Service bulletin · Bombardier

Revision DSB 84-28-09 RD · 23 pages · 213 KB

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2014-0583; AD 2015-17-25 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2014-0583 (document 0006) · AD 2015-17-25

Manufacturer
Bombardier
Type
Service Bulletin
Number
84-28-09
Latest revision known
84-28-09, Revision D, dated January 29, 2013

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 23

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2014-0583; AD 2015-17-25 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '5d036d8596fb73ed8051887b65dfec50e0395059479a0763e9d8abe6f091371e'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Revision ‘D’ 29 Jan 2013 DHC-8 (DASH 8) SERVICE BULLETIN 84-28-09 Fuel System - Center Wing - Engine Fuel Feed - Introduction of New Tube Assemblies To Eliminate Fouling Conditions - ModSum 4-113643 This page transmits Revision ‘D’ of Service Bulletin 84-28-09, pages 1 thru 18 dated 29 Jan 2013.

This service bulletin is re-issued in its entirety for the reasons that follow:

- deleted existing statements from page 1 of service bulletin

- modified existing statements on page 1, page 4 and page 6 of service bulletin

- added new statement to page 1 of service bulletin -t h e References section is revised to convey the latest revision of the service bulletin and engineering documentation.

The Compliance in the previous issues of this service bulletin is not affected by this revision. No additional rework to the aircraft is introduced by this revision.

Remove the previous revision of Service Bulletin 84-28-09 and replace with attached.

Previous issues of Service Bulletin 84-28-09:

Initial issue - Pages 1 thru 18 dated 22 Jun 2010 Revision ‘A’- Pages 1 thru 18 dated 01 Sep 2010 Revision ‘B’- Pages 1 thru 18 dated 14 Feb 2011 Revision ‘C’- Pages 1 thru 18 dated 17 Aug 2012

No text on this page: it may be a figure. Open the PDF to see it.

D S.B. 84-28-09 Page 1 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG

SERVICE BULLETIN Customer Support ATA SYSTEM: 2812 NUMBER: 84-28-09

BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS

SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND

URGES OPERATORS TO PROMPTLY EVALUATE THE CONTENTS SUBJECT: Fuel System - Center Wing - Engine Fuel Feed - Introduction of New Tube Assemblies To Eliminate Fouling Conditions - ModSum 4-113643 Upon incorporation of SB 84-28-09, a fouling condition was identified due to the post mod fuel pipe 82822144-003 (part of kit number 8MK4429-001).

In order to address this condition, Bombardier has issued Modsum 4-113754 (Bombardier Service Bulletin 84-28-14) which replaces pipe 82822144-003 introduced by SB 84-28-09.

-deleted- -deleted- If SB 84-28-09 is not incorporated or ModKit 8MK4429-001 has not been ordered then it is required to incorporate SB 84-28-15 in lieu of SB 84-28-09 and SB 84-28-14.

All future installations will be accomplished using the latest issue of Service Bulletin 84-28-15.

SERVICE BULLETIN 84-28-09 S.B. 84-28-09 Page 2 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG

1. PLANNING INFORMATION A. Effectivity Aircraft Affected:

In-Service: DHC-8 Aircraft Model 402 Serial Number 4001, 4003, 4004, 4006, 4008 thru 4331.

Verification: ModSum 4-113643 has been installed on DHC-8 Aircraft Model 402 Serial Number 4106.

Production: ModSum 4-113643 will be installed before delivery on applicable DHC-8 Aircraft Models 401 and 402 at Serial Number 4332 and subsequent.

NOTE: The instructions in this service bulletin are only applicable to the systems and parts installed at the time of delivery on the aircraft or as changed by Bombardier Aerospace Service Bulletin(s). Before you do this bulletin, examine all STC or equivalent action changes to make sure this bulletin can be completed.

Spares Affected:

None B. Reason Problem: Operators of the Q400 aircraft have reported existence of a fouling condition between engine fuel feed line (p/n 82822143) and the feed-through hole in wing rib (p/n 85713381-109) at station Y-157.825 (right side fuel tank).

