TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2e97e47baaf7bda75e39718698e15c556ffbb24e34531734bfd3489b3143159e' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2e97e47baaf7bda75e39718698e15c556ffbb24e34531734bfd3489b3143159e' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
FOKKER SERVICES
Service Bulletin Prepared Function / Note Date peels-jp02237 23-08-2017 Colleague Check bemelman-pb01821 22-08-2017 Manager Final Approval peter.hof 23-08-2017 Office of Airworthiness Approval visser-hv01800 23-08-2017
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
EASA approved procedure for electronic sign-off
F100/70 Generic SB
SBF100-32-169
Revision -
LANDING GEAR - MAIN GEAR
One-time Inspection of the Piston for Cracks
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
1. General Information A. General
(1) This document is digitally prepared, checked and released (Electronic Sign-Off, E.S.O.). This means that physical signatures on the document front page are replaced by digital signatures. The document is signed and released when the name and date of signature of the engineer concerned is filled out on the front page of the document. The digital document, workflow, revision history and proof of sign-off are stored and controlled in the Fokker product data management system. Electronic sign-off is approved by EASA. The procedure and process of E.S.O. are checked regularly during internal audits and via EASA oversight.
B. Table of Contents
Section 1: General Information Section 2: Planning Information Section 3: Material Information Section 4: Accomplishment Instructions Questionnaire SBF100-32-169 Service Bulletin Quality Reporting Form and attachments (if applicable):
C. Service Bulletin Revision History
Revision Date (dd-mm-yyyy) Reason for Revision
- Refer to footer First Release
LANDING GEAR - MAIN GEAR
One-time Inspection of the Piston for Cracks.
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
2. Planning Information A. Effectivity
(1) F28 Mark 0070/0100 aircraft serial number(s):
11244 thru 11585
B. Concurrent Requirements
(1) Not applicable.
C. Reason
(1) During a normal walk around check a large crack was discovered in the lower portion of the LH Main Landing Gear (MLG) piston. Visual examination of the piston showed a crack running on the aft side from the upper part of the wheel axle platform down through the area between and across the lower torque link attachment lugs to the bore on the lower side of the piston. Also a horizontal crack running on the aft side of the piston, in the transition area from piston tube to wheel axle platform, and cracks running through the holes for the brake torque pin, were visible. See figure 2 for more details.
(2) The affected MLG piston accumulated 3216 FC since overhaul and modification from pn 41141-3 into pn 41141-5 and 16745 CSN.
(3) Pistons pn 41141-3 are subject to repetitive inspections per the Airworthiness Limitations Section, report SE-623, task 321100-01-16 until modification into pn 41141-5 as terminating action per SBF100-32-161 and EASA AD 2011-0159.
(4) Pistons pn 41141-5 are presently not subject to any scheduled inspections.
(5) The piston will be sent to Goodrich for detailed investigation. The affected operator visually inspected all MLG pistons in their fleet without any further findings.
(6) In order to safeguard fleet airworthiness a detailed visual inspection of Goodrich MLG pistons with pn 41141-5 is required as a short term action. After the inspections are finalized, the results in combination with the findings of the metallurgical investigation of the cracked piston will be used to determine the necessity of additional and/or more detailed inspections.
If equipped with Goodrich MLG pn’s:
41050 -7/-8/-9/-10/-11/-12/-13/-14/- 15/-16 or 41060 -1/-2/-3/-4/-5/-6 in a post-mod Goodrich SB41000-32-29 configuration.
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
D. Description
(1) This Service Bulletin tells you how to:
- Do an inspection of the MLG piston.
- Report back all findings to Fokker Services.
E. Compliance
(1) Recommended Fokker Services recommends the accomplishment of the Service Bulletin within 6 weeks after the date of issue of this Service Bulletin, but not later than within the compliance time defined in the AD (see note below) which takes precedence over the recommendation by Fokker Services.
