TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '89f4b559182c8bb67122a2f5a8a8a0b16dc2bd7f8112d0ecf6bcd5190e878074' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '89f4b559182c8bb67122a2f5a8a8a0b16dc2bd7f8112d0ecf6bcd5190e878074' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening
GE PROPRIETARY INFORMATION The information contained in this document is GE proprietary information and is disclosed in con- ¿dence. It is the property of GE and shall not be used, disclosed to others or reproduced without the express written consent of GE, including, but without limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modi ¿cations, spare parts, designs, or con¿guration changes or to obtain FAA or any other government or regulatory approval to do so. If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or in part.
This technical data is considered EAR controlled pursuant to 15 CFR Parts 730-774 respectively.
Transfer of this data by any means to a Non-US Person, whether in the United States or abroad, without the proper U.S. Government authorization (e.g., License, exemption, NLR, etc.), is strictly prohibited.
Copyright (2017) General Electric Company, U.S.A.
September 27, 2017 CF34-BJ S/B 72-0306 PAGE 1 of 12
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening
1. PLANNING INFORMATION A. Effectivity CF34-1A/-3A/-3A1/-3A2/-3B This Service Bulletin is applicable to all CF34-BJ engines that have any fan blade which has been repaired by ATI-UK under SEI-582, 72-21-12, REPAIR 01, REPAIR 02 or REI-13471 or SEI-782, 72-21-12 REPAIR 01, REPAIR 02, or REI-13471 with the serial numbers listed in paragraph 4., A PPENDIX A.
These serial numbers are the best available data.
The fan blades P/N 3901T93G05, P/N 3901T93G06, P/N 4923T52P03, P/N 4923T52P05, P/N 4923T52P06, P/N 4923T52P07, P/N 4923T52P13, P/N 4923T52P14, P/N 4923T56G02, P/N 4923T56G04, P/N 4923T56G05, P/N 4923T56G06, P/N 4923T56G07, P/N 4923T56G08, P/N 4923T56G09, P/N 4923T56G10, P/N 4923T56G11, P/N 4923T56G12, P/N 4923T56G13, P/N 4923T56G14, P/N 5922T34P01, P/N 6018T30P03, P/N 6018T30P05, P/N 6018T30P06, P/N 6018T30P07, P/N 6018T30P13, P/N 6018T30P14, and P/N 6018T30P15 are affected by this Service Bulletin.
B. Description This Service Bulletin provides instructions for the removal of speci ¿c fan blades or ¿eld modi ¿ed fan blades listed in paragraph 4., A PPENDIX A.
C. Compliance Category 2 GE recommends that you do this Service Bulletin as soon as possible without effect on revenue service but no later than the ¿rst overnight maintenance period after identifying an affected fan blade. Operators may exercise a deferment as described in paragraph 3., A CCOMPLISHMENT INSTRUCTIONS of this Service Bulletin.
Paragraph 4., A PPENDIX A lists the suspect fan blades which have been repaired by ATI-UK under SEI-582, 72-21-12, REPAIR 01, REPAIR 02, and REI-13471 or SEI-782, 72-21-12, REPAIR 01, REPAIR 02, and REI-13471. Operators should complete a review of their records for this subgroup no later than 14 days from the issuance of this Service Bulletin. Any fan blade found in a record search should be removed from revenue service at the next overnight maintenance period or from ready to install spares. Operator has the discretion to perform the repair per CF34-BJ S/B 72-0123.
Impact B This recommendation is to address a condition that may result in an increased Rate of In-Flight Shutdowns (IFSD), T ake-Off Aborts (TOA), Air Turn Backs (ATB) or Diversions (DIV).
NOTE: This Service Bulletin can be done on wing or in shop.
September 27, 2017 CF34-BJ S/B 72-0306 PAGE 2 GE PROPR IETARY INFORMATION - Subject to the restrictions on the cover or ¿rst page.
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening This Service Bulletin is offered to improve the reliability or performance of your GE product, or to help prevent the occurrence of the event or condition described in this Service Bulletin. If the operator elects not to participate in the bulletin, that decision will be taken into consideration by GE in evaluating future product performance issues that may arise in the operator’s Àeet.
D. Concurrent Requirements None.
E. Reason
(1) Objective:
T o remove parts from service and reduce signi ¿cant events.
