Copy · U.S. DOT/FAA - AgustaWestland BT No 139-368 · 11 pages

© Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2014-0478; AD 2014-07-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '8d8867e01aa20a8a57a1e98f275b71ff927ad019676be303e9a266009f664a0c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

BOLLETTINO TECNICO N° 139-368 The technical content of this document is approved under the authority of DOA nr. EASA.21J.005 DATE March 19, 2014 REV. / Compliance with this bulletin is:

Page 1 of 9 SUBJECT: INSPECTION / REPLACEMENT OF LOWER HALF SCISSOR SPHERICAL BEARING P/N 3G6230V00654.

REASON: to identify and replace potentially defective lower half scissor spherical bearings.

HELICOPTERS AFFECTED:

Part I: all AB139/AW139 helicopters installing MR Rotating Scissors P/N 3G6230A00733 with S/N listed in Table 1 or repaired installing a lower half scissor spherical bearing P/N 3G6230V00654 with S/N listed in Table 2.

Part II: all MR Rotating Scissors P/N 3G6230A00733 with S/N listed in Table 1 and all lower half scissor spherical bearing P/N 3G6230V00654 with S/N listed in Table 2 and all MR Rotating Scissors P/N 3G6230A00733 repaired installing a lower half scissor spherical bearing P/N 3G6230V00654 with S/N listed in Table 2 , either installed or kept in stock.

AgustaWestland S.p.A Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy T el.: +39 0331 229111 - Fax: +39 0331 229605/222595

MANDATORY An appropriate entry should be made in the aircraft log book upon accomplishment.

If ownership of aircraft has changed, please, forward to new owner.

ALERT ALERT

B.T. 139-368 Page 2 of 9 COMPLIANCE:

Part I: within five (5 ) flight hours or one (1) week from receipt of this Bollettino Tecnico, whichever comes first, and then every five (5) flight hours up to accomplishment of Part II.

Part II: within fifty (50) flight hours or thirty (30) days from receipt of this Bollettino Tecnico whichever comes first.

DESCRIPTION: the supplier of the lower half scissor spherical bearing P/N 3G6230V00654 has indicated a list of S/N that are potentially affected by a quality issue. Scope of this Bollettino Tecnico is to identify and replace potentially defective lower half scissor spherical bearings in service establishing a tight interim inspection schedule to reduce the impact on aircraft operations in service.

REQUIRED MANPOWER: it is estimated that, in order to accomplish this Bollettino Tecnico the following maintenance man-hours (MMH) are necessary:

Part I: one (1) MMH;

Part II: two (2) MMH.

Man-hours are based on hands-on time and may vary with personnel and facilities available.

WARRANTY: Owners/Operators who comply with the COMPLIANCE INSTRUCTIONS, no later than the applicable date in the “Compliance section”, will be eligible to receive replacements parts on a “free of charge basis”.

NOTE: Customers who fail to comply with the instructions in this Bollettino Tecnico before the compliance date are not eligible for the aforementioned special policy.

Issue relevant W.M.M. form ( (W)arranty Claim (M)aintenance Work Order (M)alfunction Report ) to your Warranty Administration Dpt.”

B.T. 139-368 Page 3 of 9 REQUIRED MATERIALS: the following materials, necessary to accomplish Part II of this Bollettino Tecnico, can be requested to AgustaWestland:

P/N DESCRIPTION Q.TY Note 3G6230V00654 Lower half scissors spherical bearing AR (1) Moreover the following consumable materials, or equivalent, are necessary to comply with this Bollettino Tecnico:

Spec./AW code number DESCRIPTION Q.TY Note MIL-L-19537C Acrylic Lacquer (C081) AR Local supply Notes:

(1) As an alternative to lower half scissor spherical bearings, MR rotating scissors P/N 3G6230A00733 may be supplied.

Refer to AMDI for the consumable materials necessary to comply with the AMP data modules referenced in Part II of this Bollettino Tecnico.

SPECIAL TOOLS: the following special tools are necessary to accomplish this Bollettino Tecnico:

P/N DESCRIPTION Q.TY NOTES RMGE-DS-06-2010-LH or an approved alternative Platform (GG-01-00) AR

(2) RMGE-DS-06-2010-RH or an approved alternative Platform (GG-02-00) Commercial Permanent black in felt pen Local supply Commercial Etch pen Local supply Notes:

(2) Refer to Illustrated Tools and Equipment Publication (ITEP). See data modules 39-A-GG-01-00-00A-066A-A and 39-A-GG-02-00-00A-066A-A.

Refer to Illustrated Tools and Equipment Publication (ITEP) also for other special tools required to comply with the AMP data modules referenced in Part II of this Bollettino Tecnico.

B.T. 139-368

Page 4 of 9

WEIGHT AND BALANCE CHANGES: N.A.

