Copy · GE Service Bulletin 72-0341_Rev 2 · 13 pages

© General Electric Company. Filed by the FAA in regulations.gov docket FAA-2024-1885, the docket of AD 2025-14-03. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '5b0b4298753a5d347f9bcde50da3aef1e3106a3f1873497c1896561b682f4423'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

CF34-10E Service Bulletins (SBs) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal Date Printed:

2022/10/31 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 1 of 13 CF34-10E SERVICE BULLETIN - 72-0341 R02 Revised:09/24/2021 SB 72-0341 R02 ENGINE - HIGH PRESSURE TURBINE ROTOR ASSEMBLY (72-52-00) -

INSPECTION OF HPT FRONT ROTATING AIR SEAL Issued:

03/29/2018 GE Designated: -CONFIDENTIAL- The information contained in this document is GE proprietary information and is disclosed in confidence. It is the property of GE and shall not be used, disclosed to others or reproduced without the express written consent of GE, including, but without limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modifications, spare parts, designs, or configuration changes or to obtain FAA or any other government or regulatory approval to do so. If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or part.

This technical data is considered subject to the Export Administration Regulations (EAR) pursuant to 15 CFR Parts 730-774. Transfer of this data by any means to a Non-U.S. Person, whether in the United States or abroad, without the proper U.S.

Government authorization (e.g., License, exemption, NLR, etc.), is strictly prohibited.

Copyright (2021) General Electric Company, U.S.A.

TRANSMITTAL INFORMATION REVISION 2 TO SERVICE BULLETIN 72-0341 Revision 2 is issued to update paragraph 3., .ACCOMPLISHMENT INSTRUCTIONS Revision 1 was issued May 12, 2020. The original was issued March 29, 2018. Revision bars in the left margin identify changes.

1. PLANNING INFORMATION A. Effectivity * * * CF34-10E This Service Bulletin is applicable to these CF34-10E engines:

*CF34-10E engines, serial numbers 994111 through 994999 and 424101 and up.

These serial numbers are the best available data.

This Service Bulletin is applicable to all CF34-10E engines that have installed the high pressure turbine (HPT) front rotating air seals P/N , P/N 1865M49P04 , and P/N . This includes any engines affected by CF34-10E2448M30P02 2448M30P03 S/B .72-0347 B. Description This Service Bulletin provides additional inspection procedures for the affected HPT front rotating air seals.

In addition, this Service Bulletin provides instructions to replace the affected HPT rotor disk with a new or serviceable HPT rotor disk if the focused fluorescent penetrant inspection (FPI) reveals indications that extend beyond rabbet diameter M.

C. Compliance Category 4 GE recommends that you do this Service Bulletin when the HPT rotor assembly is exposed.

Impact A This recommendation is to address a condition that may affect Flight Safety.

NOTE:This Service Bulletin can be accomplished in shop.

This Service Bulletin is offered to improve the reliability or performance of your GE product, or to help prevent the occurrence of the event or condition

CF34-10E Service Bulletins (SBs) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal Date Printed:

2022/10/31 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 2 of 13 described in this Service Bulletin. If the operator elects not to participate in the bulletin, that decision will be taken into consideration by GE in evaluating future product performance issues that may arise in the operator's fleet.

D. Concurrent Requirements None.

E. Reason

(1) Objective:

To improve reliability and remove parts from service.

(2) Condition:

The HPT front rotating air seals P/N and P/N have been found with1865M49P04 2448M30P02 cracking out of the rabbet where the part interacts with the HPT rotor disk P/N .1865M51P03 To date, two HPT front rotating air seals have been found with this condition.

The fielded parts have been found with cracking out of the rabbet where the part interacts with the HPT rotor disk. To date, two parts have been found with this condition.

(3) Cause:

The crack initiation location is not always exposed or inspected when the module is exposed at shop visits.

(4) Inspection:

This Service Bulletin is intended to add an FPI of rabbet diameter M for the HPT front rotating air seal when the HPT rotor assembly is exposed.

(5) Substantiation:

Substantiation is by fleet experience.

F. Approval This Service Bulletin contains no modification information that revises the approved configuration and therefore does not require FAA or regulatory approval.

G. Manpower After you get access to the HPT front rotating air seal, you will need approximately 1 man-hour for each engine or component.

H. Weight and Balance Weight and balance are not changed.

I. References (Use the latest version of these documents) CF34 Turbofan Engine Service Record GEK 9250, Commercial Engine Standard Practices Manual (SPM) GEK 112081, CF34-10E Engine Manual (EM) GEK 112082, CF34-10E Illustrated Parts Catalog (IPC) CF34-10E S/B , ENGINE - High Pressure Turbine Rotor Assembly (72-52-00)72-0347

- HPT Front Rotating Air Seal Correction Plan J. Publications Affected GEK 112081, CF34-10E Engine Manual (EM) K. Interchangeability Not applicable.

L. Software Accomplishment Summary Not applicable.

2. MATERIAL INFORMATION A. Material - Price and Availability

(1) Parts necessary to do this Service Bulletin:

None.

(2) Other Spare Parts:

Part Number Qty/ Eng Part Name Unit ($) Price Pkg Qty Lead Time Days 2448M30P02 (1) Rotating Air Seal, High Pressure 235,400.00 (1) 5 OR 2448M30P03 (1) Rotating Air Seal, High Pressure Quote (-) Quote 1865M51P03 (1) Disk, High Pressure Turbine Rotor Quote (-) Quote OR 1865M51P04 (1) Disk, High Pressure Turbine Rotor 260,000.00 (1) 5 NOTE:Prices are provided for planning purposes and are subject to change.

(3) Consumables:

CF34-10E Service Bulletins (SBs) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal Date Printed:

2022/10/31 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 3 of 13 None.

B. Industry Support Information Contact your Customer Support Manager (CSM). Refer to D-0633, Incremental 1.

C. Configuration Chart None.

D. Parts Disposition None.

E. Tooling - Price and Availability None.

3. ACCOMPLISHMENT INSTRUCTIONS A. General NOTE:This procedure gives additional inspections to be done on the HPT front rotating air seal ( when you get access to the HPT rotor assembly.Figure 1) B. Aft Rabbet Diameter Inspection of HPT Front Rotating Air Seal

(1) Do an FPI of the HPT front rotating air seal. Refer to and do as follows:Figure 2

(a) Clean the HPT front rotating air seal. Refer to GEK 112081, 72-52-08, CLEANING 001.

(b) Before you do the FPI, swab etch the rabbet diameter M. Refer to GEK 9250, 70-24-01, SWAB ETCHING PROCEDURE and do as follows:

1 Use Class C etchant.

(c) Do a focused Class G FPI of the boltholes. The boltholes are a very important area.

Refer to GEK 9250, 70-32-02, FLUORESCENT PENETRANT INSPECTION.

(d) Do a Class G FPI of the remaining areas of the HPT front rotating air seal. Refer to GEK 9250, 70-32-02, FLUORESCENT PENETRANT INSPECTION.

(e) Examine the very important areas of the HPT front rotating air seal. The very important areas are the bore, inducer holes, rabbet fillets, and retainer rabbet fillets.

(f) Do a focused Class G FPI of the rabbet diameter M. Refer to GEK 9250, 70-32-02, FLUORESCENT PENETRANT INSPECTION or 70-32-03, SPOT-FLUORESCENT-PENETRANT INSPECTION and do as follows:

1 Use non-aqueous wet developer (NAWD).

NOTE:Shops can use the method that best provides detectability for small indications.

(g) Indications that are more than 0.015 in. (0.38 mm) are not permitted. If you find indications that are more than 0.015 in. (0.38 mm), replace the HPT front rotating air seal. Refer to GEK 112081, 72-52-00, DISASSEMBLY 001 and ASSEMBLY 001.

(h) Linear indications are not permitted. If you find linear indications, replace the HPT front rotating air seal. Refer to GEK 112081, 72-52-00, DISASSEMBLY 001 and ASSEMBLY

001.

NOTE:Linear indications are indications that are four times longer than they are in width.

(i) If there are indications that extend more than the rabbet diameter M, refer to Figure and do as follows:4 1 Discard the HPT rotor disk.

2 Replace the HPT rotor disk with a new or serviceable HPT rotor disk.

NOTE:Figure 5, and show typical focused FPI indications onFigure 7, Figure 8 rabbet diameter M and shows typical fretting on rabbet diameter M.Figure 6

(j) Do an eddy current inspection of the bore surfaces of the HPT front rotating air seal.

Refer to GEK 112081, 72-52-08, INSPECTION 001, Subtask 72-52-08-250-004 through Subtask 72-52-08-250-005.

C. Deleted D. Service Record Entry

(1) Make an entry in the CF34 Turbine Engine Service Record as follows:

(a) Record compliance to this Service Bulletin in the Engine Service Records, Section II (Service Bulletins).

(b) Send all important indication findings to the current CF34-10 HPT Fleet Engineer.

