix A with Test Results, and − Replace the defective LDL element if necessary.

This Service Bulletin gives instructions in PART B to:

− Do the test procedure at each location for the LDL elements in the equipment bay, − Fill out Appendix A with Test Results, and − Replace the defective LDL element if necessary.

MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 2 of 152

This Service Bulletin gives instructions in PART C to:

− Do the test procedure at each location for the LDL elements under the baggage bay, − Fill out Appendix A with Test Results, and − Replace the defective LDL element if necessary.

This Service Bulletin gives instructions in PART D to:

− Do the test procedure at each location for the LDL elements in the belly fairings, WUSS and fairing leading edge, − Fill out Appendix A with Test Results, and − Replace the defective LDL element if necessary.

This Service Bulletin gives instructions in PART E to:

− Do the test procedure at each location for the LDL elements in the left slats, − Fill out Appendix A with Test Results, and − Replace the defective LDL element if necessary.

This Service Bulletin gives instructions in PART F to:

− Do the test procedure at each location for the LDL elements in the right slats, − Fill out Appendix A with Test Results, and − Replace the defective LDL element if necessary.

D. Compliance Recommended in less than 120 months or 3500 flight hours, whichever comes first from this Service Bulletin release date (Basic Issue).

NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the aircraft configuration, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin. Standard SRPSA fees may apply. Refer to the Services section of the Bombardier Customer Portal for the latest prices, rates and fees.

E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93−Q−02.

NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.

2. The technical content of this Service Bulletin is accepted by EASA under the Canada/EU bilateral Aviation Safety Agreement.

MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 3 of 152

F. Manpower NOTES: 1. The man−hours given are to help you schedule the tasks given in this Service Bulletin. The man−hours are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.

For more information related to the manpower, refer to SB 700−00−7502.

2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the man−hours and should be considered for planning purposes before you schedule this Service Bulletin.

3. To reduce operator downtime due to aircraft set−up, access, close−out and return to service testing, Bombardier is recommending that the work is done at the 144 month scheduled maintenance event while still respecting the Service Bulletin compliance time. Refer to Paragraph 1.F.

1. If the aircraft is in scheduled heavy−maintenance: 214 total man−hours are necessary to complete this Service Bulletin.

2. If the aircraft is outside scheduled heavy−maintenance: 404 total man−hours are necessary to complete this Service Bulletin. The breakdown of the man−hours is as follows:

− 17 man−hours are necessary to do PART A of this Service Bulletin.

− 23 man−hours are necessary to do PART B of this Service Bulletin.

− 7 man−hours are necessary to do PART C of this Service Bulletin.

− 85 man−hours are necessary to do PART D of this Service Bulletin.

− 116 man−hours are necessary to do PART E of this Service Bulletin.

− 116 man−hours are necessary to do PART F of this Service Bulletin.

− 40 man−hours are necessary for Repaint time of this Service Bulletin.

The labor required to do this Service Bulletin when the aircraft is in or outside scheduled heavy−maintenance is at no cost if:

− the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and − this Service Bulletin is scheduled in less than 120 months from this Service Bulletin release date (Basic Issue).

G. Material − Cost and Availability NOTE: If material coverage is required due to a part failure, a scrap certificate will be required. Claims will not be approved without the necessary scrap certificate. Please see scrap certificate attached with the Service Bulletin.

MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 4 of 152

No kit is necessary to do this special check. For material data refer to paragraph 3.C.

The parts in Paragraph 3.B. may be necessary to do this Service Bulletin.

NOTE: Due to limited parts, facilities shall only order a loop when they have a confirmed failure.

The parts are available at no cost if:

− a no−charge purchase order is sent to Bombardier Aviation in less than 120 months from this Service Bulletin release date (Basic Issue).

For all parts transactions, Bombardier Aviation’s current Spare Parts and Component Repair Price Catalogue General Terms and Conditions apply. These terms and conditions are found on the Bombardier Customer Portal at:

my.businessaircraft.bombardier.com Smart Parts does not pay for this recommended Service Bulletin at any time.

H. Tooling The equipment and tools listed below are necessary to do this special check:

1. For Avionics Suite Method:

GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available − Blanket, Heat Insulating Commercially Available HH501BJK or Fluke289 (or equivalent) Digital Multimeter Type K input 32− 1100°F (0−594°C) Tolerance ±4°F (±2.2°C or 0.75% (whichever is greater) 32−104°F (0−40°C) operate temp Commercially Available STEINEL Model HG2320 E (or equivalent) Heat Gun (capable of 0 to 350°C (32 to 662°F) hot air delivery with tolerance of ±10°F or ±5°C) (Qty 2) Commercially Available − Heat Gun, Extension,Flexible MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 5 of 152

GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available − Kevlar Sleeves Commercially Available KMQSS−062U−12 orequivalent K Type Thermocouple (or equivalent) Range 0 to 594°C (32 to 1100°F) Allowable tolerance is ±2.2°C (±4°F or 0.75%, whichever is greater.

Commercially Available − Green & Black Sharpie marker or equivalent permanent marker Commercially Available − Scraper, Non−Metallic Commercially Available − Sharp Knife Commercially Available STEINEL 07051 orequivalent Heat Gun Shield (Qty 2) Commercially Available − Stopwatch. Range 2 minutes minimum.

Tolerance 1 second resolution (±5 secs over range.

Commercially Available − Walkie Talkies Commercially Available − Torque Wrench

2. For LCR Meter Test Method:

GSE REFERENCE NO. PART NO. DESCRIPTION 27X78K−81−01 − Slat−riggingcontour−boards kit MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 6 of 152

GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available BK879B or equivalent LCR Meter 1 kHz test frequency ±5%

0.6−1.0 Vrms test level 0 VDC ±0.02 VDC 0 to 40 kΩ Z impedance (±5%) 0 to 40°C (32 to 104°F) operate temp Commercially Available HH501BJK or Fluke289 (or equivalent) Digital Multimeter Type K input 32− 1100°F (0−594°C) Tolerance ±4°F (±2.2°C or 0.75% (whichever is greater) 32−104°F (0−40°C) operate temp Commercially Available STEINEL Model HG2320 E(or equivalent) Heat Gun (capable of 0 to 350°C (32 to 662°F) hot air delivery with tolerance of ±10°F or ±5°C) (Qty 2) Commercially Available KMQSS−062U−12 orequivalent K Type Thermocouple (or equivalent) Range 0 to 594°C (32 to 1100°F) Allowable tolerance is ±2.2°C (±4°F or 0.75%, whichever is greater.

Commercially Available 1146006−0254−00 LCR−LDL GSEHarness Commercially Available 1148006−0254−00 LCR−LDL GSEHarness Commercially Available − Green & Black Sharpie marker or equivalent permanent marker Commercially Available − Scraper, Non−Metallic MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 7 of 152

GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available − Sharp Knife Commercially Available STEINEL 07051 orequivalent Heat Gun Shield (Qty 2) Commercially Available − Stopwatch. Range 2 minutes minimum.

Tolerance 1 second resolution (±5 secs over range.

Commercially Available − Walkie Talkies Commercially Available − Torque Wrench NOTES: 1. Refer to the Global 7500 Illustrated Tool and Equipment Manual (ITEM) to make sure that you use the correct equipment configuration.

2. Refer to the Liability Statement in the ITEM for the G7500 for acceptable GSE equivalents.

3. This list is provided for quick reference. In case of discrepancy between this list and the tools called in the AMP, WM, Chapter 20, then the tools called in the AMP, WM prevail. Other approved alternative tools are acceptable and can also be used.

I. Weight and Balance No change.

J. Electrical Load Data No change.

K. References − TCCA Airworthiness Directive, (pending).

− Bombardier Aviation, Restriction and/or Special Instruction (RSI), C−70591, Rev. NC.

− Liebherr, VSB CFD−F1958−26−01 Initial Issue, 6 May 2022.

− Kidde Aerospace and Defense SB CFD−26−1 Revision 6, dated 28 February 2022.

− Global 7500, Aircraft Maintenance Publication (AMP), Chapters 6, 7, 12, 20, 24, 25, 27, 30, 36, 52, 53, 54 and 57.

MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 8 of 152

− Global 7500, Supplemental Aircraft Maintenance Publication (AMP), Chapter 25.

− Appendix A − Test Results Sheet.

− Appendix B − Test Locations.

− SB Zeq Calculator Worksheet − (Attached).

− Scrap Certificate− (Attached).

L. Other Publications Affected None.

M. Equivalent Service Bulletins None.

2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the Global 7500 BD−700−2A12, Aircraft Maintenance Publication (AMP) unless otherwise specified.

2. All references made to zones, access panels and/or doors, are from the Global 7500 BD−700−2A12 Aircraft Maintenance Publication (AMP), Chapter 6.

3. References made to SAMP will be shown as per example (BD700−A−J25−29−XX). Remaining numbers represented by XX will be different for different operators depending on their configuration.

A. Aircraft Setup

(1) Pressure defuel aircraft. Refer to BD700−A−J12−11−03−00AAA−221A−A.

NOTE: Applicable for PART E and PART F only.

(2) Place aircraft on jacks and level. Refer to BD700−A−J07−10−01−00AAA−172A−A.

NOTE: Applicable for PART E and PART F only.

(3) Obey all electrical/electronic safety precautions. Refer to BD700−A−J24−00−00−00AAA−012A−A.

(4) Obey all bleed air leak detection system safety precautions. Refer to BD700−A−J36−22−00−00AAA−913A−A.

