Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7e240ffbfd3a8ad6bc627089d25f8e1e5e03afec74b401a029e03ab0c2ad43cc' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7e240ffbfd3a8ad6bc627089d25f8e1e5e03afec74b401a029e03ab0c2ad43cc' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
WINGS - MAIN LANDING GEAR SIDE STAY BUSHING - REPLACEMENT
1. PLANNING INFORMATION A. SB EFFECTIVITY Aircraft affected:
MODEL SN EMBRAER 190 ECJ 19000109, 19000140, 19000159, 19000177, 19000203, 19000225, 19000236, 19000243, 19000261, and 19000296.
In-production effectivity:
EMBRAER 190 ECJ model aircraft SN 19000278, 19000307, 19000317 and on have an equivalent modification factory-incorporated.
B. CONCURRENT REQUIREMENTS The accomplishment of Service Bulletin 190LIN-32-0017 original Issue, or a subsequent approved revision is required in conjunction with the accomplishment of PART II and/or PART III of this Service Bulletin.
C. REASON
(1) HISTORY Instances have been reported concerning the migration of the outer bushing of the side stay support fitting on the left-hand and right-hand Main Landing Gear (MLG).
The migration of the outer bushing may cause inefficient lubrication of the support fitting. In extreme cases of bushing migration, cracks on the Main Landing Gear (MLG) Side Stay Support Assembly may occur.
SERVICE BULLETIN DATE: 10/Jun/2011 REVISION No.:
SB No.: 190LIN-57-0016 PAGE: 1 of 44 Copyright © 2011 by Embraer S.A. All rights reserved.
(2) OBJECTIVE To provide instructions to replace the current outer bushing of the Main Landing Gear (MLG) side stay support fitting with new flanged one plus support spacers. Also, to provide instructions to replace the current inner bushing.
(3) EXPECTED BENEFITS This modification is aimed at ensuring proper lubrication of the Main Landing Gear (MLG) side stay support fitting.
(4) REVISION HISTORY None.
D. DESCRIPTION This Bulletin is divided into 03 PARTS, as follows:
PART I INSPECTION FOR MIGRATION OF THE OUTER BUSHING OF THE LHAND RH MAIN LANDING GEAR SIDE STAY SUPPORT FITTING Applicable to: Refer to 1.A. SB EFFECTIVITY aircraft.
PART I of this bulletin consists in measuring the axial migration of the outer bushing from its housing on the side stay support fitting of the left-hand and right-hand Main Landing Gear (MLG).
To do this, it is necessary to gain access to the side stay support fitting of the left-hand and right-hand Main Landing Gear (MLG).
PART II REPLACEMENT OF THE OUTER / INNER BUSHING OF THE LH MAINLANDING GEAR SIDE STAY SUPPORT FITTING Applicable to: Refer to 1.A. SB EFFECTIVITY aircraft.
The modification presented in PART II of this bulletin consists in replacing the current outer bushing of the LH Main Landing Gear (MLG) side stay support fitting with a new flanged one made from beryllium-copper and support spacers installation. Therefore, the current inner bushing of the LH Main Landing Gear (MLG) side stay support fitting must be replaced also.
SERVICE BULLETIN SB No.: 190LIN-57-0016 PAGE: 2 DATE: 10/Jun/2011 REVISION No.:
Copyright © 2011 by Embraer S.A. All rights reserved.
To do this, it is necessary to remove the support assembly of the left-hand Main Landing Gear (MLG) side stay support fitting.
PART III REPLACEMENT OF THE OUTER / INNER BUSHING OF THE RH MAINLANDING GEAR SIDE STAY SUPPORT FITTING Applicable to: Refer to 1.A. SB EFFECTIVITY aircraft.
The modification presented in PART III of this bulletin consists in replacing the current outer bushing of the RH Main Landing Gear (MLG) side stay support fitting with a new flanged one made from beryllium-copper and support spacers installation. Therefore, the current inner bushing of the RH Main Landing Gear (MLG) side stay support fitting must be replaced also.
To do this, it is necessary to remove the support assembly of the right-hand Main Landing Gear (MLG) side stay support fitting.
NOTE: The modification presented in this bulletin does not affect the Fatigue Critical Structure (FCS).
E. COMPLIANCE
(1) APPLICABLE TO PART I Embraer recommends that PART I of this bulletin be accomplished within the next 100 Flight Cycle(s) or during the next scheduled maintenance check, whichever occurs first.
– If the distance of the outer bushing migration is less than 5 mm, Part II and/or PART III of this bulletin must be accomplished by the time that the aircraft logs 100 Flight Cycle(s) or during the next scheduled maintenance check, whichever occurs first, from the accomplishment of inspection presented in this PART I.
– If the distance of the outer bushing migration is equal to or greater than 5 mm, immediate accomplishment of Part II and/or PART III of this bulletin is required.
(2) APPLICABLE TO PART II Embraer recommends that PART II of this bulletin be accomplished as follows:
– If the distance of the outer bushing migration is less than 5 mm, according to the inspection presented in PART I of this bulletin, this PART II must be accomplished
SERVICE BULLETIN DATE: 10/Jun/2011 REVISION No.:
SB No.: 190LIN-57-0016 PAGE: 3 Copyright © 2011 by Embraer S.A. All rights reserved.
by the time that the aircraft logs 100 Flight Cycle(s) or during the next scheduled maintenance check, whichever occurs first, from the accomplishment of PART I of this bulletin.
– If the distance of the outer bushing migration is equal to or greater than 5 mm, according to the inspection presented in PART I of this bulletin, this PART II must be accomplished immediately.
(3) APPLICABLE TO PART III Embraer recommends that PART III of this bulletin be accomplished as follows:
– If the distance of the outer bushing migration is less than 5 mm, according to the inspection presented in PART I of this bulletin, this PART III must be accomplished by the time that the aircraft logs 100 Flight Cycle(s) or during the next scheduled maintenance check, whichever occurs first, from the accomplishment of PART I of this bulletin.
– If the distance of the outer bushing migration is equal to or greater than 5 mm, according to the inspection presented in PART I of this bulletin, this PART III must be accomplished immediately.
F. APPROVAL The technical aspects of this Service Bulletin are approved by: Agência Nacional de Aviação Civil (ANAC).
G. ESTIMATED MANPOWER This estimate is for direct labor only, performed by experienced personnel, and does not include the time to plan, prepare, or inspect the work.
It is assumed that all the tools, parts, and other means are readily available when necessary.
This estimate does not include the sealant, paint, or adhesive curing time.
SERVICE BULLETIN SB No.: 190LIN-57-0016 PAGE: 4 DATE: 10/Jun/2011 REVISION No.:
Copyright © 2011 by Embraer S.A. All rights reserved.
(1) APPLICABLE TO PART I – Access opening: None.
– Inspection: 0.5 man-hours.
– Modification: None.
– Access closure: None.
– Test: None.
(2) APPLICABLE TO PART II – Access opening: 4.5 man-hours.
– Inspection: None.
– Modification: 2.0 man-hours.
– Access closure: 5.0 man-hours.
– Test: 1.0 man-hour.
NOTE: These estimates do not include the time necessary to accomplish SB 190LIN-32-0017.
(3) APPLICABLE TO PART III – Access opening: 4.5 man-hours.
– Inspection: None.
– Modification: 2.0 man-hours.
– Access closure: 5.0 man-hours.
– Test: 1.0 man-hour.
SERVICE BULLETIN DATE: 10/Jun/2011 REVISION No.:
SB No.: 190LIN-57-0016 PAGE: 5 Copyright © 2011 by Embraer S.A. All rights reserved.
NOTE: These estimates do not include the time necessary to accomplish SB 190LIN-32-0017.
H. WEIGHT AND BALANCE
(1) APPLICABLE TO PART I None.
(2) APPLICABLE TO PART II – Change in basic weight: + 3.0789 lb (+ 1.3966 kg).
– Change in basic moment: + 2164.8 lb.in (+ 24.9 kg.m).
(3) APPLICABLE TO PART III – Change in basic weight: + 3.0789 lb (+ 1.3966 kg).
– Change in basic moment: + 2164.8 lb.in (+ 24.9 kg.m).
