TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'faaacc96629f1ed2d9ec8e0b04f70509d1cc602fd667195f7eec2ed5027685ca' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'faaacc96629f1ed2d9ec8e0b04f70509d1cc602fd667195f7eec2ed5027685ca' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
GEnx-2B Service Bulletins (SBs) SB 73-0089 R01 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 Date Printed:
2021/01/12 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.
Page 1 of 35 GEnx-2B SERVICE BULLETIN - 73-0089 R01 Revised:01/11/2021 SB 73-0089 R01 ENGINE FUEL AND CONTROL - FUEL NOZZLE MANIFOLDS (73-11-40) - TOP MAIN FUEL MANIFOLD AND LOWER FUEL MANIFOLD INSPECTION - POST-GENX-2B S/B 73-0038 Issued:
05/08/2020 GE Designated: -CONFIDENTIAL- The information contained in this document is GE proprietary information and is disclosed in confidence. It is the property of GE and shall not be used, disclosed to others or reproduced without the express written consent of GE, including, but without limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modifications, spare parts, designs, or configuration changes or to obtain FAA or any other government or regulatory approval to do so. If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or part.
This technical data is considered subject to the Export Administration Regulations (EAR) pursuant to 15 CFR Parts 730-774. Transfer of this data by any means to a Non-U.S. Person, whether in the United States or abroad, without the proper U.S.
Government authorization (e.g., License, exemption, NLR, etc.), is strictly prohibited.
Copyright (2021) General Electric Company, U.S.A.
TRANSMITTAL INFORMATION REVISION 1 TO SERVICE BULLETIN 73-0089 Revision 1 is issued to update the attached FST Procedure 2237 and paragraphs 1., , 2., , and 3., .PLANNING INFORMATION MATERIAL INFORMATION ACCOMPLISHMENT INSTRUCTIONS The original was issued May 08, 2020. Revision bars in the left margin identify changes.
1. PLANNING INFORMATION A. Effectivity * * * GEnx-2B67, -2B67B, -2B67/P The redesigned top main fuel manifold P/N and lower fuel manifold2623M71G01 P/N introduced on GEnx-2B engine, serial number 959-521 and up or2619M58G01 installed by GEnx-2B S/B or GEnx-2B S/B are affected by this73-0038 73-0079 Service Bulletin.
B. Description This Service Bulletin provides instructions to do an inspection of the affected top main fuel manifold and lower fuel manifold for cracking adjacent to the support block pads.
NOTE:For on-wing engines, a visual inspection and an ultrasonic inspection are necessary.
NOTE:For in-shop engines, a repetitive inspection is required at every shop visit to perform a visual inspection and fluorescent penetrant inspection (FPI).
C. Compliance Category 2 GE recommends that you do this Service Bulletin as soon as possible without effect on revenue service for engines with redesigned top main fuel manifold and lower fuel manifold that have accumulated 1,700 cycles or more since the first individual installation of the manifold. The cycle counting is accumulated on the top main fuel manifold and the lower fuel manifold since first installation.
On-Wing Requirement A one-time inspection on wing is necessary at all ten support block pad locations for the top main fuel manifold and lower fuel manifold, repetitive inspection for on-wing engines is not required.
GEnx-2B Service Bulletins (SBs) SB 73-0089 R01 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 Date Printed:
2021/01/12 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.
Page 2 of 35 For the top main fuel manifold and/or lower fuel manifold that have 1,700 part cycles since new (PCSN) or more at the issue date of the original of this Service Bulletin, GE recommends completing the accomplishment instructions within 500 cycles from the issue date of the original of this Service Bulletin.
For the top main fuel manifold and/or lower fuel manifold that have less than 1,700 PCSN at the issue date of this Service Bulletin, they must be inspected before the top main fuel manifold and lower fuel manifold reach 2,200 cycles since first installation.
NOTE:Deleted.
NOTE:Deleted.
NOTE:Deleted.
NOTE:Deleted.