(5) Set the circuit breakers that follow to LOCKED. Refer to BD700−A−J24−00−00−02AAA−561A−A:

(a) On the DC Electrical Power Center (DC EPC) No. 2, open and tag the circuit breakers that follow:

MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 9 of 152

NAME CB NUMBER/LOCATION IASC 1A DC−EPC2−E06 IASC 2B DC−EPC2−A02

(b) On the circuit breaker panel, open and tag the circuit breaker that follows:

NAME CB NUMBER/LOCATION IASC 1B CBP−J06

(c) On the DC EPC No. 1, open and tag the circuit breaker that follows:

NAME CB NUMBER/LOCATION IASC 2A DC−EPC1−A05 PART A − Pylon Access

(6) Remove the pylon fixed−trailing−edge access−panel (413BB/423BB). Refer to BD700−A−J54−52−11−00AAA−520A−A.

(7) Remove the pylon center−box access−panels (412BT/422BT), (412BB/422BB), and (412CB/422CB). Refer to BD700−A−J54−52−09−00AAA−520A−A.

(8) Remove the ECS Precooler Inlet assembly.

BD700−A−J36−11−20−00AAA−520A−A.

PART B − Equipment Bay Access

(9) Do the procedure to open the aft equipment−compartment door (185KL). Refer to BD700−A−J52−41−01−00AAA−540A−A.

PART C − Baggage Bay Access

(10) Remove the baggage compartment carpet. Refer to SAMP BD700−A−J25−29−XX.

(11) Remove the aft fuselage floor−panels (251ALF) and (251DLF). Refer to BD700−A−J53−41−01−00AAA−520A−A.

PART D − Belly Access, WUSS and Fairing Leading Edge

(12) Remove the left panel assembly (181AL). Refer to BD700−A−J53−61−21−00AAA−520A−A.

(13) Remove the right panel assembly (182AR). Refer to BD700−A−J53−61−23−00AAA−520A−A.

(14) Remove the forward under wing panel (183AB). Refer to BD700−A−J53−63−11−00AAA−520A−A.

MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 10 of 152

(15) Remove the mid underwing panels (183BB) and (184BB). Refer to BD700−A−J53−63−21−00AAA−520A−A.

(16) Remove the aft under wing panels (183CB) and (184CB). Refer to BD700−A−J53−63−31−00AAA−520A−A.

(17) Remove the inboard−wing upper−leading−edge access−panels (521AT/621AT) and (521BT/621BT). Refer to BD700−A−J57−41−06−00AAA−520A−A.

(18) Remove the fixed−leading−edge outboard access panels (523BA/623BA).

Refer to BD700−A−J57−41−19−00AAA−520A−A.

(19) Remove the main−landing−gear wheel bins (165AZ), (165BZ), (166AZ) and (166BZ). Refer to BD700−A−J53−30−01−00AAA−520A−A.

(20) Remove the fixed−leading−edge fixed cuff panels (523AA/623AA). Refer to BD700−A−J57−41−17−00AAA−520A−A.

(21) Remove the left forward panel−assembly (185AB). Refer to BD700−A−J53−67−11−00AAA−520A−A.

(22) Remove the left mid panel assembly (185CB). Refer to BD700−A−J53−67−21−00AAA−520A−A.

(23) Remove the right forward panel−assembly (186AB). Refer to BD700−A−J53−67−13−00AAA−520A−A.

(24) Remove the right mid panel−assembly (186CB). Refer to BD700−A−J53−67−31−00AAA−520A−A.

PART E − Left Slat Access

(25) Remove the inboard−wing lower−leading−edge access−panels (521HB), (521LB) and (521RB). Refer to BD700−A−J57−41−11−00AAA−520A−A.

(26) Remove the mid−wing lower leading−edge access−panels (531CB to 531SB).

Refer to BD700−A−J57−41−12−00AAA−520A−A.

(27) Remove the mid−wing lower leading−edge access−panels (531DB), (531JB) and (531NB). Refer to BD700−A−J57−41−12−00AAA−520A−A.

(28) Remove the outboard−wing lower leading−edge access panels (541FB) and (541LB). Refer to BD700−A−J57−41−13−00AAA−520A−A.

(29) Remove the inboard−wing lower−leading−edge access−panels (521NB). Refer to BD700−A−J57−41−11−00AAA−520A−A.

(30) Remove the outboard−wing lower leading−edge access panels (541AB). Refer to BD700−A−J57−41−13−00AAA−520A−A.

(31) Remove the slat No. 1 access panels (511AA), (511BA), (511DA), (511GA), (511JA) and (511KA). Refer to BD700−A−J57−42−11−00AAA−520A−A.

(32) Remove the slat No. 2 access panels (512AA), (512BA), (512CA), (512DA) and (512EA). Refer to BD700−A−J57−42−33−00AAA−520A−A.

(33) Remove the slat No. 3 access panels (513AA), (513BA), (513CA), (513DA) and (513EA). Refer to BD700−A−J57−42−35−00AAA−520A−A.

MODEL BD−700−2A12 (BD−700) Basic Issue: Dec 23/2022 700−36−7503 Page 11 of 152