TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '223c2776bb5e9bdae4e2ddcc99583b11b2560820160316e2ecb06df91ba9426a' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '223c2776bb5e9bdae4e2ddcc99583b11b2560820160316e2ecb06df91ba9426a' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
. SERVICE BULLETIN .
TO: ALL HOLDERS OF SERVICE BULLETIN 5000ELM-28-075, DATED May 06/14.
FROM: GE AVIATION SYSTEMS LTD
This page transmits Revision No. 1 to Service Bulletin 5000ELM-28-075. Revision No. 1 replaces Service Bulletin 5000ELM-28-075, dated May 06/14 in its entirety.
This revision:
1. Corrects the list of designated aircraft affected on Pages 1 and 2.
2. Amends Figure 2 on Page 5 to show improved clarity and location of the specified SIUs.
Changed material is indicated with revision bars.
No text on this page: it may be a figure. Open the PDF to see it.
GE Aviation CAGE CODE: K5294 GEK 131222 Global Contact: systems.support@ge.com GE Ref: SCD S281W601 Revision BB plus ADRN 16H Manual Ref: N/A
SERVICE BULLETIN
Copyright (2014), GE Aviation Systems Ltd., U.K.
The information contained in this document is GE Aviation Systems Ltd proprietary information and is disclosed in confidence. It is the property of GE Aviation Systems Ltd and shall not be used, disclosed to others or reproduced without the express written consent of GE Aviation Systems Ltd, including, but without limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modifications, spare parts, design, or configuration changes or to obtain FAA or any other government or regulatory approval to do so. If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or in part. The information contained in this document may also be controlled by U.S. export control laws. Unauthorized export or re-export is prohibited.
Destination Control Statement This technical data is considered EAR controlled pursuant to 15 CFR Parts 730-774. Transfer of this data by any means to another party without the proper U.S. Government authorization is strictly prohibited.
5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 1 of 12 FUEL SYSTEMS - P110 LEFT POWER MANAGEMENT PANEL
5***ELM2*
ADDITION OF FUEL SCAVENGE WIRING
1. PLANNING INFORMATION WARNING: FAILURE TO CORRECTLY IMPLEMENT ANY INSTRUCTION GIVEN HERE, AS
AMENDED FROM TIME TO TIME BY GE AVIATION, MAY ENDANGER HEALTH OR SAFETY.
A. Effectivity
(1) Aircraft affected: Boeing 777-200, F, -200LR, -300 and -300ER
(2) Unit affected: P110 Left Power Management Panel
(3) Unit part numbers: GE Part No. Boeing Part No 52**ELM2* S281W601-52** 53**ELM2* S281W601-53** 54**ELM2* S281W601-54** 55**ELM2* S281W601-55** 56**ELM2* S281W601-56** 57**ELM2* S281W601-57** 59**ELM2* S281W601-59**
. SERVICE BULLETIN .
5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 2
GE Proprietary Information – subject to the restrictions on the cover or first page B. Reason
(1) Condition conversion corrects The ELMS panels are unable to provide power for Fuel Scavenge system.
(2) Extent condition encountered Boeing 777-200, F, -200LR, -300 and -300ER.
(3) Expected benefits of conversion The ELMS panels will be able to provide power for the Fuel Scavenge System.
C. Description The conversion requires the installation of a single 22 AWG wire between SIU 2 and connector D11007.
The GE part number and Boeing part number remain unchanged as a result of this work.
D. Compliance Optional – Service Bulletin to revise functionality.
E. Approval The repairs and modifications herein are minor per 14 CFR 21.93/CS 21.93 and comply with the applicable regulations and are on record with the supplier as FAA-approved, by process via 14 CFR 21.95/CS 21.95.
F. Manpower The incorporation of this work will take approximately 1 man hour excluding testing.
G. Material and Availability For details of the materials required to embody this conversion, refer to paragraph 3 of this Service Bulletin.
H. Re-identified Parts None.
I. Tooling Required In addition to the standard airplane electrical wiring tools, the following specialist tooling (or equivalent) is required:
(1) Crimp Plier, part number M22520/1-01.
(2) Crimp Plier, part number M22520/2-01.
(3) Insertion/Extraction Tool, part number M81969/14- 01 (Green/White).
(4) Insertion/Extraction Tool, part number M81969/14-10 (Red/Orange).
(5) Positioner, part number M22520/1-02.
(6) Positioner, part number M22520/2-07.
