Copy · Ipeco Service Bulletin 063-25-20 · 15 pages

© Ipeco Holdings Ltd. Filed by the FAA in regulations.gov docket FAA-2025-1101; AD 2025-12-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'ccf32d40a2a9ae73dbf9048f6ed824a9fc8b96256e8d385c3f4695c3f9f02bd6'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

SERVICE BULLETIN Issue: 1 Date: 25 March 2025 Page 1 of 15 Form H518-1

EQUIPMENT / FURNISHINGS

FLIGHT COMPARTMENT

PACKER DISTRIBUTION

INSPECTION

SERVICE BULLETIN NUMBER 063-25-20 ISSUE 1 ISSUED BY:

CAGE CODE: K9075

IPECO HOLDINGS LTD

AVIATION WAY

SOUTHEND ON SEA SS2 6UN

UNITED KINGDOM TELEPHONE: +44 (0)1702 545118 EMAIL: Technicalsupport@ipeco.com IPECO HOLDINGS LTD IS A COMPANY REGISTERED IN ENGLAND AND WALES, COMPANY NO. 00672443 © Ipeco Holdings Ltd 2025. All rights reserved. This is a confidential and proprietary document. This document and all information contained herein is the sole property of and proprietary to Ipeco Holdings Ltd. and is supplied in confidence. No intellectual property rights are granted by the delivery of this document nor by the disclosure of its content. This document shall not be reproduced or disclosed to a third party nor shall it be used for any purpose other than that for which it is supplied without the express prior written consent of Ipeco Holdings Ltd.

Page 2OCROpen in PDF

peco

SERVICE BULLETIN SERVICE BULLETIN NO.

063-25-20

COMPILED BY R PERRIN D. CAIRNS

CHECKED BY TECHNICALLY APPROVED BY ¡GARDNER JDah J.DCasta

COMMERCIALLY APPROVED BY 063-25-20 Issue: 1 Date: 25 March 2025 Page 2 of 15 Form H518-1

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 3 of 15 Form H518-1 1 Planning Information A. Effectivity This Service Bulletin is applicable to the Ipeco 063 Series Crew Seats with the part numbers that follow:

Ipeco Part Numbers (Pilot Seat) Ipeco Part Numbers (Co-Pilot Seat) 3A063-0033-( )-( ) 3A063-0035-( )-( ) 3A063-0037-( )-( ) 3A063-0079-( )-( ) 3A063-0099-( )-( ) 3A063-0034-( )-( ) 3A063-0036-( )-( ) 3A063-0038-( )-( ) 3A063-0080-( )-( ) 3A063-0100-( )-( ) B. Concurrent Requirements SB063-25-15, SB063-25-16, SB063-25-17, SB063-25-18.

C. Reason There has been reports that after implementation of SB063-25-15, SB063-25-16, SB063-25-17 or SB063-25-18, as applicable, unwanted movement of the crew seat has occurred. The cause has been found to be that, if the number, type and position of the fore/aft tube packers is not equal, the seat does not always lock correctly.

This condition, if not corrected, can cause more examples of unwanted movement of the crew seat, and possible decreased control of the aircraft.

D. Description This Service Bulletin gives a full inspection procedure to make sure that:

- The number, type and position of the fore/aft tube packers is correct

- The direction of the fore/aft control lever is correct

- The seat locks in all track lock positions.

This Service Bulletin also gives instruction to correct the number, type and position of the fore/aft tube packers if necessary.

E. Compliance Recommendation Mandatory

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 4 of 15 Form H518-1 F. CAA Approval This Service Bulletin has been reviewed and approved by Ipeco. This modification does not revise the approved configuration under:

- CAA approval E12862 for the seat variant 3A063-0033/34.

- EASA Approval EASA.21O.10067247 REV.A for the seat variant 3A063- 0035/36/37/38.

- CAA approval E13323 for the seat variant 3A063-0079/80.

- EASA approval EASA.210.10067247 REV.A for the seat variant 3A063-0099/0100 and has been done under Ipeco ADOA approval UK.AP0126.

For installation on ATR aircraft, the technical content of this document is approved under the Authority of the DOA ref.EASA.21J.044.

G. Manpower The procedures in this Service Bulletin will take approximately 1 hour for each seat.

Note: This does not include:

- Time to schedule the work

- Time to examine the work

- Time to find the tools.

- Time to remove seat from aircraft.

H. Weight and Balance Not applicable I. Electrical Load Data Not applicable J. Software Accomplishment Summary Not applicable K. References Ipeco Component Manuals:

SM634 (CMM 25-11-21) SM635 (CMM 25-11-22) SM661 (CMM 25-11-46) SM706 (CMM 25-11-90)

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 5 of 15 Form H518-1 L. Publications Affected Ipeco Component Manuals:

SM634 (CMM 25-11-21) SM635 (CMM 25-11-22) SM661 (CMM 25-11-46) SM706 (CMM 25-11-90) M. Interchangeability of Parts Not applicable N. Warranty Statement The procedures of this Service Bulletin are not included in Ipeco warranty.