NOTE: It is expected that EASA will issue an Airworthiness Directive (AD) with respect to this subject with the same compliance terms. Refer to the EASA website for the publication of the Airworthiness Directive.
F. Approval
(1) The technical content of this document is approved under the authority of DOA ref.
EASA.21J.059.
G. Manpower
(1) Approximately 2,2 man-hours are necessary to do this Service Bulletin on one aircraft.
This table of manpower will help you to schedule and do this Service Bulletin:
Elapsed time (hours) Removal 2 1.0 0.5 Modification Inspection Installation 2 1.0 0.5 Testing - - - Total 2.2 1.1
0.1 Instructions Men Man-hours 2 0.2
NOTE: This estimate does not include the time necessary for corrective action.
(2) The estimated hours are for direct labor done by experienced personnel. They are calculated based on the conditions given in SBF100-00-001 (Service Bulletin Introduction, section 2.C., “Manpower”).
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
H. Weight and Balance
(1) Weight change: None.
Index change: None.
I. Electrical Load Data
(1) Direct Current (DC) Loads:
(a) Not changed.
(2) Alternating Current (AC) Loads:
(a) Not changed.
J. Software Accomplishment Summary
(1) Not applicable.
K. References
(1) Fokker 70/100 Aircraft Maintenance Manual (AMM) Fokker 70/100 Illustrated Parts Catalog (IPC) Fokker 70/100 Airworthiness Limitations Section, Part 2 (report SE-623) Fokker 70/100 SBF100-32-161 Goodrich SB 41000-32-28R1 Goodrich SB 41000-32-29 Goodrich CMM 32-12-03 EASA AD 2011-0159
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
L. Publications Affected
(1) This Service Bulletin affects the publications listed below:
(a) Maintenance Documentation
Not affected.
(b) Maintenance Programs Not affected
(c) Special Instructions for Continued Airworthiness (ICA) The effect of this Service Bulletin on the special ICA is as follows:
YES NO
- Electrical Wiring Interconnection System (EWIS) - X
- Fokker 70/100 Airworthiness Limitations Section (ALS):
Fuel Tank Safety (FTS) - X Damage Tolerance of Fatigue Critical Structure (FCS) - X Certification Maintenance Requirements (CMR) - X NOTE: If “YES”, when not already incorporated, the changed ICA will be incorporated in the MRB, the Airworthiness Limitations Section (ALS) and/or the AMM document(s) within one calendar year from the date of issue of this Service Bulletin. Until then, no actions are required.
(d) Operational Documentation Not affected.
(2) You have the possibility to send your SB feedback to Fokker Services per “Service Bulletin Reporting Quality Form”. This form is located on the last Service Bulletin page.
M. Interchangeability or Intermixability of Parts
(1) Not applicable.
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
3. Material Information A. Material – Price and Availability
(1) The materials are local source items.
B. Material Required
(1) These parts, which are necessary to complete this Service Bulletin on 1 aircraft, are not part of the mod kit.
New Part Number Qty Keyword Info Old Part Number Instructions/ Disposition MS24665-151 8 Split pin - MS24665-151 Local source
(2) These mod kit parts are necessary to do this Service Bulletin on 1 aircraft:
(a) Not applicable C. Tooling – Price and Availability
(1) Not applicable.
D. Tooling Required
(1) Not applicable.
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
4. Accomplishment Instructions
General:
- Put up warning signs in the flight compartment and at the hydraulic ground-servicing panel to tell persons: “DO NOT PRESSURIZE THE HYDRAULIC SYSTEMS”.
- Make sure the ground safety pins are installed.
- These instructions are applicable to the left and right MLG installations.
WARNING: BE CAREFUL WHEN YOU USE THE CONSUMABLE MATERIALS. OBEY
THE INSTRUCTIONS AND MANUFACTURER'S HEALTH AND SAFETY INSTRUCTIONS.
NOTE 1: The procedure is given for one MLG. The procedure for the other MLG (if applicable) is the same.
NOTE 2: When the aircraft is on jacks the procedure can be applied to both the LH and RH MLG at the same time.
A. Lift the aircraft with jacks ref. AMM chapter 07-11-00-582-812.
or Lift one MLG with a jack ref. AMM chapter 07-11-00-582-832.
B. Remove the MLG wheel and brake from the MLG (this to create adequate access for the cleaning and inspection of the piston), refer to AMM chapter 32-42-01-000-814.
C. Remove the protection plate pn 41231-1 from the piston, refer to figure 1 and to IPC chapter 32-11-11. Keep the protection plate, bolts, nuts and washers. Discard the split pins.
D. Clean the piston pn 41141-5 in the inspection area in accordance with Goodrich Service Bulletin SB 41000-32-28R1.
E. Inspect the wheel axle platform between the lower torque link attachment lugs for cracks in accordance with Goodrich Service Bulletin SB 41000-32-28R1.
NOTE: See figure 2 of this Service Bulletin for details of the found cracks in the MLG piston.
F. Replace a cracked piston in accordance with AMM chapter 32-11-08-000/400-814.
G. Install the protection plate on the bottom side of the MLG piston, refer to figure 1 and to IPC chapter 32-11-11. Wrench torque the 4 bolts to 9 – 11,3 Nm (80 – 100 inch.lbs). Use the parts that you kept in step C and use new split pins pn MS24665-151.
H. Install the MLG wheel and brake on the MLG, refer to AMM chapter 32-42-01-400-814.
I. Lower the aircraft, ref. AMM chapter 07-11-00-582-822.
or Lower the MLG, ref. AMM 07-11-00-582-842, and repeat steps A through I on the other MLG if applicable.
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
J. Vibro-peen SBF100-32-169 and date accomplished on nameplate on Main Fitting (refer to Goodrich CMM 32-12-03 item (1-20)).
CAUTION: DO NOT LETTER STAMP NAMEPLATE ON ASSEMBLY. THIS CAN DAMAGE THE ASSEMBLY.
K. Remove warning signs.
L. Clean the work area from tools, ground equipment, materials and debris.
M. Complete the attached questionnaire with the applicable information and send to Fokker Services. Also report in case of nil finding!
NOTE: If a crack is found, report to Goodrich in accordance with the instructions in Goodrich SB 41000-32-28R1.
FOKKER SERVICES Yokker Service Bulletin > GKN AEROSPACE 70
• 90 VIEW A 110 Typical installation of the protection plate (only RH side shown) Protection Plate Installation Figure 1 Status: Revision: Released date: (dd-mm-yyyy) Released 23-08-2017 Security class: F100/70 Generic SB no.:
RESTRICTED SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained therein for purposes other than explicitly allowed by the aforesaid agreement, is not permittec except with the prior written permission of Fokker Services B.V.
Page 9 of 12
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
Example of Cracks in the Piston Figure 2 Upper side view Bottom side view Side view Location of cracks in the MLG piston Inspection:
Thoroughly clean the inspection area.
Use a 10X magnifier to examine the area for cracks.
NOTE 1: Pay particular attention to areas adjacent to the wiring harness hole.
NOTE 2: The expanding plug may remain installed
FOKKER SERVICES
Service Bulletin
Status:
Released Revision:
- Released date: (dd-mm-yyyy) 23-08-2017 Security class:
RESTRICTED F100/70 Generic SB no.:
SBF100-32-169 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other th an explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
Questionnaire SBF100-32-169
MLG Piston pn 41141-05 Inspection for Cracks
Send to : Fokker Services Technical Services Fax : 31 (0) 252 627211 E mail : technicalservices@fokker.com
Airline: ______________ A/C sn: ________ Accomplish date: _____ A/C FH's: ______ A/C FC's: ______
LH MLG RH MLG Crack: Yes / No Yes / No MLG Pn:
MLG Sn:
MLG CSN:
MLG CSO:
Piston Pn:
Piston Sn:
Piston CSN:
Piston CSO: