Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '935be1bc4f74d2b324d6dc16c8dcba547cfda3f5fc1fae204d80de68fcfd17bd' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '935be1bc4f74d2b324d6dc16c8dcba547cfda3f5fc1fae204d80de68fcfd17bd' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Diamond Aircraft Industries GmbH N. A. Otto-Straße 5 2700 Wiener Neustadt, Austria DAI MSB 42-129 Page 1 of 5 17-May-2017
MANDATORY SERVICE BULLETIN MSB 42-129
I TECHNICAL DETAILS I.1 Category Mandatory.
I.2 Airplanes affected Type: DA 42, DA 42 M Serial numbers: 42.004 through 42.427
42.AC001 through 42.AC151
42.M001 through 42.M027 Only airplanes with a TAE 125-02-99 or TAE 125-02-114 engine with exhaust pipe DAI P/N D60-9078-06-01_01 / Technify P/N 52-7810-H0014 01 installed are affected.
I.3 Date of effectivity 17-May-2017 I.4 Time of Compliance For exhaust pipes
- with more than 40 hours TSN (time since new) at the date of effectivity: within next 10 flight hours and every 50 flight hours thereafter,
- with less than 40 hours TSN at the date of effectivity: before exceeding 50 flight hours and every 50 flight hours thereafter.
I.5 Subject Inspection of exhaust pipe.
ATA-Code: 78-00 I.6 Reason An exhaust pipe without a directly attached integral heat shield was developed allowing visual inspection over the entire exhaust pipe length (refer also to DAI OSB 42-122). Heat shielding is provided through patches and shields in the cowling. Diamond Aircraft received reports about cracked exhaust pipes which if not detected can cause loss of the exhaust pipe.
This Service Bulletin prescribes inspection of the exhaust pipe to identify possible cracks and to replace the exhaust pipe in case cracks are found.
Diamond Aircraft Industries GmbH N. A. Otto-Straße 5 2700 Wiener Neustadt, Austria DAI MSB 42-129 Page 2 of 5 17-May-2017
I.7 Concurrent Documents None.
I.8 Approval The technical information or instructions contained in this document relate to the Design Change Advisories No. MÄM 42-911 and OÄM 42-252/d, which have been approved under the authority of EASA Design Organization Approval ref. EASA.21J.052.
The technical content of this document has been approved under the authority of DOA ref.
EASA.21J.052.
I.9 Accomplishments / Instructions
1. Remove engine cowling for engine installations with affected exhaust P/N installed
i.a.w. AMM section 71-10.
2. Inspect exhaust pipe circumferentially in marked area for cracks.
3. If cracks are found replace exhaust pipe or one time repair as follows:
Cracks up to 50 mm (2 inch) in axial direction may be one time weld-repaired: TIG welding using 1.4842 filler material and staff qualified according to ISO 24394.
No re-welding of the manifold joint is allowed.
NOTE: Weld repaired exhaust pipes remain subject to the recurring inspection.
Diamond Aircraft Industries GmbH N. A. Otto-Straße 5 2700 Wiener Neustadt, Austria DAI MSB 42-129 Page 3 of 5 17-May-2017
NOTE: Following types of cracks are
acceptable for repair,
NOT acceptable for repair.
The dot-dashed line indicates position & orientation of the crack.
Diamond Aircraft Industries GmbH N. A. Otto-Straße 5 2700 Wiener Neustadt, Austria DAI MSB 42-129 Page 4 of 5 17-May-2017
4. Clean working areas, check for foreign objects.
5. Check all altered, replaced, repaired parts for proper function.
6. Test all systems in working area for function.
7. Install engine cowlings i.a.w. AMM section 71-10.
8. Make all necessary entries in the airplane logs.
I.10 Mass (Weight) and CG The change in mass and CG is negligible.
II PLANNING INFORMATION II.1 Material and Availability Materials are available from Technify Motors.
II.2 Special Tools None.
II.3 Labour Effort Approx. 0.5 hours for inspection.
II.4 Credit None.
II.5 Reference Documents DA 42 Series Airplane Maintenance Manual, Doc. No. 7.02.01, latest effective issue.
III REMARKS
1. All work must be done by a certified aircraft service station or a certified aircraft maintenance mechanic.
2. All work, particular that which is not especially described in this Service Bulletin, must be done in accordance with the referenced Maintenance Manual.
3. Completion of all work must be recorded in the log book.
4. In case of doubt contact Diamond Aircraft Industries GmbH.
Diamond Aircraft Industries GmbH N. A. Otto-Straße 5 2700 Wiener Neustadt, Austria DAI MSB 42-129 Page 5 of 5 17-May-2017
EXECUTION REPORT TO
SERVICE BULLETIN MSB 42-129
AIRPLANE INFORMATION Airplane Serial Number _________________ Airplane Registration _________________ Airplane Operator _________________ Hours of operation of airplane _________________ No. of landings _________________ Hours of operation-engine _________________ Typical operation of airplane private, club, training, other ______________
Cracks found on exhaust: no □ yes □ Weld repair carried out: no □ yes □
__________________________________ Date, Name, Sign
Please e-mail the completed form executionreports@diamond-air.at