REFERENCES:

 AW139 Aircraft Maintenance Data Information (AMDI)  AW139 Aircraft Maintenance Publication (AMP)  AW139 Illustrated Tools and Equipment Publication (ITEP) PUBLICATIONS AFFECTED: N.A.

COMPLIANCE INSTRUCTIONS:

Part I

1. Prepare the helicopter for a safe ground maintenance. Disconnect the battery and all the electrical power sources and/or the external power supply. Refer to AMP, see DM n° 39-A-00-20-00-00A-120A-A.

2. Put the platforms (GG-01-00 and GG-02-00), or approved alternative s, adjacent to the left and to the right side of the fuselage, respectively.

3. Open access door 473AL. Refer to AMP, see DM n° 39-A-06-41-00-00A-010A-A.

4. With reference to Figure 1, get access to the MR area and perform a general v isual inspection of the MR rotating scissors P/N 3G6230A00733 and an operational check for play and wear of the lower half scissors spherical bearing P/N 3G6230V00654 (refer to section A-A), paying particular attention to the bearing staking condition; to do this manually move the bottom rotating scissors along the axis of the spherical bearing.

4.1. If no unusual play and/or wear is detected , no further action is required. Go to step 5.

4.2. If unu sual play and/or wear is detected, perform a detailed inspection for condition, damage and play of the MR rotating scissors according to steps 9 through 12.9 of AMP DM n° 39-C-62-31-00-00A-286C-A.

4.2.1. If play is within limits, no further action is required. Go to step 5.

B.T. 139-368

Page 5 of 9

4.2.2. If play is beyond limits or wear is detected, report findings to AW139 Product Support Engineering (aw139.mbx@agustawestland.com).

5. Close access door 473AL. Refer to AMP, see DM n° 39-A-06-41-00-00A-010A-A.

6. Remove the platforms from left and right sides of the fuselage.

7. Return helicopter to flight configuration and record for compliance with Part I of this Bollettino Tecnico on the helicopter logbook.

Part II

1. Prepare the helicopter for a safe ground maintenance. Disconnect the batte ry and all the electrical power sources and/or the external power supply. Refer to AMP, see DM n° 39-A-00-20-00-00A-120A-A.

2. Put the platform (GG-01-00), or an approved alternative, adjacent to the left side of the fuselage.

3. Open access door 473AL. Refer to AMP, see DM n° 39-A-06-41-00-00A-010A-A.

NOTE As an alternative to the replacement of lower half scissor spherical bearing P/N 3G6230V00654 described at following step 4 , it is allowed to replace MR rotating scissors according to AMP DM n° 39-C- 62-31-02-00A-520A-A / 39 -C-62-31-02-00A-720A-A installing new components not affected by this Bollettino Tecnico according to Table 1.

Send the affected MR rotating scissors P/N 3G6230A00733 (the ones removed or kept in stock) to AgustaWestland to perform the lower half scissor spherical bearing replacement and to mark the letter “R” after the S/N of the MR rotating scissor P/N 3G6230A00733.

B.T. 139-368 Page 6 of 9

4. With reference to figure 1, get access to the MR rotating scissors area and replace the lower half scissor spherical bearing as described in the following procedure:

4.1. Remove and disassemble the MR rotating scissors. Refer to to AMP, see DM n° 39-C-62-31-02-00A-520A-A / 39C-62-31-02-00A-530A-B.

4.2. Replace affected lower half scissor spherical bearing P/N 3G6230V00654 according to AMP DM n° 39-C-62-31-02-03A-920A-B.

NOTE Discard all the affected lower half scissor spherical bearings P/N 3G6230V00654 with S/N as per Table 2 removed at step 4.2. and kept in stock.

4.3. Mark on MR lower scissor lever assy P/N 3G6230A00934 the letter “R” after th e S/N of the MR rotating scissor P/N 3G6230A00733.

4.4. Mark the letter “R” on MR lower scissor P/N 3G6230A00934 by means of permanent black ink felt pen and apply Acrylic Lacquer (C081) or by means of etch pen.

4.5. Assemble and install the MR rotating scissors. Refer to to AMP, see DM n° 39- C-62-31-02-00A-710A-B / 39-C-62-31-02-00A-720A-A

5. Close the access door 473AL. Refer to AMP, see DM n° 39-A-06-41-00-00A-010A- A.

6. Remove the platform from the left side of the fuselage.

7. Return helicopter to flight configuration a nd record for compliance with Part II of this Bollettino Tecnico on the helicopter logbook and mark the letter “R” after S/N on the MR rotating scissor logcard.

