On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Hamilton Sundstrand Corporation. Filed by the FAA in regulations.gov docket FAA-2021-0032; AD 2022-08-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© Hamilton Sundstrand Corporation. Filed by the FAA in regulations.gov docket FAA-2019-1008; AD 2020-12-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Hamilton Sundstrand
- Type
- Alert Service Bulletin
- Number
- 54H60-61-A154
- Latest revision known
- 54H60-61-A154, Revision 1, dated May 29, 2020
- Copies
- 2 files of 2 revisions
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 2 proposed ADs.
Text · 20OCR
Revision 1, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Hamilton Sundstrand Corporation. Filed by the FAA in regulations.gov docket FAA-2021-0032; AD 2022-08-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'e6c7a1ab95e083f32b04bf99e120b0d159e04256da85d3efae542af819d85cf0' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'e6c7a1ab95e083f32b04bf99e120b0d159e04256da85d3efae542af819d85cf0' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
No text on this page: it may be a figure. Open the PDF to see it.
UTC Aerospace Systems Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
ALERT SERVICE BULLETIN
PLANNING INFORMATION A. Effectivity
(1) Hamilton Sundstrand Variable Pitch Aircraft Propeller, Model 54H60, Part Number (PN) 54H60 series, all serial numbers (SN)s that contain a blade below SN 813320.
NOTE: If a propeller contains a blade below SN 813320, all of the blades on that propeller are subject to this bulletin.
(2) Hamilton Sundstrand Variable Pitch Aircraft Propeller, Model 54H60, PN 54H60 series, all serial numbers, if the propeller contains blades that have not been overhauled within ten years.
B. Concurrent Requirements
(1) Beginning August 1, 2020, this bulletin must be done at the same time as Alert Service Bulletin (ASB) 54H60-61-A155.
C. Reason
(1) Problem
(a) Propeller blades below SN 813320 may be more susceptible to have intergranular cracks in the taper bore (refer to Figure 1).
TYPICAL CRACK ASB-54H60-61-A154-135353 Figure 1 Typical Crack Orientation and Location in the Propeller Blade Taper Bore U.S. Export Classification: EAR 9E991 COLLINS AEROSPACE PROPRIETARY - Subject to the restriction on the title or cover page.
Original Issue Date: Aug 26/19 54H60-61-A154 Revision 1: May 29/20 Page 2
No text on this page: it may be a figure. Open the PDF to see it.
No text on this page: it may be a figure. Open the PDF to see it.
No text on this page: it may be a figure. Open the PDF to see it.
No text on this page: it may be a figure. Open the PDF to see it.
No text on this page: it may be a figure. Open the PDF to see it.
No text on this page: it may be a figure. Open the PDF to see it.
• UTC Aerospace Systems Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
ALERT SERVICE BULLETIN
INTERNAL
TAPER BORE
INSPECTION AREA ASB-54H60-61-A154-135352 Figure 2 Internal Taper Bore on the Propeller Blade
(2) Equipment Setup:
NOTE: This procedure is written for the Nortec 600 series eddy current tester.
Equivalent equipment must be set up to meet the same inspection sensitivity and coverage.
WARNING: USE ISOPROPYL ALCOHOL, TT-1-735 OR ASTM D770, CORRECTLY.
ISOPROPYL ALCOHOL IS FLAMMABLE, EXPLOSIVE, AND A MILD POISON. IT CAN HAVE A BAD EFFECT ON YOUR HEALTH OR SAFETY. BEFORE YOU USE THE ISOPROPYL ALCOHOL, GET THE
MATERIAL SAFETY DATA SHEET FROM THE MANUFACTURER OR SUPPLIER OF THE MATERIAL AND READ IT CAREFULLY. READ THE DETAILED WARNING, WO046SE, IN THE WARNINGS REGISTRY SPM 20-00-04. BEFORE YOU USE THE ISOPROPYL ALCOHOL, PUT ON CHEMICAL-SPLASH GOGGLES. MAKE SURE THAT YOU HAVE
SUFFICIENT AIRFLOW TO KEEP THE ISOPROPYL ALCOHOL FUMES BELOW THE MATERIAL SAFETY DATA SHEET LIMIT.