Other locations have been reported with inadequate clearance between the fuel pipe and structure. In the event of a lightning strike a spark could be produced at the fouling interface between pipe and structure.

Solution: This service bulletin introduces ModSum 4-113643.

The ModSum replaces five existing fuel lines (two in the left wing and three in the right wing and supporting brackets) with new fuel lines and supporting brackets.

The new fuel lines and brackets are designed to include different geometric angles to ensure that when installed correctly contact with a feed-through hole in a rib is eliminated and adequate clearance is maintained. In addition, Teflon tubing is wrapped around one motive flow line and scavenge lines in each fuel tank (left and right side) at specific locations as part of the modification.

SERVICE BULLETIN 84-28-09 S.B. 84-28-09 Page 3 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG C. Description The procedures in this service bulletin give the instructions to do the tasks that follow:

- aircraft is put into standard configuration for maintenance

- aircraft electrical power is removed

- the nose landing gear lock is engaged

- the main landing gear lock pins are installed thru each main gear and main gear door mechanism

- the fuel tanks are drained

- the engines are supported then specific fu el tank access panels (center and outer wing) are removed

- r e s i d u a lf u e li sm o p p e du pa n dt h et a n ki sv e n t e d

- five existing fuel feed tube assemblies, four existing brackets, cushion clamps and related hardware are removed

- new brackets, fuel feed lines are installed and secured using kept hardware

- the reworked ribs in each wing are re-identified with a new part number

- teflon sleeves are installed around a motive fuel line in each outer wing tank

- the new lines are pressure tested

- close out.

D. Compliance Bombardier Inc. highly recommend that ModSum 4-113643 be incorporated at the earliest opportunity unless otherwise directed by the operator’s airworthiness authority.

A Transport Canada Airworthiness Directive Pending.

E. Approval The technical content of this service bulletin has been approved under the authority of the Transport Canada Civil Aviation (TCCA) Design Approval Organization No: DAO #93-Q-02.

This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage Tolerance Inspections (DTIs).

SERVICE BULLETIN 84-28-09 S.B. 84-28-09 Page 4 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG F. Manpower It will take an estimated 35.00 man-hour s to complete this service bulletin. The breakdown of the man-hours is shown in the table that follows:

TASK MAN-HOURS MAN-HOURS TO

RWK LEFT WING

MAN-HOURS TO

RWK RIGHT WING Job Set-Up *2.00 n/a n/a Procedure /Test/ RTS n/a 14.00 15.00 Close-Out **4.00 n/a n/a * time required to defuel and vent fuel tank not included ** cure time for sealant not included.

For any on-site labor assistance, please speak with a Fleet Services representative for a quote. The Fleet Services group can be contacted via the Q Series Technical Help Desk by telephone at 416-375-4000 or email at:

thd.qseries@aero.bombardier.com G. Material - Price and Availability ModSum 4-113754 (Bombardier Service Bulletin 84-28-14) introduces a new tube (part number 82822144-005) through Modification Kit 8MK4498-001, to replace tube 82822144-003, which is part of the 8MK4429-001 kit. To use kit 8MK4429-001, it is required to replace tube part number 82822144-003 with tube part number 82822144-005 obtained from kit 8MK4498-001 (SB 84-28-14).

ModKit 8MK4429-001 is available through the Customer Accounts Service Team at Bombardier Aerospace Regional Aircraft division. Operators should submit a purchase order specifying aircraft serial number(s) to:

Bombardier Aerospace Customer Accounts Services Team (Mail Stop N11-32) 123 Garratt Blvd.

Toronto Ontario Canada M3K-1Y5 Facsimile: (416) 375-3060 Telephone: (416) 375-3920

SERVICE BULLETIN 84-28-09 S.B. 84-28-09 Page 5 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG Kit Number Description 8MK4429-001 Engine Fuel Feed Line - Retrofit Kit H. Tooling - Price and Availability None I. Weight and Balance None J. Electrical Load Data Not affected K. Publications Affected Maintenance Manual PSM 1-84-2................................

Dash 8 Illustrated Parts Catalogue PSM 1-84-4....................

ModSums Manual PSM 1-84-12..................................

L. References Revision ‘D’ of this service bulletin was prepared to the engineering drawings and related data that follows:

DRAWING SHEET REV 8MK4429 1 A 8Z6836 1 A 8Z9209 1 A 8Z9214 1 - ModSum 4Q113643 Rev. ‘D’ ModSum 4-113643 Rev. ‘D’ Bombardier Service Bulletin 84-28-13 (ModSum 4-113745)

SERVICE BULLETIN 84-28-09 S.B. 84-28-09 Page 6 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG Bombardier Service Bulletin 84-28-14 (ModSum 4-113754) Bombardier Service Bulletin 84-28-15 (ModSum 4-113762) PCA 42939 Revision 4 (for internal reference only) Transport Canada Airworthiness Directive Pending.

2. MATERIAL INFORMATION A. Parts Required Per Aircraft ModSum 4-113754 (Bombardier Service Bulletin 84-28-14) introduces a new tube (part number 82822144-005) through Modification Kit 8MK4498-001, to replace tube 82822144-003, which is part of the 8MK4429-001 kit. To use kit 8MK4429-001, it is required to replace tube part number 82822144-003 with tube part number 82822144-005 obtained from kit 8MK4498-001 (SB 84-28-14).

(1) Modification Kit 8MK4429-001, Retrofit Kit - Engine Fuel Feed Line

SERVICE BULLETIN 84-28-09 S.B. 84-28-09 Page 7 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG

(2) Detailed Kit Content:

Quantity Per Kit -001 Part Number Description 4 B0305078-04 Clamp 4 B0305078-10 Clamp 2 DSC411-6-0026 Teflon Hose 4 DSC411-12-032 Teflon Hose 4 B0205016AD5-8S Rivet, Solid 4 B0205016AD5-7S Rivet, Solid 1 85714430-003 Bracket Assy 1 85714428-003 Bracket Assy 1 85714527-001 Bracket Assy 1 85714426-003 Bracket Assy 14 MS29513-214 O-Ring 1 82822144-003 Tube Assy 1 82822143-003 Tube Assy 1 82822142-005 Tube Assy 1 82822140-003 Tube Assy 1 82822139-005 Tube Assy 1 8Z6836 Structural Provision Drawing 1 8Z9209 Retrofit Drawing 1 8Z9214 Retrofit Drawing

SERVICE BULLETIN 84-28-09 S.B. 84-28-09 Page 8 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG B. Parts Required to Modify Spares None C. Special Tools and Equipment Required None D. Existing Parts Accountability The following parts may be affected by this service bulletin. Indented parts are components of the next higher assembly. The quantity (Qty.) column lists the quantity that may be affected per aircraft for non-indented parts and the quantity p e rn e x th i g h e ra s s e m b l yf o ri n d e n t e dp a r t s .

Existing Part Number Description Qty. IC DC New Part Number PNC 82822139-003 Tube Assy Eng Feed (LH side) 1 A SAL 82822139-005 S 82822140-001 Tube Assy Eng Fee (LH side) 1 A SAL 82822140-003 S 82822142-003 Tube Assy Eng Feed (RH side) 1 A SAL 82822142-005 S 82822143-001 Tube Assy Eng Feed (RH side) 1 A SAL 82822143-003 S 82822144-001 Tube Assy Eng Feed (RH side) 1 A SAL 82822144-003 S IC Interchangeability Code A Not interchangeable.

B Removed Part. No direct replacement.

C Conditionally Interchangeable. Inst allation of superseded part negates the intent of this service bulletin.

DC Disposition DIS Discard Part.

MUI Multiple Usage Item: Return to stock if serviceable.

RWK Rework existing part in accordance with this service bulletin.

RWI Rework existing part per .....

SAL Salvage. Return to operator’s stores for salvage consideration.

SERVICE BULLETIN 84-28-09 S.B. 84-28-09 Page 9 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG PNC Part Number Code N No equivalent Bombardier Inc. part number for reworked part. Indicate on part that this service bulletin has been accomplished.

R Part number after rework.

S Superseding or equivalent part number.

X Reworked part and superseding part are functionally and physically equivalent but not identical.

3. ACCOMPLISHMENT INSTRUCTIONS A. Job Set-Up WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE MAIN LANDING GEAR. MAKE SURE YOU ENGAGE THE NOSE GEAR LOCK. IF YOU

DO NOT DO THIS, THE LANDING GEAR CAN ACCIDENTALLY RETRACT. THIS CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.

WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE LANDING GEAR DOORS. MAKE SURE YOU DISCONNECT THE LANDING GEAR DOORS. IF YOU DO NOT DO THIS THE LANDING GEAR DOORS WILL CLOSE WHEN YOU APPLY THE HYDRAULIC PRESSURE. THIS CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.

WARNING: OBEY ALL THE FUEL SAFETY PRECAUTIONS WHEN YOU DO WORK ON THE FUEL SYSTEM AND/OR A FUEL SYSTEM COMPONENT. IF

YOU DO NOT YOU CAN CAUSE INJURIES TO PERSONS AND/OR DAMAGE TO EQUIPMENT.

(1) Make sure that lock pins are installed through each main gear and main gear door mechanism.

(2) Make sure the nose gear ground lock is engaged.

WARNING: YOU MUST REMOVE THE FUEL FROM THE FUEL TANK IN AN OPEN AREA. IF YOU DO NOT DO THIS, YOU CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.

SERVICE BULLETIN 84-28-09 S.B. 84-28-09 Page 10 of 19 22 June 2010 Revision ‘D’ 29 Jan 2013 MG

(3) Refer to AMM TASK 28-10-00-840-801 and prepare fuel tank for access. Make sure no fuel or fuel vapors are present before working on aircraft or in the fuel tanks.

(4) Refer to AMM TASK’ 24-00-00-861-802, TASK 24-00-00-910-801 and placard and select all aircraft electrical power to OFF. Obey all relevant WARNINGS and CAUTIONS.

(5) Set up work platforms and/or ladders to permit access to the fuel tank access panels between wing stations Y-42.000 and Y-317.019 left and right side wing.

Make sure that the work platforms or ladders are electrically grounded.

(6) Refer to AMM TASK 28-00-00-910-801 and make sure to obey the fuel system safety precautions.

(7) Refer to AMM TASK 24-00-00-910-801 and make sure to obey the electrical/electronic safety precautions.

(8) Refer to AMM TASK 24-00-00-910-802 and obey the electrostatic discharge safety precautions.

CAUTION: MAKE SURE THAT THE FUEL TANKS ARE DRAINED BEFORE YOU REMOVE THE ACCESS PANELS. IF YOU DO NOT DO THIS, YOU CAN CAUSE DAMAGE TO THE WING STRUCTURE.

CAUTION: MAKE SURE THAT YOU DO NOT MOVE THE AIRCRAFT BEFORE YOU INSTALL THE FUEL ACCESS PANELS. THIS IS NECESSARY TO PREVENT DAMAGE TO THE WING AND THE WING BOX STRUCTURE.

(9) Refer to Figure 1, the applicable instructions in AMM TASK 57-11-01-000-801 and the table below and remove the left and/or right wing wet bay fuel tank access panels.

ACCESS DESIGNATION 523AT (and/or 623AT right wing) Wet Bay Fuel Access Panels 522BT (and/or 622BT right wing) Wet Bay Fuel Access Panels 522CT (and/or 622CT right wing) Wet Bay Fuel Access Panels

(10) Refer to Figure 1, the applicable instructions in AMM TASK 57-21-01-000-801 and the table below and remove the outer wing fuel tank access panels.

ACCESS DESIGNATION 524AT (and/or 624AT right wing) Outer Wing Fuel Access Panels 524CT (and/or 624CT right wing) Outer Wing Fuel Access Panels