Copy · CFM56-5B SB 72-1074-R01 · 7 pages

© CFM International. Filed by the FAA in regulations.gov docket FAA-2019-0212, the docket of AD 2019-12-05. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'edb083a7ee43380ada243eb9b3272041cdb2b799830772df49de911a41ce899a'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N 1795M36P01 and P/N 1795M36P02

CFM PROPRIETARY INFORMATION The information contained in this document is CFM proprietary information and is disclosed in con fi- dence. It is the property of CFM and shall not be used, disclosed to others or reproduced without the express written consent of CFM, including, but wit hout limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modi fications, spare parts, design, or con figuration changes or to obtain FAA or any other government or regulatory approval to do so. If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in w hole or in part. The information contained in this document may also be controlled by U.S. export control laws. Unauthorized export or re-export is prohibited.

All technical documentation and information contained herein, with respect to assembly and disassembly, cleaning, inspection methods and limits, r epair methods and limits, operational limits, life limits and the like, have been developed and approved for use with engines and parts that have been manufactured and/or approved by CFM and that have been maintained in accordance with CFM technical documentation and recommendations. CFM has no contractual or legal obligation for, nor knowledge of, non-CFM-approved parts and repairs . Accordingly, this document is not intended to apply to non-CFM-approved parts and repairs.

July 27, 2018 CFM56-5B S/B 72-1074 Revision 01, December 05, 2018 PAGE 1 of 7

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N 1795M36P01 and P/N 1795M36P02

TRANSMITTAL INFORMATION REVISION 1 TO SERVICE BULLETIN 72-1074 Revision 1 is issued to update the Service Bulletin title and paragraphs 1., P LANNING INFORMATION,2 . ,M ATERIAL INFORMATION, and 3., A CCOMPLISHMENT INSTRUCTIONS.

The original was issued July 27, 2018. Revision bars in the left margin identify changes.

1. PLANNING INFORMATION A. Effectivity CFM56-5B1, -5B2, -5B4, -5B5, -5B6, -5B7 CFM56-5B1/P , -5B2/P , -5B3/P , -5B4/P , -5B5/P , -5B6/P , -5B7/P , -5B8/P , -5B9/P CFM56-5B3/P1, -5B4/P1 CFM56-5B1/2P , -5B2/2P , -5B3/2P , -5B4/2P , -5B6/2P , -5B9/2P CFM56-5B3/2P1, -5B4/2P1 The rotating air high pressure turbine (HPT) front seals (seals) P/N 1795M36P01 and P/N 1795M36P02 that have the following serial numbers: GWNDN949 through GWNSE969, and GWN000CE through GWN0990L (except serial numbers:

GWN08ND7, GWN0923A, GWN0971E, GWN098A1, GWN098W6, GWN098W8, GWN098WA, and GWN0990G), and that have been removed from their original HPT disk in the field and re-assembled to a second HPT disk with a different serial number, are affected by this Service Bulletin.

B. Description This Service Bulletin provides the removal timing for the seals P/N 1795M36P01 and P/N 1795M36P02 with the serial numbers listed in paragraph 1.A., E ffectivity.

Refer to Figure 1.

C. Compliance Category 2 CFM recommends that you do this Service Bulletin before 6,500 cycles since a s s e m b l e dt oas e c o n dH P Td i s k ,i ft h es e a lw a sr e - a s s e m b l e dt oas e c o n dH P T disk with a different serial number. If t he condition has exceeded the 6,500 cycles since assembled to the second HPT disk, then replace the seal before 500 cycles or within three months from the original issue date, whichever comes sooner.

NOTE 1: For the seal P/N 1795M36P01, if the condition has exceeded the 6,500 cycles since assembled to a second HPT disk, replace the seal before 250 cycles or within three months from the revision 1 issue date, whichever comes sooner.

July 27, 2018 CFM56-5B S/B 72-1074 Revision 01, December 05, 2018 PAGE 2 CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or first page.

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N 1795M36P01 and P/N 1795M36P02 NOTE 2: For the seals that have exceeded the 6,500-cycle threshold, the removals should be prioritized based on the cycles since the installation to the second HPT disk.

Impact A This recommendation is to address a condition that may affect Flight Safety.

NOTE 3: This Service Bulletin can be accomplished in shop.

This Service Bulletin is offered to improve the reliability or performance of your CFM product, or to help prevent the occurrence of the event or condition described in this Service Bulletin. If the operator elects not to participate in the bulletin, that decision will be taken into consideration by CFM in evaluating future product performance issues that may arise in the operator’s fleet.

D. Concurrent Requirements None.

E. Reason

(1) Objective:

Replacement of the seal.

(2) Condition:

The seal may have a condition, generated during manufacturing, that could affect the life of the seal if re-installed to a second HPT disk within the operating life of the seal.