(2) Condition:
A subset of fan blades in the ¿eld are suspected to have missing lance peening after performing a hot form repair (refer to SEI-582, 72-21-12, REPAIR 01, REPAIR 02 or REI-13471 or SEI-782, 72-21-12 REPAIR 01, REPAIR 02, or REI-13471) at ATI-UK between 2007 and 2009.
(3) Cause:
Shot peening is used in production to improve the compressive residual stress and mechanical properties of the fan blade tangs, including the fan blade pin holes, by placing a compressive residual stress in the fan blade pin holes.
Fan blades can lose their compressive residual stress during the electron beam weld repair (REPAIR 01), hot form repair (REPAIR 02) stress relief, or REI-13471. The loss of mechanical properties is restored with the lance peening called out in the electron beam weld and hot form repair. During an audit, GE Aviation has identi ¿ed the fan blades listed in paragraph 4., APPENDIX A as suspect to have missing lance peening.
(4) Improvement:
Removal or repair of the suspect fan blades listed in paragraph 4., A PPENDIX A will eliminate the possibility of cracking in the fan blade tangs and/or fan blade pin holes due to missing lance peening.
(5) Substantiation:
Substantiation is by analysis and Àeet experience.
F. Approval The data contained in this Service Bulletin has been reviewed by the FAA or authorized entity representing the FAA and the repair(s) and modi ¿cation(s) herein comply with the applicable Aviation Regulations and are APPROVED for installation in the model(s) listed in this Service Bulletin.
September 27, 2017 CF34-BJ S/B 72-0306 PAGE 3 GE PROPR IETARY INFORMATION - Subject to the restrictions on the cover or ¿rst page.
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening G. Manpower After you get access to the fan blades, you will need approximately 2 man-hours for each engine.
H. Weight and Balance Weight and balance are not changed.
I. References (Use the latest version of these documents) CF34 Turbofan Engine Service Record SEI-580, CF34-BJ Maintenance Manual (MM) SEI-581, CF34-BJ-1A_3A_3A2 Engine Illustrated Parts Catalog (IPC) SEI-582, CF34-BJ Shop Manual (SM) SEI-779, CF34-BJ Engine Illustrated Parts Catalog (IPC) SEI-780, CF34-BJ Service Manual (SM) SEI-782, CF34-BJ Heavy Maintenance Manual (HMM) CF34-BJ S/B 72-0123, ENGINE - General (72-00-00) - Introduction of Fan Blade Bushing Repair Repair Engineering Instruction (REI)-13471, Airfoil Repair by Hot Reforming and by Electron Beam Welding NOTE: The reference documents listed below are for the engine manufacturer's internal use only:
BPP/EPEX No.: 63014 J. Publications Affected None.
K. Interchangeability Not applicable.
L. Software Accomplishment Summary Not applicable.
2. MATERIAL INFORMATION A. Material - Price and Availability September 27, 2017 CF34-BJ S/B 72-0306 PAGE 4 GE PROPR IETARY INFORMATION - Subject to the restrictions on the cover or ¿rst page.
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening
(1) Parts necessary to do this Service Bulletin:
Part Number Qty/ Eng Part Name Unit ($) Price Pkg Qty Lead Time Days 6018T30P15 (AR) Blade, Fan Quote (-) Quote NOTE: Prices are provided for planning purposes and are subject to change.
(2) Other Spare Parts:
Part Number Qty/ Eng Part Name Unit ($) Price Pkg Qty Lead Time Days 4029T16P17 (AR) Pin, Fan Blade Retaining Quote (-) Quote NOTE: Prices are provided for planning purposes and are subject to change.
(3) Consumables:
None.
B. Industry Support Information None.
C. Con¿guration Chart None.
D. Parts Disposition If the operator elects not to perform a bushing repair in any of his affected fan blades as speci ¿ed in step 3.A.(1)(b), it must be returned to GE Aviation. Submit a Service Request (SR) case to GE Aviation Fleet Support to obtain a case number to be used when shipping the fan blades to GE Aviation.
Fleet Support:
E-mail (USA): aviation. Àeetsupport@ge.com E-mail (China & Asia): aviation. Àeetsupport.cn@ge.com U.S.A. Phone: 877-432-3272 International Phone: (513) 552-3272 China & Asia Phone: +86 21 38777666 E. Tooling - Price and Availability None.
