TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '40dc918516e4d1406ebaa12da87063e5a8340b3a8c7f8507518bdce3e6a13c6d' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '40dc918516e4d1406ebaa12da87063e5a8340b3a8c7f8507518bdce3e6a13c6d' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ERRATA CORRIGE
Please find here attached the pages that have to be replaced in the basic Service Bulletin n°109EP-173 Rev. B.
PAGE 25 “ACCOMPLISHMENT INSTRUCTIONS Step 65”
Was:
• Move the collective stick three or four times. Ma ke sure that the collective controls are free to operate without friction against the structure.
Becomes:
• Move the collective stick three or four times. Ma ke sure that the collective controls are free to operate without friction against the structure.
• In accordance with MM Paragraph 67-11-16, adjust fixed friction.
PAGE 47 “ACCOMPLISHMENT INSTRUCTIONS Step 72”
Was:
• Move the collective stick three or four times. Ma ke sure that the collective controls are free to operate without friction against the structure.
Becomes:
• Move the collective stick three or four times. Ma ke sure that the collective controls are free to operate without friction against the structure.
• In accordance with MM Paragraph 67-11-16, adjust fixed friction.
N ° 109EP-173 D ATE: November 10, 2020 REV. : B - August 24, 2023 P age 1 of 108 TITLE ATA 53 - CENTRAL FUSELAGE FRAME ASSY AT STA 1815, INSPECTION, REPAIR
AND REINFORCEMENT OF
REVISION LOG Revision B is issued in order to introduce the following changes:
- Amend minor errors;
- Introduce Part IV and Part V.
Revision bars identify changes.
An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT
SERVICE BULLETIN
S.B. N°109EP-173 ALERT DATE: November 10, 2020 Page 2 of 108 REVISION: B - August 24, 2023
1. PLANNING INFORMATION A. EFFECTIVITY All the A109E helicopters from S/N 11001 thru S/N 11674 included.
B. COMPLIANCE NOTE The helicopter’s posts that have been repaired in accordance with Part II (LH side) or Part III (RH side) of this Service Bulletin, or in accordance with repair drawing P/N 109-0952-67-117 (LH side) or P/N 109-0952-67-102 (RH side), shall be inspected in accordance with Part I after they have accumulated more than 1000 FH of 3500 landings since repair.
NOTE The helicopter’s posts that have been reinforced in accordance with Part IV (LH side) or Part V (RH side) of this Service Bulletin are no longer affected by the relevant inspection (ref. Part I).
Helicopter that have accumulated more than 1000FH or 3500 landings, whichever occurs first:
PART I:
Within and not later than 100FH from the issuance of this SB and every 100FH thereafter.
PART II AND PART III:
- Within and not later than the next 25FH if the length of crack on the FWD CAP does not exceed 50 mm and no other damages are detected in the affected area.
S.B. N°109EP-173 ALERT DATE: November 10, 2020 REVISION: B - August 24, 2023 Page 3 of 108 NOTE If the length of the cracks exceeds the boundaries of the FWD CAP, INNER FORWARD ANGLE or WEB (ref.
Figure 1), the repair scheme reported in Part II and III of this Service Bulletin could not be applicable. In this case contact Leonardo Engineering Dept engineering.support.lhd@leonardo.com before the next flight.
- Before the next flight if the length of crack on t he FWD CAP is greater than 50 mm and/or any other crack(s) are detected.
PART IV AND PART V:
Within and not later than August 31, 2026.
Helicopter that have accumulated up to 1000FH or 3500 landings, whichever occurs first:
PART I:
Within and not later 100FH upon the achievement of 1000FH or 3500 landings and every 100FH thereafter.
PART II AND PART III:
- Within and not later than the next 25FH if the length of crack on the FWD CAP does not exceed 50 mm and no other damages are detected in the affected area.
NOTE If the length of the cracks exceeds the boundaries of the FWD CAP, INNER FORWARD ANGLE or WEB (ref.
Figure 1), the repair scheme reported in Part II and III of this Service Bulletin could not be applicable. In this case contact Leonardo Engineering Dept engineering.support.lhd@leonardo.com before the next flight.
- Before the next flight if the length of crack on t he FWD CAP is greater than 50 mm and/or any other crack(s) are detected.
PART IV AND PART V:
Within and not later than August 31, 2026.
S.B. N°109EP-173 ALERT DATE: November 10, 2020 Page 4 of 108 REVISION: B - August 24, 2023 C. CONCURRENT REQUIREMENTS N.A.