NOTE:For on-wing engines, if the top main fuel manifold and lower fuel manifold have been previously inspected by ultrasonic inspection as instructed by this Service Bulletin, and the top main fuel manifold and lower fuel manifold were found within serviceable limits, the engine is in compliance with the on-wing requirement instructed by this Service Bulletin.
NOTE:For engines that have complied with the on-wing requirement by the original revision of this Service Bulletin, no additional on-wing inspection is required.
NOTE:If multiple removals are present in the top main fuel manifold and lower fuel manifold, no multiple inspections on wing are required.
In-Shop Requirement Repetitive visual inspection and FPI in shop are necessary at all ten support block pad locations for the top main fuel manifold and/or lower fuel manifold.
This repetitive inspection is necessary for top main fuel manifold and/or lower fuel manifold above 1,700 PCSN at each shop visit, regardless if previous on-wing or in-shop inspections have been performed by this Service Bulletin.
Impact B This recommendation is to address a condition that may result in an Increased Rate of In-Flight Shutdowns (IFSD), Take-Off Aborts (TOA), Air Turn Backs (ATB) or Diversions (DIV).
NOTE:This Service Bulletin can be done on wing or in shop.
This Service Bulletin is offered to improve the reliability or performance of your GE product, or to help prevent the occurrence of the event or condition described in this Service Bulletin. If the operator elects not to participate in the bulletin, that decision will be taken into consideration by GE in evaluating future product performance issues that may arise in the operator's fleet.
D. Concurrent Requirements None.
E. Reason
(1) Objective:
To improve reliability.
(2) Condition:
A crack in a lower fuel manifold segment was found in service. The crack was found in the secondary fuel circuit (Psec) tube, adjacent to the braze that attaches the Psec tube to the support block pad, and had propagated sufficient to induce a fuel leak.
(3) Cause:
The cause of this cracking has been identified as low cycle fatigue, due to the abrupt transition created by the brazed support block pad that is unable to slide as intended due to thermal loads, resulting in stresses that exceed the material fatigue capability of the top main fuel manifold and lower fuel manifold.
(4) Inspection:
This Service Bulletin defines visual inspection, ultrasonic inspection, and FPI techniques for the top main fuel manifold and lower fuel manifold to make sure that there are no cracks in the top main fuel manifold and lower fuel manifold.
(5) Substantiation:
Substantiation is by fleet experience.
F. Approval The data contained in this Service Bulletin has been reviewed by the FAA or authorized entity representing the FAA and the repair(s) and modification(s) herein comply with the applicable Aviation Regulations and are APPROVED for installation in the model(s) listed in this Service Bulletin.
G. Manpower After you get access to the engine, you will need approximately 16 man-hours for one engine per aircraft, with an additional of 4 man-hours for two engines per aircraft, and an additional of 2 man-hours for each additional engine per aircraft, to accomplish this Service Bulletin.
GEnx-2B Service Bulletins (SBs) SB 73-0089 R01 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 Date Printed:
2021/01/12 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.
Page 3 of 35 H. Weight and Balance Weight and balance are not changed.
I. References (Use the latest version of these documents) GEnx-2B, Boeing 747-8 Aircraft Maintenance Manual (AMM) GEK 9250, Commercial Engine Standard Practices Manual (SPM) GEK 114119, GEnx-2B Engine Manual (EM) GEK 114120, GEnx-2B Cleaning, Inspection, and Repair Manual (CIR) GEK 114122, GEnx-2B Engine Illustrated Parts Catalog (EIPC) GEnx-2B S/B , ENGINE - Heat Shields (72-00-02) - Introduction of New72-0130 Stainless Steel Heat Shields GEnx-2B S/B , ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40)73-0034
- Fuel Manifold Field Inspection GEnx-2B S/B , ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40)73-0038
- Introduction of New Fuel Manifold System Hardware GEnx-2B S/B , ENGINE FUEL AND CONTROL - General (73-00-00) - Fuel73-0079 Manifold Intermix on GEnx-2B Engines Field Support Technology (FST) Procedure 2237, GEnx-2B Fuel Manifold Tube Ultrasonic Inspection NOTE:The reference documents listed below are for the engine manufacturer's internal use only:
BPP/EPEX No.: 19-72-40-83909 J. Publications Affected None.
K. Interchangeability Not applicable.
L. Software Accomplishment Summary Not applicable.
2. MATERIAL INFORMATION A. Material - Price and Availability
(1) Parts necessary to do this Service Bulletin:
None.
(2) Other Spare Parts:
Part Number Qty/ Eng Part Name Unit ($) Price Pkg Qty Lead Time Days 2619M58G01 (1) Manifold, Lower Fuel 47,730.00 (1) 5 2623M71G01 (1) Manifold, Top Main Fuel 47,730.00 (1) 5 NOTE:Prices are provided for planning purposes and are subject to change.
(3) Consumables:
Code Number Description C02-019 Oil, Engine Lubricating (engine oil) C02-023 Oil, Engine Lubricating (engine oil) C04-035 General Solvent (isopropyl alcohol) B. Industry Support Information GE Aviation will provide the following industry support:
(1) Labor compensation in the form of a back-end service credit will be provided as follows based on the labor man-hours customer actually incurred in performing the inspection and based on the number of installed engines inspected per each aircraft maintenance check:
*One engine serial number: Up to 16 man-hours OR *Two engine serial numbers: Up to 20 man-hours OR *Three engine serial numbers: Up to 22 man-hours OR *Four engine serial numbers. Up to 24 man-hours
(2) Labor compensation in the form of a back-end service credit will be provided for up to 4 labor man-hours actually incurred by customer in performing the inspection for each uninstalled engine.
(3) All labor man-hours will be credited at the customer warranty labor rate specified per the active general terms agreement (GTA) between GE and customer.
(4) The back-end service credit is available for customers who complete the inspection no later than two years from the issue date of this GEnx-2B S/B . All claims must be73-0089 submitted to GE within 12 months of completion of the inspection and no later than three
GEnx-2B Service Bulletins (SBs) SB 73-0089 R01 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 Date Printed:
2021/01/12 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.
Page 4 of 35 years from the issue date of this GEnx-2B S/B .73-0089
(5) Service credits may be applied by customer to future invoices for services, parts, and materials provided by GE Engine Services, LLC or GE Engine Services Distribution LLC.
All claims submitted to GE must contain complete information including:
*Engine serial number *Date of compliance *Engine cycles since new and cycles since shop visit (installation of post-GEnx-2B S/B 73-0038 top main fuel manifold and lower fuel manifold) at compliance *Documentation showing the labor man-hours incurred in completing the inspection *Reference customer dispensation number D-1240-3GO *Reference to GEnx-2B S/B with current revision number73-0089 All claims must be submitted electronically via the portal.myGEAviation.com The support offered in this Service Bulletin is contingent on the customer having an active GTA for the applicable GE engine model. This offer may not be assigned or otherwise transferred to any other party without the written consent of GE, which consent shall be in the sole and complete discretion of GE. The offer is extended to the customer based on unique facts and circumstances, which the customer hereby acknowledges to be a non-precedent setting between the customer and GE. The commitment is subject to the terms and conditions of the current GTA between the customer and GE for the applicable GE engine model. By accepting the support listed in this section as offered by GE, the customer agrees that this Service Bulletin offering satisfies customer's commercial needs. The terms and conditions of the customer's GTA are applicable and remain in effect.
Please contact your Customer Support Manager (CSM) if you have any question regarding this support.
C. Configuration Chart None.
D. Parts Disposition Contact your local Field Service Engineer (FSE) or GE Aviation representative to return unserviceable top main fuel manifold and lower fuel manifold.
E. Tooling - Price and Availability Tool Number Description GE-FQAP-677 GEnx-2B Fuel Manifold Tube Ultrasonic Inspection Kit To obtain an ultrasonic kit, additional items, or replacement items, contact the GE Inspection Technologies Group via the following method:
GE Inspection Technologies 50 Industrial Park Road Lewistown, PA 17044 Attn: NDE Kit Coordinator Email: ndttooling@ge.com
3. ACCOMPLISHMENT INSTRUCTIONS A. General
(1) This Service Bulletin gives instructions to do an inspection of the top main fuel manifold (1, and lower fuel manifold (2) for cracks with an ultrasonic inspectionFigure 1) technique. The inspection only involves the Psec fuel tube of the top main fuel manifold
(1) and lower fuel manifold (2) at locations adjacent to the ten support block pads.