B.T. 139-368

Page 7 of 9

Figure 1 BETTER BETTER

B.T. 139-368

Page 8 of 9 TABLE 1 MR Rotating Scissors P/N 3G6230A00733 affected S/N V1 V2 V3 V4 V5 V7 V8 V9 V10 V11 V12 V13 V14 V15 V16 V17 V18 V19 V20 V21 V22 V23 V24 V25 V26 V27 V28 V29 V30 V31 V32 V33 V34 V35 V36 V37 V38 V39 V40 V41 V42 V43 V44 V45 V46 V47 V48 V49 V50 V51 V52 V53 V54 V55 V56 V57 V58 V59 V60 V61 V62 V63 V64 V65 V66 V67 V68 V69 V70 V71 V72 V73 V74 V75 V76 V77 V78 V79 V80 V81 V82 V83 V84 V85 V86 V87 V88 V89 V90 V91 V92 V93 V94 V95 V96 V97 V98 V99 V100 V101 V102 V103 V104 V105 V106 V107 V108 V109 V110 V111 V112 V113 V114 V115 V116 V117 V118 V119 V120 V121 V122 V123 V124 V125 V126 V127 V128 V129 V130 V131 V132 V133 V134 V135 V136 V137 V138 V139 V140 V141 V142 V143 V144 V145 V146 V147 V148 V149 V150 V151 V152 V153 V154 V155 V156 V157 V158 V159 V160 V161 V162 V163 V164 V165 V166 V167 V168 V169 V170 V171 V172 V173 V174 V175 V176 V177 V178 V179 V180 V181 V182 V183 V184 V185 V186 V187 V188 V189 V190 V191 V192 V193 V194 V195 V196 V197 V198 V199 V200 V201 V202 V203 V204 V205 V206 V207 V208 V209 V210 V211 V212 V213 V214 V215 V216 V217 V218 V219 V220 V221 V222 V223 V224 V225 V226 V227 V228 V229 V230 V231 V232 V233 V234 V235 V236 V237 V238 V239 V240 V241 V242 V243 V244 V245 V246 V247 V249 V250 V251 V252 V253 V254 V255 V256 V257 V258 V259 V260 V261 V262 V263 V264 V265 V266 V267 V268 V269 V270 V271 V272 V273 V274 V275 V276 V277 V278 V279 V280 V281 V282 V283 V284 V285 V286 V287 V288 V289 V290 V291 V292 V293 V294 V295 V302 V303 V304 V305 V432 V433 V434 V435 V436 V437 V438 V439 V440 V441