D. REASON This Service Bulletin is issued in order to provide the necessary instruction on how to perform an inspection to detect cracks in the center fuselage at intersection of lateral pylon (LH and RH side) with floor spar, and, in case of findings, to repair it. Moreover, the instructions for corrective actions (reinforcements) are provided.
E. DESCRIPTION Some occurrences of cracks have been found in the fuselage of the Leonardo S.p.a.
A109E helicopters at the intersection of the lateral pylon with the floor spar at the STA 1815, either in the LH and RH side.
In Part I of this Service Bulletin are given the instruction to perform an inspection in the area affected by the possible cracks, in Part II are given the instruction for LH side fuselage repair and in Part III are given the instruction for RH side fuselage repair.
Revision B is issued to provide the instruction for LH side fuselage reinforcement (Part IV) and for RH side fuselage reinforcement (Part V).
F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr.
EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked with Local Aviation Authority.
EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
G. MANPOWER To comply with this Service Bulletin the following MMH are deemed necessary:
Part I: approximately 6 (six) hours;
Part II: approximately 120 (one hundred and twenty) hours;
Part III: approximately 120 (one hundred and twenty) hours.
S.B. N°109EP-173 ALERT DATE: November 10, 2020 REVISION: B - August 24, 2023 Page 5 of 108 Part IV: approximately 120 (one hundred and twenty) hours;
Part V: approximately 120 (one hundred and twenty) hours.
MMH are based on hands-on time and can change with personnel and facilities available.
H. WEIGHT AND BALANCE PART I, II and III:
N.A.
PART IV WEIGHT (kg) 0.91 ARM (mm) MOMENT (kgmm) LONGITUDINAL BALANCE 1880 1710 PART V Negligible.
S.B. N°109EP-173 ALERT DATE: November 10, 2020 Page 6 of 108 REVISION: B - August 24, 2023 I. REFERENCES I.1 PUBLICATIONS
DATA MODULE DESCRIPTION PART DM01 00-20-1 Helicopter safety All DM02 06-40-1 Access panels and doors II, III, IV, V DM03 00-10-4 Connection/disconnection of external electrical power
II, III, IV, V DM04 00-10-8 Connection/disconnection of external hydraulic power
II, III, IV, V DM05 25-11-9 Crew seats - removal/installation II, III, IV, V DM06 25-21-12 Forward seat - removal/installation II, III, IV, V DM07 21-21-1 Air distribution system II, III, IV, V DM08 52-11-9 LH/RH cockpit doors - removal/installation
II, III, IV, V DM09 67-11-1 Collective pitch control system II, IV DM10 67-11-9 Collective pitch control lever - removal/installation II, IV DM11 25-81-7 Cockpit soundproofing panels - removal/installation All DM12 25-81-9 Passenger soundproofing panels - removal/installation All DM13 52-71-6 Operational test of cockpit/passenger compartment caution system
II, III, IV, V DM14 67-12-1 Cyclic pitch control system III, V DM15 67-00-12 Control tube - general maintenance II, III, IV, V DM16 07-30-1 Hoisting of complete helicopter II, III, IV, V DM17 07-30-2 Hoisting of helicopter without main rotor
II, III, IV, V DM18 67-00-25 Collective pitch control adjustment II, IV DM19 67-00-26 Cyclic pitch control adjustment III, V DM20 67-11-16 Fixed friction adjustment II; IV I.2 ACRONYMS AR As Required DOA Design Organization Approval EASA European Aviation Safety Agency LHD Leonardo Helicopters Division LS Local Supply DM Data Module FH Flight Hours
S.B. N°109EP-173 ALERT DATE: November 10, 2020 REVISION: B - August 24, 2023 Page 7 of 108 MMH Maintenance Man Hours N.A. Not Applicable P/N Part Number SB Service Bulletin S/N Serial Number I.3 ANNEX N.A.
J. PUBLICATIONS AFFECTED A109E-MM Maintenance Manual A109E Helicopter Model.
A109E-MPM Maintenance Planning Manual A109E Helicopter Model.
3C-A-ASRP-00-X - AW119/A109 Series Air Vehicle Structural Repair Publication.