NOTE:The ultrasonic inspection procedure is the same as the one instructed in GEnx-2B S/B . Same technique and equipment.73-0034 B. On-Wing Instructions
(1) To safely open the left and right thrust reversers on the applicable engine, do as follows:
(a) Make sure that the ENGINE START switch and the FUEL CONTROL switch are not operated as follows:
1 On the pilot's overhead panel, P5, make sure that the applicable ENGINE START switch is in the NORM (pushed-in) position and do as follows:
a Put a DO-NOT-OPERATE tag on the applicable ENGINE START switch.
2 On the pilot's aisle control stand, P8, make sure that the applicable FUEL CONTROL switch is in the CUTOFF position and do as follows:
a Put a DO-NOT-OPERATE tag on the applicable FUEL CONTROL switch.
WARNING:THE THRUST REVERSER MUST BE SECURELY HELD OPEN WHILE PERFORMING MAINTENANCE. ALWAYS BE SURE THE THRUST REVERSER IS FULLY AND PROPERLY SUPPORTED TO PREVENT INJURY TO PERSONS.
(b) Make sure to do the tasks in the sequence that follows to safely open the left and right thrust reversers on the applicable engine as follows:
GEnx-2B Service Bulletins (SBs) SB 73-0089 R01 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 Date Printed:
2021/01/12 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.
Page 5 of 35 1 Retract the leading edge flaps. Refer to the GEnx-2B, Boeing 747-8 AMM, 27-81-00, MAINTENANCE PRACTICES, TASK 27-81-00-862-019.
2 Do the deactivation of the retracted leading edge flaps. Refer to the GEnx-2B, Boeing 747-8 AMM, 27-81-00, MAINTENANCE PRACTICES, TASK 27-81-00-042-023.
3 Do the deactivation of the thrust reverser for ground maintenance. Refer to the GEnx-2B, Boeing 747-8 AMM, 78-31-00, MAINTENANCE PRACTICES, TASK 78-31-00-910-807-G00.
4 For the left and right fan cowl panels, open the applicable fan cowl panels. Refer to the GEnx-2B, Boeing 747-8 AMM, 71-11-04, MAINTENANCE PRACTICES, TASK 71-11-04-010-801-G00 and Table 1 below:
Table 1 Number Name/Location 413AL Left Fan Cowl 414AR Right Fan Cowl 423AL Left Fan Cowl 424AR Right Fan Cowl 433AL Left Fan Cowl 434AR Right Fan Cowl 443AL Left Fan Cowl 444AR Right Fan Cowl 5 For the left and right thrust reversers, open the applicable thrust reversers.
Refer to the GEnx-2B, Boeing 747-8 AMM, 78-31-00, MAINTENANCE PRACTICES, TASK 78-31-00-000-801-G00 and Table 2 below:
Table 2 Number Name/Location 415AL Left Thrust Reverser 416AR Right Thrust Reverser 425AL Left Thrust Reverser 426AR Right Thrust Reverser 435AL Left Thrust Reverser 436AR Right Thrust Reverser 445AL Left Thrust Reverser 446AR Right Thrust Reverser
(2) Before you start the inspection of the top main fuel manifold (1, and lowerFigure 1) fuel manifold (2), you can remove the aft skirt heat shields (1, 2, and 3, andFigure 2) aft skirt segment heat shield (4), if necessary, to get access to the lower fuel manifold (2, as follows:Figure 1) WARNING:REFER TO THE PRODUCT LABEL AND THE MANUFACTURER'S (MATERIAL) SAFETY DATA SHEET (SDS) FOR INSTRUCTIONS ON THE HAZARDS, STORAGE, SAFE HANDLING AND PROPER USE OF THIS PRODUCT.
(b) Apply C02-019 or C02-023 engine oil to the channel nuts on the aft skirt heat shields (1, 2, and 3, and aft skirt segment heat shield (4) before the removal ofFigure 2) the machine bolts (13).
