TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '37f641b05898df0f45ef7801dfee05e58ddcb6b73abf0a194495e2bf181f5e9f' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '37f641b05898df0f45ef7801dfee05e58ddcb6b73abf0a194495e2bf181f5e9f' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Page 1 / 12JUL 22 Rev. X - DAT XX This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
REVISION 1 SUBJECT: EMERGENCY EXIT DOOR OPENING REFERENCE DOCUMENT:
Modification No. MOD70-0793-25 Version A, B or C EFFECTIVITY: TBM aircraft S/N 434 to 1424 except S/N 1408 and 1420 /C0111 TBM 700 /C0111 TBM 700 G1000 /C0111 TBM 850 CFD /C0084 TBM 850 AFD /C0084 TBM 900 /C0084 TBM 910 /C0084 TBM 930 /C0084 TBM 940 /C0084 TBM 960 NOTE:
If an aircraft listed in the effectivity has an embodied modification or repair that is not of Daher Aerospace origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for an adaptation necessary before incorporation of the Service Bulletin.
REASON:
A. PROBLEM Interference between emergency exit door panel and upholstery panel, which may require additional effort to open the emergency exit door.
B. REASON Insufficient clearance between the two panels.
C. SOLUTION Emergency exit door panel modification to ease emergency door opening.
SUMMARY:
A. PRELIMINARY STEPS B. PROCEDURE C. FINAL STEPS APPLICATION:
At the earliest opportunity / inspection, at the latest, before 1 year and 1 month after SB issuance reference.
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD SB 70-304 REVISION 1 25 ATA No.
Daher Aerospace Customer Support Airplane Business Unit Phone: 33 (0)5 62.41.73.00 65921 Tarbes Cedex 9 tbmcare@daher .com France
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD SB 70-304 REVISION 1 25 ATA No.
Page 2 / 12JUL 22 Rev. X - DAT XX This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
WARRANTY:
Parts and manhours will be covered under warranty (1). This campaign will end 1 year and 1 month after the SB issuance reference date.
(1) Only if applied within the TBM Service Network (The List of TBM Service Network is available on website www.tbm.aero).
OPERATIONAL CONSEQUENCES / TRAINING:
Not applicable MAINTENANCE CONSEQUENCES:
No changes to the scheduled maintenance PROCURABLE MATERIAL:
- Parts to be ordered from your TBM spare parts distributor.
Item Figure Part Number Description Qty/aircraft 12/13/21 2 / 3 T700G252006500100 Strap assy 1 NOTE:
Part Numbers given in this Service Bulletin could be amended between the time of approval of the SB and the delivery of the kit without impact on this Service Bulletin approval or for the operators. If the part numbers change, Daher Aerospace will inform operators through an update of the SB. Operators must contact their TBM spare parts distributor for any question.
CONSUMABLE MATERIAL or OTHER PRODUCTS (Local purchase):
- Self-gripping strap SJ3527 or equivalent TOOLS:
- Standard aeronautical maintenance station tools AFFECTED PUBLICATIONS: (Documents updated in relation to this SB distribution) IPC Chapters:
- 25-21-01
- 25-21-02 AMM Chapters:
- 25-21-02
- 52-20-00 CMM: Not applicable POH: Not impacted
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD SB 70-304 REVISION 1 25 ATA No.
Page 3 / 12JUL 22 Rev. X - DAT XX This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
RELATED DOCUMENTS: (Documents necessary to apply procedure described hereafter) AMM Chapters:
- 25-21-02
- 52-20-00 ASSOCIATED DOCUMENTS:
- None MANPOWER:
- 1 aeronautical mechanic: 1 hour NOTE:
The manpower estimates given in this Service Bulletin assume that the work will be done by Service Centers having multiple aircraft with experienced personnel.
TECHNICAL INCIDENCES:
- Weight: Negligible
- Arm: Negligible
- Electrical consumption: Not applicable PARTS TO BE RE-IDENTIFIED:
YES /C0084 NO /C0111 Emergency Exit trim panel (11) Reference Pre-SB70-304-25 Reference Post-SB70-304-25 Aircraft Pre-MOD70-0628-25 T700G2520060000 T700G2520060001 Aircraft Post-MOD70-0628-25 T700G2520230000 T700G2520230002 Aircraft Post-MOD70-0783-25 SIA005B-0004-XXX (1) SIA005B-0070-XXX (1)
(1) XXX value is kept from the previous reference to the new one (corresponding to upholstery panel harmony).