K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.B. N°109EP-173 ALERT DATE: November 10, 2020 Page 8 of 108 REVISION: B - August 24, 2023
2. MATERIAL INFORMATION A. REQUIRED MATERIALS A.1 PARTS PART I N.A.
PART II # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 1 109-0952-67-117 REPAIR ASSY, LH REF . - 2 109-0320-90-207 109-0320-90-207A1 Cap, forward LH 1 .. (1) - 3 109-0320-90-7 Panel REF .. (1)(2) - 4 109-0320-90-507 Cap, forward LH 1 .. (3) - 5 109-0320-90-505 Panel REF .. (3)(4) - 6 109-0952-67-119 Angle 1 .. (17) 709-052L1 7 109-0952-67-121 Internal butt-strap 1 .. 709-052L1 8 109-0952-67-123 External butt-strap 1 .. 709-052L1 9 109-0952-67-125 Web 1 .. (18) 709-052L1 10 109-0360-88-109 Seal assy, co-pilot door 1 .. (5) 709-052L1 11 A233A001B AW004FE001B Fastener, seal 36 .. 709-052L1 12 109-0360-86-109 Seal assy, LH passenger door 1 .. (5) 709-052L1 13 A879A05L150 Rivet, solid 5 .. 709-052L1 14 MS27039-1-08 Screw 8 .. 709-052L1 15 MS20426AD3-5 Rivet, solid, 100° countersunk head 0.1kg .. 709-052L1 16 MS20426AD3-6 Rivet, solid, 100° countersunk head 0.1kg .. 709-052L1 17 MS20426AD4-5 Rivet, solid, 100° countersunk head 0.1kg .. 709-052L1 18 MS20426AD5-5 Rivet, solid, 100° countersunk head 0.1kg .. 709-052L1 19 MS20426AD5-6 Rivet, solid, 100° countersunk head 0.1kg .. 709-052L1 20 MS20426AD5-8 Rivet 0.1kg .. 709-052L1 21 MS20426AD5-9 Rivet 0.1kg .. 709-052L1 22 MS20470AD5-5 Rivet, solid, universal head 0.1kg .. 709-052L1 23 MS20470AD5-6 Rivet, solid, universal head 0.1kg .. 709-052L1 24 MS20470AD5-7 Rivet 0.1kg .. 709-052L1 25 MS21069L08 Nut plate, self-locking 1 .. 709-052L1 26 MS21071L08 Nut plate, self-locking 1 .. 709-052L1 27 NAS9301B-4-02 Rivet, blind, protruding head 100 .. 709-052L1 28 NAS9301B-4-03 Rivet, blind, protruding head 20 .. 709-052L1 29 NAS9301B-4-04 Rivet, blind, protruding head 10 .. 709-052L1 30 MS24665-151 Cotter Pin 2 .. 709-052L1 31 MS24665-155 Cotter Pin 2 .. 709-052L1 32 MS20615-4M3 Rivet, universal head 0.1kg .. 709-052L1 33 MS20427M4-3 Rivet, 100° countersunk head 0.1kg .. 709-052L1 34 MS20600AD4-3 MS20600AD4W3 Rivet, blind 80 .. 709-052L1 35 NAS1720H4L4A Rivet, blind 80 .. 709-052L1 36 NAS1721H4L2A Rivet, blind 30 .. 709-052L1
S.B. N°109EP-173 ALERT DATE: November 10, 2020 REVISION: B - August 24, 2023 Page 9 of 108 # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 37 NAS1721H4L4A Rivet, blind 20 .. 709-052L1
PART III # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 38 109-0952-67-102 REPAIR ASSY, RH REF . - 39 109-0320-90-208 109-0320-90-208A1 Cap, forward RH 1 .. 709-052L2 40 109-0320-90-8 Panel REF .. (6) - 41 109-0952-67-111 Angle 1 .. (16) 709-052L2 42 109-0952-67-113 Internal butt-strap 1 .. 709-052L2 43 109-0952-67-115 External butt-strap 1 .. 709-052L2 44 109-0952-67-109 Web 1 .. (15) 709-052L2 45 109-0360-88-110 Seal assy, co-pilot door 1 ... (7) 709-052L2 46 A233A001B AW004FE001B Fastener, seal 36 .. 709-052L2 47 109-0360-86-110 Seal assy, LH passenger door 1 .. (7) 709-052L2 48 A879A05L150 Rivet, solid 5 .. 709-052L2 49 MS20426AD4-5 Rivet, solid, 100° countersunk head 0.1kg .. 