September 27, 2017 CF34-BJ S/B 72-0306 PAGE 5 GE PROPR IETARY INFORMATION - Subject to the restrictions on the cover or ¿rst page.
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening
3. ACCOMPLISHMENT INSTRUCTIONS A. General
(1) Access the fan rotor section and remove the fan blade retaining pins and fan blades listed in paragraph 4., A PPENDIX A. Refer to SEI-580, 72-20-00, REMOVAL/INSTALLATION or SEI-582, 72-21-00, DISASSEMBLY or SEI-780, 72-00-00, MAINTENANCE PRACTICE 36 or SEI-782, 72-00-00, SPECIAL PROCEDURE 11 or 72-00-01, DISASSEMBLY 02 or 72-00-21, REMOVAL or 72-21-00, DISASSEMBLY and do as follows:
NOTE: T h i ss t e pm u s tb ed o n ea tt h e ¿rst overnight maintenance interval after you identify an affected fan blade that is in service.
(a) Return all affected fan blades to GE Aviation or continue with step
3.A.(1)(b).
OR
(b) After you remove the fan blade from service, repair the fan blade as speci¿ed in CF34-BJ S/B 72-0123 at operator’s convenience.
NOTE: CF34-BJ S/B 72-0123 introduces a fan blade bushing repair by a controlled cold expansion procedure, approved by GE Aviation, that extends the permitted fan blade operation by an additional 18,000 cycles from the time of the repair.
(c) Install the new fan blades and the new fan blade retaining pins again. Refer to SEI-580, 72-20-00, REMOVAL/INSTALLATION or SEI-582, 72-21-00, ASSEMBLY or SEI-780, 72-00-00, MAINTENANCE PRACTICE 36 or SEI-782, 72-00-00, SPECIAL PROCEDURES 11 or 72-00-01, ASSEMBLY 02 or 72-00-21, INSTALLATION or 72-21-00, ASSEMBLY and do as follows:
1 Make sure that there is suf ¿cient clearance between the fan blade and the containment case and correct it if necessary.
NOTE: It is recommended that the fan blade retaining pins P/N 4029T16P17 are installed with the new fan blades P/N 6018T30P15. It is necessary to engage the new fan blade retaining pins in even pairs (new pin plus the pin 180 degrees away) to prevent an increase in vibration.
B. Alternative Procedure NOTE 1: This alternative procedure is recommended only if the affected engine is outstation or a replacement fan blade(s) is not immediately available.
(1) Do a visual and tactile inspection of the fan containment case abradable rub strip for continuous 360-degree rub indication (Figure 1) with material removal at the compliance requirement speci ¿ed in paragraph 1.C., C ompliance.D o the reinspections at a maximum interval of 50 cycles or 75 hours (whichever occurs last) and do as follows:
September 27, 2017 CF34-BJ S/B 72-0306 PAGE 6 GE PROPR IETARY INFORMATION - Subject to the restrictions on the cover or ¿rst page.
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening NOTE 2: The reinspection can be done a maximum of three times after an affected fan blade is identi ¿ed to let you procure a replacement fan blade and/or reposition the aircraft to a maintenance base.
(a) Access the engine inlet with a direct line of sight to the fan containment case abradable rub strip and do as follows.
1 Do a visual inspection of the abradable rub strip for a continuous 360-degree rub indication with material removal.
2 If necessary, turn the fan to see all areas. Move your ¿nger across the abradable rub strip to do an inspection for removed material.
(b) If there is no indication or only discontinuous surface marks are present, continue with the reinspections as speci ¿ed in step 3.B.(1) at an interval of not more than 50 cycles or 75 hours (whichever occurs last).
NOTE: The reinspection can be done a maximum of three times after an affected fan blade is identi ¿ed.
(c) If you ¿nd continuous indications, do step 3.B.(2). Refer to SEI-580, 72-00-00, INSPECTION or SEI-582, 72-23-00, INSPECTION or SEI-780, 72-00-00, INSPECTION or SEI-782, 72-23-00, INSPECTION for abradable rub strip serviceable limits. If the abradable damage is beyond serviceable limits, repair the abradable damage within 500 additional Àight hours. Refer to SEI-580, 72-20-00, REPAIR, REPAIR-06 or SEI-582, 72-23-00, REPAIR, REPAIR-03 or SEI-782, 72-23-00, REPAIR-03 for the red abradable rub strip or SEI-580 72-20-00, REPAIR, REPAIR-18 or SEI-582, 72-23-11, REPAIR 19 or SEI-782, 72-23-00, REPAIR 15 for the gray abradable rub strip. If you ¿nd punctures or gouges in the aluminum skin under the abradable rub strip, refer to SEI-580, 72-00-00, INSPECTION or SEI-582, 72-23-00, INSPECTION or SEI-782, 72-23-00, INSPECTION for repair instructions.
