TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9ad2a926168c752bfbeb02fc36025574d76820df26e629eb06c23f7c9e3bcc4f' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9ad2a926168c752bfbeb02fc36025574d76820df26e629eb06c23f7c9e3bcc4f' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
TRANSMITTAL SHEET
September 13, 2022 Transmittal Page 1 This sheet transmits Revision A , dated September 13, 2022, to Gulfstream GVII-G500 Aircraft Service Change (ASC) 039, dated September 12, 2022, titled: Flight Controls (ATA 27) Flight Control Computer (FCC) Software update v9.5.
Reason for Revision:
Adds European Union Aviation Safety Agency (EASA) approval information.
I. Planning Information:
Added EASA information to standard verbiage Step G. Approval: Added EASA approval language for revision A Step N. Publications Affected: Added EASA AFMS information
II. Material Information:
Step C.1. Removed table; changed information to a Note Step C.2. Added items from deleted table to table for part procured outside of kits Updated Note 1 to remove kit verbiage Added Note 4 Step D. Updated part nomenclature
III. Modification Instructions:
Step A.1. Added “Transmittal Sheet and” Step D. Warning note changed “and” to “the” Step F. Added EASA AFMS information
Effect of Revision on Prior Accomplishment:
This ASC revision replaces ASC 039. Aircraft operators who have previously complied with ASC 039 are in compliance with this revision and should return the service reply card marked “Previously complied with.”
NOTE This ASC has been reproduced in its entirety. A vertical line in the left margin indicates a change in that line of text or figure. There are no change bars for format differences.
List of Effective Pages:
Page No. Date 1 – 7 September 13, 2022 Revision History:
Original Issue September 12, 2022 Revision A September 13, 2022
AIRCRAFT SERVICE CHANGE No. 039
SUBJECT FLIGHT CONTROLS (ATA 27)
FLIGHT CONTROL COMPUTER (FCC) SOFTWARE UPDATE v9.5
Revision A September 13, 2022
AIRCRAFT SERVICE CHANGE PROPRIETARY NOTICE: These materials include proprietary information and data of Gulfstream Aerospace Corporation. Unauthorized distribution is strictly prohibited. ©2022 Gulfstream Aerospace Corporation. All rights reserved.
EAR EXPORT CONTROLLED WARNING: This document contains technical data that is subject to U.S. Export Controls. Release to foreign persons, export transfer or re-export of this technical data requires approval from the Department of Commerce.
September 12, 2022 Aircraft Service Change No. 039 Revision A, September 13, 2022
PILOTS INFORMATION SHEET
FLIGHT CONTROL COMPUTER (FCC) SOFTWARE UPDATE v9.5
This service change updates the Flight Control Computers (FCCs) software version to v9.5.
Incorporation of FCC v9.5 software resolves the AOA limiter and the spoiler monitor issues addressing FAA Airworthiness Directive s (AD) 2022- 10-05 and 2020-02-18. Additionally, FCC v9.5 software includes many updates and problem report resolutions providing improved robustness and performance of the system.
Aircraft will require GVII -G500 FAA Airplane Flight Manual (AFM) GAC -AC-GVII-G500-OPS-0002, Revision 3, or later approved version, as a result of this service change.
Aircraft operating under EASA regulations will require GVII-G500 Airplane Flight Manual Supplement (AFMS) EASA-GVII-G500 (Issue 1)-2020-01, Revision 3, or later approved version, as a result of this service change.
PLEASE DETACH AND GIVE TO FLIGHT DEPARTMENT PERSONNEL
AIRCRAFT SERVICE CHANGE PROPRIETARY NOTICE: These materials include proprietary information and data of Gulfstream Aerospace Corporation. Unauthorized distribution is strictly prohibited. ©2022 Gulfstream Aerospace Corporation. All rights reserved.
EAR EXPORT CONTROLLED WARNING: This document contains technical data that is subject to U.S. Export Controls. Release to foreign persons, export transfer or re-export of this technical data requires approval from the Department of Commerce.