709-052L2 50 MS20470AD5-5 Rivet, solid, universal head 0.1kg .. 709-052L2 51 MS20470AD5-6 Rivet, solid, universal head 0.1kg .. 709-052L2 52 MS20470AD5-7 Rivet 0.1kg .. 709-052L2 53 MS20470AD5-8 Rivet 0.1kg .. 709-052L2 54 MS20470AD5-9 Rivet 0.1kg ... 709-052L2 55 NAS9301B-4-02 Rivet, blind, protruding head 100 .. 709-052L2 56 NAS9301B-4-03 Rivet, blind, protruding head 20 .. 709-052L2 57 NAS9301B-4-04 Rivet, blind, protruding head 10 .. 709-052L2 58 MS24665-151 Cotter Pin 4 .. 709-052L2 59 MS20615-4M3 Rivet, universal head 0.1kg .. 709-052L2 60 MS20615-4M4 Rivet, 100° countersunk head 0.1kg .. 709-052L2 61 MS20600AD4-3 MS20600AD4W3 Rivet, blind 80 .. 709-052L2 62 NAS1720H4L4A Rivet, blind 80 .. 709-052L2 63 NAS1721H4L2A Rivet, blind 30 ... 709-052L2 64 NAS1721H4L4A Rivet, blind 20 .. 709-052L2
PART IV # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 65 109G5330R01-201 LATERAL MOUNTING REINFORCEMENT REF . - 66 109-0320-90-207 109-0320-90-207A1 Cap, forward LH 1 .. (1)(12) 709-052L3 67 109-0320-90-7 Panel REF .. (1)(2) - 68 109-0320-90-507 Cap, forward LH 1 .. (3)(12) - 69 109-0320-90-505 Panel REF .. (3)(4) - 70 109-0952-67-123 External Butt-Strap 1 .. 709-052L3 71 109-0952-67-125 Web 1 .. (12)(18) 709-052L3 72 109G5307P39-113 Angle LH 1 .. 709-052L3 73 109G5307P39-115 Left Cap 1 .. 709-052L3 74 109G5307P39-117 Doubler 1 .. 709-052L3 75 109G5330A25-101 Stiffener Machined LH 1 .. 709-052L3 76 109G5330R01-205 Doubler LH 1 .. 709-052L3 77 A879A05L150 Rivet 6 .. 709-052L3 78 CR2245-4-2 Rivet 1 .. 709-052L3 79 CR2245-4-5 Rivet 2 .. 709-052L3
S.B. N°109EP-173 ALERT DATE: November 10, 2020 Page 10 of 108 REVISION: B - August 24, 2023 # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 80 CR2245-5-3 Rivet 1 .. 709-052L3 81 MS20426AD3-5 Rivet 0.1kg .. 709-052L3 82 MS20426AD4-5 Rivet 0.1kg .. 709-052L3 83 MS20426AD5-5 Rivet 0.1kg .. 709-052L3 84 MS20470AD4-5 Rivet 0.1kg .. 709-052L3 85 MS20470AD5-5 Rivet 0.1kg .. 709-052L3 86 MS21071L08 Nut Plate 2 .. 709-052L3 87 NAS1739B4-3 Rivet 8 .. 709-052L3 88 NAS9301B-4-02 Rivet 80 .. 709-052L3 89 NAS9301B-4-03 Rivet 28 .. 709-052L3 90 NAS9301B-4-04 Rivet 12 .. 709-052L3 91 NAS9301B-5-02 Rivet 12 .. 709-052L3 92 NAS9301B-5-03 Rivet 10 .. 709-052L3 93 NAS9301B-5-04 Rivet 10 .. 709-052L3 94 109G5330R01-203 ANGLE REPAIR INSTALLATION LH REF .. - 95 109-0952-67-119 Angle 1 … (12)(17) 709-052L3 96 109-0952-67-121 Internal Butt-Strap 1 … 709-052L3 97 MS20470AD5-5 Rivet 0.1kg … 709-052L3 PART V # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 98 109G5330R01-202 LATERAL MOUNTING REINFORCEMENT REF . - 99 109-0320-90-208 109-0320-90-208A1 FWD Cap RH 1 .. (12) 709-052L3 100 109-0320-90-8 Panel REF .. (6) - 101 109-0952-67-109 Web 1 .. (12)(15) 709-052L3 102 109-0952-67-115 External Butt-Strap 1 .. 709-052L3 103 109G5307P39-114 Angle LH 1 .. 709-052L3 104 109G5307P39-116 Left Cap 1 .. 709-052L3 105 109G5307P39-117 Doubler 1 .. 709-052L3 106 109G5330A25-102 Stiffener Machined LH 1 .. 709-052L3 107 109G5330R01-206 Doubler LH 1 .. 709-052L3 108 A879A05L150 Rivet 6 .. 