(2) Access the fan rotor section and remove the identi ¿ed affected fan blade.
Refer to SEI-580, 72-20-00, REMOVAL/INSTALLATION or SEI-582, 72-21-00, DISASSEMBLY or SEI-780, 72-00-00, MAINTENANCE PRACTICE 36 or SEI-782, 72-00-00, SPECIAL PROCEDURE 11 or 72-00-01, DISASSEMBLY 02 or 72-00-21, REMOVAL or 72-21-00, DISASSEMBLY .
(3) Install the new fan blades and the new fan blade retaining pins again. Refer to SEI-580, 72-20-00, REMOVAL/INSTALLATION or SEI-582, 72-21-00, ASSEMBLY or SEI-780, 72-00-00, MAINTENANCE PRACTICE 36 or SEI-782, 72-00-00, SPECIAL PROCEDURES 11 or 72-00-01, ASSEMBLY 02 or 72-00-21, INSTALLATION or 72-21-00, ASSEMBLY and do as follows:
(a) Make sure that there is suf ¿cient clearance between the fan blade and the containment case and correct it if necessary.
NOTE: It is recommended that the fan blade retaining pins P/N 4029T16P17 are installed with the new fan blades P/N 6018T30P15. It is necessary to engage the new fan blade retaining pins in even pairs (new pin plus the pin 180 degrees away) to prevent an increase in vibration.
September 27, 2017 CF34-BJ S/B 72-0306 PAGE 7 GE PROPR IETARY INFORMATION - Subject to the restrictions on the cover or ¿rst page.
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening C. CF34 Turbofan Engine Service Record Entry
(1) Report the fan blades found to any of the contacts that follow from GE Aviation Fleet Support (reference CF34-BJ S/B 72-0306):
E-mail (U.S.A): Aviation. Àeetsupport@ge.com E-mail (China & Asia): aviation. Àeetsupport.cn@ge.com U.S.A. Phone: (513) 552-3272 International Phone: (513) 552-3272 China & Asia Phone: +86 21 38777666
(a) Include engine serial number (ESN), time since new (TSN), cycles since new (CSN), fan blade part number(s), and fan blade serial number(s).
NOTE: GE Aviation Fleet Support will notify product support engineering (PSE) of the ¿nds/compliance information sent in.
(2) Make an entry in the CF34 Turbofan Engine Service Record as follows:
(a) Record compliance to this Service Bulletin in the Engine Service Record, Section II (Service Bulletins) and do as follows:
1 Include ESN, TSN, CSN, fan blade part number(s), and fan blade serial number(s).
(b) Send a copy of the compliance entry data to:
GE Aviation 1000 Western Avenue Lynn, MA 01910 U.S.A.
ATTN.: Lynn Product Data Center, MZ 264X7 CF34 Service Bulletin Coordinator September 27, 2017 CF34-BJ S/B 72-0306 PAGE 8 GE PROPR IETARY INFORMATION - Subject to the restrictions on the cover or ¿rst page.