(a) Clean the eddy current probe with a clean lint-free cleaning cloth made moist with isopropyl alcohol, TT-I-735.
U.S. Export Classification: EAR 9E991 COLLINS AEROSPACE PROPRIETARY - Subject to the restriction on the title or cover page.
Original Issue Date: Aug 26/19 54H60-61-A154 Revision 1: May 29/20 Page 9
UTC Aerospace Systems Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
ALERT SERVICE BULLETIN
(b) Use the 16-pin lemo cable to connect the eddy current probe to the eddy current tester.
CAUTION: MAKE SURE TO APPLY TEFLON TAPE ON THE EDDY CURRENT PROBE CORRECTLY. THE TAPE MUST EXTEND COMPLETELY
OVER THE PROBE TIP AND UP THE TWO SIDES OF THE PROBE LEG. THIS WILL DECREASE THE RISK OF BLADE DAMAGE WHILE YOU DO THE INSPECTION.
(c) Apply Teflon tape to the end of the eddy current probe as shown in Figure 3.
NOTE: The Teflon tape may need to be replaced frequently. It is critical to make sure that Teflon tape is applied correctly and used in all steps of this procedure.
TEFLON TAPE
EXTENDS COMPLETELY
OVER THE PROBE EDDY
TIP AND UP THE TWO CURRENT
SIDES OF PROBE LEG PROBE SHAFT ASB-54H60-61-A154-135355 Figure 3 Teflon Tape Application
(d) Turn the eddy current tester power on and let the tester run for at least 10 minutes before the inspection.
NOTE: The screen trace or flying dot can drift up to two major divisions in 15 minutes or less when the eddy current tester is initially powered up.
(e) Set the eddy current tester (refer to Figure 4) to the default settings by either:
• Selecting LOAD DEFAULT and pressing the enter (checkmark) key when prompted during start-up.
• Doing the steps that follow:
1 Press the ADV SETUP key.
2 Select the SETUP 1 MENU.
3 Select LOAD DEFAULT.
4 Press the enter (checkmark) key (refer to Figure 4) when prompted.
U.S. Export Classification: EAR 9E991 COLLINS AEROSPACE PROPRIETARY - Subject to the restriction on the title or cover page.
Original Issue Date: Aug 26/19 54H60-61-A154 Revision 1: May 29/20 Page 10
UTC Aerospace Systems Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
ALERT SERVICE BULLETIN
OLYMPUS Vp# 9.8 ENTER (CHECKMARK) KEY DO 49.1 NORTED BO0 ASB-54H60-61-A154-135358 Figure 4 Eddy Current Tester
(f) Press the MAIN/FILTER key to go back to the home screen.
Adjust the eddy current tester settings (refer to Table 3). Minor adjustments to these settings are permitted as necessary, to get optimum signal characteristics.
NOTE: Display erase or display persist, if used, must be set at no less than 2 seconds. Shorter intervals can make it difficult to measure amplitudes of crack signals relative to the null or reference level and can cause crack indications to be erased before the signal completes an up and down motion.
Table 3 Initial Settings for Surface Scan of Aluminum Parameter Description/Setting
ADV SETUP MENU (SETUP & SPECIAL) FRQ MODE (Column 1) SINGLE PRB DRV (Column 1) MEDIUM U.S. Export Classification: EAR 9E991 COLLINS AEROSPACE PROPRIETARY - Subject to the restriction on the title or cover page.
Original Issue Date: Aug 26/19 54H60-61-A154 Revision 1: May 29/20 Page 11
No text on this page: it may be a figure. Open the PDF to see it.