September 12, 2022 Aircraft Service Change No. 039 Revision A, September 13, 2022
PILOTS INFORMATION SHEET
FLIGHT CONTROL COMPUTER (FCC) SOFTWARE UPDATE v9.5
This service change updates the Flight Control Computers (FCCs) software version to v9.5.
Incorporation of FCC v9.5 software resolves the AOA limiter and the spoiler monitor issues addressing FAA Airworthiness Directive s (AD) 2022- 10-05 and 2020-02-18. Additionally, FCC v9.5 software includes many updates and problem report resolutions providing improved robustness and performance of the system.
Aircraft will require GVII -G500 FAA Airplane Flight Manual (AFM) GAC -AC-GVII-G500-OPS-0002, Revision 3, or later approved version, as a result of this service change.
Aircraft operating under EASA regulations will require GVII-G500 Airplane Flight Manual Supplement (AFMS) EASA-GVII-G500 (Issue 1)-2020-01, Revision 3, or later approved version, as a result of this service change.
PLEASE RETAIN THIS COPY WITH THE ASC BOOKLET
AIRCRAFT SERVICE CHANGE September 12, 2022 Aircraft Service Change No. 039 Revision A, September 13, 2022 Page 1 of 7 Flight Controls (ATA 27) – Flight Control Computer (FCC) Software Update v9.5 The design of an Aircraft Service Change (ASC) is configured to a standard production aircraft. It is the installing facility’s resp onsibility to ensure the development, documentation, and approval of any deviations to this installation.
The instructions provided incorporate the designed modification alone, in step -by-step form, and are independent of other aircraft maintenance. No ac commodation for other maintenance, modification, inspection, or system operation is made unless specifically identified within this document. If any of these actions are performed concurrent with this A SC, it is the responsibility of the performing facilit y to coordinate all maintenance activity and to follow established safe maintenance practices as defined in the Aircraft Maintenance Manual (AMM) and by the Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA).
This aircraft is certified as Electrical Wiring Interconnection System (EWIS) compliant; as such, deviations from the approved electrical wiring installation(s) must comply with Advisory Circular (AC) 25.1701-1 and be approved by a properly FAA/EASA delegated EWIS engineering representative.
I. Planning Information:
A. Effectivity This service change is applicable to aircraft serial numbers 72001 – 72111.
This or a similar change will be installed in production on aircraft, serial number 72112 and subsequent.
B. Prerequisites None C. Concurrent Requirements None D. Reason This service change updates the Flight Control Computers (FCCs) software version to v9.5.
Incorporation of FCC v9.5 software resolves the AOA limiter and the spoiler monitor issues addressing FAA Airworthiness Directives (AD) 2022-10-05 and 2020-02-18. Additionally, FCC v9.5 software includes many updates and problem report resolutions providing improved robustness and performance of the system. These updates include but are not limited to:
• Speed brake auto-retract with landing gear extension
• Improved Low Speed Awareness (LSA) display continuity during high altitude descent and with speed brakes extended
• Decreased pitch transients during speed brake movement
• Addition of battery only start procedure
• Eliminates assertion of multiple nuisance CAS messages during various powerup, inflight, landing, and shutdown scenarios
• Ability to clear Stall Ref Speed Increase CAS message in the event it is caused by slow WAI heating (Refer to AFM)
• Eliminates nuisance FCS No Dispatch CAS due to Rad Alt mismatch during ground ops over wet ramp
AIRCRAFT SERVICE CHANGE September 12, 2022 Aircraft Service Change No. 039 Revision A, September 13, 2022 Page 2 of 7
E. Description This service change loads new software to the FCC modules, re-identifies each module with a new part number, and conducts return-to-service functional checks post-modification.