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD SB 70-304 REVISION 1 25 ATA No.
Page 4 / 12JUL 22 Rev. X - DAT XX This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
DESCRIPTION OF ACCOMPLISHMENT INSTRUCTIONS :
WARNING
MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND CAUTIONS INCLUDED IN THE REFERENCED PROCEDURES.
NOTE:
Operations required in this Service Bulletin must be accomplished by persons authorized by their Airworthiness Authorities and according to the procedure described hereafter.
A. PRELIMINARY STEPS - See Figure 2
1) Make sure the “SOURCE” selector is set to “OFF” and the crash lever is down.
2) Install the warning sign prohibiting “SOURCE” selector operation
WARNING DO NOT OPERATE:
MAINTENANCE WORK IN PROGRESS.
3) Remove emergency exit trim panel (11) - refer to Chapter 25-21-02 of the Maintenance Manual.
B. PROCEDURE
CAUTION
DEGREASE ALL AREAS WHERE SELF-GRIPPING ARE TO BE INSTALED.
Aircraft up to S/N 1407 - See Figures 1, 2, 3 and 4
1) Using any appropriate means, cut, remove and discard the upper part of the 247R panel self-gripping strap (2) - See Figure 1, area to be modified (3) for dimensions.
2) From the strap that has been ordered (P/N T700G252006500100), remove the self-gripping straps (12) and (13).
3) On emergency exit trim panel (11) apply the self-gripping strap (12) - See Figure 2 for location.
CAUTION
ON SEVERAL AIRCRAFT , AN ADDITIONAL SPECIFIC LANGUAGE PLACARD IS
PRESENT BELOW THE ENGLISH ONE ON THE UPPER PART OF THE HANDLE
(14) AND COULD BE MASKED BY THE NEW STRAP (21).
SO, THIS SPECIFIC PLACARD MUST BE MOVED ON THE LOWER PART OF THE HANDLE (14) IN ORDER TO ENSURE ITS VISIBILITY .
4) On handle (14) apply the self-gripping strap (13) - See Figure 2 for location.
NOTE:
It can be necessary to reduce the self-gripping strap (13) width in accordance with the handle (14) upper part geometry.
5) Using self-gripping straps (12), install strap (21) on emergency exit trim panel (11)
- See Figure 3.
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD SB 70-304 REVISION 1 25 ATA No.
Page 5 / 12JUL 22 Rev. X - DAT XX This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
6) Remove and discard screw (33), washer (32) and clip (31).
7) In the panel identification area (35), see Figure 4, re-identify emergency exit trim panel (11) - see Paragraph “PARTS TO BE RE-IDENTIFIED” for reference.
Aircraft from S/N 1409 to 1424 except 1420 - See Figures 1A, 2A, 3 and 4
1) Using any appropriate means, cut, remove and discard the two upper parts of the 247R panel self-gripping strap (2) - See Figure 1A, area to be modified (3) for dimensions.
2) From the strap that has been ordered (P/N T700G252006500100), remove the self-gripping straps (12) and (13).
3) In order to install the two self-gripping straps (12), remove two areas in insulating panel (17) - See Figure 2A, item 16 for dimensions.
4) On emergency exit trim panel (11) apply the self-gripping strap (12) - See Figure 2A for location.
5) On handle (14) apply the self-gripping strap (13) - See Figure 2A for location.
6) Using self-gripping straps (12), install strap (21) on emergency exit trim panel (11)
- See Figure 3.
7) In the panel identification area (35), see Figure 4, re-identify emergency exit trim panel (11) - see Paragraph “PARTS TO BE RE-IDENTIFIED" for reference.
C. FINAL STEPS - See Figures 3 and 4 Aircraft up to S/N 1407
CAUTION
ENSURE AN IDENTICAL CLEARANCE (34) ALL AROUND THE EMERGENCY EXIT TRIM PANEL (11).
IN ORDER TO CREATE A SUFFICIANT CLEARANCE ON THE UPPER PART OF THE EMERGENCY EXIT TRIM PANEL (11), IT CAN BE NECESSARY TO INCREASE THE DIAMETER (MAXIMUM DIAMETER 0.6 IN) OF THE TWO PANEL POSITIONING HOLES (23).
Aircraft S/N 1409 to 1424 except 1420
CAUTION
ENSURE AN IDENTICAL CLEARANCE (34) ALL AROUND THE EMERGENCY EXIT TRIM PANEL (11).
All
1) Install emergency trim panel - Refer to Chapter 25-21-02 of the Maintenance Manual.