709-052L3 109 CR2245-4-2 Rivet 1 .. 709-052L3 110 CR2245-4-5 Rivet 2 .. 709-052L3 111 CR2245-5-3 Rivet 1 .. 709-052L3 112 MS20426AD3-5 Rivet 0.1kg .. 709-052L3 113 MS20426AD4-5 Rivet 0.1kg .. 709-052L3 114 MS20426AD5-5 Rivet 0.1kg .. 709-052L3 115 MS20470AD4-5 Rivet 0.1kg .. 709-052L3 116 MS20470AD5-5 Rivet 0.1kg .. 709-052L3 117 MS21071L08 Nut Plate 2 .. 709-052L3 118 NAS1739B4-3 Rivet 8 .. 709-052L3 119 NAS9301B-4-02 Rivet 80 .. 709-052L3 120 NAS9301B-4-03 Rivet 28 .. 709-052L3 121 NAS9301B-4-04 Rivet 12 .. 709-052L3 122 NAS9301B-5-02 Rivet 12 .. 709-052L3 123 NAS9301B-5-03 Rivet 10 .. 709-052L3 124 NAS9301B-5-04 Rivet 10 .. 709-052L3 125 109G5330R01-204 ANGLE REPAIR INSTALLATION LH REF .. - 126 109-0952-67-111 Angle 1 … (12)(16) 709-052L3 127 109-0952-67-113 Internal Butt-Strap 1 … 709-052L3 128 MS20470AD5-5 Rivet 0.1kg … 709-052L3
S.B. N°109EP-173 ALERT DATE: November 10, 2020 REVISION: B - August 24, 2023 Page 11 of 108 A.2 CONSUMABLES The following consumable materials, or equivalent, are necessary to accomplish this Service Bulletin:
# Spec./LHD code number DESCRIPTION Q.TY NOTE PART 129 199-05-002 TY I, Cl 2 (cod. 900000581) Adhesive EA9309.3NA (C100) AR (8) II, III, IV, V 130 199-05-004 TY II, Cl 2 (cod. 900001586) Sealant PROSEAL 890B2 (C148) AR (8)(11) II, III, IV, V 131 AWMS05-001TY I, Cl B, Gr 2 (cod. 999999999000015245) Sealant MC780 B-2 (C501) AR (8)(11) II, III, IV, V 132 MIL-PRF-23377 TY I, Cl C2 (cod. 999999999000010181) Primer, epoxy-polyamide (446) AR (8) II, III, IV, V 133 Commercial Soft lint-free cloth (011) AR (8) All 134 MIL-PRF-680 TY II Cleaning solvent (C287) AR (8) All 135 Commercial Masking tape (C064) AR (8) II, III, IV, V 136 Commercial Scotch-Brite (C015) AR (8) II, III, IV, V Refer also to AMDI for the consumable materials required to comply with the MM Paragraphs referenced in the accomplishment instructions.
A.3 LOGISTIC MATRIX In order to apply this Service Bulletin, the following Logistic P/N can be ordered in accordance with the applicable notes:
LOGISTIC P/N Q.TY (PER HELO) NOTE PART 709-052L1 1 (9) II 709-052L2 1 (10) III 709-052L3 1 (13) (14) IV, V 109-0320-90-207 or 109-0320-90-207A1 1 (1) II, IV 109-0320-90-7 1 (1)(2) II, IV 109-0320-90-507 1 (3) II, IV 109-0320-90-505 1 (3)(4) II, IV 109-0320-90-8 1 (6) III, V 109-0320-90-208 or 109-0320-90-208A1 1 (12) V NOTE
(1) Item required for helicopters from S/N 11001 thru S/N 11600.
(2) This item can be obtained reworking the existing panel P/N 109-0320-90-7.
(3) Item required for helicopters from S/N 11601 thru S/N 11674.
(4) This item can be obtained reworking the existing panel P/N 109-0320-90-505.
(5) Seal assy co-pilot door P/N 109-0360-88-109 and seal assy LH passenger door P/N 109-0360-86-109 will be obtained from gasket P/N A232A001BB. Q.ty 7 m are required to comply with Part II of this Service Bulletin.
(6) This item can be obtained reworking the existing panel P/N 109-0320-90-8.
(7) Seal assy pilot door P/N 109-0360-88-110 and seal assy RH passenger door P/N 109-0360-86-110 will be obtained from gasket P/N A232A001BB. Q.ty 7 m are