(c) If it is necessary to get better access to the lower fuel manifold (2, Figure 1), remove the aft skirt heat shield (1, as follows:Figure 2) 1 Remove the machine bolts (9) that attach the cushioned loop clamps (10) and lower fuel manifold (11) to the tube and hose support bracket (12).
2 Remove the six machine bolts (13) that attach the aft skirt heat shield (1) to the aft skirt heat shield (2) and aft skirt segment heat shields (5 and 6).
3 Remove the aft skirt heat shield (1).
(d) If it is necessary to get better access to the lower fuel manifold (2, Figure 1), remove the aft skirt heat shield (2, as follows:Figure 2) 1 Remove the nine machine bolts (13) that attach the aft skirt heat shield (2) to the aft skirt heat shield (3), aft skirt segment heat shields (6 and 7), panel
(14) and seal (15).
2 Remove the aft skirt heat shield (2).
(e) If it is necessary to get better access to the lower fuel manifold (2, Figure 1), remove the aft skirt heat shield (3, as follows:Figure 2) 1 If necessary, remove the machine bolt (16) that attaches the support bracket (17) to the aft skirt heat shield (3).
NOTE:The machine bolt (16) and support bracket (17) apply to pre-GEnx-2B S/B 72-0130 engines only.
2 Remove the four machine bolts (13) that attach the aft skirt heat shield (3) to the aft skirt segment heat shields (4 and 7).
3 Remove the aft skirt heat shield (3).
(f) If it is necessary to get better access to the lower fuel manifold (2, Figure 1),
GEnx-2B Service Bulletins (SBs) SB 73-0089 R01 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 Date Printed:
2021/01/12 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.
Page 6 of 35 remove the aft skirt segment heat shield (4, as follows:Figure 2) 1 Remove the eight machine bolts (13) that attach the aft skirt segment heat shield
(4) to the aft skirt segment heat shield (7) and main body assembly heat shied
(8).
2 Remove the aft skirt segment heat shield (4).
(3) If necessary, you can remove the support brackets attached to the top main fuel manifold
(1) and lower fuel manifold (2) pigtails. Refer to GEnx-2B S/B .73-0054
(4) After you get access, do a visual inspection of the top main fuel manifold (1, Figure 1) and lower fuel manifold (2) tubing and braze joints. Use a flashlight and mirrors as necessary.
WARNING:REFER TO THE PRODUCT LABEL AND THE MANUFACTURER'S (MATERIAL) SAFETY DATA SHEET (SDS) FOR INSTRUCTIONS ON THE HAZARDS, STORAGE, SAFE HANDLING AND PROPER USE OF THIS PRODUCT.
(5) Clean the inspection areas of the top main fuel manifold (1, and lower fuelFigure 1) manifold (2) with C04-035 isopropyl alcohol.
CAUTION:LET THE TEMPERATURE OF THE TOP MAIN FUEL MANIFOLD (1), LOWER FUEL MANIFOLD (2), AND
ADJACENT HARDWARE DECREASE TO AMBIENT TEMPERATURE BEFORE YOU DO THE ULTRASONIC INSPECTION OF THE TOP MAIN FUEL MANIFOLD (1) AND LOWER FUEL MANIFOLD (2). OTHERWISE, DAMAGE TO THE PROBES CAN OCCUR IF THEY CONTACT HOT SURFACES.
(6) Do an ultrasonic inspection of the top main fuel manifold (1, and lower fuelFigure 1) manifold (2) for cracks in the pilot secondary fuel tube of the manifold assembly adjacent to the ten support block pads. Refer to paragraph 4., and as follows:APPENDIX - A
(a) If the ultrasonic inspection cannot be done on one of the brazed support block pad locations due to engine variation and possible clearance issues, do a class A FPI on the concerned brazed block location. Refer to the SPM, 70-32-03, SPOT-FLUORESCENT-PENETRANT INSPECTION or GEnx-2B, Boeing 747-8 AMM, 70-11-06, MAINTENANCE PRACTICES, TASK 70-11-06-200-801-G00.
*Indications of 0.03 inch (0.8 mm) or less are permitted.
NOTE:This procedure can be done only if the ultrasonic inspection cannot be performed.
(7) If you find cracks or leakage in the top main fuel manifold (1, and/or lowerFigure 1) fuel manifold (2), replace the affected top main fuel manifold (1) and/or lower fuel manifold (2) as follows:
(a) For on-wing replacement of the top main fuel manifold (1, refer to GEnx-2BFigure 1), S/B .73-0079
(b) For replacement of the lower fuel manifold (2, you must remove the engine.Figure 1), Refer to GEnx-2B S/B .73-0038 NOTE:The lower fuel manifold (2, cannot be replaced on wing.Figure 1)
(c) If you do not find cracks, no further inspection is necessary and the inspection is complete.
(8) If you removed the support brackets attached to the top main fuel manifold (1, Figure 1) and lower fuel manifold (2) pigtails, install the support brackets before you install the aft skirt heat shields (1, 2, and 3, and aft skirt segment heat shield (4).Figure 2) Refer to GEnx-2B S/B .73-0054
(9) If removed, install the aft skirt heat shields (1, 2, and 3, and aft skirtFigure 2) segment heat shield (4) again as follows:
(a) Install the aft skirt segment heat shield (4) as follows:
1 Put the aft skirt segment heat shield (4) in its position on the main body assembly heat shied (8) and aft skirt segment heat shield (7).
2 Install the eight machine bolts (13) that attach the aft skirt segment heat shield
(4) to the main body assembly heat shied (8) and aft skirt segment heat shield
(7).
3 Torque the machine bolts (13) to 51 to 59 lb in. (5.7 to 6.6 Nm).
(b) Install the aft skirt heat shield (3, as follows:Figure 2) 1 Put the aft skirt heat shield (3) in its position on the aft skirt segment heat shields (4 and 7).
2 Install the four machine bolts (13) that attach the aft skirt heat shield (3) to the aft skirt segment heat shields (4 and 7).
3 Torque the machine bolts (13) to 51 to 59 lb in. (5.7 to 6.6 Nm).
4 If necessary, install the support bracket (17) to the aft skirt heat shield (4) with the machine bolt (16) and do as follows:
NOTE:The machine bolt (16) and support bracket (17) apply to pre-GEnx-2B S/B 72-0130 engines only.
a Torque the machine bolt (16) to 51 to 59 lb in. (5.7 to 6.6 Nm).
(c) Install the aft skirt heat shield (2, as follows:Figure 2) 1 Put the aft skirt heat shield (2) in its position on the aft skirt segment heat shields (6 and 7), panel (14), seal (15), and aft skirt heat shield (4).
2 Install the nine machine bolts (13) that attach the aft skirt heat shield (2) to the aft skirt segment heat shields (6 and 7), panel (14), seal (15), and aft skirt heat shield (4).
3 Torque the machine bolts (13) to 51 to 59 lb in. (5.7 to 6.6 Nm).
(d) Install the aft skirt heat shield (1, as follows:Figure 2) 1 Put the aft skirt heat shield (1) in its position on the aft skirt heat shield (2)
GEnx-2B Service Bulletins (SBs) SB 73-0089 R01 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 Date Printed:
2021/01/12 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.
Page 7 of 35 and aft skirt segment heat shields (5 and 6).
2 Install the six machine bolts (13) that attach the aft skirt heat shield (1) to the aft skirt heat shield (2) and aft skirt segment heat shields (5 and 6) and do as follows:
a Torque the machine bolts (13) to 51 to 59 lb in. (5.7 to 6.6 Nm).
3 Install the machine bolts (9) that attach the cushioned loop clamps (10) and the lower fuel manifold (11) to the tube and hose support bracket (12) and do as follows:
a Torque the machine bolts (9) to 32 to 38 lb in. (3.6 to 4.2 Nm).
(10)Put the airplane back to its usual condition as follows:
(a) Do the tasks in the sequence that follows to safely close the left and right thrust reversers on the applicable engine as follows:
1 For the left and right thrust reversers, close the applicable thrust reversers.
Refer to the GEnx-2B, Boeing 747-8 AMM, 78-31-00, MAINTENANCE PRACTICES, TASK 78-31-00-400-801-G00 and Table 3 below:
Table 3 Number Name/Location 415AL Left Thrust Reverser 416AR Right Thrust Reverser 425AL Left Thrust Reverser 426AR Right Thrust Reverser 435AL Left Thrust Reverser 436AR Right Thrust Reverser 445AL Left Thrust Reverser 446AR Right Thrust Reverser 2 For the left and right fan cowl panels, close the applicable fan cowl panels.
Refer to the GEnx-2B, Boeing 747-8 AMM, 71-11-04, MAINTENANCE PRACTICES, TASK 71-11-04-410-801-G00 and Table 4 below:
Table 4 Number Name/Location 413AL Left Fan Cowl 414AR Right Fan Cowl 423AL Left Fan Cowl 424AR Right Fan Cowl 433AL Left Fan Cowl 434AR Right Fan Cowl 443AL Left Fan Cowl 444AR Right Fan Cowl 3 Do the activation of the retracted leading edge flaps. Refer to the GEnx-2B, Boeing 747-8 AMM, 27-81-00, MAINTENANCE PRACTICES, TASK 27-81-00-442-027.
4 Do the activation of the thrust reverser after ground maintenance. Refer to the GEnx-2B, Boeing 747-8 AMM, 78-31-00, MAINTENANCE PRACTICES, TASK 78-31-00-910-808-G00.
(b) Do these steps to remove the DO-NOT-OPERATE tags from the applicable ENGINE START switch and FUEL CONTROL switch:
1 On the pilot's overhead panel, P5, remove the DO-NOT-OPERATE tag from the applicable ENGINE START switch and do as follows:
a Put the applicable ENGINE START switch to the NORM (pushed-in) position.
2 On the pilot's aisle control stand, P8, remove the DO-NOT-OPERATE tag from the applicable FUEL CONTROL switch and do as follows:
a Put the applicable FUEL CONTROL switch to the CUTOFF position.
C. In-Shop Instructions
(1) Remove the top main fuel manifold (1, Refer to the GEnx-2B EM, 72-41-00,Figure 1).
DISASSEMBLY 001, CONFIG 01, Subtask 72-41-00-040-024 or CONFIG 02, Subtask 72-41-00-040-032.
NOTE:GEnx-2B S/B can be used as reference to help with the removal of the top main fuel73-0038 manifold (1, Figure 1).
(2) Remove the lower fuel manifold (2, Refer to the GEnx-2B EM, 72-41-00,Figure 1).
DISASSEMBLY 001, CONFIG 01, Subtask 72-41-00-040-024 or CONFIG 02, Subtask 72-41-00-040-032.
NOTE:GEnx-2B S/B can be used as reference to help with the removal of the lower fuel73-0038 manifold (2, Figure 1).
(3) Do an inspection of the top main fuel manifold (1, and lower fuel manifold (2).Figure 1) Refer to the GEnx-2B CIR, 72-41-80, INSPECTION 001.
NOTE:GEnx-2B CIR, 72-41-80, INSPECTION 001 indicates that FPI of the brazed joints is not necessary. However, FPI of the brazed joints is necessary and must be accomplished as
GEnx-2B Service Bulletins (SBs) SB 73-0089 R01 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 Date Printed:
2021/01/12 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.
Page 8 of 35 specified in step 3.C.(4) of this Service Bulletin.
(4) Do a Class A FPI of the ten brazed block joints on the top main fuel manifold (1, Figure and lower fuel manifold (2). Refer to the SPM, 70-32-02, SPOT-FLUORESCENT-PENETRANT1) INSPECTION and do as follows:
(a) Indications of 0.03 inch (0.8 mm) or less are permitted.
(5) Deleted.
(6) If you find cracks or indications on the top main fuel manifold (1, or lowerFigure 1) fuel manifold (2), replace the affected top main fuel manifold (1) and lower fuel manifold
(2) and do as follows:
(a) Send the unserviceable top main fuel manifold (1) and/or lower fuel manifold (2) back to GE Aviation. Refer to paragraph 2.D., .Parts Disposition
(7) Install the top main fuel manifold (1, Refer to the GEnx-2B EM, 72-40-00,Figure 1).
ASSEMBLY 001, CONFIG 01, Subtask 72-40-00-440-023 or CONFIG 02, Subtask 72-40-00-440-052.
NOTE:GEnx-2B S/B can be used as reference to help with the removal of the top main fuel73-0038 manifold (1, Figure 1).
(8) Install the lower fuel manifold (2, Refer to the GEnx-2B EM, 72-40-00,Figure 1).
ASSEMBLY 001, CONFIG 01, Subtask 72-40-00-440-023 or CONFIG 02, Subtask 72-40-00-440-052.
NOTE:GEnx-2B S/B can be used as reference to help with the installation of the lower73-0038 fuel manifold (2, Figure 1).
(9) Do an engine test in a test cell as follows:
(a) Do a dry motoring check, an idle leak check, and a high power leak check. Refer to the GEnx-2B EM, 72-00-00, TESTING 001 and TESTING 002.
GEnx-2B Service Bulletins (SBS) SB 73-0089 RO1 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 LEGEND:
1. TOP MAIN FUEL MANIFOLD AFT LOOKING FORWARD
2. LOWER FUEL MANIFOLD 6016747-00 Top Main Fuel Manifold and Lower Fuel Manifold Location Figure 1 [GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2021/01/12 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 9 of 35 [Person, without USG authorization, is strictly prohibited.
GEnx-2B Service Bulletins (SBS) SB 73-0089 RO1 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 →A FWD 6016729-00 Aft Skirt Heat Shield and Aft skirt Segment Heat Shield Location Figure 2 (Sheet 1) GE PROPRIETARY INFORMATION - Not to be used, disclosed to others Date Printed: reproduced without the express written consent of GE. Technical data Page 2021/01/12 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 10 of 35 [Person, without USG authorization, is strictly prohibited.
GEnx-2B Service Bulletins (SBS) SB 73-0089 RO1 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 D LEGEND:
1. AFT SKIRT HEAT SHIELD
2. AFT SKIRT HEAT SHIELD
3. AFT SKIRT HEAT SHIELD
4. AFT SKIRT SEGMENT HEAT SHIELD
5. AFT SKIRT SEGMENT HEAT SHIELD
6. AFT SKIRT SEGMENT HEAT SHIELD A-A
7. AFT SKIRT SEGMENT HEAT SHIELD
8. MAIN BODY ASSEMBLY HEAT SHIELD FORWARD LOOKING AFT 6016730-00 Aft Skirt Heat Shield and Aft Skirt Segment Heat Shield Location Figure 2 (Sheet 2) GE PROPRIETARY INFORMATION - Not to be used, disclosed to others Date Printed: reproduced without the express written consent of GE. Technical data Page 2021/01/12 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 11 of 35 Person, without USG authorization, is strictly prohibited.
GEnx-2B Service Bulletins (SBS) SB 73-0089 RO1 ENGINE FUEL AND CONTROL - Fuel Nozzle Manifolds (73-11-40) - Top Main Fuel Manifold and Lower Fuel Manifold Inspection - Post-GEnx-2B S/B 73-0038 2 (REF) - _5 (REF) 6 (REF) 1 (REF) 2 (REF) LEGEND:
9. MACHINE BOLT (QTY-2)
10. CUSHIONED LOOP CLAMP (QTY-2)
11. LOWER FUEL MANIFOLD
12. TUBE AND HOSE SUPPORT BRACKET
13. MACHINE BOLT (QTY-27) 6016731-00 Aft Skirt Heat Shield and Aft Skirt Segment Heat Shield Location Figure 2 (Sheet 3) GE PROPRIETARY INFORMATION - Not to be used, disclosed to others Date Printed: reproduced without the express written consent of GE. Technical data Page 2021/01/12 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 12 of 35 Person, without USG authorization, is strictly prohibited.