. SERVICE BULLETIN .
5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 3
GE Proprietary Information – subject to the restrictions on the cover or first page J. Weight and Balance Not affected.
K. Electrical Load Data Not changed.
L. Reference
(1) BCAG Aircraft Maintenance Manual (AMM).
(2) Boeing Service Bulletin 777-28-0078 (Line Numbers 423, 429 and 454 to 1098)
(3) Boeing Service Bulletin 777-28-0083 (Line Number 1099 and on) M. Other Publications Affected None.
SERVICE BULLETIN SEE (A
MAIN EQUIPMENT CENTER ACCESS DOOR, 117AL FWD
LEFT POWER
MANAGEMENT MAIN EQUIPMENT CENTER PANEL, P110 SEE P110 Left Power Management Panel (Left Hand Door not illustrated) P110 Power Management Panel Figure 1 5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 4 GE Proprietary Information - subject to the restrictions on the cover or first page
ув
SERVICE BULLETIN Front DM24505C DM24504A DM24505B DM24504B DM24505A DM24504C SIU2 M24505 SIU 1 M24504 -A View behind louvered panel, View with louvered panel removed, from underneath from front J07 D11007 0000 0000001000100
CAUTION
ASSEMBLY CONTAINS ESDS Typical Cabinet Assembly Figure 2 5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 5 GE Proprietary Information - subject to the restrictions on the cover or first page
. SERVICE BULLETIN .
5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 6
GE Proprietary Information – subject to the restrictions on the cover or first page
Fuel Scavenge System Figure 3
. SERVICE BULLETIN .
5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 7
GE Proprietary Information – subject to the restrictions on the cover or first page
2. ACCOMPLISHMENT INSTRUCTIONS WARNINGS: FAILURE TO FOLLOW THE APPLICABLE INSTRUCTIONS GIVEN IN THIS PUBLICATION AS AMENDED BY GE REVISIONS MAY ENDANGER SAFETY.
THIS DOCUMENT ONLY COVERS IMPLEMENTATION OF THE REFERENCED CHANGE. IT DOES NOT ADDRESS PRE OR POST-IMPLEMENTATION TASKS.
TO ENSURE THE SAFETY OF PERSONNEL IMPLEMENTING THE WORK,
REFERENCE MUST BE MADE TO ALL INSTRUCTIONS REGARDING SAFETY RELATED PROCEDURES (E.G. POWER DOWN) DETAILED IN THE AIRCRAFT MAINTENANCE MANUAL.
YOU MUST CONSULT AND OBEY THE MANUFACTURER’S OR SUPPLIER’S SAFETY DATA SHEET (SDS) FOR ANY OF THE MATERIALS THAT YOU USE.
CAUTION: DURING THIS CONVERSION ALL CIRCUIT BREAKER RETAINING NUTS ,
CIRCUIT BREAKER TERMINAL SCREWS AND CABLE CLAMP PILLAR SCREWS MUST BE TORQUE LOADED. REFER TO THE EMBODIMENT INSTRUCTIONS THAT FOLLOW FOR SPECIFIC TORQUE REFERENCES.
NOTES: 1. During the embodiment of this Service Bulletin most labels that are to be fitted must be positioned in the same location as the old label they are replacing, the old label must be entirely removed. However, labels containing circuit breaker titles and/or bus information may be placed over the existing label if necessary.
2. During the embodiment of this Service Bulletin any anti -abrasion tape, lacing tape or heatshrink, which has to be removed, is to be replaced from customers own resources.
A. Embodiment Instructions
(1) Refer to Figure 1 and on the P110 Left Power Management Panel, proceed as follows:
(a) Release the 4 -off fasteners on the Left Hand (LH ) door. Open and engage the LH door stay.
(b) Release the 4-off fasteners on the Right Hand (RH ) door. Open and engage the RH door stay.
(2) Refer to Figure 2 and locate SIU 2 (M24505).
(3) Remove connector DM24505B from SIU 2.
(4) From the conversion kit, select the items that follow:
(a) 22 AWG Wire marked W3145-0761-22, part number 1344-1943-01.
(b) 1-off size 22 contact socket, part number 30-867-6654U.
(5) Refer to Figure 3 and proceed as follows:
(a) Prepare one end of the new wire marked W3145-0761-22.
(b) Using Crimp Plier M22520/2-01 at wire setting 4, together with Positioner M22520/2-07, crimp the size 22 contact socket onto the prepared end of the new wire.