F. Compliance Incorporation of this ASC is recommended.
This ASC is a managed program that may only be accomplished at a Gulfstream Aerospace GVII-G500 Authorized Warranty Facility or Factory Authorized Service Center equipped with the Thales PMAT Tool kit. This ASC must be coordinated through your Gulfstream Regional Sales Manager (RSM) or by contacting Gulfstream Scheduling at 800- 810-GULF (4853), or 912-965-4178.
G. Approval The design change effected by this ASC has been classified as Major / Not Significant by the United States FAA. The design change data contained here-in and effected by this document is approved and accepted by the FAA under Gulfstream Organization Designation Authorization (ODA) Project Number, TD-01-2020-0048.
Revision A : The design change effected by this ASC has been classified as Major / Not Significant by the United States FAA and Major / Non-Basic for the EASA. The design change data contained here-in and effected by this document is approved and accepted by the FAA under Gulfstream Organization Designation Authorization (ODA) Project Number, TD-01-2020- 0048 and by the EASA under Major Change Approval number 10080122.
This ASC provides type design data that has been approved for installation on aircraft operating in accordance with FAA or EASA regulations.
H. Approved Engineering Data The source data for this aircraft service change is:
72A2700039-001 Rev. “–” ASC-039 Aircraft Service Change Configuration Control Document GVII-G500 Flight Control Computer Software Update I. Labor Requirements Approximately 16 labor-hours will be required for this installation.
Knowledge of the Flight Control Systems will be required for this installation. Only trained / certified Gulfstream personnel will perform the FCC software update as described within this ASC.
J. Weight and Balance No change K. Electrical Load Data No change L. Software Accomplishment Flight control software is loaded directly to the modules of the FCC in accordance with the appropriate Thales Service Bulletins and GVII -GER-0780 GV II FCC Software Upload Procedure.
AIRCRAFT SERVICE CHANGE September 12, 2022 Aircraft Service Change No. 039 Revision A, September 13, 2022 Page 3 of 7
M. References Aircraft Maintenance Manual (AMM), Chapters 20 and 27 Thales SB C13204J -27-002 Flight Controls – Flight Control Computer Module A C13204J Introduction of a New Software Standard (Mod State KB02). See Appendix A.
Thales SB C13212J-27-002 Flight Controls – Flight Control Computer Module B C13212J Introduction of a New Software Standard (Mod State KB02). See Appendix B.
N. Publications Affected Flight Manual Revision / Supplement Required:
Aircraft will require GVII -G500 FAA Airplane Flight Manual (AFM) GAC -AC-GVII-G500-OPS- 0002, Revision 3, or later approved version, as a result of this service change.
Aircraft operating under EASA regulations will require GVII -G500 Airplane Flight Manual Supplement (AFMS) EASA -GVII-G500 (Issue 1) -2020-01, Revision 3, or later approved version, as a result of this service change.
Data concerning this service change will be published in a future revision of the affected manual(s). This booklet will provide technical data until the revision(s) is published.
AIRCRAFT SERVICE CHANGE September 12, 2022 Aircraft Service Change No. 039 Revision A, September 13, 2022 Page 4 of 7 II. Material Information:
A. Material – Price and Availability Refer to Section I. F. Compliance.
B. Industry Support Information (Warranty) This ASC will be provided and installed at no charge for a period of 12-months from the release date noted on the cover of this Aircraft Service Change if installed at a Gulfstream GVII-G500 Authorized Warranty Facility or Factory Authorized Service Center equipped with the appropriate PMAT tool and trained personnel.
C. Material Necessary for Each Aircraft
1. Materials required and kit effectivity:
None NOTE Materials for this ASC are not kitted. Distribution is coordinated through scheduling per step I. F. Compliance.
2. Materials required to be procured separate from ASC kits:
PARTS REQUIRED PER AIRCRAFT:
Item Part Number Nomenclature QTY Notes/Alt./Subs.