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 6 of 15 Form H518-1 2 Material Information A. Material Cost and Availability Required per seat:

Part Number Description Thickness (Inches) Quantity 3A063-0281 STOP 0.031 4 3A063-0509 PACKER 0.020 A/R For information about cost, lead time and availability of parts, operators can contact their nearest Ipeco Service Centre. Please include the information that follows with all chargeable orders:

- Title and Part Number

- Quantity Required

- Name of Airline/Operator

- Part Number of Equipment

- Serial Number of Equipment Operators not included in the regions below can send an order to:

Ipeco Holdings Limited Sales Department Aviation Way Southend-on-Sea SS2 6UN United Kingdom Telephone: +44 (0)1702 549371 E-mail: sales@ipeco.com

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 7 of 15 Form H518-1 Operators in the Americas region can send an order to:

Ipeco Inc 2275 Jefferson Street Torrance California 90501 USA Telephone: +1 310-783-4700 E-mail: sales@ipecoinc.com Operators in the Greater China region can send an order to:

Ipeco Service Centre Hong Kong Ltd.

21st Floor Nan Dao Commercial Building 359-361 Queen’s Road Central Hong Kong China Telephone: +852 2543 8039 E-mail: sales@ipeco.com.hk Operators in the South East Asia, Oceania and Japan Region can send an order to:

Ipeco Singapore Pte Ltd 690 West Camp Road JTC Aviation Two #08-01/02/03 Singapore 797523 Telephone: +65 6932 1555 E-mail: sales@ipeco.com.sg

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 8 of 15 Form H518-1 B. Industry Support Information For the applicable warranty statement refer to section 1.N. Warranty Statement.

For pricing of the components necessary to do this Service Bulletin, refer to section 2.A. Material Cost and Availability.

C. Material Necessary for Each Component Table 1 –Packer Reference Part Number Description Thickness (Inches) Quantity 1 3A063-0281 STOP 0.031 4 2 3A063-0509 PACKER 0.020 A/R* Note: * As Required to meet requirements of Section 3, Part B.

D. Material Necessary for Each Spare As Required / if needed E. Re-identified Parts / Existing Parts Accountability Not applicable F. Special Tooling – Price and Availability Not applicable G. Special Tooling Necessary to do this Service Bulletin Not applicable

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 9 of 15 Form H518-1 3 Accomplishment Instructions Note 1: To do the inspection, and possible correction procedures, in this Service Bulletin, the seat must be removed from the aircraft in accordance with applicable Aircraft Maintenance Manual (AMM).

Note 2: W hen you do the procedures i n this Service Bulletin , keep all removed items unless the instructions tell you to discard them.

Note 3: I tem number shown thus: - (*) refer to items shown in Table 1 of section

2.C. Material Necessary for Each Component. For example, ( 1) refers to item 1.

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 10 of 15 Form H518-1 Part A: Inspection of the Packers Installed on the Fore/Aft Tubes

1. Before you inspect the seat, remove it from the aircraft , in accordance with the applicable AMM. In the workshop, turn the seat head down so that you have a satisfactory view of the bottom of the seat and the fore/aft tubes.

2. Inspect the two fore/aft tubes for the number , type and position of the Stops (1) and the Packers (2). Refer to the instruction below and Figure 1.

a. Check four Stop s (1) 0.031 inch thick, are fitted one in each corner, next to the outer side of the bearing housing.

b. Check Packers (2) 0.020 inch thick, are fitted following the instruction below, an example is shown in Figure 1, to remove longitudinal movement.

Notes:

- The number of Packers (2) can be different for the fwd and aft positions to remove longitudinal movement.

- The number of Packers (2) in the fwd position must be equal in number and position on the two fore/aft tubes.

- The number of Packers (2) in the aft position must be equal in number and position on the two fore/aft tubes.

3. Put the seat in the full aft position and check the pin is properly engaged in the track lock without longitudinal movement.

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 11 of 15 Form H518-1

4. Put the seat in the full forward position and check the pin is properly engaged in the track lock without longitudinal movement.

5. If the Stops (1) and the Packers (2) are not equal in number, type and/or position or there is longitudinal movement, c ontinue to Part B . If the Stops (1) and the Packers (2) are equal in number, type and position and there is no longitudinal movement go to Part C.

SERVICE BULLETIN 063-25-20

Issue: 1 Date: 25 March 2025 Page 12 of 15 Form H518-1 Part B: Removal and Installation of Packers and Stops.

1. If not already done so, make sure that the seat is removed from the aircraft , in accordance with the applicable AMM. In the workshop, turn the seat head down so that you have a satisfactory view of the bottom of the seat and the fore/aft tubes.

Note:

- It is not necessary to disassemble the seat structure to do the procedures in this Service Bulletin. You can get access to the stops (1) and packers (2) from the bottom of the seat.

2. R emove and keep the four Stops (1) and all Packers (2) from the fore/aft tubes.

To remove the Stops (1) and Packers (2) from the f ore/aft tubes, open the installation slot, part of the Stops (1) and Packers (2), then remove the Stops (1) and Packers (2) from the fore/aft tubes.

Note:

- The Stops (1) and Packers (2) are made from Nylon 6 or 66. You can easily open them with no risk of damage.

3. Install the Stops (1) one in each corner, adjacent to the outer side of the bearing housing, as shown in Figure 1. Do this before you install the packers (2).

To install the Stops (1) onto the f ore/aft tubes, open the installation slot, part of the Stops (1), then install the Stops (1) onto the fore/aft tubes.

Note:

- The direction of the installation slot of the Stops (1) and Packer (2) after assembly is not important.

4. Refer to the instruction below and Figure 1 to install the Packers (2) to ensure that the pins engage properly in the track lock.

To install the Packers (2) onto the fore tubes, put the seat in the full aft position and add packers (2) until the pin is properly engaged in the track lock without longitudinal movement.

To install the Packers (2), open the installation slot, part of the Packers (2), then install the Packers (2) onto the fore tubes.

Pages 13–15 of 15