Page 4OCROpen in PDF

CF34-10E Service Bulletins (SBs) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal —SURF. L DIM. AG - -DIM. N SEAL

AIR TEETH RETAINER BLADE

HOLES AREA

BOLT DIA M "HOLES

DIAL DIAM DIA G DIA R

DIALE SEAL

BORE TOOTH +

SEAL TEETH DAD DIA B

HPT FRONT

ROTATING FORWARD MOUNTING FLANGE AFT MOUNTING FLANGE

AIR SEAL (DOES NOT INCLUDE FILLET (DOES NOT INCLUDE

NEXT TO DIA DI FILLET NEXT TO DIA B) BORE• *BORE FACE FACE -SURF. A SURF. C→ B-B 5050579-00 HPT Front Rotating Air Seal Figure 1 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2022/10/31 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 4 of 13 [Person, without USG authorization, is strictly prohibited.

Page 5OCROpen in PDF

CF34-10E Service Bulletins (SBS) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal

RETAINER

RABBET FILLET

INDUCER HOLE RABBET

FILLETS -BOLTHOLE BORE 5050577-00 FPI of the HPT Front Rotating Air Seal Figure 2 (Sheet 1) PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2022/10/31 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 5 of 13 Person, without USG authorization, is strictly prohibited.

Page 6OCROpen in PDF

CF34-10E Service Bulletins (SBs) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal ZONE E ZONE G ZONE G ZONE E

INDUCER HOLE ZONE F ZONE G ZONE E ZONE G

- BOLTHOLE ZONE F ZONE F NOTES:

1. DIFFERENT ZONES ARE DEFINED AS FOLLOWS:

ZONE E:

ZONE F:- ZONE G:

2. THESE ZONES DO NOT APPLY INSIDE THE INDUCER HOLE AND THE BOLTHOLE.

3. ZONE F APPLIES BETWEEN THE INDUCER HOLES IN THE CIRCUMFERENTIAL DIRECTION AND BETWEEN THE BOLTHOLES IN THE CIRCUMFERENTIAL DIRECTION. 5050576-00 FPI of the HPT Front Rotating Air Seal Figure 2 (Sheet 2) GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2022/10/31 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 6 of 13 Person, without USG authorization, is strictly prohibited.

Page 7OCROpen in PDF

CF34-10E Service Bulletins (SBs) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal

FIGURE DELETED 99de0011 Deleted Figure 3 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2022/10/31 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 7 of 13 [Person, without USG authorization, is strictly prohibited.

Page 8OCROpen in PDF

CF34-10E Service Bulletins (SBs) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal B

HPT FRONT _ ROTATING

AIR SEAL B-B 6009727-00 Interpretation of Linear Indications for Diameter M Figure 4 (Sheet 1) GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2022/10/31 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 8 of 13 Person, without USG authorization, is strictly prohibited.

Page 9OCROpen in PDF

CF34-10E Service Bulletins (SBS) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating

LINEAR INDICATIONS

RETAINER RABBET

FILLET DIA M 6 4 5

RETAINER AFT FACE INDICATION LINEAR CASE DESCRIPTION REPLACE HPT ROTOR DISK?

LINEAR INDICATIONS

EXTEND BEYOND 1 DIA M INTO THE RETAINER YES

AFT FACE 2 NO

LINEAR INDICATIONS

DO NOT EXTEND NO

BEYOND DIA M 4 NO 5 NO 6 NO

LINEAR INDICATIONS 7 EXTEND BEYOND YES

DIA MINTO THE RETAINER

RABBET FILLET 6009728-00 Interpretation of Linear Indications for Diameter M Figure 4 (Sheet 2) GE PROPRIETARY INFORMATION - Not to be used, disclosed to others Date Printed: reproduced without the express written consent of GE. Technical data Page 2022/10/31 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 9 of 13 Person, without USG authorization, is strictly prohibited.

Page 10OCROpen in PDF

CF34-10E Service Bulletins (SBs) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal DIA M 6009277-00 Typical Focused FPI Indigations on Rabbet Diameter M GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2022/10/31 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 10 of 13 [Person, without USG authorization, is strictly prohibited.

Page 11OCROpen in PDF

CF34-10E Service Bulletins (SBS) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal 6009278-00 Typical Fretting on Rabbet Diameter M Figure 6 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2022/10/31 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 11 of 13 [Person, without USG authorization, is strictly prohibited.

Page 12OCROpen in PDF

CF34-10E Service Bulletins (SBS) SB 72-0341 R02 ENGINE - High Pressure Turbine Rotor Assembly (72-52-00) - Inspection of HPT Front Rotating Air Seal 6028185-00 Typical Focused FPI Linear Indication on Rabbet Diameter M Observed With 10x Magnification Figure 7 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2022/10/31 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 12 of 13 [Person, without USG authorization, is strictly prohibited.

Pages 13–13 of 13