(3) Cause:

The affected seals have geometry variations on the air slot breakedges, which can make the seal more sensitive to loading variations when assembled to a second HPT disk.

(4) Improvement:

None.

(5) Substantiation:

Substantiation is by analysis and fleet experience.

F. Approval The technical content of this Service Bulletin is approved by the FAA and under the Authority of DOA No. EASA.21J.086.

July 27, 2018 CFM56-5B S/B 72-1074 Revision 01, December 05, 2018 PAGE 3 CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or first page.

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N 1795M36P01 and P/N 1795M36P02 G. Manpower No additional man-hours are required to comply with this Service Bulletin.

H. Weight and Balance Weight and balance are not changed.

I. References (Use the latest version of these documents) CFM56 Standard Practices Manual (SPM), CFMI-TP-SP .2 CFM56-5B Engine Shop Manual (ESM), CFMI-TP .SM.9 CFM56-5B Illustrated Parts Catalog (IPC), CFMI-TP .PC.12 J. Publications Affected None.

K. Interchangeability The physical and functional interchangeabilities are not affected.

L. Software Accomplishment Summary Not applicable.

2. MATERIAL INFORMATION A. Material - Price and Availability

(1) Parts necessary to do this Service Bulletin:

Part Number Qty/ Eng Part Name Unit ($) Price Pkg Qty Lead Time Days 1795M36P02 (1) Seal, Rotating Air HPT Front 344,600.00 (1) 5 NOTE: Prices are provided for planning purposes and are subject to change.

(2) Other Spare Parts:

None.

(3) Consumables:

None.

July 27, 2018 CFM56-5B S/B 72-1074 Revision 01, December 05, 2018 PAGE 4 CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or first page.

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N 1795M36P01 and P/N 1795M36P02 B. Industry Support Information Contact your Customer Support Manager (CSM).

C. Configuration Chart None.

D. Parts Disposition Return old parts to:

The seals P/N 1795M36P01 and P/N 1795M36P02, removed to accomplish this Service Bulletin, must be sent to the following address via the Service Request system:

GE Aviation Crescent Park Distribution Centers Inc Attn: FOS Field Program Return 5443 Duff Drive West Chester, Ohio, USA 45246 Report the seal and engine information to CFM Customer Support Center or Fleet Support:

CFM SA ZONE CFM Inc. Zone Customer Support Center:

http://mycfmportal.com Widget AskCFM OR E-mail: cfm.csc@safrangroup.com OR

PSE CFM SAFRAN Aircraft Engines Site de MELUN MONTEREAU BP 1936 - 77019 Melun Cedex FRANCE OR Phone: +33 1 64 14 88 66 F a x : + 3 316 41 48 76 5 GE Aviation Fleet Support:

http://www.geaviation.com/support OR E-mail (USA): aviation. fleetsupport@ge.com E-mail (China and Asia): aviation. fleetsupport.cn@ge.com OR GE Aviation M/D Rm. 285 One Neumann Way OH 45215 USA OR USA Phone: 877-432-3272 International Phone: (513) 552-3272 China and Asia Phone: +86 21 38777666 July 27, 2018 CFM56-5B S/B 72-1074 Revision 01, December 05, 2018 PAGE 5 CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or first page.

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N 1795M36P01 and P/N 1795M36P02 E. Tooling - Price and Availability None.

3. ACCOMPLISHMENT INSTRUCTIONS A. General

(1) Remove the suspect seal (Figure 1). Removal instructions have not changed.

Refer to the CFM56-5B ESM, 72-52-00, DISASSEMBLY .

(2) Write the word SCRAP close to the P/N and S/N markings. You can use any method of permanent marking speci fied in the CFM56 SPM, 70-10-00. Return the removed seal (Figure 1) to CFM at the address speci fied in paragraph

2.D., P arts Disposition and do as follows:

(a) Do a visual inspection of the seal (Figure 1) for cracks before you return it to CFM. If there are cracks, notify CFM and also return the associated HPT disk to CFM.

(3) Install the replacement seal (Figure 1). Installation instructions have not changed. Refer to the CFM56-5B ESM, 72-52-00, ASSEMBLY 001.

July 27, 2018 CFM56-5B S/B 72-1074 Revision 01, December 05, 2018 PAGE 6 CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or first page.

Page 7OCROpen in PDF

cim SERVICE

BULLETIN THE POWER CFM56-5B ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N 1795M36P01 and P/N 1795M36P02 VIEW A SEAL

HPT DISK REAR ' SHAFT

FRONT SHAFT DAMPER SLEEVE 398888888

FORWARD VIEW B SEAL

FORWARD 5057591-01 Seal Location Figure 1 July 27, 2018 CFM56-5B S/B 72-1074 Revision 01, December 05, 2018 PAGE 7 CEM PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.