CF34 TURBOFAN (BUSINESS JET) GE Aircraft Engines
SERVICE BULLETIN ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening
FAN BLADE
AREA TO BE
INSPECTED 5043395-00 Fan Containment Case Inspection Figure 1, ( Sheet 1 of 2) September 27, 2017 CF34-BJ S/B 72-0306 PAGE 9 GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
CF34 TURBOFAN (BUSINESS JET) GE Aircraft Engines
SERVICE BULLETIN ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening
FAN BLADE
FAN CASE
• AREA TO BE
INSPECTED 5043396-00 Fan Containment Case Inspection Figure 1, ( Sheet 2) September 27, 2017 CF34-BJ S/B 72-0306 PAGE 10 GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening
4. APPENDIX A T able 1. Affected Serial Numbers of the Fan Blades Serial Number Serial Number Serial Number Serial Number Serial Number Serial Number BA200220 KGABE426 KGACG710 KGAGB116 MAD10286 MAE42665 BA256679 KGABF382 KGACH423 KGAGB284 MAE32257 MAE43187 BA309195 KGABF383 KGACJ026 KGAGB357 MAE32373 MAE43737 BA489838 KGABF489 KGACJ113 KGAGB550 MAE32776 MAE44381 BA662584 KGABG187 KGACJ256 KGAGB556 MAE32979 MAE44382 BA663010 KGABH211 KGACJ339 KGAGC763 MAE33217 MAE44818 BA683308 KGABH423 KGACJ652 KGAGC765 MAE33381 MAE45089 BA683759 KGABJ587 KGACJ655 KGAGC822 MAE33386 MAE45127 BA698133 KGABJ865 KGACJ686 KGAGC823 MAE33421 MAE45168 BA698362 KGABM950 KGACJ761 KGAGC826 MAE33506 MAE45242 BA698592 KGABN395 KGACJ781 KGAGD838 MAE33536 MAE45436 BA727675 KGABP153 KGACK214 KGAGF007 MAE33555 MAE45487 BA727681 KGABP223 KGACL342 KGAJ1662 MAE33632 MAE45513 BA879643 KGABR498 KGACM579 KGAJ1983 MAE33717 MAE45549 BA879645 KGABR930 KGACM61 KGAJ2526 MAE33746 MAE45559 BB104269-C KGABR933 KGACN024 KGAJ3481 MAE38461 MAE45601 BB308730-Y KGABT756 KGACP476 KGAJ3580 MAE38556 MAE45605 DA316476 KGABT780 KGACP627 KGAJ4288 MAE38582 MAE45724 KGA81805 KGABU050 KGACR351 KGAJ4981 MAE38991 MAE45769 KGA82097 KGABU057 KGACR754 KGAJ9582 MAE39057 MAE45781 KGA82487 KGABU059 KGACS814 KGAK0264 MAE39447 MAE45989 KGA82812 KGABU153 KGACT275 KGAK0437 MAE39574 MAE46061 KGA93293 KGABU160 KGACT638 KGAK0742 MAE39625 MAE46388 KGABA101 KGABV741 KGACT706 KGAK0759 MAE39627 MAE46430 KGABA212 KGABW559 KGACT838 KGAK1992 MAE39646 MAE46654 KGABA404 KGABW619 KGACT960 KGAK2064 MAE39674 MAE46976 KGABA424 KGABW790 KGACT969 KGAK2536 MAE39679 MAE46987 KGABA471 KGABW865 KGACU100 KGAK4364 MAE39692 MAE47652 September 27, 2017 CF34-BJ S/B 72-0306 PAGE 11 GE PROPR IETARY INFORMATION - Subject to the restrictions on the cover or ¿rst page.
ENGINE - Fan Rotor Assembly (72-21-00) - Replacement of Fan Blades with Missing after-Repair Lance Peening Serial Number Serial Number Serial Number Serial Number Serial Number Serial Number KGABA483 KGABY078 KGACU116 KGAK4443 MAE39914 MAE47766 KGABA484 KGABY754 KGACU685 KGAK4622 MAE40019 MAE47907 KGABA485 KGABY844 KGACV266 KGAK5679 MAE40173 MAE47942 KGABA486 KGACB633 KGACW215 KGAK6257 MAE40634 MAE48137 KGABA489 KGACB654 KGACW513 KGAK6581 MAE40993 MAE48647 KGABA747 KGACB754 KGACW567 KGAK7804 MAE41153 MAE48825 KGABB308 KGACC718 KGACW771 KGAK7813 MAE41367 MAE48899 KGABC152 KGACC790 KGACY111 KGAK7913 MAE41485 MAE48904 KGABC471 KGACC972 KGACY514 KGAK8310 MAE42112 MAE49112 KGABC545 KGACD678 KGACY970 KGAK9370 MAE42318 MAE60227 KGABD151 KGACE429 KGADW416 KGAR2374 MAE42368 MAE60678 KGABD174 KGACF134 KGAG0838 KGAR3200 MAE42457 -- KGABD640 KGACF765 KGAGA109 KGAR4727 MAE42514 -- KGABE093 KGACG331 KGAGA852 KGAR5704 MAE42525 -- September 27, 2017 CF34-BJ S/B 72-0306 PAGE 12 GE PROPR IETARY INFORMATION - Subject to the restrictions on the cover or ¿rst page.