TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f265d1e9c5fef9bdf2a8de582522083f2741175797c10905082f8c1562be6c20' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f265d1e9c5fef9bdf2a8de582522083f2741175797c10905082f8c1562be6c20' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
SERVICE
BULLETIN
30/05/2022 SB 398 Issue 2 Page 1 of 7 Template: DT-DF-028_V2.0 Models Affected Service Bulletin Number All BN2 Series Islander and Trislander Aircraft.
SB 398 Issue 2 – 30/05/2022
RECOMMENDED ACTION TO INSPECT CABLE ROUTING BEHIND THE
INSTRUMENT PANEL FOR INTERFERENCE WITH CONTROL COLUMN This is a highly recommended safety related Service Bulletin. Mandatory Action is expected.
1 COMPLIANCE STATEMENT Compliance is required within the next 100 flying hours of the release of this SB at Issue 2.
Further work is required at Issue 2 of this Service Bulletin due to the introduction of clarification for a “Freedom” or “Full and Free Movement Check” to ensure no further cable interference with the control column.
2 INTRODUCTION Britten-Norman Aircraft have been made aware of instances of cables interference on the control column which has the potential to restrict full and free movement of the flight controls. This Service Bulletin introduces actions to be taken on finding such fouling.
Issue 1 introduced a one-time inspection for interference between the rudder pedal and control column.
Issue 2 clarifies and requires the “Freedom” ('Full and Free Movement Check) to ensure no further interference.
3 APPLICABILITY This Service Bulletin is applicable to all BN2 series Islander and Trislander aircraft.
4 EFFECT ON WEIGHT AND BALANCE None.
5 EFFECT ON PUBLICATIONS The aircraft publications will be amended as necessary by normal revision action. The manuals affected are as follows:- MM/1 – BN2A / BN2B Series MM/2 – Trislander Series
Service Bulletin
SB 398 30/05/2022 Page 2 of 7 Issue 2 Template: DT-DF-028_V2.0 MM/4 – BN2T Series AMP – BN2T-4S Series
A General Aircraft Flight Manual Supplement for the clarification of flight controls 'Freedom' check, effective to all aircraft will also be released. Reference General Supplement 24 , Titled “Supplemental Information For Conduct Of Flying Control Freedom Checks.”
6 INSPECTION Operators are requested to examine behind the instrument panel , between applicable fuselage station numbers (see Table 1 below), to ensure all cables and wiring to the instrument panel and in the surrounding area are routed securely and there is a clearance to allow full and free movement of the flight controls.
Particular attention should be taken to the routing of the Rudder Ped al Adjuster Cable and the Koiled Kord by ensuring the Koiled Kord between the control column and the terminal block is routed and secured clear of the Rudder Pedal Adjuster cable for all positions of the control column and positions of the Rudder Pedal ass embly.
AIRCRAFT TYPE FORWARD FRAME
STATION NUMBER
AFT FRAME
STATION NUMBER
REFERENCE IMAGE BN2A, BN2B, BN2T Series 46 66 Figure 1 BN2T-4S 16 36 Figure 2 Trilander 56.95 76.95 Figure 3 Table 1: Fuselage Station Number s for inspection in Section 7.
Figure 1: BN2A, BN2B, BN2T Series Fuselage Frame Stations
Service Bulletin Vertical Datum STA 0.O -48.25 -11.0 16.0 41.5
47.0 79.0 &
81.55 BN2T-4S Figure 2: BN2T-4S Fuselage Frame Stations Vertical Datum STA O.0 29.95 76.95 122.85
56.95 87.95
6.5 43.45 82.45 104.4 125.4 Trilander Figure 3: Trilander Fuselage Frame Stations 7 ACTION
1) Check for evidence of interference between the control column, the rudder pedal adjuster cable and any wiring (including the Koiled cord) whilst performing a control column "Freedom" (Full and Free Movement) check. For a control column "Freedom" (Full and Free Movement) check procedure, refer to Para 8.
30/05/2022 SB 398 Issue 2 Page 3 of 7
Service Bulletin
SB 398 30/05/2022 Page 4 of 7 Issue 2 Template: DT-DF-028_V2.0
2) If evidence of interference is found during the check then the cables must be securely tied clear of the control column for its full range of motion.
3) In the event that inspections result in evidence of interference, ensure the contacting parts are defect free prior to securing.
4) Perform a final control column “Freedom” (Full and Free Movement) check as detailed in Para 8 to ensure no freeplay, friction, binding, non-linear forces and any possible mutual interference.
8 FLYING CONTROLS FULL-AND-FREE MOVEMENT CHECKS The Islander Flight Manual requires a “Freedom” (Full and Free Movement) check of the flying controls to be verified as part of the pre -take-off checks. This requires the controls to be exercised to extremes of deflection in all axes concurrently. This should be achieved as follows:
1) Full left rudder.
2) Control column fully forward and control wheel fully left/anti-clockwise.
3) Wheel held and control column moved fully aft.
4) Control column held and control wheel fully right/clockwise.
5) Wheel held and control column fully forward.
6) Flying controls neutral.
7) Full right rudder.
8) Repeat steps 2-5 in opposite direction (i.e. control wheel fully right/clockwise first).
9) Flying controls neutral.
Note: during the control inputs any freeplay, friction, binding, non-linear forces and any possible mutual interference should be carefully investigated. Aileron movement should be visually assessed to ensure full travel in the correct sense. Any abnormal results must be fully investigated and resolved before flight.
9 MANPOWER This procedure will take between 1 and 4 hours to complete.
10 PROVISIONING Service Bulletin SB 398 can be obtained from Britten-Norman Customer Services Department , Britten-Norman, Bembridge Airport, Isle of Wight, PO35 5PR, United Kingdom.
For more information, contact the Customer Support Department at Britten-Norman:
• Post: Britten-Norman, Bembridge Airport, Isle of Wight. PO35 5PR United Kingdom
• Telephone: +44 (0) 20 3371 4000
• Facsimile: +44 (0) 20 3371 4001
• E-mail: customer.support@britten-norman.com
Service Bulletin
30/05/2022 SB 398 Issue 2 Page 5 of 7 11 FOLLOW ON ACTION Make an entry in the aircraft log book, and all other related maintenance documentation, that SB 398 Issue 2 has been completed.
If any interference is found du ring the inspection outlined in Section 7 of this document, operators are required to complete the operator feedback form at Appendix A and return it to Britten -Norman Customer Support using the contact details given above.
12 APPROVAL The technical content of this document is approved under the authority of the DOA ref. UK.21J.0138.
Signed: .............................................................................................................
Date: .................................................................................................................
30/05/2022
Service Bulletin
SB 398 30/05/2022 Page 6 of 7 Issue 2 Template: DT-DF-028_V2.0 13 APPENDIX A – OPERATOR FEEDBACK
OPERATOR DETAILS Company Name
Contact Person
Contact address
Telephone Number
Email Address
AIRCRAFT DETAILS Model/Type Registration Number
Constructor Number
Total flying Hours
Total landings
Service Bulletin
30/05/2022 SB 398 Issue 2 Page 7 of 7 Please record below the details of the cable interference found during the inspection described in Section 7 of SB 398. A separate form should be filled out for each aircraft owned by the operator.
Details of cable interference including affected part numbers: