TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2ab92ce754f4e8b49e3dfa9d7df5d846a5a305aad7987c4bac1b4ee7f3e8b80a' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2ab92ce754f4e8b49e3dfa9d7df5d846a5a305aad7987c4bac1b4ee7f3e8b80a' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
██ ██ ALERT SER VICE
BULLETIN ENGINE — BLADE
ASSEMBL Y , 1ST ST AGE LOW
PRESSURE
COMPRESSOR (LPC) ROT OR —
ONE-TIME UL
TRASONIC
INSPECTION FOR CRACKS MODEL
APPLICA TION GP7270, GP7277
BULLETIN ISSUE
SEQUENCE EAGP7 Series A72-426 A T A NUMBER 72-00-31 ENGINE
ALLIANCE, LLC.
PROPRIET AR Y
INFORMA TION The information contained in this document is Engine Alliance, LLC (“EA”) Proprietary Information and is disclosed in confidence.
It is the property of EA and shall not be used, disclosed to others or reproduced for any purpose, including, without limitation, to design, manufacture or repair parts or to obtain F AA or other government approval to do so, without the express written consent of EA.
Neither receipt nor possession of this document alone, from any source, constitutes such permission.
Unauthorized possession, use, copying or disclosure may result in criminal and/or civil liability .
If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or in part.
This technical data is considered subject to the Export Administration Regulations (EAR) pursuant to 15 CFR Parts 730-774 respectively .
T ransfer of this data by any means to a Non-US Person, whether in the United States or abroad, without the proper U.S.
Government authorization
(i.e.
export license, license exception, NLR), is strictly prohibited.
Export Classification:
EAR ECCN 9E991 Compliance Category 2 EA Distribution Code 2686, 2687 September 30/19 EAGP7-A72-426 Page 1 of 13
Summary The purpose of this Alert Service Bulletin is to perform an ultrasonic inspection of the 1st stage Low Pressure Compressor (LPC) rotor (Fan) blade assemblies (to be referred to as a fan blade) for cracks.
A GP7200 engine fan blade fractured due to a fatigue crack.
Analysis indicates ultrasonic inspection for cracks of a localized area on the fan blade convex airfoil is a necessary interim action to mitigate the risk of a fan blade fracture event.
In addition, data from this inspection will be used to help define the final action.
Planning Information Ef fectivity Data Engine Models Applicable GP7270, GP7277 Engine Serial Nos.
— All engines with fan blades that have 3,250 flight cycles since new or more on October 1, 2019 Fan Blade Serial Nos.
— All fan blades that have 3,250 flight cycles or more since new on October 1, 2019 Concurrent Requirements There are no concurrent requirements.
Reason
1.
Problem:
A GP7200 engine hollow fan blade experienced a crack that originated on the internal surface of the convex airfoil and propagated to the point of airfoil fracture.
2.
Cause:
The fatigue crack originated in an area of microtexture.
Microtexture can result in a low cycle fatigue debit which may allow a crack to initiate and possibly propagate to airfoil fracture.
3.
Solution:
Do a one-time ultrasonic inspection for cracks of a limited population of fan blades to mitigate the risk of a fan blade fracture event.
The inspection is of a localized area on the fan blade convex airfoil.
Description Do an ultrasonic inspection for cracks of the 1st stage LPC Rotor (Fan) blade assemblies.
Compliance Category 2 For 1st stage LPC Rotor (Fan) blade assemblies with 3,250 flight Cycles Since New (CSN) or more as of October 1, 2019, do the ultrasonic inspection within 250 flight cycles (as of October 1, 2019).
Af fected fan blades previously inspected to Reference 5, NDIP-1205, Original Issue, dated August 30, 2019 have complied with the requirements of this Service Bulletin.
NOTE :
Fan blades that get to 3,250 flight CSN after October 1, 2019 are not subject to this Service Bulletin.
Approval Data The times between inspections specified in Compliance and the inspection procedures specified in the Accomplishment Instructions agree with the applicable Federal A viation Regulations and are F AA-Approved for the engine model(s) given.
September 30/19 EAGP7-A72-426 Page 2 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the export control restrictions on the cover or first page.
The inspection procedures described in this Service Bulletin are reviewed and technically accepted by Airbus to apply to the Airbus fleet af fected.
This Service Bulletin does not contain any change information that revises the equipment definition covered by Airbus approved modifications Manpower The estimate of man-hours of labor directly necessary to do the intent of this Service Bulletin are as follows:
For Fan Blades Installed In An Engine (set of 24 blades):
1.
Necessary to do the Inspection .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8.0
2.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8.0 For Fan Blades Not Installed In An Engine (set of 24 blades):
1.
Necessary to do the Inspection .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8.0
2.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8.0 W eight Data Not Applicable.
Electrical Load Data Not Applicable.
Software Accomplishment Summary Not Applicable.
References
1.
Engine Alliance Standard Practices Manual, Part No.
5700139.
2.
Engine Alliance GP7270, and GP7277, Illustrated Parts Catalog, Part No.
5700308.
3.
GP7000 Series, Engine Manual, Part No.
5700147.
4.
Airbus Aircraft Maintenance Manual (AMM).
5.
Non-Destructive Inspection Procedure, NDIP-1205, Revision 1 — GP7000 1st Stage LPC Rotor (Fan) Blade Assembly Airfoil Ultrasonic Inspection for Cracks (Fan Blades installed or uninstalled), Date of Issue:
September 23, 2019.
6.
Engine Alliance Special Instruction No.
863F-19, Fan Blade Removal and Installation — Interim Procedure In Advance of Aircraft Maintenance Manual (AMM) Update
7.
Engine Alliance Special Instruction No.
864F-19, Fan Blade Removal and Installation — Interim Procedure In Advance of Engine Manual (EM) Update Publications Changed Engine Alliance GP7270 and GP7277, Illustrated Parts Catalog, Part No.
5700308.
72-00-31, Figure 2 Interchangeability Not Applicable.
September 30/19 EAGP7-A72-426 Page 3 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the export control restrictions on the cover or first page.
Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (No) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (Y es) September 30/19 EAGP7-A72-426 Page 4 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the export control restrictions on the cover or first page.
Material Information Material — Cost and A vailability
1.
There is no new material cost to do this Service Bulletin if there are no rejected fan blades.
2.
Part prices were not available at the time of Service Bulletin publication.
Contact Engine Alliance Spares Management & Logistics for firm quotations.
3.
There is no kit provided to do this Service Bulletin.
4.
Part availability information is provided in material data Instructions — Disposition.
Industry Support Program Contact your Customer Support Manager (CSM).
The material data that follows is for each engine.
NOTE :
It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.
Because there are many dif ferent configurations used, it is frequently necessary to show more than one group of parts.
When this occurs, parts that are interchangeable are shown line-by-line only , unless this is shown dif ferently .
CAUTION :
THE
FOLLOWING MA TERIAL DA T A T
ABLE(S) ARE
ORGANIZED BY
ILLUSTRA TED P AR TS CA T ALOG.
ALL P AR TS IN THE T
ABLE(S) MA Y OR MA Y NOT BE
APPLICABLE T O ALL THE ENGINE MODELS SHOWN IN THE T ABLE HEADING.
YOU MUST REFER T O THE
APPROPRIA TE
ILLUSTRA TED P AR TS CA T ALOG FOR ENGINE MODEL
APPLICABILITY USING THE OLD P AR T NUMBER (PN) AND CA T ALOG
SEQUENCE NUMBER.
F AILURE T O INST ALL THE P AR T(S) IN THE
CORRECT ENGINE MODEL MA Y RESUL T IN A
CONFIGURA TION THA T IS NOT F AA APPROVED.
The material data that follows is for each engine.
For GP7270, GP7277 Engines:
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 24 BLADE — ASSY OF , 1ST ST AGE LPC ROT OR, 5700531 (72-00-31-2-10)
(4)(C)(X) OR 24 * BLADE — ASSY OF , 1ST ST AGE LPC ROT OR, 5702931 (72-00-31-2-10 A)
(4)(C)(X) OR 24 BLADE — ASSY OF , 1ST ST AGE LPC ROT OR, 5702931CL1 (72-00-31-2-10 B)
(4)(N)(X) September 30/19 EAGP7-A72-426 Page 5 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the export control restrictions on the cover or first page.
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition OR 24 BLADE — ASSY OF , 1ST ST AGE LPC ROT OR, 5702931CL2 (72-00-31-2-10 B)
(4)(N)(X) Modification and Spares Information Estimated part prices are provided when they are available at time of publication.
The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.
An asterisk (*) is shown where part pricing information was unavailable.
In either case, contact Engine Alliance, LLC.
Spares Management & Logistics for firm quotations.
Parts Modification Conditions
(4) Do an inspection as specified in the Accomplishment Instructions.
Spare Parts A vailability (C) The old part will continue to be supplied.
(N) The old part is not available.
(X) See Reference 2, Illustrated Parts Catalog for applicable replacement parts.
V endor Services or Special Components/Materials Not Applicable.
Material Data for Each Spare Engine The material for each spare engine is as stated in the preceding material information section.
Reidentified Parts Not Applicable.
Necessary T ools See Reference 5, NDIP-1205, in the Inspection Procedures section of the Appendix for the Support Equipment necessary to perform this inspection.
Other Material Information Data Not Applicable.
September 30/19 EAGP7-A72-426 Page 6 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the export control restrictions on the cover or first page.
Accomplishment Instructions For Fan Blades Installed In An Engine NOTE :
Service Bulletin incorporation on engines installed on aircraft may be desirable and should be individually evaluated.
NOTE :
See Reference 5, NDIP-1205 in the Inspection Procedures section of the Appendix for the consumable materials necessary to perform this inspection.
1.
Do an ultrasonic inspection of the fan blades, PN 5700531, PN 5702931, PN 5702931CL1, and PN 5702931CL2, as specified in Reference 5, NDIP-1205.
See Figure 1 and the Inspection Procedures section of the Appendix.
2.
Fan blade(s) with rejectable ultrasonic indication(s) as specified in Reference 5, NDIP-1205, must be removed from service as follows:
A.
Remove the inlet cone, front and rear segments, as specified in Reference 4, AMM T ask 72-31-41-000-803-A:
Removal of the Inlet Cone or Reference 3, EM T ask 72-00-31-020-001:
Remove The Inlet Cone.
CAUTION :
YOU MUST USE THE STEPS AND THE T OOLS (PW A 107918, PW A 107919, PW A 107426 AND PW A 107525)
SPECIFIED IN THE
PROCEDURE BELOW T O REMOVE THE F AN BLADE LOCK.
USE OF AL TERNA TE T OOLING T O REMOVE THE F AN BLADE LOCK IS NOT PERMITTED.
IF YOU DO NOT OBEY THIS
INSTRUCTION, YOU CAN DAMAGE THE HUB WHICH CAN CAUSE THE HUB T O BE
DISCARDED OR
POSSIBL Y CAUSE ENGINE OR
AIRCRAFT DAMAGE.
B.
Remove the af fected fan blade(s) as specified in Reference 4, AMM T ASK 72-31-42-000-802-A:
Removal of the LP Compressor 1st Stage (Fan) Blades or Reference 3, EM T ask 72-00-31-020-002:
Remove The 1st Stage Compressor Rotor Fan Blades.
(1) See Reference 6, SI No.
863F-19 or Reference 7, SI No.
864F-19 as applicable.
CAUTION :
YOU MUST USE THE STEPS AND THE T OOLS (PW A 107918, PW A 107919, PW A 107426 AND PW A 107525)
SPECIFIED IN THE
PROCEDURE BELOW T O INST ALL THE F AN BLADE LOCK.
USE OF AL TERNA TE T OOLING T O INST ALL THE F AN BLADE LOCK IS NOT PERMITTED.
IF YOU DO NOT OBEY THIS
INSTRUCTION, YOU CAN DAMAGE THE HUB WHICH CAN CAUSE THE HUB T O BE
DISCARDED OR
POSSIBL Y CAUSE ENGINE OR
AIRCRAFT DAMAGE.
C.
Install the replacement fan blade(s) as specified in Reference 4, AMM T ASK 72-31-42-400-802-A:
Installation of the LP Compressor 1st Stage (Fan) Blades or Reference 3, EM T ask 72-00-31-420-004:
Install The 1st Stage Compressor Rotor Fan Blades.
(1) See Reference 6, SI No.
863F-19 or Reference 7, SI No.
864F-19 as applicable.
D.
Install the inlet cone, front and rear segments, as specified in Reference 4, AMM T ask 72-31-41-400-803-A:
Installation of the Inlet Cone or Reference 3, EM T ask 72-00-31-420-005:
Install The Inlet Cone.
E.
Return the fan blade(s) with rejectable ultrasonic indication(s) to the repair vendor for further engineering evaluation.
September 30/19 EAGP7-A72-426 Page 7 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the export control restrictions on the cover or first page.
3.
After ultrasonic inspection, witness marks may be visible on the fan blade airfoil due to dirt/debris becoming trapped between the probe and airfoil during inspection.
See Figure
2.
A.
These marks are serviceable if they are superficial.
NOTE :
A superficial mark is defined as an imperfection which disrupts the surface and appears to have a smooth edge but does not penetrate the surface roughness texture.
This condition is so slight that there is no perceptible depth.
B.
If the marks are not superficial, refer to fan blade airfoil damage limits (hollow area) for disposition.
See Reference 4, AMM T ASK 72-31-42-210-803-A:
V isual Inspection of the Low-Pressure-Compressor (LPC) 1st-Stage (Fan) Blade-Airfoil for Surface Damage and Cracks or Reference 3, EM T ask 72-00-31-220-010:
V isually Inspect The Low Pressure Compressor (LPC) Module For Serviceability .
September 30/19 EAGP7-A72-426 Page 8 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the export control restrictions on the cover or first page.
For Fan Blades Not Installed In An Engine NOTE :
See Reference 5, NDIP-1205 in the Inspection Procedures section of the Appendix for the consumable materials necessary to perform this inspection.
1.
Do an ultrasonic inspection of the fan blades, PN 5700531, PN 5702931, PN 5702931CL1, and PN 5702931CL2, as specified in Reference 5, NDIP-1205.
See Figure 1 and the Inspection Procedures section of the Appendix.
2.
Fan blade(s) with rejectable ultrasonic indication(s) as specified in Reference 5, NDIP-1205, must be removed from service as follows:
A.
Return the fan blade(s) with rejectable ultrasonic indication(s) to the repair vendor for further engineering evaluation.
3.
After ultrasonic inspection, witness marks may be visible on the fan blade airfoil due to dirt/debris becoming trapped between the probe and airfoil during inspection.
See Figure
2.
A.
These marks are serviceable if they are superficial.
NOTE :
A superficial mark is defined as an imperfection which disrupts the surface and appears to have a smooth edge but does not penetrate the surface roughness texture.
This condition is so slight that there is no perceptible depth.
B.
If the marks are not superficial, refer to fan blade airfoil damage limits (hollow area) for disposition.
See Reference 4, AMM T ASK 72-31-42-210-803-A:
V isual Inspection of the Low-Pressure-Compressor (LPC) 1st-Stage (Fan) Blade-Airfoil for Surface Damage and Cracks or Reference 3, EM T ask 72-00-31-220-010:
V isually Inspect The Low Pressure Compressor (LPC) Module For Serviceability .
September 30/19 EAGP7-A72-426 Page 9 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the export control restrictions on the cover or first page.
ED Engine Allance _5700531, 5702931, 5702931CL1, 5702931CL2, 1ST STAGE LPC RO OR BLADE ASSEMBLY (FAN BLADE) INSPE T AS SPECIFIED
IN THE ACCOMPLISHMENT INSTRUCTIONS B529116 LOCATION OF THE 1ST STAGE LPC ROTOR BLADE ASSEMBLY (FAN BLADE) 72-00-31 FIGURE 1 September 30/19 EAGP7-A72-426 Page 10
ENGINE ALLIANCE, LLC PROPRIETARY INFORMATION Subject to the export control restrictions on the cover or first page.
ER Engine Alliance
WITNESS MARKS B529115
VIEW OF THE WITNESS MARKS ON THE FAN BLADE FIGURE 2 September 30/19 EAGP7-A72-426 Page 11
ENGINE ALLIANCE, LLC PROPRIETARY INFORMATION Subject to the export control restrictions on the cover or first page.
Appendix Added Data Internal Reference Information Revision No.
Reference Document Origination Original EA19AC157 CL/JEJ Number values shown in parentheses adjacent to U.S.
values are International System of units (SI) equivalents.
T o calculate part life, include the hours and/or cycles since the part was made.
Use the total hours or cycles to calculate life limits that are the result of part modification, a part used in an engine with dif ferent thrust, or for some other reason.
September 30/19 EAGP7-A72-426 Page 12 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the export control restrictions on the cover or first page.