. SERVICE BULLETIN .
5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 8
GE Proprietary Information – subject to the restrictions on the cover or first page
(c) Insert wire, using plastic tool M81969/14-01 green end, into the Connector DM24505B pin 31.
(6) Refer to F igures 2 and 3 . Route the wire marked W3145-0761-22 from the Connector DM24505B to the Connector D11007 noting that the wires MUST be:
(a) Contained within the ORANGE cableform.
(b) Routed INSIDE cable clamps, abrasion resistant tape and lacing tape.
(c) Installed so as not to create unacceptable crossovers with existing wires in the cableform.
NOTE: It will be necessary to loosen the cable clamp arrangements to allow the new wiring to be fed through.
(d) After routing is complete, cut the routed wire to a suitable length to be terminated into Connector D11007.
(7) Refer to Figure 2. L ocate and disconnect the Airplane Interface Connector D11007 at position J07.
(8) From the conversion kit, select the item that follows:
(a) 1-off Size 20 Contact Pin, part number 30-867-6753-01.
(9) Refer to Figure 3 and proceed as follows:
(a) At C onnector D11007 prepare the end of the routed wire marked W3145-0761-22.
(b) Using Crimp Plier M22520/ 1-01 at wire setting 3, together with Positioner M22520/1-02 set to red, crimp the size 20 contact pin at the prepared end of the wire.
(c) Using Insertion Tool M81969/14-10 (Red end), connect the terminated wire W3145-0761-22 into the Connector D11007, contact 7.
(10) Refer to Figure 3. Do the continuity checks that follow:
(a) Make sure there is continuity (i.e. a resistance less than 1 ohm) between the following terminals.
From To D11007 contact 7 DM24505B pin 31
(11) From the conversion kit, select the items that follow:
(a) D11007 Mate-With label, part number ELM850-1.
(12) Refer to Figures 2 and 3 and proceed as follows:
(a) Install the D11007 Mate-With Label onto the new wir ing as close as possible to their termination on Airplane Interface Connector D11007 to identify the new wires incorporated onto the connector.
. SERVICE BULLETIN .
5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 9
GE Proprietary Information – subject to the restrictions on the cover or first page
(13) Make sure that:
(a) All disturbed cable clamp pillar screws are torque loaded to between 35.1 and
42.9 lbf inch (4.0 and 4.8 Nm).
(b) All disturbed circuit breakers are closed.
(c) All disturbed nuts and screws are tightened to relevant torque settings.
(d) All disturbed connectors are reassembled as nec essary and reconnected (DM24505B, D11007).
(e) All cables and splices are securely tied-in to suitable positions.
(f) A full internal cabinet visual inspection is carried out and all debris is removed.
(14) Proceed as follows:
(a) Disengage the LH door stay and close the LH door. Secure the 4-off fasteners on the LH door.
(b) Disengage the RH door stay and close the RH d oor. Secure the 4-off fasteners on the RH door.
(c) Apply ‘tamperproof’ inspection seals to the LH and RH doors as required from customers own resources.
. SERVICE BULLETIN .
5000ELM-28-075 May 06/14 Revision No. 1 Aug 05/14 Page 10
GE Proprietary Information – subject to the restrictions on the cover or first page
(15) Operators may choose one of the three following methods to indicate that the service bulletin work has been completed. Either:
(a) From conversion kit S.B. 5000ELM -28-075A select the Work Carried Out Label marked S.B. 5000ELM-28-075, part number ELM139 -13. Install the Label marked S.B. 5000ELM-28-075 in a convenient position below the Unit Code Label and Modification Label on the front lo wer part of the exterior cabinet frame. Make sure that it is positioned in the same orientation and below any other label(s) which may have been install ed to the cabinet as a result of previous work.
or
(b) From the operators own resources, produce an appropr iate label marked S.B. 5000ELM-28-075. Refer to Figure 4 only as a guide, locally produced labels may vary in size and style. Install this label in a convenient position below the Unit Code Label and Modification Label on the lower part of the exterior cabinet frame. Make sure that it is positioned in the same orientation and below any other label(s) which may have been installed to the cabinet as a result of previous work. Refer to Boeing standard BAC5307 as a guideline for part marking.
or
(c) Using a suitable method, indelibly mark S.B. 5000ELM-28-075 on the front lower part of the exterior cabinet frame. Refer to Boeing standard BAC53 07 as a guideline for part marking.
Work Carried Out Label Figure 4