1. C13204J-27-002 Thales FCC SW 9.5 for Module A 1 Notes 1 & 2 2. C13212J-27-002 Thales FCC SW 9.5 for Module B 1
3. 72A2700039-001 FCC S/W v9.5 CCD 1 Note 3
4. GVII-GER-3962 GVII FCS Software Update RTS 1 Note 3
5. GVII-GER-0780 GVII FCC Software Upload 1 Note 3
6. F1432207 Mod kit A C13204KB02 4 Note 4
7. F1432209 Mod kit B C13212KB02 4 Note 4 NOTE 1 Thales FCC software resides with the PMAT tool.
NOTE 2 Thales service bulletins are available as part of Appendices A and B of this ASC.
NOTE 3 Items 3-5 are available to authorized users through the Aircraft Information Retrieval (AIR) library.
NOTE 4 Distribution is coordinated through scheduling per step I. F. Compliance.
AIRCRAFT SERVICE CHANGE September 12, 2022 Aircraft Service Change No. 039 Revision A, September 13, 2022 Page 5 of 7
D. Re-identified Parts PARTS REQUIRED PER AIRCRAFT:
Item Part Number Nomenclature QTY Notes/Alt./Subs.
1. 72P2700001Z100-SW9 FCC SW v9.5 Module A 4 Note 1
2. 72P2700001Z200-SW9 FCC SW v9.5 Module B 4 NOTE 1 FCC Module part numbers are the result of the upgrade and are marked appropriately as part of the modification. No units are included as a part of this kit.
Existing aircraft units are modified to the new part number.
E. Special Equipment / Tools Required Power Supply, PN GSE2400108, or equivalent Centralized Hydraulic Test Unit, PN GSE2900149, or equivalent NOTE Aircraft 60Hz power and engine hydraulics may be used in place of power and hydraulic units.
Thales PMAT Tool kit, PN B12940AA04 or later approved version NOTE These kits will only be available at select facilities and maintained by the facility’s tool crib.
AIRCRAFT SERVICE CHANGE September 12, 2022 Aircraft Service Change No. 039 Revision A, September 13, 2022 Page 6 of 7 III. Modification Instructions:
NOTE Prior to beginning software update, make note of any fault codes or CAS messages to help distinguish which messages are resultant of the software loading process and to prevent unnecessary troubleshooting post -modification. Record fault codes or CAS messages for later reference.
A. Preparation:
1. Review Transmittal Sheet and pages 1 - 5 of this ASC for any applicable actions or requirements. Ensure aircraft meets all configuration requirements prior to beginning modification.
2. Remove all electrical power. Refer to AMM, Chapter 20.
3. Gain access to FCCs 1 and 2 in the LEER and REER. Refer to AMM Chapter 27.
4. Verify HDMI receptacles on the front of the FCC modules are clear of FOD and in good condition. Anything that prevents a good connection must be resolved prior to tool connection and software update loading.
B. Software loading procedures:
1. Apply power to aircraft. Refer to AMM, Chapter 20.
2. Configure aircraft and connect PMAT tool as directed in GVII-GER-0780 and Thales SBs (see Appendices A and B).
3. Load FCC software using GVII-GER-0780.
WARNING AVOID MOVING FCS CONTROLS DURING THE UPLOADING PROCESS. INADVERTENT FCS SURFACE MOVEMENT IS NOT EXPECTED / TOLERATED DURING UPDATE.
4. During FCC software loading, ensure the Local Intervention Report (LIR) is completed according to the requirements in the Thales Service Bulletins (see Appendices A & B) as noted in GVII-GER-0780. Two copies of the report will be required; the original should be retained with the aircraft records and a scanned copy should be submitted to Thales.
Inspection should be present during the completion of the LIR.
5. Upon completion of software load to the FCCs, remove power from the FCCs by opening the following CBs: FCC 1A, FCC 1B, FCC 2A, FCC 2B, BFCU as directed in GVII-GER- 0780. Disconnect the PMAT tool / equipment and prepare aircraft for operational test.
C. Replace all items back into the PMAT kit.
D. Follow on:
WARNING CLOSING ANY FLIGHT CONTROL SYSTEM CIRCUIT BREAKER MAY CAUSE THE FLIGHT CONTROL SURFACES TO MOVE . FAILURE TO
ENSURE ALL PERSONNEL AND EQUIPMENT ARE CLEAR OF FLIGHT
CONTROL SURFACES BEFORE CLOSING THE FLIGHT CONTROL
SYSTEM CIRCUIT BREAKER MAY RESULT IN SERIOUS INJURY, DEATH, OR DAMAGE TO AIRCRAFT.
1. Perform GVII-GER-3962 – GVII FCS Return to Service (RTS) Procedure Flight Control Computer (FCC) Software Upgrade.
E. Return PMAT kit to tool crib.
AIRCRAFT SERVICE CHANGE September 12, 2022 Aircraft Service Change No. 039 Revision A, September 13, 2022 Page 7 of 7
F. Ensure GVII-G500 FAA Airplane Flight Manual (Issue 1), Revision 3, or later, is available. In addition, aircraft operating under EASA regulations will require GVII-G500 AFMS EASA-GVII- G500 (Issue 1)-2020-01, Revision 3, or later approved version.
G. Ensure work area is clean and clear of foreign objects and debris (FOD).
H. Record compliance with this aircraft service change in the aircraft permanent maintenance records and return aircraft to flight status.
I. Upon incorporation of this ASC , send a copy of the attached Service Reply Card to:
ASC039@Gulfstream.com.
J. Report compliance with this aircraft service change to Gulfstream Computerized Maintenance Program (CMP) by uploading the attached service reply card, along with the CMP task card(s) sign-off using MyGulfstream, MyCMP Document Upload, e-mail to fax@campsystems.com or fax to Gulfstream CMP at 800-944-1775 or 912-963-0265.
AIRCRAFT SERVICE CHANGE PROPRIETARY NOTICE: These materials include proprietary information and data of Gulfstream Aerospace Corporation. Unauthorized distribution is strictly prohibited. ©2022 Gulfstream Aerospace Corporation. All rights reserved.
EAR EXPORT CONTROLLED WARNING: This document contains technical data that is subject to U.S. Export Controls. Release to foreign persons, export transfer or re-export of this technical data requires approval from the Department of Commerce.
SERVICE REPLY CARD
Please upload this page, along with the CMP task card(s) sign-off using MyGulfstream, MyCMP Document Upload, e-mail to fax@campsystems.com or fax to Gulfstream CMP at 800-944-1775 or 912-963-0265.
THE FOLLOWING AIRCRAFT SERVICE CHANGE HAS BEEN COMPLIED WITH:
ASC NO. CMP CODE ACFT SERIAL NO. COMPLIANCE DATE 039A 970391.000
AIRCRAFT HOURS:
AIRCRAFT LANDINGS:
PREVIOUSLY COMPLIED WITH (PCW):
DATE:
NOT APPLICABLE:
DATE:
PARTS INFORMATION
NOMENCLATURE PART NUMBER SERIAL NUMBER CMP CODE FCC #1 A MON MODULE OFF: 270102.000 ON: 72P2700001Z100-SW9 FCC #1 A COM MODULE OFF: 270103.000 ON: 72P2700001Z100-SW9 FCC #1 B MON MODULE OFF: 270101.000 ON: 72P2700001Z200-SW9 FCC #1 B COM MODULE OFF: 270100.000 ON: 72P2700001Z200-SW9 FCC #2 A MON MODULE OFF: 270108.000 ON: 72P2700001Z100-SW9 FCC #2 A COM MODULE OFF: 270109.000 ON: 72P2700001Z100-SW9 FCC #2 B MON MODULE OFF: 270107.000 ON: 72P2700001Z200-SW9 FCC #2 B COM MODULE OFF: 270106.000 ON: 72P2700001Z200-SW9