CAUTION
IN THE CONTEXT OF THIS SERVICE BULLETIN, IT IS NOT NECESSARY TO PERFORM THE WATER TIGHTNESS TEST .
2) Perform a check of emergency exit - refer to Chapter 52-20-00 of the Maintenance Manual.
NOTE:
To perform the check of emergency exit, make sure that upholstery panel 247R (1) and emergency trim panel (11) are installed.
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD SB 70-304 REVISION 1 25 ATA No.
Page 6 / 12JUL 22 Rev. X - DAT XX This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
3) Make sure all the tools and materials are removed and the work area is clean and free from debris.
UPDATING OF THE AIRCRAFT DOCUMENTATION:
Aircraft not equipped with MOD70-0502-52 “Emergency exit - design modification” Upon completion of Service Bulletin No. SB70-304-25 “EMERGENCY EXIT DOOR OPENING” (Reference MOD70-0793-25 Version B), make an appropriate maintenance record entry.
Aircraft equipped with MOD70-0502-52 “Emergency exit - design modification” Upon completion of Service Bulletin No. SB70-304-25 “EMERGENCY EXIT DOOR OPENING” (Reference MOD70-0793-25 Version A), make an appropriate maintenance record entry.
Aircraft equipped with MOD70-0783-25 “Upholstery panels 2022” Upon completion of Service Bulletin No. SB70-304-25 “EMERGENCY EXIT DOOR OPENING” (Reference MOD70-0793-25 Version C), make an appropriate maintenance record entry.
WARNING: DAHER AEROSPACE considers that it is MANDATORY for operators to comply with the instructions of this SB.
Operators who arbitrarily ignore the compliance statement indicated in this SB do so at their own risk.
TBM AIRCRAFT SERVICE BULLETIN SB 70-304 25 ATA No.
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD 1 - Upholstery panel 247R 2 - Self-gripping strap 3 - Area to be modified BEFORE SB70-304-25 FWD AFTER SB70-304-25 FWD C4252100AAAEMA4600
20.9 in
24.8 in Figure 1 - Upholstery panel 247R modification - Aircraft S/N 434 to 1407 JUL 22 Page 7 / 12 This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
TBM AIRCRAFT SERVICE BULLETIN SB 70-304 25 ATA No.
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD 1 - Upholstery panel 247R 2 - Self-gripping strap 3 - Area to be modified FWD BEFORE SB70-304-25 FWD AFTER SB70-304-25 24252100A A AGMA4600 Figure 1A - Upholstery panel 247R modification - Aircraft S/N 1409 to 1424 except 1420 JUL 22 Page 8 / 12 This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
TBM AIRCRAFT SERVICE BULLETIN SB 70-304 25 ATA No.
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD 11 - Emergency Exit trim panel 12 - Self-gripping strap 13 - Self-gripping strap 14 - Handle C10 15 - Emergency exit door C8 FWD
2.56 in
1.18 in 1.18 in 12 NEWD 15 C4252100AAAEMA14600 13 14 Figure 2 - Self-gripping strap installation - Aircraft S/N 434 to 1407 JUL 22 Page 9 / 12 This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD SB 70-304 REVISION 1 25 ATA No.
Page 10 / 12JUL 22 Rev. X - DAT XX This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
Figure 2A - Self-gripping strap installation - Aircraft S/N 1409 to 1424 except 1420 11 - Emergency Exit trim panel 12 - Self-gripping strap 13 - Self-gripping strap 14 - Handle 15 - Emergency exit door 16 - Area to be cut (insulating panel)
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD SB 70-304 REVISION 1 25 ATA No.
Page 11 / 12JUL 22 Rev. X - DAT XX This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
Figure 3 - Strap installation 1 - Upholstery panel 247R 11 - Emergency exit trim panel 12 - Self-gripping strap 13 - Self-gripping strap 14 - Handle 21 - Strap 22 - Self-gripping strap 23 - Panel positioning holes (up to S/N 1407)
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY The technical content of this document is approved under the authority of the DOA ref EASA.21J.013 and is the subject to an AD SB 70-304 REVISION 1 25 ATA No.
Page 12 / 12JUL 22 Rev. X - DAT XX This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
Figure 4 - Emergency exit trim panel modification / installation 1 - Upholstery panel 247R 11 - Emergency exit trim panel 22 - Self-gripping strap 23 - Panel positioning holes (up to S/N 1407) 31 - Clip 32 - Washer 33 - Screw 34 - Clearance 35 - Panel identification area