I. SOFTWARE ACCOMPLISHMENT SUMMARY None.
J. REFERENCES AMM 190LIN/( ) Aircraft Maintenance Manual PART II - 07-10-01 - LIFTING & SHORING.
AMM 190LIN/( ) Aircraft Maintenance Manual PART II - 20-00-00 - STANDARD PRACTICES-AIRFRAME.
AMM 190LIN/( ) Aircraft Maintenance Manual PART II - 29-10-00 - HYDRAULIC POWER.
AMM 190LIN/( ) Aircraft Maintenance Manual PART II - 32-00-00, 32-00-03, 32-11-05, and 32-11-09 - LANDING GEAR.
SERVICE BULLETIN SB No.: 190LIN-57-0016 PAGE: 6 DATE: 10/Jun/2011 REVISION No.:
Copyright © 2011 by Embraer S.A. All rights reserved.
SRM 190LIN/( ) Structural Repair Manual Part II - 51-21-01, 51-21-02, and 51-21-07 - STANDARD PRACTICES AND STRUCTURES.
K. OTHER PUBLICATIONS AFFECTED AIPC 190LIN/( ) Aircraft Illustrated Parts Catalog - 32-11-05 - LANDING GEAR.
AMM 190LIN/( ) Aircraft Maintenance Manual PART II - 32-11-05 - LANDING GEAR.
SERVICE BULLETIN DATE: 10/Jun/2011 REVISION No.:
SB No.: 190LIN-57-0016 PAGE: 7 Copyright © 2011 by Embraer S.A. All rights reserved.
2. MATERIAL INFORMATION A. MATERIAL - PRICE AND AVAILABILITY
(1) MATERIAL AVAILABLE FROM EMBRAER The kit(s) below, required for the accomplishment of this bulletin, will be available from Embraer according to the commercial conditions defined in the item 2.B.
INDUSTRY SUPPORT INFORMATION of this service bulletin.
The estimated delivery date will be provided by Embraer upon request.
When ordering, specify SB 190LIN-57-0016 and Top Kit PN presented in Table below, as applicable.
REF TOP KIT PN Unit Price(US$) TOP KIT EFFECTIVITY 01 BSLIN5700160001 PART II / Refer to 1.A. SB EFFECTIVITY aircraft.
02 BSLIN5700160002 PART III / Refer to 1.A. SB EFFECTIVITY aircraft.
(2) MATERIAL AVAILABLE FROM OTHER VENDORS None.
B. INDUSTRY SUPPORT INFORMATION
(1) WARRANTY COVERAGE
(a) Parts The SB kit will be provided at no charge.
(b) Labor Will be reimbursed by Embraer to the limit defined in the item1.G. ESTIMATED MANPOWER if performed at an Embraer-Authorized Service Center.
SERVICE BULLETIN SB No.: 190LIN-57-0016 PAGE: 8 DATE: 10/Jun/2011 REVISION No.:
Copyright © 2011 by Embraer S.A. All rights reserved.
(c) Expiration The terms expressed in the warranty coverage will be valid for 36 months after the SB issue date.
C. MATERIAL NECESSARY FOR EACH AIRCRAFT When applicable, the use of alternative or similar parts in place of the one specified in the kits is allowable, provided that these alternative or similar parts are approved by Embraer as indicated in the related Embraer Technical Publications or through a formal Embraer communication channel.
The necessary expendable or consumable parts presented in the AMM Tasks referred to in this bulletin should be procured from the operator’s inventories or ordered as spares.
The complementary information, when necessary, is presented as Notes in the respective Table.
For ordering information and Top Kit effectivity refer to section 2.A. MATERIAL - PRICE AND AVAILABILITY of this Bulletin.
(1) TOP KITS AND KITS Kit Summary: Top Kit Composition (Kit PN / Quantity) Top Kit PN 191-07090-603 191-07090-604 191-21800-603 191-21800-604 BSLIN5700160001 01 - 01 - BSLIN5700160002 - 01 - 01
(a)
SERVICE BULLETIN DATE: 10/Jun/2011 REVISION No.:
SB No.: 190LIN-57-0016 PAGE: 9 Copyright © 2011 by Embraer S.A. All rights reserved.