B.T. 139-368

Page 9 of 9 TABLE 2 Lower Half Scissor Spherical Bearing P/N 3G6230V00654 affected S/N KC1 KC2 KC3 KC4 KC5 KC6 KC7 KC8 KC10 KC11 KC12 KC13 KC14 KC15 KC16 KC17 KC18 KC19 KC20 KC21 KC22 KC23 KC24 KC25 KC26 KC27 KC28 KC29 KC30 KC31 KC32 KC33 KC34 KC35 KC36 KC37 KC38 KC39 KC40 KC41 KC42 KC43 KC44 KC45 KC46 KC47 KC48 KC49 KC50 KC51 KC52 KC53 KC54 KC55 KC56 KC57 KC58 KC59 KC10000 KC10001 KC10002 KC10003 KC10004 KC10005 KC10006 KC10007 KC10008 KC10009 KC10010 KC10011 KC10012 KC10013 KC10014 KC10015 KC10016 KC10017 KC10018 KC10019 KC10020 KC10021 KC10022 KC10023 KC10024 KC10025 KC10026 KC10027 KC10028 KC10029 KC10030 KC10031 KC10032 KC10033 KC10034 KC10035 KC10036 KC10037 KC10038 KC10039 KC10040 KC10041 KC10042 KC10043 KC10044 KC10045 KC10046 KC10047 KC10048 KC10049 KC10050 KC10051 KC10052 KC10053 KC10054 KC10055 KC10056 KC10057 KC10058 KC10059 KC10060 KC10061 KC10062 KC10063 KC10064 KC10065 KC10066 KC10067 KC10068 KC10069 KC10070 KC10071 KC10072 KC10073 KC10074 KC10075 KC10076 KC10077 KC10078 KC10079 KC10080 KC10081 KC10082 KC10083 KC10084 KC10085 KC10086 KC10087 KC10088 KC10089 KC10090 KC10091 KC10092 KC10093 KC10094 KC10095 KC10096 KC10097 KC10098 KC10099 KC10100 KC10101 KC10102 KC10103 KC10104 KC10105 KC10106 KC10107 KC10108 KC10109 KC10110 KC10111 KC10112 KC10113 KC10114 KC10115 KC10116 KC10117 KC10118 KC10119 KC10120 KC10121 KC10122 KC10123 KC10124 KC10125 KC10126 KC10127 KC10128 KC10129 KC10130 KC10131 KC10132 KC10133 KC10134 KC10135 KC10136 KC10137 KC10138 KC10139 KC10140 KC10141 KC10142 KC10143 KC10144 KC10145 KC10146 KC10147 KC10148 KC10149 KC10150 KC10151 KC10152 KC10153 KC10154 KC10155 KC10156 KC10157 KC10158 KC10159 KC10160 KC10161 KC10162 KC10163 KC10164 KC10165 KC10166 KC10167 KC10168 KC10169 KC10170 KC10171 KC10172 KC10173 KC10174 KC10175 KC10176 KC10177 KC10178 KC10179 KC10180 KC10181 KC10182 KC10183 KC10184 KC10185 KC10186 KC10187 KC10188 KC10189 KC10190 KC10191 KC10192 KC10193 KC10194 KC10195 KC10196 KC10197 KC10198 KC10199 KC10200 KC10201 KC10202 KC10203 KC10204 KC10205 KC10206 KC10207 KC10208 KC10209 KC10210 KC10211 KC10212 KC10213 KC10214 KC10215 KC10216 KC10217 KC10218 KC10219 KC10220 KC10221 KC10222 KC10223 KC10224 KC10225 KC10226 KC10227 KC10228 KC10229 KC10230 KC10231 KC10232 KC10233 KC10234 KC10235 KC10236 KC10237 KC10238 KC10239 KC10240 KC10241 KC10242 KC10243 KC10244 KC10245 KC10246 KC10247 KC10248 KC10249 KC10250 KC10251 KC10252 KC10253 KC10254 KC10255 KC10256 KC10257 KC10258 KC10259 KC10260 KC10261 KC10262 KC10263 KC10264 KC10265 KC10266 KC10267 KC10268 KC10269 KC10270 KC10271 KC10272 KC10273 KC10274 KC10275 KC10276 KC10277 KC10278 KC10279 KC10280 KC10281 KC10282 KC10283 KC10284 KC10285 KC10286 KC10287 KC10288 KC10289 KC10290 KC10291 KC10292 KC10293 KC10294 KC10295 KC10296 KC10297 KC10298 KC10299 KC10300 KC10301 KC10302 KC10303 KC10304 KC10305 KC10306 KC10307 KC10308 KC10309 KC10310 KC10311 KC10312 KC10313 KC10314 KC10315 KC10316 KC10317 KC10318 KC10319 KC10320 KC10321 KC10322 KC10323 KC10324 KC10325 KC10326 KC10327 KC10328 KC10329 KC10330 KC10331 KC10332 KC10333 KC10334 KC10335 KC10336 KC10337 KC10338 KC10339 KC10340 KC10341 KC10342 KC10343 KC10344 KC10345 KC10346 KC10347 KC10348 KC10349 KC10350 KC10351 KC10352 KC10353 KC10354 KC10355 KC10356 KC10357 KC10358 KC10359 KC10360 KC10361 KC10362 KC10363 KC10364 KC10365 KC10366 KC10367 KC10368 KC10369 KC10370 KC10371 KC10372 KC10373 KC10374 KC10375 KC10376 KC10377 KC10378 KC10379 KC10380 KC10381 KC10382 KC10383 KC10384 KC10385 KC10386 KC10387 KC10388 KC10389 KC10390 KC10391 KC10392 KC10393 KC10394 KC10395 KC10396 KC10397 KC10398

No text on this page: it may be a figure. Open the PDF to see it.

Note:

Remarks:

Informazioni:

Information:

Al f ine di gestire le varianti alla configurazione base, in relazione all’emissione de l Bollettino Tecnico, preghiamo di voler compilare il presente modulo in tutte le sue parti e spedirlo all’indirizzo sopra indicato. Si ringrazia per la gentile collaborazione data.

We request your cooperation in filling this form, in order to keep out statistical data relevant to aircraft configuration up- to-date. The form should be filled in all its parts and sent to the above address. We thank you beforehand for the information given.

MODULO APPLICAZIONE BOLLETTINO TECNICO

TECHNICAL BULLETIN COMPLIANCE FORM Data:

Date:

Numero:

Number:

Revisione:

Revision:

Prego spedire a questo indirizzo:

Please send to the following address:

AGUSTAWESTLAND S.p.A.

CUSTOMER SUPPORT & SERVICES - ITALY PRODUCT SUPPORT ENGINEERING DPT.

Via del Gregge, 100 21015 Lonate Pozzolo (VA) - ITALY Tel.: +39 0331 664905 Fax: +39 0331 664684 Telefono:

Telephone:

Fax:

Data Applicazione B.T.:

B.T. Compliance Date:

Denominazione Cliente ed Indirizzo:

Customer Name and Address:

Modello Elicottero Helicopter Model S/N Matricola Tail Number Ore Totali Total Hours Ore D.U.R. T.S.O.