TextOCR
This text is OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'acd3c387c5efd3f40927a2c65fb47b0c2e475583a820f38317397331078013f1' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'acd3c387c5efd3f40927a2c65fb47b0c2e475583a820f38317397331078013f1' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Diamond Diamond Aircraft Industries GmbH WI-MSB 42NG-077 AIRCRAFT Nikolaus-August-Otto-Straße 5 Revision O 2700 Wiener Neustadt, Austria Page 1 of 3 20-Aug-2018
WORK INSTRUCTION WI-MSB 42NG-077
GENERAL INFORMATION Subject Removal of pilot gust lock mounts from rudder pedals on pilot side.
1.2 Reference Documents issue. Diamond Aircraft DA 42 NG Airplane Maintenance Manual, Doc. No. 7.02.15, latest effective
1.3 Remarks
a) All work must be done by a certified aircraft service station or a certified aircraft maintenance mechanic.
b) All work, in particular if not described in this work instruction, must be done in accordance with the referenced maintenance manual.
c) For conversion factors between SI units and US/Imperial units refer to AMM Chapter 02.
d) In case of doubt, contact Diamond Aircraft Industries GmbH.
II DRAWINGS, SPECIAL TOOLS & MATERIALS
l.1 Drawings None.
11.2 Special Tools None.
Diamond Diamond Aircraft Industries GmbH WI-MSB 42NG-077 AIRCRAFT Nikolaus-August-Otto-Straße 5 Revision 0 2700 Wiener Neustadt, Austria Page 2 of 3 20-Aug-2018 I1.3 Material Quantity Part Number Description 2 MS 171532 Pin-Spring Material is available from Diamond Aircraft Industries.
III INSTRUCTIONS 1 Position the pilot electrical or mechanical rudder pedal full rearward.
2 Remove the spring pin from the LH and RH Pilot rudder pedal with a 3mm punch with a centering pin (see picture 1). Make sure that the spring pin does not collide with the Picture 1
›Diamond Diamond Aircraft Industries GmbH WI-MSB 42NG-077 AIRCRAFT Nikolaus-August-Otto-Straße 5 Revision 0 2700 Wiener Neustadt, Austria Page 3 of 3 20-Aug-2018 Picture 2 Remove the gust lock mounts from the rudder pedals.
4 Install the new spring pins into the LH and RH Pilot rudder pedal.
5 Prepare the gust lock belt i.a.w. picture 3 for use on the Co-Pilot rudder pedals.
Note: the gust lock mounts on the Co-Pilot rudder pedals are already installed. Refer also to the Airplane Flight Manual Temporary Revision TR-MAM 42-1097.
REMOVE BEFORE FLIGHT 70cm (27.56in) Band length 6 Incorporate TR-MAM 42-1097 into the Airplane Flight Manual according to instructions given on the cover sheet of the TR-MAM 42-1097.
7 Make all necessary entries in the airplane logs.