Kit PN 191-07090-603 - SIDE STAY BUSHING, SB KIT NEW PN DESCRIPTION OLD PN QTYSUP QTYRQD DISP/Notes 191-07080-005 Inner Bushing 191-07080-003 01 01 3 191-19356-003 Outer Bushing 190-32805-003 or190-32805-023 01 01 3
(b) Kit PN 191-07090-604 - SIDE STAY BUSHING, SB KIT NEW PN DESCRIPTION OLD PN QTYSUP QTYRQD DISP/Notes 191-07080-005 Inner Bushing 191-07080-003 01 01 3 191-19356-003 Outer Bushing 190-32805-003 or 190-32805-023 01 01 3
(c) Kit PN 191-21800-603 - SIDE STAY BUSHING, SB KIT NEW PN DESCRIPTION OLD PN QTYSUP QTYRQD DISP/Notes 191-19357-001 Space Tube - 01 01 2 191-19358-401 Space Tube - 01 01 2 NAS6303-7 Bolt - 04 04 2 NAS1149C0363R Washer - 04 04 2
(d)
SERVICE BULLETIN SB No.: 190LIN-57-0016 PAGE: 10 DATE: 10/Jun/2011 REVISION No.:
Copyright © 2011 by Embraer S.A. All rights reserved.
Kit PN 191-21800-604 - SIDE STAY BUSHING, SB KIT NEW PN DESCRIPTION OLD PN QTYSUP QTYRQD DISP/Notes 191-19357-001 Space Tube - 01 01 2 191-19358-401 Space Tube - 01 01 2 NAS6303-7 Bolt - 04 04 2 NAS1149C0363R Washer - 04 04 2
(2) MATERIAL TO BE PROCURED
(a) Parts The parts below, if required for the accomplishment of this bulletin, should be ordered as spares from Embraer.
Applicable to all Top Kit NEW PN DESCRIPTION OLD PN QTY DISP/Notes 191-19356-007 Outer Bushing 190-32805-003 or 190-32805-023 AR 3 191-21788-001 AFT Inner Bushing 191-07080-003 AR 3/ [1] 191-21789-001 FWD Inner Bushing 190-32803-003 or 190-32803-021 AR 3/ [1]
1. When necessary, these parts must be ordered together.
(b) Consumable Materials The material below or equivalent, required for the accomplishment of this bulletin, should be procured from the operator’s inventories or from a local supplier.
SERVICE BULLETIN DATE: 10/Jun/2011 REVISION No.:
SB No.: 190LIN-57-0016 PAGE: 11 Copyright © 2011 by Embraer S.A. All rights reserved.
Applicable to all Top Kit NEW PN DESCRIPTION OLD PN QTY DISP/Notes RHODIASOLVE E-23 Solvent - AR 6/ [1] PR1776M B-2 Sealant - AR 6/ [2] COR-BAN 27L Corrosion-inhibitingcompound -A R 6 / [3] AEROSHELL 33 Synthetic grease - AR 6/ [4] ARDROX AV-15 Corrosion-inhibiting compound -A R 6 / [5] 70307-12 Lubricant Medium Paste (BOELUB) -A R 6/ [6]
1. Solvent for Manual Cleaning (MEP 13-073) RHODIASOLVE E-23
2. Class B2 Low-Density Polysulfide Sealant (AMS3281) PR1776M B-2
3. Corrosion Inhibiting Compound (MEP_09-075) COR-BAN 27L
4. Synthetic Grease (MIL-PRF-23827) AEROSHELL 33
5. Corrosion Inhibiting Compound (MEP_10-063) ARDROX AV-15
6. Class V-D(2) Lubricant Paste (-) 70307-12 (Spec BAC 5008) DISPOSITION: 2 = Incorporate part bearing NEW PN 3 = Replace part bearing OLD PN with part bearing NEW PN 6 = Apply as required QUANTITY: AR = As Required D. MATERIAL NECESSARY FOR EACH SPARE None.
E. REIDENTIFIED PARTS None.
SERVICE BULLETIN SB No.: 190LIN-57-0016 PAGE: 12 DATE: 10/Jun/2011 REVISION No.:
Copyright © 2011 by Embraer S.A. All rights reserved.